WBPWD/EE-II/KNHED/NIQ-50/24-25

Amount

SUB -HEAD-1……...DISMANTLING Dismentling the existing damaged wirings, Switch board, DB's etc. by Co's own tools & tackles and mending good the damages to original finish including handing over the dismantled materials to section office as per direction of EIC

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FRLS' PVC insulated & unsheathed copper wire (Make: R.R Kable / Polycab / Havells/Glostar/KEI) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC,to light/fan/call bell points with Modular type switch (Anchor Roma plus / Legrand-Myrius / Schneider-Zencelo/LK -Entice/Wipro- NOWA/ABB Ivie) fixed on Modular GI switch board complete as per gs [only PVC Rigid Conduit on ceiling and remaining portion concealed] a. Average run 8 mtr. [4(c)/E-25].

b. (Average run 10 mtr.). [4(e)/E-25].

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Make: R.R Kable / Polycab / Havells/Glostar/KEI) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 6A 3 pin Modular type plug socket & switch (Anchor Roma plus / Legrand-Myrius / Schneider-Zencelo/LK -Entice/Wipro- NOWA/ABB Ivie) on 4 Module GI switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works a. On Board

SUB-HEAD 2-- PLUGS & SOCKETS Supply & Fixing 240 V, 2 nos. 6 A, 3 pin Modular type plug socket with 2 nos. 6A Modular type switch (Anchor Roma plus / Legrand-Myrius / Schneider-Zencelo/LK -Entice/Wipro- NOWA/ABB Ivie) on 6 Module GI Modular type switch board 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (1(b)/E-17+3(a)/E-17+4(a)/E-17).

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Anchor Roma plus / Legrand-Myrius / Schneider-Zencelo/LK -Entice/Wipro- NOWA/ABB Ivie) with 16A Modular type switch, without plug top and 6 A, 5 pin Modular type plug socket with switch on 6 Module GI Modular type switch board with 3 nos cu. bar with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (1(c)/E-17+3(a)/E-17+3(b)/E-17+4(a)/E-17+4(b)/E-17).

Supply & Fixing 240 V, 3 nos. 6 A, 3 pin Modular type plug socket with 3 nos. 6A Modular type switch and 1 nos 16 A, 3 pin Modular type plug socket (Anchor Roma plus / Legrand-Myrius / Schneider-Zencelo/LK -Entice/Wipro- NOWA/ABB Ivie) with 16A Modular type switch, without plug top , 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 4 nos. 16 A, 3 pin Modular type plug socket with 4 nos. 16A Modular type switch (Anchor Roma plus / Legrand-Myrius / Schneider-Zencelo/LK -Entice/Wipro- NOWA/ABB Ivie) 20A Modular switch type SP MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [15/E-19].

Supplying & Fixing CRC sheet metal (16 SWG) JB-cum- Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. bakelite/Perspex/coloured Perspex (wall matching colour) top cover 3 mm thick flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works [10/ E-4 ] a. 175 mm x 100 mm x 65 mm

b. 200 mm x 150 mm x 65 mm

SUB-HEAD 3--BDB,PDB,VTPN, Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall as per GS. a. 2+12 Way (Make-Legrand/LK/Schneider/ABB/Siemens) [13/D-9]

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Make-Legrand/LK/Schneider/ABB/Siemens) . [ 14/D-10] a. 6 way, Enclosure

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Make-Legrand/LK/Schneider/ABB/Siemens) a. Up to 160A 8 way Enclosure [15/D-11]

Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for TPN DB horizontal / vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment (Make-Legrand/LK/Schneider/ABB/Siemens) [16/D-12] a. For 6 way Horizontal TPN DB.

b. For 8 way VTPN DB.

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection (Make-Legrand/LK/Schneider/ABB/Siemens). [ 10/D-8] a. 100A

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as per GS (Make-Legrand/LK/Schneider/ABB/Siemens) [6/D-5] a. 100A FP

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS (Make-Legrand/LK/Schneider/ABB/Siemens) a. 63A TP

SUB-HEAD 4- Drawing Cables & Wires. Supply & Laying of 4 core 35 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting. (make-- Havells/Gloster/KEI/Polycab/RR kable/Mescab)

Laying only of 4 core 95-120 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : [7/F-4] a. For 4 core 35 sqmm

b. For 4 core 95 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : a. For 4 core 35 sqmm

b. For 4 core 95 sqmm

Cutting channel of 31 mm x 31 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire fish wire incl. mending good damages to building works, 13 mm dia 3 mm thick polythene pipe without earth continuity wire . [2a/E2]

Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works, 19 mm dia 3 mm thick polythene pipe without earth continuity wire [3a/E2]

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works a)20mm size. [7a/E16]

Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works a. 100 mm x 100 mm x 65 mm [11(a)/E-4]

b. 150 mm x 100 mm x 65 mm [11(b)/E-4]

Supply & Fixing bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required a. 100 mm x 100 mm x 65 mm [12(a)/E-4]

b. 150 mm x 100 mm x 65 mm [12(b)/E-4]

Supplying and Drawing 1.1 KV single core stranded ''FRLS' PVC insulated & unsheathed copper wire (Make: R.R Kable / Polycab / Havells/Glostar/KEI) of the following sizes in the prelaid polythene pipe as per GS. a. 2 x 84 / 0.3 (6 sqmm) + 1 x 56 / 0.3 (4 sqmm) as ECC [1.y/E-9]

b. 2 x 56 / 0.3 (4 sqmm) + 1 x 36 / 0.3 (2.5 sqmm) as ECC [1.v/E-9]

c. 2 x (2.5 sqmm) + 1 x (1.5 sqmm) [1(s)/E-9]

d. 3 x 22 / 0.3 (1.5 sqmm) [1.b/E-9]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. a. 2.5 sqmm [9 (i)/F-5]

b. 4 sqmm [9(ii)/F-5]

c. 6 sqmm [9(iii)/F-5]

S/F of 150mm x 50 mm U-PVC DLP Trunking system (Legrand) width 130mm suitable for 150mm as per direction of EIC. (Legrand cat. No. - 010432).

S/F of 150mm x 50 mm U-PVC DLP Trunking system (Legrand) cover as per direction of EIC. (Legrand cat. No. - 010524).

S/F of 150mm x 50 mm U-PVC DLP Trunking system (Legrand) base joint as per direction of EIC. (Legrand cat. No. - 010691).

S/F of 150mm x 50 mm U-PVC DLP Trunking system (Legrand) joint cover as per direction of EIC. (Legrand cat. No. - 010804).

S/F of 150mm x 50 mm U-PVC DLP Trunking system (Legrand) end cap as per direction of EIC. (Legrand cat. No. - 010706).

S/F of 150mm x 50 mm U-PVC DLP Trunking system (Legrand) internal angle (80 - 100 deg.) as per direction of EIC. (Legrand cat. No. - 010602).

S/F of 150mm x 50 mm U-PVC DLP Trunking system (Legrand) external angle (60 - 100 deg.) as per direction of EIC. (Legrand cat. No. - 010622).

SUB-HEAD 5- Fixing of Light fittings Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mm x 125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2 x 24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [17/C-2]

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [16/ C-2 ]

SUB-HEAD 6- SUPPLY OF LIGHT FITTINGS S & D LED recess type 18 wt (1 ft x 1ft) light fitting (Philips make, cat no -- RC360B LED 25S 6500 L30 W30 PSU OD/ CG LCTLRNE-18-CDL (1'X1')/ Wipro LD81-271-XXX-60-SM/ Bajaj BZRSQL - 18L WH OD SD/Havells Pluto 1X1 PLRWLED857SG2) complete set.

S & D recessed & surface mounted decorative LED ceiling tile 36 Wt (2'X2' ft) (Make Philips RC380B LED36S-6500 G6 L60W60 PSU OD/Crompton cat no LCTLRNE-36-FO-CDL/ Wipro LM10-451-XXX-65-G2/ Bajaj BZRSQL - 36 wt LED GX WH/Havells Venus Trend) incl. S & F flat difcuser complete set.

S/D 4feet single commercial LED type fluroscent light fittings (make-- Philips TMC 502 1xT-LED 22W/ CG Eco-I IGP161LT8-16 1XT8/Wipro WIO921208P/Bajaj BLRB-DB-118/Havells Regal Batten) complete with all accessories with 1X18/20 Wt LED tube lamp corresponding to(Make- Philips MAS LED Tube 1200mm 18W 865 T8 I, 2100lm/ Crompton LT8-20-865-(2) ULTRON/ Wipro LL13-181-65SESL1-G1/Bajaj BLRB 20W CW LED/Havells Titania Neo)

S/D 4feet twin commercial LED type fluroscent light fittings (make-- Philips TMC 502 2xT-LED 22W/ CG Eco-I IGP161LT8-16 2XT8/ Wipro WIO922208P/Havells Regal Batten) complete with all accessories with 2X18/20 Wt (Make-Crompton LT8-20-865-(2) ULTRON/ Bajaj BLRB-DB-118) LED tube lamp corresponding to (Make- Philips MAS LED Tube 1200mm 18W 865 T8 I, 2100lm / Crompton LT8-20-865-(2) ULTRON/ Wipro LL13-181-65SESL1-G1/ Bajaj BLRB 20W CW LED/Havells Titania Neo)

S&D of 1X18/20 Wt LED tube lamp corresponding to(Make- Philips MAS LED Tube 1200mm 18W 865 T8 I, 2100lm/ Crompton LT8-20-865-(2) ULTRON/ Wipro LL13-181-65SESL1-G1/Bajaj BLRB 20W CW LED/Havells Titania Neo)

SUB-HEAD 7 -- FIXING OF FANS Supplying & Fixing iron beam fan clamp of two piece type, as per approved specification, fabricated from 40 mm x 9 mm MS sheet flat suitable for beam having flange upto 150 mm wide – (As per Drawing no. 476 of PWD Specification Book – May 1991) [30/D-14]

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991) [29/D-14]

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/ perspex top cover incl. making necy. connections etc. [18(a)/E-6]

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc as per GS [21(a)/C-3]

Supply & Fixing louver shutter ( Aluminum)on wall with necy. bolts & nuts (6 mm dia x 62 mm long) as per GS a. 300mm (12") [32(a)/D-14]

SUB-HEAD 08 -- SUPPLY OF FANS S & D 230V,1200mm sweep ceiling fan, air delivery 230 CMM, (make-- Usha Striker 1 star/CG Hi speed (HS) 1 star/Orient Falcon-425 SHS) complete with blades, canopy, fork, rubber bush, down rod, 1000mm safety wire & S3 capacitor etc.

SUB-HEAD 09 -- Earthig Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl.S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: i)By ISI-Medium GI pipe

Extra for providing masonry enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement mortar (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

Extra for treatment of soil by using salt & charcoal or coke for plate electrode

Excavation of soil for installation of Earth Electrode and filling & ramming as per GS a. For Soft Soil [ 1(a)/G-1]

SUB-HEAD 10 -- Fire Detection Testing, recommissioning of existing FDS panel (make-Simens) including checking and rectification of faults of the system network of Fire detection system by expert personel and submissin of test report as per ins. Of EIC.

Supply, Installation,Testing & Commisioning of Micropresssor controlled Addressable Multisensor detector IP 42 ( VDS / UL /ERTL/ LPCB / FM approved ) with inbuilt optical smoke sensors and heat detector sensor with inbuilt short circuit fault isolator as per NFPA style 7 wiring complete with base (Note : Detectors without built-in fault isolator is also acceptable provided one independent short circuit fault isolator per detector is to be provided extra without extra cost) the detectors should have built in response indicator with LED indicator. The detector should have 360 degree optical view with single / multiple LED that blinks on actuation of detector. Reverse polarity or faulty zone wiring shall not damage the detectors. (Approved Make: Siemens) (matching with existing FD System)

Dismentling, rewiring & refixing and readdressing of existing detectors (without damaging the same), wire, conduit pipe and other FD system items as required during civil & electrical renovation work as per direction of EIC.

Supply & Laying of 2 Core 1.5 sq.mm FRLS shielded copper Cable (For Loop) (Make. Finolex/Gloster/ RR Kable/Polycab ) through 19 mm dia PVC 'FR' type Rigid Conduit pipe with necessary arrangement as per G.S. (Make : Precision/ Polycab) on the surface of the wall.

(Rate should be quotated including all taxes and duties and GST)

MANNA ELECTRONICS AND ELECTRICAL WORKS (BID ID -5724776)

M/S R. K. ENTERPRISE (BID ID -5720117)