Construction of compound wall on west side and south side at existing Anna Salai 33 / 11 KV Indoor SS

Amount

Earth work excavation in all soils and subsoils, hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders with an initial lead of 10m and initial lift of 2.50m in including all materials labour, T&Ps etc., complete.

Supplying and filling in foundation and basement with filling Sand in layers of not more than 15 cm thick well rammed, watered and compacted complete, as per standard specification

Laying plain cement concrete M10 mix using 220kg minimum cement content and using 20mm HBG (machine broken) for foundation and basement leveling course including cost of all materials, lead, lift and labour complete as per std.specification.

Laying RCC in M25 design mix using 12mm to 20mm down graded metal and 400Kg/m3 minimum cement content for various types of work for grade beam, column, footing and column Below G. L., etc., including chipping the piles up to cut off level, complete. (excluding reinforcement)

Column upto basement

Grade Beam

Ground floor column

Tie beam

Supply, fabrication and placing in position of MS / RTS / TMT grills(Fe 415 Grade steel) for reinforced cement concrete works including cost of steel, binding wire, labour, lead, lift, etc., complete.

Brick Masonry in cm 1:6. using II class chamber burnt bricks of size 230x110x70mm at all levels including cost of all required materials, labour, lead, lift, etc., complete as per std specification and direction.(Ground floor)

Plastering with cement 1: 5, 12mm thick, Inside/outsidemortar over the concrete/BM surfaces at all levels both outside and inside of the building including cost of all materials, hacking the surfaces, scaffolding, lead, lift, curing, etc., complete as per the std. specification and direction.

Outside Wall paint with best quality Plastic Emulsion of approved Colour two Coats over a primer using white Cement and putty over plastered surface at all levels including cost of all materials, scaffolding,leads,lifts,labours, brushes curing etc., complete.

Supplying, fabricating and fixing in position of MS grills gates, , at various levels as per approved design of the Engineer, including cost of steel and other required materials, labour charges, transportation and fixing, taking grooves in BM/RCC, packing the pockets with CC and painting with one coat metal primer complete.