PROVN OF SEGREGATION SHEDS AND COVERED SHEDS FOR MACHINERIES FOR SOLID WASTE MGE AT FORT WILLIAM AND NEARLY LOCATIONS AND ADDN/ ALTN TO 2 X TOILETS IN SM-13 INSIDE FORT WILLIAM UNDER GE (FW) KOLKATA

Amount

(B/R PORTION) Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing tiles from site and rubbish off the premises complete all as directed.

M&L 40mm thick cement concrete type B0, 1:2:4, (using 12.5 mm graded aggregate) as in sub base for floor complete all as specified and directed.

Material & labour for plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in lintels over 1.5 m clear span, cills, steps, seismic and other similar bands plinth cources, roof kerbs or mud stops, benching, coping, bed plates, parapets, water through and the like etc including weathering, slightly rounded or chamfered angles throating etc complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillars etc all as specified and directed.

M & L brick work using old size sub class 'B' bricks straight or curved on plan to any radius in half brick wall, built in cement mortar 1:4 complete all as specified and directed.

M & L for brick work using old size sub class 'B' bricks straight or curved on plan exec 6 metre mean radius, built in cement mortar 1:6 all as specified and directed.

Supply and fix non skid ceramic coloured tiles 9 to 10 mm thick (square/ rectangular) area of each tile exc 0.16 sqm but n exc 0.36 sqm in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and incl 10 mm rendering in CM 1:3 complete all as directed.

Material and labour for 300mm X 600mm X 8-9mm thick decorative type wall tiles (coloured) joint free as in vertical surfaces of and jointed with neat cement slurry and pointed in white/coloured cement to match the surface laid over and including 10mm thick rendering in CM(1:3) complete all as specified and as directed.

S&F 18 - 20 mm thick granite slab cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pavement to match the shade of granite stone incl grinding and polishing over and including 20mm screed bed in CM(1:6) complete all as specified and as directed.

S&F 20 mm thick granite slab as in vertical surfaces cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pavement to match the shade of granite stone incl grinding and polishing over and including 10mm rendering in CM(1:3) including dismantling old one completed all as directed.

S&F 10 mm thick toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and as directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed completed all as specified and as directed.

S&F powder coated aluminium door frame and operable shutter, windows and partitions and ventilators with one or more rebates including jointing cleat for fixing etc , complete all as specified and as directed.

S&F table top wash hand basin (565X425X140mm size) with sensor operated automatic water dispensing brass CP swan neck pillar tap as approved, with all brass CP connected assosaries like coupling and waste pipe, connection pipe etc and fixed in position as per manufacturers instructions complete all as specified and as directed. Make :- Basin : Jaquar CAT NO: KUS-WST-35935 or equivalent Pillar Tap : Jaquar CAT NO: SNR1449 or equivalent make specified in tender.

S&F vitreous china floor mounted coupled closet (Pedestal pattern) coloured including low level vitreous china valveless symphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, PVC coloured seat cover and connecting fittings complete all as specified and directed. (Make : PARRYWARE, Model : Cascade NXT / CERA, Model : CLAIR / HINDWARE, Model: CONSTELLATION or equivalent make specified in tender.

S&F Chromium plated brass Towel ring (premium quality) complete all as specified and directed. (Make : Ess-Ess, Cat No: AC-502 / JAQUAR, Cat No: ACN-1121BN / PARRRYWARE, Cat No: T6002A1 / PRAYAG, Cat No: BA-11 or equivalent make specified in tender.

S&F s, Tubular towel rail (premium quality), 20mm dia, 600 mm long between flanges including brass chromium plated, complete all as specified and directed. (MAKE : JAQUAR, Cat No : ACN-111SM / PARRYWARE, Cat No : T6401A1 / ESS ESS, Cat No: AC-101 / CERA, Cat No: F5004103 / PRAYAG, Cat No: BA-20 / HINDWARE, Cat No: F840013 ) or equivalent make specified in tender.

S&F 6mm thick moulded / bevelled edge mirror of size as required fixed on 6mm thick acrylic PVC sheet complete fixed at walls with brass chromium plated camouflaged nut washer and bolt screws complete all as specified and directed.

Taking down cement plaster in any description on brick or stone wall etc incl racking out joints. hacking for key scrubbing down with water etc complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:6) to fair faces of brick or concrete wall surfaces finished even & smooth without using extra cement all as specified and directed by Engineer -in-Charge.

M&L for 10 mm thick rendering in cement mortar (1:4) to fair faces of brick or concrete ceiling surfaces finished even & smooth without using extra cement all as specified and directed by Engineer -in-Charge.

M&L for preparation of newly plastered ceiling surfaces and applying two coats of Oil Bound Distemper over a coat of alkali resistant primer over 2 mm thick wall care putty complete all as specified and directed by Engineer -in-Charge.

M&L for preparation of newly plastered wall surfaces and applying two coats of Oil Bound Distemper over a coat of alkali resistant primer applied over over 2 mm thick wall care putty complete all as specified and directed by Engineer -in-Charge.

M&L for applying two coats of oil bound distemper to old decorated (distempered) surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) over 2 mm thick wall care putty complete all as specified and directed.

Supply and fix, as , 15 mm bore bib taps, fancy type, chromium plated long neck cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F s 15mm dia soap dish, square, acrylic body with chromium plated base complete all as specified and directed. (Make : Jaquar, Cat No : AKP-35731P / PARRYWARE, Cat No: T6403A1 / ESS ESS, Cat No: AC-103 / PRAYAG, Cat No: BA-35 or equivalent make specified in tender.

S&F CP bottle trap with internal portion 32mm size with 190mm long wall connection pipe complete all as specified and directed (Make: JAQUAR, Cat No: ALD-769L250x190 / ESS ESS, Cat No: C-231C / HINDWARE, Cat No: F850003 / CERA, Cat No: F8060302/ PRAYAG, Cat No: BEA-26) or equivalent make specified in tender.

S & F 15mm bore galvanised steel tubing (medium grade) with all fittings and fixed to walls and ceiling or laid in floors complete all as directed.

S & F 20mm bore galvanised steel tubing (medium grade) with all fittings and fixed to walls and ceiling or laid in floors complete all as directed.

S&F Chromium plated brass Angular stop cock, fancy type, concealed type with wall flange fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : JAQUAR, Cat No: CON-59KN / PARRYWARE, Cat No: G1453A1 / ESS ESS, Cat No: C-206 / CERA, Model: OCEAN / PRAYAG, Cat No: 9210 / HINDWARE, Cat No: F330043) or equivalent make specified in tender.

M&L for applying one coat of synthetic enamel paint to old painted steel surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed .

M&L for applying one coat of synthetic enamel paint to old painted wooden surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed.

S&F 15mm bore chromium plated two way bib cock with flange, fancy type complete all as specified and as directed. (Make : Ess Ess, Cat No: C-203 / JAQUAR, Cat No: CON-041KN/ PARRYWARE, Cat No: G1434A1 / CERA, Model : OCEAN / PRAYAG, Cat No: 9212/HINDWARE, CAT No: F330004CP) or equivalent make specified in tender.

Supply and fixing chromium plated toilet tumbler holder (including with tumbler and chromium plated wall flange), fixing with stainless steel screws complete all as specified and as directed by the Engineer-in-Charge. (Make : Jaguar cat No. CAN 1141 N or equivalent make specified in tender.

S&F toilet paper holder, surface type with flap complete all as specified and directed. (Make : JAQUAR, Cat No : CAN-1153N / CERA, Cat No: F5007110 / PRAYAG, Cat No: BA-38 / ESS ESS, Cat No: AC-506 / HINDWARE, Cat No: F880003) or equivalent make specified in tender.

S&F s towel rack (premium quality) with lower hangar with hook complete all as specified and directed. (Make : JAQUAR, Cat No: AHS-1581H / ESS ESS, Cat No: AC-308 / PARRYWARE, Cat No: T6008A1 / CERA, Cat No: F5003101 / PRAYAG, Cat No: BA-12) or equivalent make specified in tender.

Supply and fix s Low density polyethylene pipe connection, comprising of 15 mm dia 450 mm long having PTMT union at each end of connection to each of pillar tap/cistern/stop cock/urinal etc. at one end, stop cock at other end complete all as specified and directed. (MAKE : PRAYAG, Cat No. 323 / POLYTUF, Cat No. 4003 or equivalent make specified in tender.

