Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹24.1 LAccepted-AOC 20 8 EWS PREETAM NAGAR COLONY ALLAHABAD | PRAYAGRAJ | UTTAR PRADESH | 211001 | 1 | Accepted-AOC Lowest bidder | |
| 2 | 2₹26.8 L+₹1.9 L (7.43%)Rejected-AOC 2788 FOURTH FLOOR GALI RAJPUTANA ARYA PURA SABZI MANDI NEW DELHI KAMLA NAGAR NORTH DELHI DELHI 110007 UDYAM DL 01 0057966 | NORTH DELHI | DELHI | 110007 | 2 | Rejected-AOC 2nd | |
| 3 | 3₹31.2 L+₹6.3 L (25.0%)Rejected-AOC H 13 GEETANJALI PARK WEST SAGARPUR NEW DELHI 110046 | NEW DELHI | DELHI | 110046 | 3 | Rejected-AOC 3rd |
Tender Value
₹33.9 L
EMD Value
₹67,800
Closing Date
23 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF TUGHLAKABAD
GE AF TUGHLAKABAD SANGAM VIHAR PO NEW DELHI 110080
SPL REPAIR TO STN ARMOURY (BLDG NO P-99) AT 12BRD, AF UNDER GE (AF) TUGHLAKABAD
2022_MES_570419_1
GE/TKD-68/2022-23
Open Tender
Civil Works - Others
Item Rate
180 days
GE AF TUGHLAKABAD
MES contractor enlisted having deposited Standing Security with dept. Contractors not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category
8 documents required · 8 mandatory
₹500
GE AF TUGHLAKABAD
₹67,800
Yes
27 Jun 2023
21 Dec 2022
25 Jan 2023
28 Dec 2022
23 Jan 2023
4 Jan 2023
Amount
Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engr-in-charge.
M&L for Rendering 15mm thick in cement mortar (1:6) on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed by Engr-in-charge.
M&L for Rendering 5mm thick in cement mortar in (1:3) on ceiling and finishing the surface even & smooth without using extra cement complete all as specified and directed by Engr-in-charge.
M&L for applying 2 coats of OBD on new surface of walls over 3mm thick wall care putty complete all as specified and directed by Engr-in-charge.
M&L for preparation of new undecorated surfaces and apply three coat of white wash on ceiling complete all as specified and directed by Engr-in-charge.
Dismantling of old brick tiles or terracing tiles, single layer on roofs complete all as specified and directed by Engr-in-charge.
Demolition of existing mud in roofs of any thickness including plastering and leaping, whether full thickness removed or only a part there of, and removing of mud as directed by Engr-in-charge.
Roughening the surfaces of old concrete roof surfaces by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed by Engr-in-charge.
Cutting out cracks to V-section in existing roofs or terracing cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand (1:1) (by weight) complete all as specified and directed by Engr-in-charge.
M&L for PCC (1:2:4), type B1 by using 20mm graded stone aggregate in padding/mass concrete and haunching complete all as specified and directed by Engr-in-charge.
M&L 10mm thick rendering in CM (1:4) using water proofing compound at the rate of 3% weight of cement over concrete surfaces complete all as specified and directed by Engr-in-charge.
Supply only water proofing compound complete all as specified and directed by Engr-in-charge.
M&L for APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3 mm thick reinforced with polyester non wove fabric (wt not less than 150 gms /Sqm) land on Providing & laying a coat of cold applied bitumen 85/25 based primer on entire surface @ 0.300 Ltr/Sqm on dry and clean surfaces complete all as specified and directed by Engr-in-charge.
M&L for washed stone grit plaster on exterior walls in two layers under layer 12 mm cement plaster (1:4) (1 cement : 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square meter, top layer 15 mm cement plaster (1: 1/2:2) (1 cement 1/2 coarse sand : 2 stone chipping 10 mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately) complete all as specified and directed by Engr-in-charge.
Forming groove of uniform size 15 mm wide and 15 mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to under layer including removal of wooden battens repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engr-in-Charge.
Dismantling existing tanks exc 250 & not exc 500 and S&F New Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed by Engr-in-charge.
Dismantling existing tanks exc 500 & not exc 1000 and S&F New Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed by Engr-in-charge.
S&F in repairs of 15mm dia bore gun metal ball valve complete all as specified and directed by Engr-in-charge.
