CA NO. GE AF NO.1/GUR-55/2025-26 REPAIR TO WOODEN STEEL FURNITURE INCLUDING POLISHING AND PAINTING AT 13 BRD/16 BRD/31 MCU AND 27 ED REPAIR TO STEEL FURNITURE INCLUDING PAINTING TO STEEL FURNITURE AT 27 ED AF STN PALAM UNDER GE (AF) GURGAON NO-1.

Amount

Schedule-A (Wooden Furniture Work)

Removal of following existing unserviceable cane/old broken wooden components of various furniture items or similar items carefully without disturbing the adjoining parts and Supply and fixing new components of teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, placing every part in-tact and polishing/painting the disturbed portion of Chair Dining as applicable as per drg No.FD-279/262/228/FD/MAP-II/05. Work will be executed where the furniture exist in different User Units of GE (P) Air Force Gurgaon including BSO's Furniture Yard at 13 BRD Palam as directed by Engineer-in-Charge. Supply and fix front leg made out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes , shape and size as per Drg after removing the old/broken one without damaging the other parts complete all as specified and directed.

All as per item No 1.01 above but rear Leg

All as per item No 1.01 above but back rest

All as per item No 1.01 above but leg stiffener .

All as per item No 1.01 above but front Rail

All as per item No 1.01 above but rear Rail

All as per item No 1.01 above but side Rail

Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.

Material and labour for canning for seat and back: Canning shall be done with plastic cane 2mm wide half round for seat and 3mm wide for border in white colour 0.4mm thick weighing not less than 6 gms per 10 running meter in true "godrej pattern" all as shown on drawings. Holes for caning shall be 12.5 mm centre to centre and complete all as specified and directed. (Make : Premier/Shah or as approved).

All same as per item No. 1.01 above but wooden cleat.

Removing the existing unserviceable cane plastic from the chair and supply and fixing PVC seat 4mm thick in lieu of cane after providing corner support and one additional stiffener at centre for support of PVC seat. The PVC seat shall be fixed with proper screws and good workmanship .Due care shall be taken while fixing the PVC seat, the gaps if appears be filed with putty mixed with adhesive so as to make surface smooth and tidy. The PVC seat shall get approved from BSO and GE before supply. MAKE OF PVC SEAT –AMKO/COMFO or equivalent as approved by GE.

All asper Item No 1.00 here -in- before but CHAIR WRITING,FD-261/280/250 :-

Supply and fix front leg made out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes , shape and size as per Drg after removing the old/broken one without damaging the other parts complete all as specified and directed.

All as per item No 2.01 above but rear leg .

All as per item No 2.01 above but Back rest

All as per item No 2.01 above but Leg Stiffener

All as per item No 2.01 above but wooden cleat

All as per item No 2.01 above but side Rail

All as per item No 2.01 above but back rail

All as per item No 2.01 above but Arm rest

Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.

Material and labour for canning for seat and back: Canning shall be done with plastic cane 2mm wide half round for seat and 3mm wide for border in white colour 0.4mm thick weighing not less than 6 gms per 10 running meter in true "godrej pattern" all as shown on drawings. Holes for caning shall be 12.5 mm centre to centre and complete all as specified and directed. (Make : Premier/Shah or as approved).

All asper Item No 1.00 here -in- before but TABLE DINING FOR 6 PERSONS:-FD/MAP-II/03:-

Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).

Supply and fix of leg : Leg shall be made of well seasoned teak wood free from cracks and knots , sap wood and other blemishes after removing the old damaged/broken one per drg without damaging the other parts.

Long rail : All same as per item No 3.02 above but long rail for table dining 6 per.

Short rail : All same as per item No 3.02 above but short rail for table dining 6 per.

L-shape corner of flat iron 4" x 4" to the Table between legs and rail to be fixed with screw.

Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.

Hard rubber shoes standard quality as per drg.

All same as per item No 3.02 above but wooden cleat

All asper Item No 1.00 here -in- before but TABLE DINING FOR 8 PERSONS:-FD-273 / 239:-

Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).

Supply and fix of leg : Leg shall be made of well seasoned teak wood free from cracks and knots , sap wood and other blemishes after removing the old damaged/broken one per drg without damaging the other parts.

Long rail : All same as per item No 4.02 above but long rail for table dining 8 per.

Shor rail : All same as per item No 4.02 above but short rail for table dining 8 per.

L-shape corner of flat iron 4" x 4" to the Table between legs and rail to be fixed with screw.

Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.

Hard rubber shoes standard quality as per drg.

All as per Item No 1.00 here -in- before but TABLE WRITING:-FD-249 & 275:-

Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).

Supply and fixing of sides and bottom of cup board : It shall be made out of one side melamine faced pre-laminated MDF board 18mm thick confirming to IS in baverian beach shade as per drg .

Supply and fixing of shutters complete with knob and lock : shutter shall be made out of both side melamine faced pre-laminated MDF board 18mm thick confirming to IS in baverian beach shade as per drg duly fixed with paino type hinges and suitable S/S knob 40mm dia as approved with lock and suitable catcher.

Supply and fix leg in repair made out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes , shape and size as per Drg after removing the old/broken one without damaging the other parts complete all as specified and directed.

All as per item No 5.04 above but long rail .

All as per item No 5.04 above but Long stiffener.

All as per item No 5.04 above but Short rail

All as per item No 5.04 above but bottom rail of table writing.

Supply and fixing of back of cup board : It shall be made out of 6mm thick plywood BWR grade confirming to IS as approved to be fixed as shown on drg .

Supply and fixing of partition of the cup board : It shall be made out of one side melamine faced pre-laminated MDF board 18mm thick confirming to IS in baverian beach shade as per drg and as approved and all as directed by Engr-in-charge.

Drawer made of 16 mm thick plywood BWP grade with bothside sumica 0.8/1 mm thick with 1.6 mm thick PVC edging through edge bander machine of shade as approved by EIC/GE with 2 mm thick PVC edging in front & sides and bottom of drawer shall be 9 mm thick BWP Plywood with white sunmica 0.8 mm thick (Make-Century ply/Greenply/Archidply) complete with telescopic channel (make -Ebco/Ozone/Hettich) complete . Rest all as per drg.

Teak wood corner shall be provided to each legs as per sample rest all as directed by EIC/GE.

Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.

All asper Item No 1.00 here -in- before but TABLE DRESSING GENTS FD- 230:-

Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).

All same as per item No 5.04 above but side of table dressing gents.

All same as per item No 5.04 above but bottom of table dressing gents .

Mirror : S & F mirror along with frame as per drg made of well seasoned teak wood free from cracks and knots duly french polished. Mirror shall be of electro copper plated polished sheet glass 6 mm thick Make- Saint Gobain/Modiguard. Suitable rawl plug heavy duty as per drg 2 Nos shall be provided to the back of the mirror for hanging. Back of the frame shall be of plywood commercial 6mm thick BWR grade confirming to IS as approved and as shown on drg.

Back : Back shall be made of one side melamine faced pre-laminated MDF board 6mm thick confirming to IS in Baverian beach shade Make-Greenlam/WINTUFF/TESA in one piece after removing the old one. suitable rawl plug as per drg 2 Nos shall provided to the back for hanging .

Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.

All asper Item No 1.00 here -in- before but TABLE DRESSING LADIES FD/MAP-II/07:-

Back : All same as per item No 5.04 above but back of table dressing ladies.

Side : All same as per item No 5.04 above but suitable for Table dressing ladies with mirror as per the drg.

Bottom : All same as per item No 5.04 above but back of table dressing ladies.

Drawer with Handle and telescopic channel : All same as per item No 16.04 above but suitable for Table dressing ladies with mirror as per the drg.

Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).

Supply and fix of mirror : All same as per item No 5.04 above but suitable for Table dressing ladies with mirror as per the drg.

Taking out old pressed /torn old cushions from stool and Supply 75mm foam cushion and 40 densitythick foam cushion (Make- Sleepwell/Dureo Flexs/Godrej) of suitable for stool dressing duly covered with good quality swed tapestry all over(Not less than Rs 200 per metre)cloth of approved color and shade by GE, Each cushion cover shall be provided with best quality zip stitched on one edge of cushion with standard fitting.(Sleepwell and Kurloan)

Taking out old torn/ faded cushion cover from foam cushions and supply and fixing new cushion cover to the existing cushion. The cover of the cushion shall be of best quality swed tapestry cloth ( Not less than Rs.200 per meter) as approved by GE complete , Each cushion cover shall be provided with best quality zip stitched on one edge of cushion with standard fitting.

Long Stiffener : It shall be made of well seasoned teak wood free from cracks and knots cut to size as per drg duly finished/ french polished over a coat of primer and to be fixed with suitable no of screw wood steel .

Short Stiffener : All same as per item no. 5.04 above but short stiffener of table dressing ladies.

Leg : All same as per item no. 5.04 above but leg of table dressing ladies.

CP steel 100mm long handle to the drawers & shutter of table dressing ladies placed in position as shown in drg.

50mm dia swivel type castors wheel for stool dressing.

Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.

All asper Item No 1.00 here -in- before but SOFA SET 5 SEATER,(2 Single seater and One 3seater,10Nos cushion in each set) FD/MAP-II/02 and All TP Sofa 5 seater set (2 seater, 3 seater & single seater)

wooden batten

Teak wood bearer

Taking out old pressed /torn old cushions and Supply 40 density thick foam cushion of size 21”x22”x4” (Make- Sleepwell/Deuroflexs/Godrej ISI Mark) duly covered with good quality suede tapestry all over(Not less than Rs 380 per metre) cloth of approved color and shade by GE (Sample of cloth is kept with Enginner-In-Charge), Each cushion cover shall be provided with best quality matching zip stitched on one edge of cushion with standard fitting with pipeing all around and as directed by ENGR-in-C.

Taking out old torn/ faded cushion cover from foam cushions and supply and fixing new cushion cover to the existing cushion. The cover of the cushion shall be of best quality suede tapestry cloth ( Not less than Rs.450 per meter) as approved by GE complete , Each cushion cover shall be provided with best quality matching zip stitched on one edge of cushion with standard fitting with pipeing all around and as directed by ENGR-in-C.

Scratching the entire wooden pallets of sofa 3 seater , filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish, after properly cleaned and smoothened the surface.

Scratching the entire wooden pallets of sofa single seater, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish, after properly cleaned and smoothened the surface.

All asper Item No 1.00 here -in- before but HAT STAND WITH MIRROR,FD-233:-

Supply and fix of beading : Beading made out of well seasoned teak wood size 35x6mm all around shall be provided to the frame of hat stand as shown on drg .

Supply and fix of plywood : Plywood 4mm thick commercial Make- Green ply confirming to IS duly approved shall be provided wherever required to be fixed with head less nails at the back side of hat stand all as shown on drg and as directed by Engr-in-charge .

Supply and fix of plywood : Plywood one side teak face 4mm thick commercial confirming to IS duly approved shall be provided wherever required to be fixed with head less nails at the front side of hat stand all as shown on drg .

Supply and fixing of peg : Aluminium peg 100mm long as per sample shall be fixed with screw wood steel 25mm long as shown on drg .

Supply and fix of looking Mirror : Looking Mirror size 440x300x6mm of approved quality make-Modi guard/Saint Gobain/Swastic duly fixed with beading size 35x6mm made out of well seasoned teak wood duly finished as shown on drg .

Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.

All asper Item No 1 here -in- before but Table 3'X2' with / without Drawer: FD-/284/283/291/288 or simillar

Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).

Legs as per drg

Top long rail as per drg

Top Short rail as per drg

Center Stiffener as directed by EIC

Short stiffener as per drg

MS right angle /corner shall be provided to each legs as per sample rest all as directed by EIC/GE.

Shoes as sample

Scratching the entire wooden pallets of table, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish, after properly cleaned and smoothened the surface.

All as per Item No 1.00 here -in- before but TV TROLLEY , FD/E6/MAP/04 (R):-

Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).

Sides

Baes/Shelves

5.5mm thick plain glass with magnetic catchers.

50mm dia swivel type castors wheel.

Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.

All asper Item No 1.00 here -in- before but TEAPOY WOODEN,FD- 382:-

Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).

Supply and fix of leg : Leg shall be made of well seasoned teak wood free from cracks and knots , sap wood and other blemishes after removing the old damaged/broken one as per drg without damaging the other parts.

All same as per item No 12.02 above but long rail for teapoy.

All same as per item No 12.02 above but short rail for teapoy.

: All same as per item No 12.02 above but stiffener for teapoy.

Teak wood corner shall be provided to each legs as per sample rest all as directed by EIC/GE.

Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.

All asper Item No 1.00 here -in- before but TABLE CENTRE ,FD-274:-

Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).

Supply and fix of leg : Leg shall be made of well seasoned teak wood free from cracks and knots , sap wood and other blemishes after removing the old damaged/broken one per drg without damaging the other parts.

Long rail : All same as per item No 2.02 above but long rail for table centre.

Shor rail : All same as per item No 2.02 above but short rail for table centre.

Stiffener : All same as per item No 2.02 above but short rail for table centre.

Teak wood corner shall be provided to each legs as per sample rest all as directed by EIC/GE.

Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.

All asper Item No 1.00 here -in- before but SIDE BOARD :FD-1112:-

Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).

All as specified above item No 8.01 above but for bottom of side board

All same as per item No 8.01 done but sides for side board.

Supply and fix of back : It shall be made of one side melamine faced pre-laminated MDF board 6mm thick confirming to IS in Baverian beach shade in one piece.

Supply and fixing of shutters complete with knob and lock : shutter shall be made out of both side melamine faced pre-laminated MDF board 18mm thick confirming to IS in baverian beach shade as per drg duly fixed with paino type hinges and suitable S/S knob 40mm dia as approved with lock and suitable catcher.

Drawer with handle : Drawer shall be made out of one side melamine faced pre-laminated MDF board 18mm thick confirming to IS in baverian beach shade as per drg and provided with recessed handle of best quality as approved. Bottom of drawer shall be made of one side melamine faced pre-laminated MDF board 6mm thick .

Leg shall be made of well seasoned teak wood free from cracks and knots cut to size as per drg duly finished/ french polished over a coat of primer and to be fixed with suitable groving with long/short frame .

All same as per item No 8.07 above but long stiffener .

All same as per item No 8.07 above but Short stiffener .

CP steel 100mm long handle to the drawers & shutter of Bin Linen multi purpose placed in position as shown in drg.

Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.

All asper Item No 1.00 here -in- before but TABLE PEG ,FD-384:-

Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).

Supply and fix of leg : Leg shall be made of well seasoned teak wood free from cracks and knots , sap wood and other blemishes after removing the old damaged/broken one as per drg without damaging the other parts.

All same as per item No 9.02 above but long rail for Peg table.

All same as per item No 9.02 above but short rail for Peg table.

All same as per item No 9.02 above but stiffener for Peg Table.

Teak wood corner shall be provided to each legs as per sample rest all as directed by EIC/GE.

Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.

All as per item No 1.00 here-in -before but Servicing Table 10'x4'x2'.6', (TP)

Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).

Long rail

Short rail

L-shape corner of flat iron 38x3mm 4" x 4" to the Table between legs and rail to be fixed with screw.

Scratching the entire wooden pallets of table, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish, after properly cleaned and smoothened the surface.

All asper Item No 1.00 here -in- before but CHAIR EASY,FD-229/358:-

Supply and fix front leg made out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes , shape and size as per Drg after removing the old/broken one without damaging the other parts complete all as specified and directed.

All as per item No 19.01 above but rear leg .

All as per item No 19.01 above but Rail seat

All as per item No 19.01 above but Stiffener

All as per item No 19.01 above but Back rest

All as per item No 19.01 above but Arm rest

All as per item No 19.01 above but fillets for caning seat and back .

All same as per item No. 19.01 above but wooden cleat.

Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.

Material and labour for canning for seat and back: Canning shall be done with plastic cane 2mm wide half round for seat and 3mm wide for border in white colour 0.4mm thick weighing not less than 6 gms per 10 running meter in true "godrej pattern" all as shown on drawings. Holes for caning shall be 12.5 mm centre to centre and complete all as specified and directed. (Make : Premier/Shah or as approved).

All asper Item No 1.00 here -in- before but CHAIR DINING LONG BACK/ OFFICERS ,FD/E6/MAP/10 or similar

Supply and fix front leg made out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes , shape and size as per Drg after removing the old/broken one without damaging the other parts complete all as specified and directed.

All as per item No 18.01 above but rear Leg

All as per item No 18.01 above but back rest

All as per item No 18.01 above but leg stiffener ./ vertical stiffner

All as per item No 18.01 above but front Rail

All as per item No 18.01 above but rear Rail

All as per item No 18.01 above but side Rail

Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.

seat made of 10mm thick BWR plywood over which 40 density cushion (Make- Sleepwell/Dureo Flexs/Godrej) foam 75mm thick shall be provided duly covered with best quality swed tepestry cloth (Not less than Rs 200 per metre )as approved bt BSO.

All same as per item No. 18.01 above but wooden cleat.

Removing of old unsv tapestry cloth and supply and fixs new cloth (rate should not be less than INR 120/- per RM) as apporoved and directed by in Engr charge.

All asper Item No 1.00 here -in- before but Wooden BED PLY TOP:FD-246 & TP:-

Supply and fix of Long rail : long rail shall be made of well seasoned teak wood free from cracks and knots , sap wood and other blemishes after removing the old damaged/broken one per drg without damaging the other parts.

Supply and fix leg made out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes , shape and size as per Drg after removing the old/broken one without damaging the other parts complete all as specified and directed.

Head Rest : All same as per item No 19.01 above

Foot rest : All same as per item No 19.01 above

12 mm commercial BWR Grade ISI ply placed in position as shown in drg.(Century ply"'Sainik 710/Greenply" Green gold"/Archidply" Platinum"/Duroply"titanium"))

Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.

All as per item No 1.00 here-in -before but Table office officer (TP)

Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board exterior grade in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).

Long rail

Short rail

L-shape corner of flat iron 38x3mm 4" x 4" to the Table between legs and rail to be fixed with screw.

Scratching the entire wooden pallets of table, filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish, after properly cleaned and smoothened the surface.

All asper Item No 1.00 here -in- before but TABLE OFFICE CLERK WOODEN FD-321, DB-4120:-

Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).

Supply and fix leg made out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes , shape and size as per Drg after removing the old/broken one without damaging the other parts complete all as specified and directed.

All same as per ser item No. 21.02 above but rail.

Repair to shutter of table by providing hinges .

Drawer made of 16 mm thick plywood BWP grade with bothside sumica 0.8/1 mm thick with 1.6 mm thick PVC edging through edge bander machine of shade as approved by EIC/GE with 2 mm thick PVC edging in front & sides and bottom of drawer shall be 9 mm thick BWP Plywood with white sunmica 0.8 mm thick (Make-Century ply/Greenply/Archidply) complete with telescopic channel (make -Ebco/Ozone/Hettich) complete . Rest all as per drg.

Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.

Removal of following existing unserviceable steel/UNSV components of various furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing, welding, gluing, providing hinges, denting, applying putty for leveled surface, placing every part in-tact and painting the disturbed portion of Almirah Steel Med Complete all as specified and as applicable as drawings,FD-1032. NOTE : Work will be executed where the furniture exist in different User Units of GE Air Force Gurgaon No 1 including 27 ED & 13 BRD BSO's Furniture Yard as directed by Engineer-in-Charge:-

Removing of unserviceable and worn out legs and providing new legs made out of 1mm thick MS sheet fabricated to shape as per existing almirah steel with shelves/Half S & Half H Large complete all as specified and directed.

Removing of unserviceable shelves and providing new shelves made out of MS sheet 1.00mm thick with fixing brackets of existing type almirah Med steel complete all as specified and directed.

Material and labour for removing unserviceable shutter and providing new shutter using MS sheet 1.00mm thick as per existing shape Almirah Med steel. (Drg No FD-1032) complete all as specified and directed.

Taking down existing unserviceable MS clips with screw/nuts and bolts of almirah steel with shelves/Half S & Half H medium (Drg No FD-1032) refixing/weldling with new items, MS clips with screws/nuts & bolts complete all as specified and directed.

All as per item No 22.03 above but locks (6 levers ) of make link or Harrison approved by GE.

All as per item No 22.03 above but CP handle with bolt.

All as per item No 22.03 above but mild steel locking rod.

All as per item No 22.03 above but locking box / device

Scratching of scracheds/dentings to powder coated steel surface with emery paper, applying metel putty wherever required and repair inside/out side with Spray painting (Hammer tone/Normal) duly matched with existing surfaces or as directed by Engr-in-charge.

Scratching of scracheds/dentings to powder coated steel surface with emery paper, applying metel putty wherever required and repair inside only with Spray painting (Hammer tone) duly matched with existing surfaces or as directed by Engr-in-charge.

Scratching of scracheds/dentings to powde coated steel surface with emery paper, applying metel putty wherever required and repair out side only with painting Spray duly (Hammer tone) matched with existing surfaces or as directed by Engr-in-charge.

All as per item No 22.00 here-in -before but ALMIRAH LARGE STEEL FD-67(M)/350 /1031:-

Removing of unserviceable and worn out legs and providing new legs made out of 20 gauge MS sheet fabricated to shape as per existing almirah steel with shelves/Half S & Half H Large complete all as specified and directed.

Removing of unserviceable shelves and providing new shelves made out of MS sheet 1.00mm thick with fixing brackets of existing type almirah large steel complete all as specified and directed.

Material and labour for removing unserviceable shutter and providing new shutter using MS sheet 1.00mm thick as per existing shape Almirah large steel. (Drg No FD-1031) complete all as specified and directed.

Taking down existing unserviceable MS clips with screw/nuts and bolts of almirah steel with shelves/Half S & Half H Large (Drg No FD-1031) refixing/weldling with new items, MS clips with screws/nuts & bolts complete all as specified and directed.

All as per item No 23.02 above but locks (6 levers ) of make link or Harrison as approved by GE.

All as per item No 23.02 above but CP handle with bolt.

All as per item No 23.02 above but mild steel locking rod.

All as per item No 23.02 above but locking box / device

Scratching of scracheds/dentings to powder coated steel surface with emery paper, applying metel putty wherever required and repair inside/out side withSpray painting (Hammer tone) duly matched with existing surfaces or as directed by Engr-in-charge.

Scratching of scracheds/dentings to powder coated steel surface with emery paper, applying metel putty wherever required and repair inside only with Spray painting (Hammer tone) duly matched with existing surfaces or as directed by Engr-in-charge.

Scratching of scracheds/dentings to powde coated steel surface with emery paper, applying metel putty wherever required and repair out side only with painting Spray (Hammer tone) duly matched with existing surfaces or as directed by Engr-in-charge.

All as per item No 22.00 here-in -before but TABLE COMPUTER, FD/E6/MAP/03,TP

Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm exterior MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).

Key board tray of table with telescopic chanel

Remove UNSV Telescopic chanel and fixing of New telescopic chanel

Drawer of table with telescopic chanel

Shelves of table

vertical side shelf

Painting with one coat of black synthetic enamel paint to complete table etc. all as specified and directed.

All as per item No 22. here-in -before but BOOK CASE STEEL- FD-1028/356/TP

Applying one coat of synthetic enamel paint olive green/Grey including preparation of old painted surfaces after necessary denting to Book case steel shown on drg (FD-1028) complete.

Lock 4/5 levers godrej pattern, including two keys and including removing of unserviceable lock from Book case steel shown on drg (FD-1028) complete.

Handle steel chromium plated size- 100mm long including removing of unserviceable handle steel from Book case steel shown on drg (FD-1028) complete.

Glass pane 3mm thick including removing of unserviceable/broken glass pane from Book case steel shown on drg (FD-1028) complete.

All as per item No 22 here-in -before but RACK STEEL Adjustable open type ,FD-1038/TP

Back to rack six tiers steel made of 1mm thick MS sheet of size 1905mmx915mm fixed in between vertical angle iron with nut and bolts as shown in drg.

Sides to rack six tiers steel made of 1mm thick MS sheet of size 1905mmx610mm fixed in between vertical angle iron with nut and bolts as shown in drg.

Shelves to rack six tiers steel made of 1mm thick MS sheet of size 915mmx610mm made to shape and fixed in between opposite vertical angle iron with nut and bolts as shown in drg.

One coat of synthetic smoke grey paint on all steel portion of rack complete.

All as per item No 22. here-in -before but CHAIR COMPUTER/Revolving FD/E6/MAP/01/TP

Removing unserviceable damaged Seat & back of Chair computer, supply and upholstered with crape fabric and moulded polyurethane foam with PVC lipping all round. The polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 Kg per cubic Mtr on Hampden machine ,all as directed and specified by Engr -in -charge

Removing old unserviceable arm rest of chair computer and S&F new one made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in –charge.

Removing unserviceable castor twin wheels and S&F new castor twin wheel suitable for chair computer all as directed

Removing unserviceable hydrolic lift suitable for chairr all as specified and directed by Engr -in charge.

Removing of old unsv tapestry cloth and supply and fixs new crape cloth (rate should not be less than INR 120/- per RM) as apporoved and directed by in Engr charge.

All as per item No 22. here-in -before but CHAIR VISITOR ,TP MAKE GEEKAEN / E S C / GODREJ / ETC

Removing unserviceable damaged Seat & back of Chair visitor. Supply and fixing the seat made of 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round. The polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 Kg per cubic mtr on Hampden machine.

Painting the entire frame with one coat of synthetic enamel paint 1st quality including preparation of surface of chair writing officers including handle all as directed by Engr -in -charge.

Removing old unserviceable arm rest of chair writing officer and S&F new arm made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in -charge.

Removing of old unsv tapestry cloth and supply and fixs new cloth (rate should not be less than INR 120/- per RM) as apporoved and directed by in Engr charge.

Removing old broken rubber stopper of the chairs and S&F new Rubber stopper at bottom all as directed and specified by Engr -in -charge

All as per item No 22.00 here-in -before but CHARPOY IP WITH HARD TOP ,FD/MAP-II/01

12 mm commercial BWR Grade ISI ply placed in position as shown in drg.(Century ply"'Sainik 710/Greenply" Green gold"/Archidply" Platinum"/Duroply"titanium"))

Rubber shoes of high quality placed in position as shown in drg.

Scratching of scraches/ dentings to powder coated steel surfaces with emery paper ,applying metal putty wherever required and repair with painting duly matched with existing surfaces.

All as per item No 22 here-in -before but CHAIR REVOLVING HIGH BACK)TP MAKE GEEKAEN / E S C / GODREJ / ETC

Removing of old fabric and pressed molded polyurethane foam cushion from seat and back of chair revolving executive after carefully removing the PVC lipping from the edges of the seat and back of the chair, Supply and fixing new moulded polyurethane foam cushion 50mm thick and fabric over the seat and back of the chair as per the existing shape of the chair duly providing new PVC lipping all-round the edges of seat and back of the chair complete all as specified and all as directed by Engr-in- Charge.

Removing the old unserviceable arm of the chair revolving executive by unscrewing the bolt from the inner side, Supply and fixing new arm to the chair revolving executive of the same shape and size as of existing one. The arm shall be of black integral skin polyurethane reinforced with MS insert, it shall be scratch and weather resistant.

Removing the old unserviceable complete pedestal assembly along with hydraulic system of chair revolving executive by removing the pin from bottom carefully without damaging the upper portion. Supply and fixing new pedestal assembly along with hydraulic system of chair revolving executive with standard workmanship .The pedestal assembly shall consists of two wheel coasters for smooth running of chairs and shall have gas lift mechanism complete all as specified and all as directed by Engr-in- Charge.

Removing of old unsv tapestry cloth and supply and fixs new cloth (rate should not be less than INR 120/- per RM) as apporoved and directed by in Engr charge.

Removing unserviceable castor twin wheels and S&F new castor twin wheel suitable for chair computer all as directed.

All asper Item No 22 here -in- before but SOFA single seater/ two seater /three seater chrome plated arms and legs (TP) MAKE GEEKAEN / E S C / GODREJ / ETC

Continuous Gas welding as required & Nut bolt .

Taking out old pressed /torn old cushions fron sofa single seater of size 800 mm (L)x800 mm(D) x 815 mm (H)and Supply 40 density thick foam cushion duly covered with good quality leatherite tapestry all over(Not less than Rs 300 per metre)cloth of approved color and shade by GE.

Taking out old pressed /torn old cushions fron sofa two seater of size 1870 mm (L)x 800 (D) x 815 mm (H)and Supply 40 density thick foam cushion duly covered with good quality leatherite tapestry all over(Not less than Rs 300 per metre)cloth of approved color and shade by GE.

Taking out old pressed /torn old cushions fron sofa three seater of size 2110(L)x 965(D) x 825(H) and Supply 40 density thick foam cushion duly covered with good quality leatherite tapestry all over(Not less than Rs 300 per metre)cloth of approved color and shade by GE.

Taking out old torn/ faded cushion leatherite cover from foam cushions of sofa single seater of size 800 mm (L)x800 mm(D) x 815 mm (H) and supply and fixing new leatherite cushion cover to the existing cushion. The cover of the cushion shall be of best quality leatherite upholstery ( Not less than Rs.300 per meter) as approved by GE complete . All as specified and directed by Engr-In-charge

Taking out old torn/ faded cushion leatherite cover from foam cushions of sofa two seater 1870 mm (L)x 800 (D) x 815 mm (H)and supply and fixing new leatherite cushion cover to the existing cushion. The cover of the cushion shall be of best quality leatherite upholstery ( Not less than Rs.300 per meter) as approved by GE complete . All as specified and directed by Engr-In-charge.

Taking out old torn/ faded cushion leatherite cover from foam cushions of sofa three seater 2110(L)x 965(D) x 825(H)and supply and fixing new leatherite cushion cover to the existing cushion. The cover of the cushion shall be of best quality leatherite upholstery ( Not less than Rs.300 per meter) as approved by GE complete . All as specified and directed by Engr-In-charge

All as per item No 22.00 here-in -before but CHARPOY GI PIPE,FD-220:-

Taking out existing unserviceable plywood from charpoy, dismantling the unserviceable parts like GI elbow, GI check nuts, GI pipe and tightening the same with new parts (supplied in succeding items in schedule), supply and fixing of plywood 12mm thick 5 ply of size 1.98x0.93mtr BWR Grade ISI confirming to relevant IS with 3 Nos stiffnerand 50mmX5mmX930mm fixing with nut and bolt 6mm dia complete along with painting all as specified and directed by Engineer-in-Charge. (Make : Century ply"'Sainik 710/Greenply" Green gold"/Archidply" Platinum"/Duroply"titanium ).

Supply only GI 3 way elbow ISI marked of size 32mm bore weight not less than 400 gms each complete all as specified and directed by Engineer-in-Charge. (Make : ARE).

Supply only GI check nut 6mm thick weight not less than 35 gms each complete all as specifed and directed by Engineer-in-Charge.

Supply only long rail of charpoys GI pipe long rail made out of 32mm bore GI pipe medium grade confirming to IS : 1239 Part-I of length 1.9 mtrs duly threaded one side upto 25mm long at end and other side to 50 mm long at end complete all as specified and directed by Engineer-in-charge. (Make: Jindal).

Converting long rail into short Rail (Obtain from Ser No 20.04 above) making threads 25mm long both side end complete all as specified and directed by Engineer-in-Charge.

Converting short rail into leg (Obtain from Ser No 20.05 above) making threads 25mm long both side end complete all as specified and directed by Engineer-in-Charge.

Supply only MS Flat 920x40x5 mm duly painted black colour after primer coat complete all as specified and directed. (Make: Jindal).

All as per item No 22 .00 here-in -before but LOCKER BED SIDE STEEL ,FD-127(M)/257/1029

Continuous Gas welding as required .

Taking down existing unserviceable hasp and staple from locker steel. Supply and fix in replacement hasp and staple aluminium ISI marked size 75x40x3mm to shutter as shown on drg.

Supply and fixing CP socket in replacement suitable bracket and stappled socket open at one end as approved complete all as specified and directed.

All as per item No 22.02 above but aluminium handle 100mm long ISI marked as approved.

All as per item No 22.02 above but supply and fix in replacement MS butt hinges as per existing size.

All as per item No 22.02 above but hangigh rod conduit pipe stainless steel 20mm bore 1.6 mm thick as approved by Engr-in-charge. Length of conduit shall be as per drg.

Material and labour for removing unserviceable shutter and providing new shutter using MS sheet 1.00mm thick as per existing shape of locker steel complete all as specified and directed.

Removing of unserviceable and worn out legs and providing new legs made out of 1.00mm thick MS sheet fabricated to shape as per existing locker steel complete all as specified and directed.

Removing of unserviceable shelves and providing new shelves made out of MS sheet 1.00mm thick with fixing brackets of existing type locker steel complete all as specified and directed.

Scratching of scracheds/dentings to powde coated steel surface with emery paper, applying metel putty wherever required and repair inside/out side with painting duty matched with existing surfaces

Scratching of scracheds/dentings to powde coated steel surface with emery paper, applying metel putty wherever required and repair inside side only with painting duty matched with existing surfaces

Scratching of scracheds/dentings to powde coated steel surface with emery paper, applying metel putty wherever required and repair out side only with painting duty matched with existing surfaces

All as per item No 22.00 here-in -before but TABLE OFFICE CLERK STEEL: FD-84, 381, 1003 & 1004.

Legs of MS Square tube of size 25mmx25mmx760mm of 20 Gauge as per drg.

Removing of unserviceable lock and supplying and fixing new lock 32 to 55 mm size with duplicate keys and necessary screws etc (Lock should be ISI Marked).

Supply and fixing new drawer made out of 1mm thick MS Sheet alongwith PVC recessed handle as approved including taking down old drawer.

Stiffeners as per drg.

Supply and fix suitable PVC shoes of superior quality for legs for table office cleark steel.

Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm exterior MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).

Replacement of worn out conduct MS 25 mm Sq pipe 16 gauge whrerever required as directed and fixing as shown on drg . (welding points shall be measured and paid separately.

Mig welding of broken joints MS members (Square / tabular) for legs for table .

Carrying out minor repairs like denting & gas welding of broken drawers etc and spray painting with one coats of the green colour synthetic enamel paint to complete (External & enternal ) table etc all completed.

All as per item No 22.00 here-in -before but TABLE OFFICE OFFICER STEEL: FD-84/ 1002/1003.

Legs of MS Square tube of size 25mmx25mmx760mm of 20 Gauge as per drg

Material and labour for removing of unserviceable lock and supplying and fixing new lock 32 to 55mm size with duplicate keys and necessary screws etc (lock should be ISI marked).

Supply and fixing new drawer made out of 1mm thick MS Sheet alongwith PVC recessed handle as approved including taking down old drawer.

Stiffeners as per drg

Supply and fix suitable PVC shoes of superior quality for legs for table office officer steel.

Supply and fix in replacement shutter made out of 1.00mm thick MS sheet made to shape as per drg.

Material and labour for removing of unserviceable lock and supplying and fixing new lock 32 to 55mm size with duplicate keys and necessary screws etc (lock should be ISI marked).

Material and labour for replacement of worn out conduit MS 25mm Sq pipe 16 gauge wherever required as directed and fixing as shown on drg.( Note - welding points shall be measured and paid separetly).

Material and labour for MIG welding of broken joints MS members (square / tubular ) for MS conduit 25 Sq mm square pipe.

Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm exterior MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel).

Material and labour for carrying out minor repairs like denting & gas welding of broken drawers etc and spray painting with one coats of the green colour synthetic enamel paint to complete (External & enternal ) table etc all completed.

All as per item No 22. here-in -before but Rack Storage steel 6'-3"x3'x2' & TP

Back to rack storage steel made of 1mm thick MS sheet of size 1905mmx915mm fixed in between vertical angle iron with nut and bolts as shown in drg.

Sides to rack storage steel made of 1mm thick MS sheet of size 1905mmx610mm fixed in between vertical angle iron with nut and bolts as shown in drg.

Shelves to rack storage steel made of 1mm thick MS sheet of size 915mmx610mm made to shape and fixed in between opposite vertical angle iron with nut and bolts as shown in drg.

One coat of synthetic smoke grey paint on all steel portion of rack complete.

All as per item No 22. here-in -before but RACK Universal SS 2150x1300x400mm Model- NKL

Back to rack Univeral SS steel made of 1mm thick MS sheet of size 1905mmx915mm fixed in between vertical angle iron with nut and bolts as shown in drg.

Sides to rack Univeral SS steel made of 1mm thick MS sheet of size 1905mmx610mm fixed in between vertical angle iron with nut and bolts as shown in drg.

Shelves to rack Univeral SS steel made of 1mm thick MS sheet of size 915mmx610mm made to shape and fixed in between opposite vertical angle iron with nut and bolts as shown in drg.

One coat of synthetic smoke grey paint on all steel portion of rack complete.

All as per item No 22.00 here-in -before but CHAIR STEEL TUBULAR WITH ARMS :FD-75(M)

Scratching the entire frame of chair and applying desired coat of synthetic enamel olive green/steel grey paint after preparation of surfaces. Complete all as specified and as directed by Engr-in-Charge.

02 nos of MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with nut bolts and washers and screws to fix two flats placed beneath the seat complete all as specified and all as directed by Engr-in- Charge.

Removing the old unserviceable back from the frame of the chair. Supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with nut bolts and washers.

Second class Hard wood Arm rest as per drg

Hard rubber shoes as per drg

Rubber cap for conduit pipe as per drg

Note :- The amount of Rs 10262 against Schedule of Credit on Srl Page 168 to 173 shall be deducted from the total amount quoted against Sch 'A'

M/s Suraj Furnitures (BID ID -3517549)

M/S Parshant Associates (BID ID -3512493)

KHAZAN SINGH SAWHNEY (BID ID -3512089)