Supply and fix s Low density polyethylene pipe connection, comprising of 15 mm dia 600 mm long having PTMT union at each end of connection to each of pillar tap/cistern/stop cock/urinal etc. at one end, stop cock at other end complete all as specified and directed. (MAKE : PRAYAG, Cat No. 323 / POLYTUF, Cat No. 4003 or equivalent make specified in tender.

S&F Mono block water pressure pump set of capacity 0.50 HP single phase , discharge range 36-60 Lpm , working in voltage range 220-240 V with operating pressure range 1.4 -2.4 (Bar) complete including with closed discharge valve and connected fittings complete all as specified and as directed . Make: KILOSKAR - ETERNA, Model SJPBS 42420- HL or equivalent make specified in tender.

S&F s Chromium Plated 25mm dia brass chromium plated curtain rod with fixing brackets, stops, rollers etc complete all as specified and directed.

S&F s fancy type metal finish curtain bracket fixed to walls complete all as specified and directed.

S&F bathing cubical with steam shower cabin of 1000mm/3.25 ft radios suitable for fit in corners, having 3 KW steam machine, Digital control panel with all Morden facilities like soft touch digital control, DC control for automatic protection, music system with FM and blue tooth connectivity and speaker, telephone answer, stream temperature display/adjust and shower system with hot and cold water mixer, diverter, multi functional sprinkler body jets, over head shower, multi flow hand shower and lightings of backside blue LED lights, overhead white LED lights including acupuncture foot massager, exhaust fan, mirror, drain set-popup waste with flexible pipe complete all as specified and as directed. Make : Desire Steam Shower Cabin (3.25' Corner) of M/S Madonna Home Solutions or equivalent make approved by Accepting Officer.

S&F Factory made single extruded fully solid WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65X125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibbers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately).

S&F 100 mm butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and as directed.

S&F 150 mm Extruded brass handles, fabricated type polished complete all as specified and directed.

S&F 200 mm Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.

S&F 200 mm brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.

S&F 140 mm Floor door stopper of brass body and tongue with hard drawn steel spring complete all as specified and as directed.

S&F Stainless steel wall mounted tissue paper dispenser of approved make complete all as specified and as directed. Make : Jet India Cat part No JI-TDP-01 or equivalent make specified in tender.

S&F Rotational moulded polyethylene water storage tanks of 1000 ltrs capacity with closed top and fixed in position as per SSR Part I instructions with including dismantling water tanks and removing to store capacity 1000 Ltrs all as directed.

Supply and fixing 5.5 mm thick sheet glass frosted on one side, area in squares exc 0.5 sqm in each pane and glazing with rubber gasket fixed to aluminium frame work / snap beading complete all as specified and as directed

S&F Solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed.

Cutting holes in to brick wall for inserting bold fast & making good dismantled portion in cm (1:3) or PCC (1:2:4) type B1, exe half brick but not exe 1 brick complete all as specified and as directed.

S & F mild steel work holdfast, cleat etc. for door frame/ wooden batten etc. quality conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S&F cast Iron , rain water socket pipes 100mm bore (dia), sand cast, in any Length with ears, with cement Joints in cement Mortar 1:1, fixed to walls/floor complete all as specified and as directed.

S&F 100mm dia CI bends or elbows, square or obtuse complete all as specified and as directed.

S & F 50 mm bore UPVC pipes (SCH-80) with all fittings and fixed to walls and ceiling or laid in floors complete all as directed.

Excavating in post holes hard / dense soil (or similar holes) each n. exc 0.50cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface in any type of soil.

Removing excavated material exc 250m but n exc. 500m and depositing where directed at a level n exc. 1.5 m above the starting point in any type of soil all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete wall surfaces in CM 1:4 finished rendering is to be finished even and smooth without using extra cement complete all as specified and directed

S&F for liquid water proofing compound complete all as specified and directed.

Material and labour for applying two coats of cement base paint including preparation of new or previously untreated surfaces of wall all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in hard/ dense soil all as specified and directed.

M&L for hardcore broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed.

M&L for 100 mm thick cement concrete type B-1, 1:2:4 using 20mm graded aggregate in floors finishing cement concrete surface even and smooth using extra cement complete all as specified and directed.

S&F for Steel work in tubular trusses in roof trusses (framed), trussed, posts purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed

S&F for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of grade Fe-410- W(Gde- E-250) quality- B complete all as specified and directed

M&L for new steel and iron surfaces apply two coats of synthetic enamel paint over one coat of red oxide of any description, over 10cm in width or girth, not otherwise described complete all as specified and directed.

S&F for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

Mild steel work as in post and struts in fencing including cutting tops to shape as diredcted, drilling holes, notching for wire,etc ,flat iron fillets for securing wire mesh etc, including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe 290 Gde E-165 complete all as specified & directed.

Mild steel work as in flat iron fillets for securing wire mesh etc. including all necessary drilling ,bolting or riveting, etc. and similar work conforming to Fe 290 Gde E-165 complete as specified and directed.

Mild steel round bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (Annealed) not less than 0.90 mm dia or securing with clips quality conforming to Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde -E-165).

Supply and fixing mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed other, or screwed both ends, each screwed ends to be fitted with washers and one hexagonal or square nuts exceeding 10cm but not exceeding 15 cm long, dia of sunk 11 mm to 15 mm all as specified and directed.

M&L for Fe-410-W Gde E-250 of quality "A' framed work such as steel doors, gates or other section with gusset plates ,rails, braces et., complete ,drilled for fiixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (Exclusive of steel sheeting or other covering, running rails and guides) and hanging ; also fatening and fixing complete all as specified and directed.

S & F 4 mm dia PVC coated galvanised mild steel chain link fencing of mesh size 50 x 50 mm fixed with straining bolts including line wire any mesh size and type to any type of standards, rails, straining bolts etc. including provision of binding wire, complete all as specified and as directed.

S& F 2.00 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with L type or J type or cranked hook bolts, complete all as specified and directed.

(E/M PORTION) M & L for concealed type point wiring with 1.50 sqmm (nominal area) FRLSH insulated and unsheathed muld stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC conduit complete with all fittings and accessories, fixed to walls/celling including muld steel terminal boxes 1.25 mm thick conforming to IS - 5133(Part -I) with 3.0 mm thick plastic laminated sheet top cover (ISI Marked ) for mounting switches/ regulator / bell push etc including 1.50 Sqmm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly, for one light point / bell point/ ceiling fan / exhaust fan point controlled by one way switch complete all as specified and directed. (a) One light point or one fan point or bell point controlled by one switch

All as per item No 82 above but one 3 pin socket outlet, 5 Amp independent

All as per item No 82 above but one 3 pin socket outlet, 5 Amp on the same board with other switches

All as per item No 82 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low Smoke (FRLSH ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 1.5 sqmm green solid copper conductor as continuous earth wire with lugs complete all as specified and directed.

S & F Modular Switch 1 way 6 A, 1 module complete all as specified and directed.

S & F Modular Switch 1 way 16 A, 1 module complete all as specified and directed.

S & F Modular Socket 6 A, 2/3 pin combined 2 module complete all as specified and directed.

S & F Modular Socket 6 A/ 16 A, 2/3 pin combined 2 module complete all as specified and directed.

S&F Ceiling rose three terminals polycarbonate , isolated body complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

M & L for sub main wiring with 2 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLSH PVC insulated & unsheathed copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through & including PVC conduit of suitable size in surface/concealed complete all as specified and directed.

S & F Sheet metal enclosure for MCB DB double door 240V single pole & neutral 8 way with common bus bar complete all as specified and directed.

S & F MCB 'C' series single pole 5 to 32 Amps, breaking capacity 10KA complete all as specified and directed. Make; Cat No. 408587 of Legrand or equivalent make as specified in tender.

S & F MCB 'C' curve single pole neutral , 40 to 63 Amps with breaking capacity 10kA,complete all as specified and directed. Make :Cat no. 603326 of Legrand or equivalent make as specified in tender.

Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.

MODERN AGENCY (BID ID -3180374)

M/S SRINIVASA CONSTRUCTION (BID ID -3182285)

MARUTI ENTERPRISES (BID ID -3182343)

AZIM ENTERPRISES (BID ID -3182300)

SINHA ENTERPRISE (BID ID -3181712)

Piu Projects (BID ID -3182431)

DGR CONSTRUCTION (BID ID -3183055)