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed by Engr-in-charge.
M&L for bricks works with sub class "B" bricks straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed by Engr-in-charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing)removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-charge.
M&L for 25mm thick cement concrete flooring (1:2:4) type B1 using 20 mm graded stone aggregate finished even and fair complete all as specified and directed by Engr-in-charge.
M&L for Screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes complete all as specified and directed by Engr-in-charge.
M&L for Non-skid joint free ceramic coloured printed tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-charge.
M&L for rendering 10 mm thick in CM (1:3) finished even and fair as on brick or concrete surfaces for laying wall tiles complete all as specified and directed by Engr-in-charge.
M&L for colour joint free Glazed ceramic tiles in vertical surface 350x250x7mm/ 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed by Engr-in-charge.
M&L for Dark Shade Vitrified ceramic tiles 10 mm thick (Square/rectangular) polished area of each tiles not exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and directed by Engr-in-charge.
Demolition of cement concrete reinforced in any position including cut of bars as required complete all as specified and directed by Engr-in-charge.
M&L for machine cut kota stone slab flooring 20-25 mm thick (minimum size 55 cms x 55 cms) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing complete all as specified and directed by Engr-in-charge.
M&L for Reinforced cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-charge.
M&L for Form work to soffits of suspended slab such as roof slab, floor slab etc n exc 200 mm thick rough finished surface of concrete slab complete all as specified and directed by Engr-in-charge.
M&L for rough finished surfaces if concrete formwork to sides and soffits if floor or roof beams haunching girder bressummer chajja shelves including supports complete all as specified and directed by Engr-in-charge.
M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-charge.
M&L for Mild steel bars 5mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips and including 10mm dia in stirrups, spacers and binders complete all as specified and directed by Engr-in-charge.
Demolition of cement concrete (un reinforced) in ground floors and pavings exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-charge.
M&L for 100mm thick cement concrete (1:2:4) type-B2 using 40mm graded stone aggregate as in path/ plinth protection finishing cement concrete surface even and smooth without using extra complete all as specified and directed by Engr-in-charge.
M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-charge.
M&L for 100 mm thick PCC (1:4:8) type B2 using 40 mm graded crushed stone aggregate as in PCC hard standing, finish the surfaces even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.
Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-charge.
M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm m thickness, M-35 grade With grey cement and no pigment complete all as specified and directed by Eng-in-charge.
M&L for cement concrete chequered tiles 20cmx20cmx25mm thick set & jointed with cement mortar (1:3) & pointed in neat cement slurry with grey cement and pigments including 20 mm thick screed bed in cm (1:6) complete all as specified and directed by Engr-in-charge. Make :- Coral/Terra ferrma/Ultra
Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed by Engr-in-charge.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-charge.
S&F 0.56 mm Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed by Engr-in-charge.
Dismantling of wrought iron or Mild Steel work of any description complete all as specified and directed by EIC complete all as specified and directed by Eng-in-charge.
S&F roof trusses Fe 410-W (Gde E-250) quality -A (framed), trussed, purling, wind tie, crane gentries and rail and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections )including distance pieces, cleats etc complete all as specified and as directed by Engr-in-Charge.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Eng-in-charge.
Dismantling fencing wire mesh, any type complete all as specified and directed by Engr-in-charge.
S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia babed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed by Engr-in-charge. (each line wire to be measured)
M&L for concertina coil reinforced punched (chrome razor or blade wire) with barbed tap of 0.5 mm thick galvanized steel sheet and core wire of dia 2.5mm high tensile steel wire complete all as specified and directed by Engr-in-charge.
Dismantling posts/struts (wood, steel or RCC) any section including taking out embedded portion from concrete/brick masonry etc and making good disturbed ground complete all as specified and directed by Engr-in-charge.
S&F mild steel Fencing post and struts, channel, angle or tee sections, fixed independently without connecting plates etc cut to ordinary lengths complete all as specified and directed by Engr-in-charge.
M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-charge.
M&L for providing and injecting chemical emulsion for post construction anti-termite treatment along external wall where the acron is not provided using chemical emulsion @7.5 Ltr per Sqm of the vertical surface of the sub-stucture to a contrat of 300mm including excavating channel roding etc complete all as specified and directed by Engr-in-charge.
