Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.0 LAccepted-AOC | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹20.0 L+₹3.0 L (17.5%)Rejected-Finance SHIV BARI ROAD NEAR KASUMAL HOTEL BIKANER 334003 RAJASTHAN | BIKANER | BIKANER | RAJASTHAN | 334003 | L2 | Rejected-Finance Other than Lowest Bidder | |
| 3 | L3₹21.9 L+₹4.9 L (29.1%)Rejected-Finance | L3 | Rejected-Finance Other than Lowest Bidder | |
| 4 | L4₹22.1 L+₹5.1 L (29.8%)Rejected-Finance 6 U 34 JAWAHAR NAGAR SRI GANGANAGAR SRI GANGANAGAR RAJASTHAN 335001 | GANGANAGAR | RAJASTHAN | 335001 | L4 | Rejected-Finance Other than Lowest Bidder | |
| 5 | L5₹22.4 L+₹5.4 L (31.7%)Rejected-Finance | L5 | Rejected-Finance Other than Lowest Bidder |
| Sl No | Description | Qty | Unit | LAKSHMI ASSOCIATES L3 | RAJENDER ENTERPRISES L1 | M/s Rohit Construction Co. L2 | ANKIT JINDAL AND COMPANY L4 | KANINWAL ENTERPRISES L5 | T k Associates L6 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Supply , installation and testing of 16 M high mast shaft in two section suitable for 50 m/sec wind speed along with head frame, luminaires carriage suitable for 9 luminaires suitable for 250W LED FLOOD fitting in symmetrical arrangement and other accessories manufactured in factory with raising lowering system comprising double drum winch, 5mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightning finial including supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template and outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP contactor for the automatic switching of luminaires, power tool control with 2 No 9A contactors and raise lower push button, Incoming 25 sq. mm and out going 16 & 25.sq. mm terminals. Note : LED fitting shall be measured separately under relevant item of schedule .
HIGH MAST SYSTEM
Height of mast : 16 Meter
No. of Section : Two
Material Construction : S355 Grade as per BS-EN 10 025
Base dia and top diameter (A/F) : Top : 150mm
: Bottom : 460mm
Cross section of Mast : 20 Side polygon
Standard for Galvanisation : as per BS EN ISO 1461
Size of Opening and door at base : 1200 x 250mm | 4 | Each Job | 3,60,300 ₹14,41,200 | 2,70,000 ₹10,80,000 Lowest | 3,00,000 ₹12,00,000 | 3,45,000 ₹13,80,000 | 3,49,000 ₹13,96,000 | 3,70,000 ₹14,80,000 |
| 1.01Diameter of base plate : 670mm Thickness of base plate : 25mm Lighting protection finial : GI single spike of length 1200mm Max. wind speed : 50m/s as per IS 875 (Part III) Number of foundation bolts : 12 Nos PCD of foundation bolts : 590 mm Type / diameter / length of foundation bolts : TS 600/30 mm dia/850 mm long Aviation Light : Set of two -1 No | |||||||||
| 1.02FOUNDATION DETAILS 1. Excavation dimensions 2800 x 2800 x 1500mm size 2. Lean Concrete 100 mm thick {1: 4: 8) D2 (using 40mm graded Aggregate) 3. Matt bars 12mm dia TMT Bars @ 200C/C both ways in double layers 4. RCC (1:1.5: 3) 2600 X 2600 X300MM as in footing 5. RCC (1 :1.5: 3) 1000 X 1000 X 1400 MM (1100MM below GL and 300 mm above GL) 6. 08 Nos 16mm dia TMT Bars 4 at comers 4 at centres of pedestal col as main bar with 600mm long cranking at bottom over matt bars 7. 16 Nos 12mm dia TMT main bars (4 Nos each at 4 side with 600mm long cranking at bottom over matt bars. 8. 10mm dia TMT bars @ 150mm C/C as Stirrups 9. 300mm dia 850mm long foundation bolts 08 Nos inserted in to 16 mm thick anchoring plate 590mm dia at bottom with pointed galvanised nut one each at bottom and top of plate. 10. Foundaiton bolt min clearance 150mm above pedestal col to rest high mast base plate 25mm thick over the bolts. Galvanised nuts 01 number at bottom of base plate 2 Nos at top of base plate. Note : The unit rate is inclusive of necessary formwork, RFR removal of surplus earth, external finishes and other unforeseen items all as directed by Engineer-in- Charge. | |||||||||
| 1.03LUMINAIRES CARRIAGE Material of construction : 50NB ERW Class B-M.S Pipe Diameter of carriage ring (mm) : 535 mm (ID) Construction : 06 Arm, Welded, 2 Sections Load carrying capacity : 9 Luminaire TRAILING CABLE Conductor : Copper, 5 core, 2.5 Sqmm Insulation : EPR insulated PCP sheathed No.of circuits per mast : One WINCH / POWDER TOOL Type /SWL of winch : Double drum, SWL 750 Kg - SGDD Method of Operation : Integral Motor Motor Capacity : 1.0 HP (Including suitable starter) No of Speeds : 6 Pole, single speed Torque Limitor : With Mechanical tripping Facility STAINLESS STEEL WIRE ROPE Grade / construction : AISI 316, 7/19 Construction Number of Ropes : Two Continuous Diameter (mm) : 6 mm Breaking load Capacity : 2350 Kg x 2 | |||||||||
| 2.00 | Supply, install,testing and commissioning 250 watt LED flood light ,min 110 lum/w,toughened glass,IP 66 with 10KA SPD, the help of suitable accessories including electrical wiring of luminaries with all wiring materials complete all as specified and directed | 36 | Each | 8,400 ₹3,02,400 | 6,300 ₹2,26,800 Lowest | 8,500 ₹3,06,000 | 9,500 ₹3,42,000 | 9,300 ₹3,34,800 | 8,550 ₹3,07,800 |
| 3.00 | Supply and laying UG cable XLPE insulated screened PVC bedded,galvanized steel strip or wire armoured electric power cables (heavy duty) 1100V with screened aluminium conductor of size 4 core 25 sqmm, complete all as specified and directed . | 625 | RM | 282 ₹1,76,250 | 306 ₹1,91,250 | 275 ₹1,71,875 | 249.04 ₹1,55,650 | 309 ₹1,93,125 | 190 ₹1,18,750 Lowest |
| 4.00 | Excavation in trenches not exc. 1.5 m wide and not exc 1.5 mtr deep in soft loose soil for laying / taking up/ taking down of cables and getting out and levelling of bottom surface to required level, complete all as specified and directed by Engineer- in- Charge. | 143.44 | CUM | 102 ₹14,630.88 | 108 ₹15,491.52 | 200 ₹28,688 | 383.7 ₹55,037.93 | 55 ₹7,889.2 Lowest | 100 ₹14,344 |
| 5.00 | Returning filling in Including spreading, levelling. Watering and well ramming soil in layers not exceeding 25 cm thick, complete all as specified and directed. | 84.17 | CUM | 30 ₹2,525.1 | 9 ₹757.53 Lowest | 20 ₹1,683.4 | 139.1 ₹11,708.05 | 100 ₹8,417 | 35 ₹2,945.95 |
| 6.00 | Removing excavated material (ie soil) from site to a distance n. exc 50 mtrs away and depositing where directed at a level n. exc. 1.5 mtr above the starting point all as specified and directed by Engineer-in-Charge. | 59.27 | CUM | 30 ₹1,778.1 | 9 ₹533.43 Lowest | 20 ₹1,185.4 | 320.4 ₹18,990.11 | 20 ₹1,185.4 | 35 ₹2,074.45 |
| 7.00 | Material and labour for tibba sand for filling in trenches below and around underground cables for cushioning of cables etc, complete all as specified. | 42.93 | CUM | 100 ₹4,293 | 90 ₹3,863.7 Lowest | 200 ₹8,586 | 600 ₹25,758 | 1,000 ₹42,930 | 95 ₹4,078.35 |
Tender Value
₹24.0 L
EMD Value
₹48,100
Closing Date
16 Jun 2026, 6:00 pmClosed
GE AF NAL
GE AF NAL
As mentioned and described in BOQ
2026_MES_768045_1
GE (AF) NAL /T-04/2026-27
Open Tender
Electrical and Maintenance Works
Item Rate
120 days
GE AF NAL
As per NIT and tender documents class E and above and category b (i)
9 documents required · 9 mandatory
₹500
GE AF NAL
₹48,100
Yes
28 Jul 2026
26 May 2026
18 Jun 2026
26 May 2026
16 Jun 2026
9 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply , installation and testing of 16 M high mast shaft in two section suitable for 50 m/sec wind speed along with head frame, luminaires carriage suitable for 9 luminaires suitable for 250W LED FLOOD fitting in symmetrical arrangement and other accessories manufactured in factory with raising lowering system comprising double drum winch, 5mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightning finial including supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template and outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP contactor for the automatic switching of luminaires, power tool control with 2 No 9A contactors and raise lower push button, Incoming 25 sq. mm and out going 16 & 25.sq. mm terminals. Note : LED fitting shall be measured separately under relevant item of schedule .
HIGH MAST SYSTEM
Height of mast : 16 Meter
No. of Section : Two
Material Construction : S355 Grade as per BS-EN 10 025
Base dia and top diameter (A/F) : Top : 150mm
: Bottom : 460mm
Cross section of Mast : 20 Side polygon
Standard for Galvanisation : as per BS EN ISO 1461
Size of Opening and door at base : 1200 x 250mm | 4 | Each Job | 1.25 | ₹5 |
| 1.01 | Diameter of base plate : 670mm
Thickness of base plate : 25mm
Lighting protection finial : GI single spike of length 1200mm
Max. wind speed : 50m/s as per IS 875 (Part III)
Number of foundation bolts : 12 Nos
PCD of foundation bolts : 590 mm
Type / diameter / length of foundation bolts : TS 600/30 mm dia/850 mm long
Aviation Light : Set of two -1 No | - | - | - | - |
| 1.02 | FOUNDATION DETAILS
1. Excavation dimensions 2800 x 2800 x 1500mm size
2. Lean Concrete 100 mm thick {1: 4: 8) D2 (using 40mm graded Aggregate)
3. Matt bars 12mm dia TMT Bars @ 200C/C both ways in double layers
4. RCC (1:1.5: 3) 2600 X 2600 X300MM as in footing
5. RCC (1 :1.5: 3) 1000 X 1000 X 1400 MM (1100MM below GL and 300 mm above GL)
6. 08 Nos 16mm dia TMT Bars 4 at comers 4 at centres of pedestal col as main bar with 600mm long cranking at bottom over matt bars
7. 16 Nos 12mm dia TMT main bars (4 Nos each at 4 side with 600mm long cranking at bottom over matt bars.
8. 10mm dia TMT bars @ 150mm C/C as Stirrups
9. 300mm dia 850mm long foundation bolts 08 Nos inserted in to 16 mm thick anchoring plate 590mm dia at bottom with pointed galvanised nut one each at bottom and top of plate.
10. Foundaiton bolt min clearance 150mm above pedestal col to rest high mast base plate 25mm thick over the bolts. Galvanised nuts 01 number at bottom of base plate 2 Nos at top of base plate.
Note : The unit rate is inclusive of necessary formwork, RFR removal of surplus earth, external finishes and other unforeseen items all as directed by Engineer-in- Charge. | - | - | - | - |
| 1.03 | LUMINAIRES CARRIAGE
Material of construction : 50NB ERW Class B-M.S Pipe
Diameter of carriage ring (mm) : 535 mm (ID)
Construction : 06 Arm, Welded, 2 Sections
Load carrying capacity : 9 Luminaire
TRAILING CABLE
Conductor : Copper, 5 core, 2.5 Sqmm
Insulation : EPR insulated PCP sheathed
No.of circuits per mast : One
WINCH / POWDER TOOL
Type /SWL of winch : Double drum, SWL 750 Kg - SGDD
Method of Operation : Integral Motor
Motor Capacity : 1.0 HP (Including suitable starter)
No of Speeds : 6 Pole, single speed
Torque Limitor : With Mechanical tripping Facility
STAINLESS STEEL WIRE ROPE
Grade / construction : AISI 316, 7/19 Construction
Number of Ropes : Two Continuous
Diameter (mm) : 6 mm
Breaking load Capacity : 2350 Kg x 2 | - | - | - | - |
| 2 | Supply, install,testing and commissioning 250 watt LED flood light ,min 110 lum/w,toughened glass,IP 66 with 10KA SPD, the help of suitable accessories including electrical wiring of luminaries with all wiring materials complete all as specified and directed | 36 | Each | - | - |
| 3 | Supply and laying UG cable XLPE insulated screened PVC bedded,galvanized steel strip or wire armoured electric power cables (heavy duty) 1100V with screened aluminium conductor of size 4 core 25 sqmm, complete all as specified and directed . | 625 | RM | 22 | ₹13,750 |
| 4 | Excavation in trenches not exc. 1.5 m wide and not exc 1.5 mtr deep in soft loose soil for laying / taking up/ taking down of cables and getting out and levelling of bottom surface to required level, complete all as specified and directed by Engineer- in- Charge. | 143.44 | CUM | 22 | ₹3,155.68 |
| 5 | Returning filling in Including spreading, levelling. Watering and well ramming soil in layers not exceeding 25 cm thick, complete all as specified and directed. | 84.17 | CUM | - | - |
| 6 | Removing excavated material (ie soil) from site to a distance n. exc 50 mtrs away and depositing where directed at a level n. exc. 1.5 mtr above the starting point all as specified and directed by Engineer-in-Charge. | 59.27 | CUM | 10 | ₹592.7 |
| 7 | Material and labour for tibba sand for filling in trenches below and around underground cables for cushioning of cables etc, complete all as specified. | 42.93 | CUM | 22 | ₹944.46 |
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.38 MB
TENDER_T04.pdf
Tender Documents • 1.57 MB
BOQ_860109.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .