CERTAIN SANCTIONED SPECIAL REPAIR WORKS AT DAMANA UNDER GE JAMMU

Amount

B/R Portion: - Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm including cutting holes for taking out holdfasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish (without any extra cost to Govt) and removing from site complete all as specified and as directed by Engineer-in-Charge.

Material and labour factory made pressed steel frames of size 125 x 60mm made out of PBI sheet 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinge, lock strike plate etc. complete including bottom of each chowkhat to be welded with 02 no's 25x25x3mm angle iron projecting 10cm on either side including one shop coat of red oxide chrome primer and including PCC (1:3:6) type C-0 in back filling of chowkhats and tarring back of chowkhats and holdfasts complete all as specified and as directed.

Supply and fixing 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type with lipping/ frame to match complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 35mm thick factory made Ist class hard wood, glazed and skelton shutter open rebated and prepared to receive glass, guage, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR 2009 Pt-I Section 8.24 (b) supplied and fitted to chowkhats complete all as specified and as directed.

Supply and fixing mild steel butt hinges medium weight 100 mm long complete all as specified and as directed.

Supply and fixing aluminium handle cast type, anodised size 150mm long, 'D' type complete all as specified and as directed.

Supply and fixing aluminium anodised barrel tower bolts of extruded section with bright bolt and fixed 200mm complete all as specified and as directed.

Supply and fixing 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply and fixing galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

Supply and fixing in repairs Helical door spring 150mm including roller and roller plate complete fixed with welding to existing steel chowkhats complete all as specified and as directed.

Supply and fixing 3mm thick ordinary glass sheet quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane including punching or drilling out old glazing pins or spring clips and providing and fixing new clips or pins including scaffolding to reach upto 4 storey building complete all as specified and as directed.

Material and labour for applying two coats of synthetic enamel paint on wooden surface over one coat of pink primer including preparation of new surface over 10cm width or girth complete all as specified and as directed.

Material and labour for applying two coats of synthetic enamel paint on steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of new surface complete all as specified and as directed.

Dismantling of asbestos cement (corrugated or semicorrugated etc) sheets in roof covering complete all as specified and as directed.

Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling of timber scantling 40 Sqcm and over in section framed work of any description complete all as specified and as directed.

Supply and fixing structural steel works of Fe-410W (Grade 'E' 250) quality 'B', as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including painted one shop coat of zinc chromate/ red oxide primer paint (including preparation of surfaces) before fabrication complete all as specified and as directed.

Material and labour for plates (plain or chequered channels, square cut or notched (ordinary and counter sunk) forming holes Fe-410 W (Grade 'E'-250) quality 'B' without any attachment complete all as specified and as directed.

Material and labour for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 22.5cm and not exceeding 30cm long, diameter of neck 16mm to 20mm complete all as specified and as directed.

Dismantling of boarding with frame any description fixed in any position with nail complete all as specified and as directed.

Supply and fixing 4mm thick of size 605 x 605 mm, white pre-premiered, self embossed, reinforced designer board for false ceiling conforming to IS-14862 and ISO-8336:1993 and GI section frame work (powder coated) for white, pre-premiered, self embossed, reinforced designer board consisting of perimeter wall angle 19mm x 19mm x 0.45mm, cross 'Tee' 28.6mm (web) x 24mm flange. 33mm thick powdered coated main tee 38 (Web) x 24mm flange 0.33mm thick. Wall angle screwed fixed to brick wall / partition wall / concrete / RCC with the help of nylon sleeves and screws @ 610 mm centre to centre, then suspending GI main 'Tee' in both directions by means of hangers with alignment @ 1220mm centre to centre to soffits. To from grid of 610 x 610mm cross Tee shall be provided @ 610mm centre to centre in both directions. Suitable provisions shall be made for fixing the recessed / surface mounting light fittings if any complete all as specified and as directed by Engineer-in-Charge.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed.

Material and labour for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed.

Taking down cement plaster of any description on brick walls, concrete surfaces including racking out joints, hacking for key, scrubbing down with water etc. complete removal of debris outside MOD land. (Including all necessary scaffolding, lifting arrangement upto 12 metre height for external surfaces).

Material and labour for rendering 10 mm thick cement plaster (1:6) on other than fair faces of brick work or concrete surfaces and to be finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15 mm thick cement plaster (1:4) on fair faces of brick work or concrete surfaces and to be finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparing of new plastered surface of wall and applying 1mm thick wall care putty and applying two coats of distemper oil bound over primer coat complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer on surfaces of walls complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

Material and labour for 25 mm thick PCC (1:2:4) type B-0 (using 12.50 mm graded crushed stone aggregate) as in floor base and finished the surface to receive tiles complete all as specified and as directed.

Material and labour for 15 mm thick screed bed or bedding layer of mortar in cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed by Engineer-in-Charge.

Dismantling of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Material and labour for form work to sides and soffits of floor or roof beams, beam haunching, lintel etc rough finished surfaces of concrete flats complete all as specified and as directed.

Material and labour for TMT bars (Fe 500), 10 mm dia and over in reinforcement cut to length, bent to shape required including bending spirally cranking, hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for TMT bars (Fe 500), 5mm dia and over upto including 10mm dia stirrups bending spirally or hooping for columns, hooking ends and binding with mild steel wire not less than 0.90mm dia complete all as specified and as directed.

Material and labour for RCC M-25 design mix as in beams, cantilivers, bressummers, lintel over 1.5m span complete all as specified and as directed.

Material and labour for cement concrete (1:5:10) type E-2 (using 40 mm graded crushed stone aggregates) in foundation filling and mass concrete complete all as specified and as directed.

Material and labour for 50mm thick cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in floor/ plinth protection laid in suitable panels finished even and fair all as specified. 6mm joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 grade and three parts of sand (all by weight) complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and complete removal of debris outside MOD land complete all as specified and as directed.

Material and labour for plain cement concrete (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in coping including weathering, slightly rounded or chamfered angles and including necessary formwork complete all as specified and as directed.

Material and labour for 75mm thick cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection laid in suitable panels finished even and fair all as specified. 6mm joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 grade and three part of sand (all by weight) complete all as specified and as directed.

Material and labour for cement concrete (1:2:4) type B-0 (using 12.50mm graded crushed stone aggregate) for 40mm thick floor as in sub base for floor tiles complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete all as specified and as directed.

Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) in verticle surfaces such as skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 Sqm each including cutting holes for taking out holdfasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish (without any extra cost to Govt) and removing from site complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 35mm thick second class hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. by Engineer-in-Charge.

Supply and fixing 35mm thick factory made second class hard wood, glazed and skelton shutter open rebated and prepared to receive glass, guage, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR 2009 Pt-I Section 8.24(b) supplied and fitted to chowkhats complete all as specified and as directed.

Supply and fixing box type steel windows/ Ventilator (factory made) outer frame made out ERW tube 'P' section 65 x 45 x 25 mm and shutter of ERW tube 'P' section 50mm x 35mm x 20mm openable (double shutter) with glazed shutter on external side and gauzed shutter on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 no's on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes suitable for fixing cooler/ AC window complete all as speciifed and shown on drawings No CEPZTD-324/07 Sheet 1/3 to 3/3 and all as directed. Notes: - The quoted rates shall also include: - (i) One coat of tar on the ends of steel surface in contact with bricks/ concrete surface. (ii) 4 no's MS steel lugs made of 20 x 5 mm iron flat 200 mm long. (iii) 10 mm Sq Bar grill/ guard bar design as per drawing. (iv) PCC block for embedding lugs.

Supply and fixing aluminum anodised bow handle fabricated type extruded section of 150mm long complete all as specified and as directed.

Supply and fixing mild steel helical door spring 300mm including roller and roller plate complete fixed with welding to existing steel chowkhats complete all as specified and as directed.

Supply and fixing 150 mm overall length of cover plate of floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and as directed by Engineer-in-Charge.

Material and labour brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed.

Material and labour for rendering 10mm thick on fair faces of brick work or concrete surface in cement mortar (1:6) surface finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick surface finished even and fair complete all as specified and as directed. (Including all necessary scaffolding, lifting arrangement upto 12 metre height).

Material and labour for preparing of new plastered surface of wall surface and finishing wall surface with acrylic smooth exterior paint of required shade (Two coat over and including priming coat of exterior primer applied as per manufacturer instructions) (including all necessary scaffolding, lifting arrangement upto 12 metre height) complete all as specified and as directed.

Supply and fixing machine cut kota stone slab flooring 18-20mm thick over 20 mm thick cement screed bed in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing machine cut kota stone slab 18-20mm thick over 10 mm thick as in vertical surface over rendering in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of old steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old wood surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

E/M Portion: - Taking down old unserviceable copper/ aluminium point wiring concealed / batten (light, fan, socket or power) complete including fixture and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type of switch board wooden/ iron, round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

Taking down carefully unserviceable distribution boards of any type/ size with MCB's and disconnecting and making good disturbed surfaces complete all as specified and as directed.

Material and labour in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sqmm for phase and neutral and one run of 6.0 Sqmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/ neutral and one run of cable for earth will be measured and paid as one unit length including taking down old wiring complete all as specified and as directed. Note: - Wiring shall be done in proper colour coding.

Material and labour in replacement for complete point wiring with 1.5 Sqmm single core multistranded copper conductor FRLS insulated and unsheathed heavy duty cable in colour code including continuous earth wire with cable of size 1.5 Sqmm copper conductor flexible FRLS insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall, plastering after concealing conduit, including modular galvanised flush boxes of suitable size and white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc and including making good the disturbed surface as per existing complete all as specified and as directed by Engineer-in-Charge for the following: -

Description all as per Ser item No 65.00 here-in-before but for multi 5 pin 5 amp socket outlet on same board ISI marked complete all as specified and as directed.

Description all as per Ser item No 65.00 here-in-before but for multi 5 pin socket outlet 5 amp socket on independent board ISI marked complete all as specified and as directed.

Description all as per Ser item No 65.00 here-in-before but for multi 6 pin 15 Amp socket outlet independent controlled by 15 Amp switch with 2.5 Sqmm copper conductor multistranded cable PVC insulated FRLS and unsheathed cable in and including PVC rigid concealed conduit 20/25 mm dia and unsheathed copper conductor multistranded cable 2.5 Sqmm as earth wire FRLS PVC insulated in green color complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement modular socket, 6 A - 5 pin combined 2 module, 240 volts ISI marked complete all as specified and as directed.

Supply and fixing in replacement modular switch 1 module 6 A, 1 module, 240 volts ISI marked complete all as specified and as directed.

Supply and fixing in replacement ceiling rose, 3 Pin/ PVC/ polycarbonate isolated body ISI marked complete all as specified and as directed.

Supply and fixing in replacement modular switch 1 way 16 A, 1 module, 240 volts ISI marked complete all as specified and as directed.

Supply and fixing in replacement modular socket 6A/16A - 6 pin combined 2 module, 240 volts ISI marked complete all as specified and as directed.

Material and labour in repair for lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

Material and labour in repair self ballast LED retrofit lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K complete all as specified and as directed.

Supply and fixing in replacement LED lights fitting 1 x 20 W, 220 V, AC decorative box type complete with LED tube rod 18 watts driver, holder and power factor >0.9, 100 Lumen/Watt, 6500 K cool day type conforming to ISI including LED tubelight connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep minimum air delivery 245 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

Material and labour for replacement distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and as directed by Engineer-in-Charge. Note: - Distribution board and MCB's should be of same make.

Supply and fixing in replacement SPN 40 to 63 Amp rating 240 V, 10 KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB distribution board complete with connection, testing and commissioning complete all as specified and as directed.

Supply and fixing in replacement 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of single pole and current carrying capacity 6 to 32 amp complete with connection, testing and commissioning complete all as specified and as directed.

Material and labour for earthing complete with galvanised mild steel earth plate electrode of size 600 x 600 x 6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 metre deep below normal ground level with top edge of the earth plate not less than 1.5 metre below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC (1:2:4) type B-1 precast RCC cover slab using reinforcement with suitable handle made of round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specified and as directed.

Supply and fixing in replacement LED street light fitting 35 watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP-65/66 protection complete all as specified and as directed.

Disconnecting and taking out defective underground cable any size and any type from trenches, roof, pole, pipe, floor, wall etc complete all as specified and as directed.

Supply and laying, connecting and testing XLPE underground cable insulated and overall sheathed with aluminium conductor heavy duty 1100 volts grade 16 Sqmm 2.0 core laid in trenches / on poles / road crossing or passing through existing / new pipe under road crossing, clamping on wall etc complete all as specified and as directed.

Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

Supply and fixing in replacement fan step regulator, 100W - 1 module 240 volts ISI marked complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

Supply and laying, connecting and testing XLPE underground cable insulated and overall sheathed with aluminium conductor heavy duty 1100 volts grade 10 Sqmm 2 core laid in trenches / on poles / road crossing or passing through existing / new pipe under road crossing, clamping on wall etc complete all as specified and as directed.

M/s Koul & Sons (BID ID -3264660)

Nitika electricals and engineers works (BID ID -3269994)

AJAY KUMAR (BID ID -3263386)

Kanwal Nain Behl (BID ID -3264293)

M/S VERMA ENTERPRISES (BID ID -3262693)

M/S TRIKUTA BUILDERS (BID ID -3264893)