M&L for filling voids in masonry using chemical emulsion @ one ltr per hole at a distance of 300mm center to centre (Apart) including drilling holes at 45 degree and replugging the existing floor etc complete all as specified and directed by Engr-in-charge.
M&L for treatment to soil under existing floor using chemical emulsion @ one ltr per hole at a distance of 300mm center to center (apart) including drilling and plugging 12mm dia holes with cm (1:2) to match the existing floor etc complete all as specified and directed by Engr-in-charge.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm complete all as specified and directed by Engr-in-charge.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm and but n, exc 4 Sqm each for archives soffits, linings window boards etc complete all as specified and directed by Engr-in-charge.
S&F for anodised aluminium frame (minimum 50 micron powder coating) for doors windows ventilators with one or more rebates including cleat for fixing etc complete all as specified and directed by Engr-in-charge.
S&F Aluminium powder coated of any colour (thickness or powder coating not less than 50 micron) doors shutters aluminium saction weighing 0.55 Kg/Sqm including necessary jointing cleats glazing clips rubber neoprene packing handles two nos in each door hinges anodised aluminium snap beading screws complete all as specified and directed by Engr-in-charge.
S&F aluminium powder coated of any colour (thickness or powder coating not less than 50 micron) windows and ventilator shutters with aluminium grill side hung type without sash bars aluminium section weighing 0.55KG/Sqm including necessary jointing cleats glazing clips rubber packing anodised snap beading screws anodised aluminium fitting such as peg stay 150 mm long (01 No) hinges type B2 100 mm long (02 No) suitable handle (01 No) complete all as specified and directed by Engr-in-charge.
S&F 12mm thick prelaminated particle board interior grade prelaminated both side with decorative choice lamination fixed with screws to timber frame work or as in cubicals, partition or cupboards, complete all as specified and directed by Engr-in-Charge.
S&F double action floor spring hydraulically regulated made up of aluminium 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engr-in-charge.
S&F 4 lever brass mortice lock, vertical type , size 100 mm complete all as specified and directed by Engr-in-charge.
M&L for false ceiling of approved (ISI marked) make with 4mm thick HPS board fixed to galvanised iron steel angled grid 600x600mm size suspended system fixed to MS framed work of approved make and section as specified in SSR Part I with suitable hook/fasteners and GI/almn suspenders not less than 3mm dia @ 1.00m C/C minimum. ceiling system is to be fixed in water level without any sag and dismantling old ceiling board with frame complete all as specified and directed by Engr-in-Charge.
Taking up or down PPR/GI tubing 20 mm bore pipe complete all as specified and directed by Engr-in-charge.
S&F 15mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed by Engr-in-charge.
S&F 20mm bore GI tubing medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed by Engr-in-charge.
S&F in repairs of vitreous China squatting pan of Orissa pattern of approved make of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe including lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and directed by Engr-in-charge.
S&F in repairs of vitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling and including fixing of tap, waste fitting and union complete all as specified and directed by Engr-in-charge. Note : Pillar tap shall be measured as supply only under respective item.
S&F in repairs of PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and directed by Engr-in-charge.
S&F in repairs of 45cm long PVC connection with two no PTMT nut and rubber washers suitable for 15mm bore GI Pipe complete all as specified and directed by Engr-in-charge.
S&F in repairs of 75mm dia of outlet cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate complete all as specified and directed by Engr-in-charge.
S&F in repairs of PVC flush pipe of 32mm dia pipe for connecting low level flushing cistern including jointing to WC complete all as specified and directed by Engr-in-charge.
S&F in repairs of for angle stop valves 15mm bore (for iron pipe) fancy type chromium plated screwed down high pressure with butterfly handle screwed both ends including fixed in repair complete all as specified and directed by Engr-in-charge.
S&F in repairs of Wall mixture 15mm bore dia cast copper alloy with cap capston chromium plated screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly buts screwed for iron pipe complete all as specified and directed by Engr-in-charge.
S&F Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed by Engr-in-charge. Note: Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe.
S&F of stainless steel health faucet 1.5 mtr long complete all as specified and directed by Engr-in-charge.
Taking up or down PPR/GI tubing 15 mm bore pipe complete all as specified and directed by Engr-in-charge.
M/S AKASH CONSTRUCTION COMPANY
J.P. Enterprises
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .