Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.5 LAccepted-AOC BIDHAN NAGAR MANKAR ROAD PO PS BUD BUD DIST PURBA BARDHAMAN PIN 713403 | BUD BUD | PURBA BARDHAMAN | WEST BENGAL | 713403 | L1 | Accepted-AOC LOWEST RATE QUOTED | |
| 2 | L2₹37.0 L+₹47,953.10 (1.31%)Rejected-AOC | L2 | Rejected-AOC HIGHER RATE QUOTED THAN L1 | |
| 3 | L3₹37.0 L+₹49,755.20 (1.36%)Rejected-AOC | L3 | Rejected-AOC HIGHER RATE QUOTED THAN L1 | |
| 4 | L4₹37.3 L+₹85,093.60 (2.33%)Rejected-AOC | L4 | Rejected-AOC HIGHER RATE QUOTED THAN L1 | |
| 5 | L5₹44.1 L+₹7.6 L (20.8%)Rejected-AOC PANAGARH BAZAR RONDIHA MORE GT ROAD DIST PASCHIM BURDWAN PIN 713 148 WB | PANAGARH | PASCHIM BURDWAN | WEST BENGAL | 713148 | L5 | Rejected-AOC HIGHER RATE QUOTED THAN L1 |
Tender Value
₹49.7 L
EMD Value
₹95,800
Closing Date
9 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2023_MES_608703_1
8400-999/E8
Open Tender
Civil Works
Works
180 days
PANAGARH
Class D and Category a (i) (Building)
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹95,800
Yes
28 Aug 2023
12 Jul 2023
10 Aug 2023
12 Jul 2023
9 Aug 2023
26 Jul 2023
Amount
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep for foundation etc or for shafts n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed
M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) as in bed concrete for foundation filling & mass concrete complete all as specified and directed
M&L for brickwork with old size fly ash bricks straight or curved on plan to any radius in half brick thick walls in CM (1:6) complete all as specified and directed
Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and directed
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter for rough finished surfaces of concrete complete all as specified and directed
M&L for formwork for rough finished surface of concrete (flat surface) to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified and directed
M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for fair finished surfaces of concrete complete all as specified and directed.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for rough finished surface, not exceeding 200m thick (Horizontal or sloping) complete all as specified and directed
M&L for reinforced cement concrete (Design Mix) M-25 (using 20mm graded stone aggregate) foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc. and mass concrete etc complete all as specified and directed
M&L for reinforced cement concrete (Design Mix) M-25 (using 20mm graded stone aggregate) in columns, pillars, piers, etc complete all as specified and directed.
M&L for reinforced cement concrete (Design Mix) M-25 (using 20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed
M&L for reinforced cement concrete (Design Mix) M-25 (using 20mm graded stone aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed..
All as per item No 15.00 mentioned here-in-above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed..
M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete wall surfaces Finishing the surfaces fair and even complete all as specified and directed.
Supply only Integral Water proofing compound complete all as specified and directed. (Makes : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)
M&L for rendering 15 mm thick cement plaster in CM (1:6) on external fair faces of brick/concrete work surfaces finished even and smooth (without using extra cement) incl WPC (WPC will be measured and paid separately).
M&L for rendering 10mm thick on fair faces on roof surfaces of concrete surfaces in cement mortar (1:4) mixed with water proofing compound complete all as specified and directed. Note:-WPC measured and paid separately complete all as specified and directed.
M&L for preparation of new surfaces of roof and applying two coats of Polyurethane (PU) acrylic based water proofing liquid compound over and including one coat of self priming primer @ one litre per 10 Sqm with reinforcing fabric sheet as per manufacturer's instructions to stop leakage/seepage from roof/wall complete all as specified and as directed by the Engr-in-Charge Notes :- (i). As per description of this item, minimum two coats of Polyurethane (PU) acrylic based water proofing liquid compound over one coat of primer shall be carried out as per manufacturer's instruction. Please note no price adjustment shall be made, if as per manufacturer's instructions more coats of Polyurethane (PU) acrylic based water proofing liquid compound and primer are required for roof treatment. (ii). Quoted Rate shall be deemed to be included for work in building/structure of any height.
M&L for rendering 5 mm thick in CM (1:3) on fair faces of brick work or concrete wall surfaces & finishing the surfaces fair and even on ceiling complete all as specified and directed.
M&L for preparation of new plastered surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)
M&L for preparation new plastered surfaces and applying three coat of white washing on ceiling complete all as specified and directed
M&L for broken stones or boulders of hard core gauge n.exc 63mm deposited, spred and levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces complete all as specified and directed.
M&L for 75 mm thick PCC type C-1, 1:3:6 as in sub base and plinth protection (using 20 mm graded stone aggregate) finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) 25 mm thick as in floor for receiving screed bed for floor finishes complete all as specified and directed.
M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE
S&F pillar taps, cast copper alloy, with capstan heads, chromium plated fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long with aluminium alloy brackets and guard rail complete all as specified and directed
S&F in tubular towel rail /towel ring 20mm dia D type and 60cm long between flanges of brass chromium plated complete all as specified and directed.
S&F in stop valve cast copper chromium plated concealed with long shank type screwed down, high pressure with capstan head suitable for 15 mm bore complete all as specified and directed
S&F in grating square 150 mm size of PTMT (Minimum weight 100gms) complete all as specified and directed
S&F 15 mm dia galvanized pipes medium grade with all fittings and fixed complete wall and ceiling or laid in floors complete all as specified and directed.
M&L for glazed ceramic tiles 300 x 450 mm x 7 mm thick in vertical surfaces such as risers, skirting and dados, set and jointed in neat cement slurry and pointed in coloured cement to match including back coat of 10 mm thick cement plaster in CM 1:3 on brick or concrete surfaces complete all as specified and directed. Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvant cement, and S&F in the frame at side as per specification and drawing.
S&F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
S&F Powder coating Anodised aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed
S&F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed
S&F sheet glass 5.5 mm thick , ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.
S&F 100 mm size butt hinges extruded aluminium alloy with galavanised mild steel hing pin anodised and fixed type C-21 complete all as specified and directed
S&F 200 mm long Aluminium, anodised, barrel tower bolt of extruded section complete all as specified and directed.
S&F aluminium handles, cast type, anodised 150mm long complete all as specified and directed.
S&F 300 mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy and fixed complete all as specified and directed.
S&F vitreous china wash down water closet pan, pedestal pattern Pedestal pan and trap(excluding flushing cistern and flush pipe),connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc and including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel CP or aluminised hinging device all as specified and directed.
S&F Vitreous china squatting pan Orissa pattern of size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, antiphoner connection pipe etc complete making good disturb surface with existing finish of floor all as specified & directed by Engineer-in-Charge.
S&F PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe complete all as specified and directed.
S&F vitreous china wash basin, white, flat back, size, 550X400mm including bracket for fixing 32 mm waste coupling, waste pipe etc complete all as specified and directed.
Supply only Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern etc complete all as specified and directed
S&F PVC connection 15 mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F soap dish, vitreous china white, approximate size 160 x 160 x 90mm complete all as specified and directed
S&F PVC (SWR) floor trap 75mm dia of outlet plain with grating including jointing with solvent cement complete all as specified and directed
S&F PVC (SWR) bends any radius of 75 mm bore with access door complete all as specified and directed.
S&F 125 mm Brass Chromium Plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed
S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as directed by Engg-in-charge.
S&F Vitreus China bowl urinal flat back Size of 465 x 355 x 265 mm white with grating and union for discharge pipe complete all as specified and directed.
S&F Urinal Spreader of PTMT any colour for fixing with 15 mm dia pipe complete all as specified and directed
M&L for laying Reinforced concrete pipes 150 mm in dia, class NP2, laid and jointed complete with collars complete all as specified and directed .
M&L for Concrete bed to 150 mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C2 using 40mm graded stone aggregate complete all as specified and directed
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.
M&L for Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/loose soil complete all as specified and directed
M&L for Cement concrete type (C-2) 1:3:6 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete and as in post holes complete all as specified and directed
S&F roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe-410-W (Gde-E-250) quality-A complete all as specified and directed
S&F Pre-painted galvalume aluminum zinc coating @150 GSM GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridges fixed with self tapping screws as specified & directed.
M&L for preparation surfaces of steel over 10 cm width or girth and apply of two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed
Excavating over areas, n.exc 1.5 m deep and getting out in soft/loose soils complete all as specified and directed
M&L for 200mm thick kankar or laterite, with mix of fly ash, clinker & stone dust in the proportion of 1:3:6 (i.e 10% fly ash, 30% clinker & 60% stone dust) laying in layers n.exc 10cm thick, watering, ramming and compacted to required camber and gradient complete all as directed by Engr-in-charge.
M&L for 100mm thick PCC type D2, 1:4:8 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.
M&L for 100mm thick Cement concrete type B- 2, 1:2:4 (using 20mm graded stone aggregate) as in floors finished even and fair complete complete all as specified and directed
M&L for forming Contraction (Dummy) jointa 65 mm deep x10mm wide, filled with sealling compound Á (Cold applied polysuiphide/polyurethane joint sealant will be used) complete all as specified and directed
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and smooth on walls in cement mortar (1:4), using water proofing compound complete all as specified.(WPC will be measured and paid separately)
M&L for preparation on new plastered surface of wall, chajja, parapet etc and applying two coats of cement abse paint over a coat of acrylic primer etc complete all as specified and as directed.
Moorum/red bajri filling in floors or in foundation, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.
S&F framed work as in doors or gates of angle or other section, gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete etc. Fe-410-W (Gde-E-250) quality-A complete all as specified and as directed.
S&F for 1mm thick Plain, black mild steel sheeting in stepped flashings as coverings (measured as the minimum rectangle from which the pieces can be cut required) complete all as specified and as directed.
Rough excavation not exceeding 1.5 m deep and getting out in soft/loose soils complete all as specified and as directed.
M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6 mtr mean redious built in CM 1:6 complete all as specified and directed.
S&F 20 mm dia galvanized pipes medium grade with all fittings and fixed complete wall and ceiling or laid in floors complete all as specified and as directed.
S&F 25 mm dia galvanized pipes medium grade with all fittings and fixed complete wall and ceiling or laid in floors complete all as specified and as directed.
S&F 25 mm bore Gun-metal, globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed complete all as directed by Engr-in-charge.
S&F Rotational moulded polyethyline water storage tanks 500 ltrs ( Cylindrical vertical with closed top minimum three layer) hoisted and fixed in position all as directed by Engr-in-charge Make :-Sintex/Prayag/Vectus
S&F 15 mm bore angle valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed..
S&F 25 mm dia float valve, PTMT high pressure of epoxy coated Aluminium rod and high density plastic ball (200 gms), screwed for iron pipes or brasas ferrule, complete all as per specified and as directed by Engr-in-charge. Make:Prayag/Hindware/Vectus
M&L for machine cut kota stone slab flooring 20-25mm thick over 15mm thick cement screed bed in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
S&F Bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.
S&F anodised aluminium snap grid frame work size of grid 605 x 605 mm for false ceiling complete all as specified and directed
M&L for hanger 6mm dia G.I (upto 1200 mm length) adjusted level fixed to roof slabs by means of ceilling cleat made out of GI flat 40x3 mm size 60mm long and expansion hold fastener 12.5 mm dia 40 mm long including dismantling complete all as specified and directed.
S&F for 6mm thick 'E' board (non asbestos fibre) designer building boards fixed in aluminum frame work in ceiling flat or sloping with screws including dismantling of wall or ceiling boards complete all as specified and directed..
E/M PORTION M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
All as per item No 90.00 mentioned here-in-above but 5 Amp socket on same board with other switches complete all as specified and directed.
All as per item No.90.00 above but One 3 pin 5 Amps socket out let points on independent board using 2.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables complete all as specified and directed
S&F switch,16 Amps 230/240 V complete all as specified and as directed .
S&F socket outlets 2 in 1, 3 pin, 5/6 Amps flush type 230/240 V complete all as specified and as directed.( For Same Board only)
S&F socket outlets 3/5 pin,16 Amps for Same Board flush type 230/240 V complete all as specified and as directed .
S&F switch piano flush type, single pole , 5/6 Amps, one way complete all as specified and directed
S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified and directed
S&F stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified and directed.
S&F LED light fitting 1x 20 W LED light AC decorative box type with driver , holder including LED tube light connecting up with with complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete all as specified and directed
S&F recessed mounted 2' x 2 ' LED luminaire 36 watts for grid ceiling minimumm lumen output 100 lumen/Watt, pre-treated CRCA frame powder coated with diffused Profied including necessary connection complete all as specified and directed.
S&F submain two single core 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable PVC insulated unsheathed 1100 volts grade drawing in and suitable size PVC conduit (ISI Marked) concealed including 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 volts grade earth wire complete all as specified and directed (Note: (i) Three runs cable and PVC conduit will be measured as a single unit. (ii) Quoted rate shall be included for necesasry chasing, cutting and making good as per existing specification)
Supply and fixing security light fittings 35 watts 230v, minimumm lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65/66 including necessary connection complete suitable for service brecate dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as directed. Make:Bajaj/Crompton/Phillips
S&F LED light fitting 2 FEET 1x10 W LED MIRROR light AC decorative box type with driver , holder including LED tube light connecting up with with complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete all as specified and directed.
S&F metallic Exhaust ventilation fan of sweep 230 mm sweep, 230volt AC heavy duty complete with louver and all accessories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing connected with twin core twisted flexible copper conductor (23/0.0076) of size complete all as directed by Engr-in-Charge.
S&F ceiling fan 1200 mm sweep of 5 star rating with twin core twisted flexible copper conductor (23/0.0076) of size, complete all as specified and directed.
S&F epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed Make :Havells/ABB/Legrand.
S&F epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed
S&F MCB SPN 6-32 Amps, 'C' curve, 240 Volts and to be housed in DBs complete including necessary connection all as specified and directed (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).
S&F MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessary connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).
S&F MCB SPN, 40 Amps, 'C' Curve 10kA, 240 Voltsand to be housed in DBs including necessary connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).
M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.
S&F XLPE armoured cable 16 sqmm 2 core,1100 volts grade heavy duty cable,ISI marked passing through pipe, with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed complete all as sepcified.
All as per Item No 112.00 mentioned here-in-above but Cable size 10 Sqmm 2 Core complete all as sepcified.
Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed. (Note : Punned thickness shall be measured).
M&L sub class B bricks locally available of size 25 x 12.5 x 7.5 cm laid dry width wise across the line of cable in trenches for protection of UG cable complete.
S&F GI light grade 40mm dia of size for road cutting, wall cutting, floor cutting etc all as directed by Engr-in-charge.
All as per item No 116.00 mentioned here-in-above but 50 mm dia complete all as specified and directed.
S&F 1000 litr rotational / moulded Polyehtylene water tank (Cylindrical vertical with closed top miniumum three layer) hoisted & fixed in position all as specified directed . Make :-Sintex/Prayag/Vectus
S&F galvanised steel tubes, medium grade with bore of pipe in 25 mm with all fittings laid in treanches complete all as specified and directed.
All as per item No 119.00 mentioned here-in-above but 40 mm bore complete all as specified and directed.
S&F 40 mm bore dia pipe gun metal globe or gate valves, yoke type, full opening with iron wheel head, screwed both ends heavy duty, ISI marked complete for iron pipes complete all as specified and directed.
Supply , installation , commissioning of Glass top deep freezer of capacity not less then 320 ltrs GLS, single phase 240 Volt 50 Hz,Precoated inner liners, castor wheels ,UV grade plastic materials,signal indicator, PUF insulation and powder painted body stablizer free all as directed by Engineer -in-Charge. Make: Voltas/Bluestar/Haier
M&L for One 3 pin socket outlet, 15 Amps, independent, with FLRSH cables 4 sq. mm size (Nominal area) PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper concuctor in and including PVC casing and caping including accessories along with continuous earth wire 2.5 Sqmm PVC insulated, unsheathed stranded copper conductor cable and connected to common earth dolly, with and including 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0 mm thick hylam sheet cover fixed with brass screw complete with all accessories all as directed by Engr -in-Charge.
S&F Switch socket combination 2 in 1, 5 pin, 5/16 amp flush type all as directed by Engineer -in-Charge.
S&F bulk head fitting LED type wall mounted 10 watt CCT 6500K complete all as specified and directed.
Supply and fix Geyser 25 Ltrs, BEE 5 Star rating with hot and cold connection pipe, nut and bolts including all accessories complete all as specified and as directed. Make:Havells/Usha/Bajaj/CG
MS ROYAL CONSTRUCTION INDEX NO 158 2010 BKP
M/S DEBNATH MONDAL
M/S S M ENTERPRISE
M/s Raj Kumar Chopra
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .