Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹5.1 Cr
EMD Value
₹7.7 L
Closing Date
19 Jul 2024, 10:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Rural Development and Panchayat Raj Department
RAVI H B
CONSTRUCTION OF 10 BEDDED AYUSH HOSPITAL BUILDING IN THIRTHAHALLI THIRTHAHALLI TALUK SHIMOGA DISTRICT
RDPR/2024-25/BD/WORK_INDENT5745
RDPR/2024-25/BD/WORK_INDENT5745
Open
Buildings
Two Tender Document System(Two Cover)
RDPR Division Office Shivamogga
18 documents required · 18 mandatory
Workdone:- Mandating satisfactorily completion as a prime contractor for at least one similar nature of work value not less than Rs 256.18 lakhs.(Contractor should clearly mention work Indent No. in work done certificate
Executed quantity The tenderer should submit the work done for the following Quantities in any one year of the past five years 2019 -20 to 2023 -24
The Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works for an amount not less than Rs 19.94 Lakhs (in any one year 2019-20 to 2023-24) along with Electrical License/Registration copy.
The Tenderer or his identified sub-contractor should possess valid license for executing water supply/sanitary engineering works and should have executed similar water supply/sanitary engineering works for an amount not less than Rs 21.40Lakhs (in any one year 2019-20 to 2023-24).
The Bidder should have three engineer graduate for supervision works. Relevant document shall be scanned and uploaded in the kpp- portal
EMD:- 1.5% of Amount put to tender i.e. Rs 7.68Lakhs.
Each Tenderer should further demonstrate Availability by owning at least 50 % of the required following key and critical equipments for this work (b) the remaining 50 % can be deployed on lease/hire for all works provided, the relevant documents (commitment agreements etc.,) for availability for this work are furnished
Valid registration certificate No and date The Contractor have to submit the license copy registered duly renewed for the period in PWD)
ESI CERTIFICATE
LABOUR CERTIFICATE
EPF CERTIFICATE
GST REGISTRATION CERTIFICATE
Turnover To qualify for award of this contract each tender in his name should have in the last five years achieved in at least two financial year a minimum financial turnover of (In all classes of civil Engineering Construction works only of Rs 1024.75 lakhs(UDIN Number should be compulsorily mentioned in Turnover Certificate)
LOC:- The bidder must submit availability of Credit facilities not less than Rs. 139.74lakhs. Issued by Nationalized /Scheduled Bank for the particular work.
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity
ITR FILLED COPY 2019-20 TO 2023-24
Address of the registered office with telephone No. e-mail etc.,
Latest GST Tax clearance certificate TIN
Work shall be executed as per KTTP act.
The Contractor shall prior to commencing the works effect and thereafter maintain insurances in the joint names of the Employer and the Contractor cover from the first working day after the Start Date to the end of Defects Liability Period in the amounts stated in the Contract Data
The Building constructed under this programme shall be of very high standard, requiring no major repairs at least for two (2) years after completion of construction. The contractors shall have to give guarantee for 2 years for maintenance.
Tender Validity Period i.e.135 days from the date of opening the tender.
NAME AND COMPANY ADDRESS
Local contact office Address & phone No. & designation
₹5,000
₹7.7 L
14 Jun 2024
14 Jun 2024
20 Jul 2024
26 Jun 2024
26 Jun 2024
CONSTRUCTION OF 10 BEDDED AYUSH HOSPITAL BUILDING IN THIRTHAHALLI THIRTHAHALLI TALUK SHIMOGA DISTRICT
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Earth work excavation for Foundation by mechanical
means for all works & depth upto 3 m, as per drawing
and technical specifications, including setting
out, shoring, strutting, barricading, caution li...
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...
Providing and laying in position Cement Concrete
for levelling course for all works in foundation. The
granite/trap/basalt crushed graded coarse aggregates
and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of
building, Irrigation works, Sub structure works of bridges, Drain works &
other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing Size Stone masonry with hard stone in foundation & plinth with
Cement mortar 1:6 (1 cement : 6 coarse sand)
---- With all lead and lift loading and unloading charges, hire charges of all ma...
Providing and laying in Cement Concrete for all
Basement & surface level works, return walls,
retaining walls, sunken floors etc. The granite/trap/
basalt crushed graded coarse aggregates and fine
Filling available excavated earth (excluding rock) in trenches, plinth, sides of
foundations and other similar works etc. in layers not exceeding 20cm in depth,
consolidating each deposited layer by r...
Providing and laying in position Cement Concrete for
all Super structures of building , Road works, Water
works, Irrigation works & super structure works of
bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for
all Super structures of building , Road works, Water
works, Irrigation works & super structure works of
bridges upto 3.50 m height. The granite/tra...
Providing and constructing load bearing wall with Solid Concrete blocks
of size 400x200x200mm having block density more than 1800kg/m3
and minimum compressive strength of 4.00 N/mm2 conforming to IS
Providing and constructing load bearing wall with Solid Concrete blocks
of size 400x100x200mm having block density more than 1800kg/m3
and minimum compressive strength of 4.00 N/mm2 conforming to IS
Providing and applying white cement based putty of average thickness
1 mm, of approved brand and manufacturer, over the plastered
wall surface to prepare the surface even and smooth complete as per
Providing 12 mm cement plaster finished with a floating coat of neat
cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including
rounding off corners wherever required smooth rendering, prov...
Providing 18 mm cement plaster in two coats under layer 12 mm thick
cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished
with a top layer 6 mm thick cement plaster with cement mor...
Providing 15 mm cement plaster on the rough side of single or half brick
wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners
wherever required smooth rendering, providing and removi...
Wall painting with premium acrylic emulsion paint of interior grade,
having VOC (Volatile Organic Compound ) content less than 50 g/L of
approved brand and manufacture, including applying additional c...
Finishing walls with Acrylic Smooth exterior paint of required shade :New
work (Two coat applied @ 1.67L/10 m² over and including priming coat of
exterior primer applied @ 2.20 kg/10 m²) with paint ...
Providing Salwood frames of doors, windows, clerestory windows,
ventilators and other frames, wrought, framed or assembled including
making plaster groves (excluding cost of cement concrete and side c...
Providing and fixing flush door shutter made out of solid core block board
type, well seasoned , chemicaly treated hard wood battens and internal
frame with minimum 45 mm wide wooden frame alround doo...
Providing and fixing in position fully panelled Honne wood shutters for
doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm
wide top rail and stiles 100mm wide as per drawing a...
Providing & fixing factory made PVC Door frame of size 50x47mm with
a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam
sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled
Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and
15x15mm for top & bottom rails, covered with heat moulded Pr...
Providing and fixing M.S. grills of required pattern in frames of windows
etc. with M.S. flats, square or round bars etc. including priming coat with
approved steel primer all complete. Fixed to steel...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi
chambered UPVC(Matching to RAL-9016) sections and with minimum
TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Painting Steel work with Deluxe Multi Surface Paint to give an even
shade. Two coat applied @ 0.90L/10 m² over an under coat of primer
applied @ 0.80 L/10 m² of approved brand and manufacture includ...
Painting wood work with Deluxe Multi Surface Paint of required shade.
Two coat applied @ 0.90L/10 m² over an under coat of primer applied
@0.75 L/10 m² of approved brand and manufacture to give an e...
Providing and fixing in position collapsible steel shutters with vertical
channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size,
with top and bottom rail of T-iron 40x40x6 mm, with 40 m...
Providing and laying Vitrified tiles with thickness 9-10 mm in different
sizes with water absorption less than 0.08 % and conforming to I.S. 15622,
of approved make, in all colours & shade, over 12 mm...
Providing and laying Polished Granite stone flooring in required design
and patterns, in linear as well as curvilinear portions of the building all
complete as per the architectural drawings with 18 m...
Providing edge moulding to 18mm thick Granite stone counters, vanities etc
including machine polishing to edge to give high gloss finish etc. complete
as per design approved by Engineer-in-charge. ---...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to
IS : 15622, of approved make, in all colours, shades, e...
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm
thick on 10mm thick cement plaster 1:3 and jointed with white cement
slurry over existing rough plaster surface using glazed ti...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow
tubes, channels, plates etc., including welding, grinding, buffing, polishing
and making curvature (wherever required) and fitt...
Providing and fixing Stainless Steel Fixtures conforming to 304
graded steel as per direction of engineer in charge.Providing and fixing Stainless Steel Fixtures conforming to 304
graded steel as per ...
Providing and fixing Stainless Steel Fixtures conforming to 304
graded steel as per direction of engineer in charge.SS Handles 200mm. ---- With all lead and lift loading and unloading charges, hire ch...
Providing and fixing Stainless Steel Fixtures conforming to 304
graded steel as per direction of engineer in charge.SS hinges 125 mm ---- With all lead and lift loading and unloading charges, hire cha...
Providing and fixing Stainless Steel Fixtures conforming to 304
graded steel as per direction of engineer in charge.SS Tower Bolts 200x10mm ---- With all lead and lift loading and unloading charges, h...
Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm
with suitable washers weighing not less than 33 gms ---- With all lead and lift loading and unloading charges, hire charges of ...
Providing and fixing chromium plated brass night latch of approved quality
including necessary screws etc. complete. ---- With all lead and lift loading and unloading charges, hire charges of all mach...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including cost of all materials, machinery, labour, cleaning, straightening,
cutting, bending, hooking, laping/welding joints, tyin...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
Providing and constructing load bearing wall with Solid Concrete blocks
of size 400x200x200mm having block density more than 1800kg/m3
and minimum compressive strength of 4.00 N/mm2 conforming to IS
Providing and constructing load bearing wall with Solid Concrete blocks
of size 400x100x200mm having block density more than 1800kg/m3
and minimum compressive strength of 4.00 N/mm2 conforming to IS
Providing and applying white cement based putty of average thickness
1 mm, of approved brand and manufacturer, over the plastered
wall surface to prepare the surface even and smooth complete as per
Providing 12 mm cement plaster finished with a floating coat of neat
cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including
rounding off corners wherever required smooth rendering, prov...
Providing 18 mm cement plaster in two coats under layer 12 mm thick
cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished
with a top layer 6 mm thick cement plaster with cement mor...
Providing 15 mm cement plaster on the rough side of single or half brick
wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners
wherever required smooth rendering, providing and removi...
Wall painting with premium acrylic emulsion paint of interior grade,
having VOC (Volatile Organic Compound ) content less than 50 g/L of
approved brand and manufacture, including applying additional c...
Finishing walls with Acrylic Smooth exterior paint of required shade :New
work (Two coat applied @ 1.67L/10 m² over and including priming coat of
exterior primer applied @ 2.20 kg/10 m²) with paint ...
Providing Salwood frames of doors, windows, clerestory windows,
ventilators and other frames, wrought, framed or assembled including
making plaster groves (excluding cost of cement concrete and side c...
Providing and fixing flush door shutter made out of solid core block board
type, well seasoned , chemicaly treated hard wood battens and internal
frame with minimum 45 mm wide wooden frame alround doo...
Providing & fixing factory made PVC Door frame of size 50x47mm with
a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam
sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled
Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and
15x15mm for top & bottom rails, covered with heat moulded Pr...
Providing and fixing M.S. grills of required pattern in frames of windows
etc. with M.S. flats, square or round bars etc. including priming coat with
approved steel primer all complete. Fixed to steel...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi
chambered UPVC(Matching to RAL-9016) sections and with minimum
TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Painting Steel work with Deluxe Multi Surface Paint to give an even
shade. Two coat applied @ 0.90L/10 m² over an under coat of primer
applied @ 0.80 L/10 m² of approved brand and manufacture includ...
Painting wood work with Deluxe Multi Surface Paint of required shade.
Two coat applied @ 0.90L/10 m² over an under coat of primer applied
@0.75 L/10 m² of approved brand and manufacture to give an e...
Providing and laying Vitrified tiles with thickness 9-10 mm in different
sizes with water absorption less than 0.08 % and conforming to I.S. 15622,
of approved make, in all colours & shade, over 12 mm...
Providing and laying Polished Granite stone flooring in required design
and patterns, in linear as well as curvilinear portions of the building all
complete as per the architectural drawings with 18 m...
Providing edge moulding to 18mm thick Granite stone counters, vanities etc
including machine polishing to edge to give high gloss finish etc. complete
as per design approved by Engineer-in-charge. ---...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to
IS : 15622, of approved make, in all colours, shades, e...
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm
thick on 10mm thick cement plaster 1:3 and jointed with white cement
slurry over existing rough plaster surface using glazed ti...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow
tubes, channels, plates etc., including welding, grinding, buffing, polishing
and making curvature (wherever required) and fitt...
Providing and fixing Stainless Steel Fixtures conforming to 304
graded steel as per direction of engineer in charge
SS Aldrop 16mm dia, 200mm ---- With all lead and lift loading and unloading charges,...
Providing and fixing Stainless Steel Fixtures conforming to 304
graded steel as per direction of engineer in charge.SS Handles 200mm ---- With all lead and lift loading and unloading charges, hire cha...
Providing and fixing Stainless Steel Fixtures conforming to 304
graded steel as per direction of engineer in charge.SS hinges 100 mm ---- With all lead and lift loading and unloading charges, hire cha...
Providing and fixing Stainless Steel Fixtures conforming to 304
graded steel as per direction of engineer in charg.SS Tower Bolts 200x10mm ---- With all lead and lift loading and unloading charges, hi...
Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm
with suitable washers weighing not less than 33 gms ---- With all lead and lift loading and unloading charges, hire charges of ...
Providing and fixing chromium plated brass night latch of approved quality
including necessary screws etc. complete. ---- With all lead and lift loading and unloading charges, hire charges of all mach...
Polyurethane based Single Component for Existing Surface
Providing and Applying PU based Elastomeric Liquid Applied PU
Waterproofing Membrane single component, cold applied, water based
acrylic PU dis...
Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder
of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope
compacting, including cost of materials, labour, cur...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement
including cost of all materials, machinery, labour, cleaning, straightening,
cutting, bending, hooking, laping/welding joints, tyin...
Providing and fixing Steel work in built up tubular (round, square or
rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,
fixing in position and applying a priming coat of approv...
Providing and fixing bolts including nuts and washers complete including
cost of materials, labour, usage charges of machinery complete as per
specifications and as per directions of the Engineer-in-C...
Providing and fixing precoated galvanised iron profile sheets (size, shape
and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+
0.05 %) total coated thickness with zinc coating 120 g...
Providing and fixing precoated galvanised steel sheet roofing accessories
0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2
IS: 277, in 240 mpa steel grade, 5-7 microns epoxy pri...
Providing and fixing precoated galvanised steel sheet roofing accessories
0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2
IS: 277, in 240 mpa steel grade, 5-7 microns epoxy pri...
Providing and fixing M.S. Tubular frames for doors, windows,
ventilators and cupboard with rectangular/ L-Type sections, made of
1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, wit...
Geophysical investigation at site for sinking borewells for Providing
drinking water to the habitation either through the Hand Pump MWS
or P.W.S.S, by vertical electrical sounding by adopting Venner o...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig
of capacity 300 PSIG & above 1100 CMF & above in all strata including
over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig
of capacity 300 PSIG & above 1100 CMF & above in all strata including
over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig
of capacity 300 PSIG & above 1100 CMF & above in all strata including
over burdern upto 20 m. Fixing of casing pipes, collars and ...
Sinking of Borewell of 165mm dia clear using super fast hydraulic rig
of capacity 300 PSIG & above 1100 CMF & above in all strata including
over burdern upto 20 m. Fixing of casing pipes, collars and ...
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe
grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and
latest ammendments, electrical resistance welded steel tubes, m...
Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with
all latest amendments if any for any dia. The thickness of plate used for
covering one end shall be 3mm (minimum). The dimensi...
Providing and laying at site of work MS casing caps as per IS 1239 (partII) 1982 with all latest amendments if any for any dia. The thickness
of plate used for covering one end shall be 3mm (minimum)....
Earth work excavation by manual means for drains, canals, waste weir, draft,
approach channels, key trenches, foundation of Buildings & bridges and such
simillar works in all kinds of soils, as per dr...
Making soak pit 2.5 m diameter 3.0 m deep with 45 x 45 cm dry brick
honey comb shaft with bricks and PVC S.W.R drain pipe 100 mm
diameter, 1.8 m long complete as per standard design.With common
Providing and laying in position Cement Concrete for all Super structures of
building , Road works, Water works, Irrigation works & super structure works
of bridges upto 3.50 m height. The granite/tra...
C.I. cover and frame 300x300 mm inside ---- With all lead and lift loading and unloading charges, hire charges of all machineries tools and plants, cost of all labour charges cost of farmwork cost of ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all CPVC
plain & brass threaded fittings, i/c fixing the pipe with cla...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all CPVC
plain & brass threaded fittings, i/c fixing the pipe with cla...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all CPVC
plain & brass threaded fittings, including fixing the pipe wi...
Providing and fixing Sewer (SWR) pipes, including all fittings, This
includes jointing of pipes & fittings with one step solvent cement,
trenching, refilling & testing of joints complete as per direct...
Providing and fixing Sewer (SWR) pipes, including all fittings, This
includes jointing of pipes & fittings with one step solvent cement,
trenching, refilling & testing of joints complete as per direct...
Earth work excavation for pipeline trenches in
all kinds of soils by mechanical means above 600
mm (Depth upto 1.50m not exceeding 1.5m in
width ) trench width as per drawing and technical
Refilling available earth around trenches/pipelines, cables in layers not
exceeding 20 cms in depth, compacting each deposited layer by ramming after
watering with a lead upto 50 m, and lift upto 1.5 ...
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm
C.P. brass pillar taps ---- With all lead and lift loading and unloading charges, hire charges of all machineries tools and plants,...
White Vitreous China Surgeon type wash basin of size 660x460 mm with
a pair of 15 mm C.P. brass pillar taps with elbow including operated levers ---- With all lead and lift loading and unloading charg...
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass
single hole basin mixer of approved quality and make, including painting
of fittings and brackets, cutting and making good the wa...
Providing and fixing white vitreous china pedestal for wash basin
completely recessed at the back for the reception of pipes and fittings. ---- With all lead and lift loading and unloading charges, hi...
Providing and fixing 600x450 mm beveled edge mirror of superior glass
(of approved quality) complete with 6 mm thick hard board ground fixed
to wooden cleats with C.P. brass screws and washers complet...
600 mm long towel rail with total length of 645 mm, width 78 mm and
effective height of 88 mm, weighing not less than 190 g.
---- With all lead and lift loading and unloading charges, hire charges of...
Providing and fixing trap of self cleansing design with screwed down
or hinged grating with or without vent arm complete, including cost of
cutting and making good the walls and floors :
* 100 mm inle...
Providing and fixing white vitreous china pedestal type water closet
(European type) with seat and lid, 10 litre low level white vitreous china
flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing and fixing water closet squatting pan (Indian type W.C. pan )
with 100 mm sand cast Iron P or S trap, 10 litre low level white
P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing white vitreous china flat back or wall corner type
lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes
respectively. ---- With all lead and lift loading and unload...
Providing and fixing Bib cock with wall flange made of Stainless steel with
all concealed fitting arrangements & all necessary accesories complete
- Class.Premium ---- With all lead and lift loading a...
Providing and fixing Angle cock with wall flange made of Stainless
steel with all concealed fitting arrangements & all necessary accesories
complete - Class.Premium ---- With all lead and lift loading...
Providing & fixing Health faucet.Approved Rate Pha-2 Gruha- 2025 ---- With all lead and lift loading and unloading charges, hire charges of all machineries tools and plants, cost of all labour charges...
Providing and placing on terrace (at all floor levels) polyethylene
water storage tank, IS : 12701 marked, with cover and suitable locking
arrangement and making necessary holes for inlet, outlet and ...
Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch)
suitable for bore well confirming to IS 8034-2000 specifications, to work
site with testing of as per instructions of engineer incha...
Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch)
suitable for bore well confirming to IS 8034-2000 specifications, to work
site with testing of as per instructions of engineer incha...
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement
: 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5
coarse sand (zone-III) : 3 graded stone aggregate 20 mm nomin...
Supplying heavy gauge PVC conduit pipe . mm dia.mm thick
confirming to IS 2509 with suitable size bends, metal/PVC Junction
boxes, adhesive paste etc., and running before concreting the slab. The
Supplying heavy gauge PVC conduit pipe . mm dia.mm thick
confirming to IS 2509 with suitable size bends, metal/PVC Junction
boxes, adhesive paste etc., and running before concreting the slab. The
Supplying heavy gauge PVC Conduit Pipe . dia . mm thick
with suitable size bends, metal junction boxes adhesive paste etc., by
groove cutting in the wall and fixing by bracing U or J hooks and
Supplying heavy gauge PVC Conduit Pipe . dia . mm thick
with suitable size bends, metal junction boxes adhesive paste etc., by
groove cutting in the wall and fixing by bracing U or J hooks and
Supplying and fixing sheet Metal box made out of 18 SWG sheet
metal with necessary holes for cable/conduit entry as required with one
coat of primer of approved make etc.75 x 75 x 65 mm .
Supplying and fixing sheet Metal box made out of 18 SWG sheet
metal with necessary holes for cable/conduit entry as required with one
coat of primer of approved make etc 100 x 75 x 65 mm. ---- With al...
Supplying and fixing sheet Metal box made out of 18 SWG sheet
metal with necessary holes for cable/conduit entry as required with one
coat of primer of approved make etc.135 x 75 x 65 mm. ---- With al...
Supplying and fixing sheet Metal box made out of 18 SWG sheet
metal with necessary holes for cable/conduit entry as required with one
coat of primer of approved make etc.180 x 90 x 65 mm. ---- With al...
Supplying and fixing sheet Metal box made out of 18 SWG sheet
metal with necessary holes for cable/conduit entry as required with one
coat of primer of approved make etc.200 x 90 x 65 mm.
Supplying and fixing sheet Metal box made out of 18 SWG sheet
metal with necessary holes for cable/conduit entry as required with one
coat of primer of approved make etc.135 x 160 x 65 mm. ---- With a...
Supplying and fixing sheet Metal box made out of 18 SWG sheet
metal with necessary holes for cable/conduit entry as required with one
coat of primer of approved make etc 200 x 200 x 65 mm. ---- With a...
Supplying and fixing PVC/metal conduit Deep junction box.19/20 mm deep Junction box . ---- With all lead and lift loading and unloading charges, hire charges of all machineries tools and plants, cost ...
Supplying and fixing PVC/metal conduit Deep junction box 25 mm deep Junction box. ---- With all lead and lift loading and unloading charges, hire charges of all machineries tools and plants, cost of a...
Supplying of 1440rpm heavy duty exhaust fan with bracket blades
suitable to operate on 230V 50Hz, AC Supply complete. 12" Sweep (300 mm). ---- With all lead and lift loading and unloading charges, hir...
Supplying And Fixing Metal Fan Box with Round Hook. ---- With all lead and lift loading and unloading charges, hire charges of all machineries tools and plants, cost of all labour charges cost of farm...
Supplying of Ceiling Fan with Capacitor rating As per guideline of
BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984
with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto...
Supplying, installing, testing and commissioning of Diesel Generator
set with following specifications. Power rating as per standard
reference condition as per-BS 5514/ISO 3046/ ISO 8528 & IS
Supplying of .feet -PVC Batten with integrated LED tube . W
with high quality diffuser with Life of 25000 burning hours & 70%
lumen maintenance with CRI 80. Power Input: 220-240V@
50/60Hz & Power fact...
Supply of round/square recess/surface mounted rolling type
LED Down light with . W GU 10 LED Lamp Rib Fabricated
from diecast aluminium with white powder coated prewired to
mains connector & has swive...
Supplying and wiring adopting loop system in existing PVC
Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) &
1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated
copper wire (confirming to...
Supplying and wiring adopting loop system in existing PVC
Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) &
1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated
copper wire (confirming to...
Supplying and wiring adopting loop system in existing PVC
Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) &
1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated
copper wire (confirming to...
Wiring for lighting/power circuit using one of FRLS PVC insulated
1100V grade, multistrand copper wire with low conductor resistance
single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated
1100V grade, multistrand copper wire with low conductor resistance
single core in open or concealed system of wiring with specified IS...
Supplying And fixing/replacing of 6/16/32A electrical
accessories on existing switch board. 6A Bakelite Ceiling Rose. ---- With all lead and lift loading and unloading charges, hire charges of all mac...
Supplying And fixing/replacing of 6/16/32A electrical
accessories on existing switch board.6A Pendant Holder. ---- With all lead and lift loading and unloading charges, hire charges of all machineries...
Supplying and fixing superior quality modular switch mounting
polycarbonate plate with necessary supporting back plate with required
nos. of machine screws, bolts nuts etc., complete on the existing
Supplying and fixing superior quality modular switch mounting
polycarbonate plate with necessary supporting back plate with required
nos. of machine screws, bolts nuts etc., complete on the existing
Supplying and fixing superior quality modular switch mounting
polycarbonate plate with necessary supporting back plate with required
nos. of machine screws, bolts nuts etc., complete on the existing
Supplying and fixing superior quality modular switch mounting
polycarbonate plate with necessary supporting back plate with required
nos. of machine screws, bolts nuts etc., complete on the existing
Supplying and fixing superior quality modular switch mounting
polycarbonate plate with necessary supporting back plate with required
nos. of machine screws, bolts nuts etc., complete on the existing
Supplying and fixing superior quality modular switch mounting
polycarbonate plate with necessary supporting back plate with required
nos. of machine screws, bolts nuts etc., complete on the existing
Supplying and fixing of modular switch & connected accessories on
existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch. ---- With all lead and lift loading and unloading charges,...
Supplying and fixing of modular switch & connected accessories on
existing modular switch plate as per IS 3854 and IS 1293. 6A Two Way Switch. ---- With all lead and lift loading and unloading charges...
Supplying and fixing of modular switch & connected accessories on
existing modular switch plate as per IS 3854 and IS 1293.6A Three Way Socket. ---- With all lead and lift loading and unloading charge...
Supplying and fixing of modular switch & connected accessories on
existing modular switch plate as per IS 3854 and IS 1293.
Stepped Fan Regulator Two Module. ---- With all lead and lift loading and un...
Supplying and fixing of modular switch & connected accessories on
existing modular switch plate as per IS 3854 and IS 1293.
16A One Way Switch. ---- With all lead and lift loading and unloading charge...
Supplying and fixing of modular switch & connected accessories on
existing modular switch plate as per IS 3854 and IS 1293.6A Bell Push ---- With all lead and lift loading and unloading charges, hire ...
Supplying and fixing of modular switch & connected accessories on
existing modular switch plate as per IS 3854 and IS 1293.
32A DP Switch. ---- With all lead and lift loading and unloading charges, hi...
Supplying and fixing superior quality modular switch mounting
polycarbonate plate with necessary supporting back plate with required
nos. of machine screws, bolts nuts etc., complete on the existing
Supplying and fixing of modular switch & connected accessories on
existing modular switch plate as per IS 3854 and IS 1293.
TV/Telephone Socket ---- With all lead and lift loading and unloading charge...
Supplying and fixing of modular switch & connected accessories on
existing modular switch plate as per IS 3854 and IS 1293.
RJ45/I.O Outlet Cat-6 ---- With all lead and lift loading and unloading char...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the
existing wood/panel board using necessary screws, bolts, nuts,
necessary phase separators, handle and wiring complete. Protection of
Supplying & fixing miniature circuit breakers on existing MCB
distribution boards using necessary fixing materials and 'C' Type
curve, indicator ON/OFF, energy cross-3 with Short circuit breaking
Supplying & fixing miniature circuit breakers on existing MCB
distribution boards using necessary fixing materials and 'C' Type
curve, indicator ON/OFF, energy cross-3 with Short circuit breaking
Supplying & fixing miniature circuit breakers on existing MCB
distribution boards using necessary fixing materials and 'C' Type
curve, indicator ON/OFF, energy cross-3 with Short circuit breaking
Supplying and fixing regular MCB distribution boards on wall/ood
board / flush mounting using required clamps, bolts, nuts etc., with
provision for fixing suitable type capacity MCB's single phase/3
Distribution Transformer - 3 Phase,
11kV/433V - Stacked CRGO Core with Oil
as per IS-1180 (Part-1): 2014
100 kVA, Aluminium Wdg, Star 1 (4 Star). ---- With all lead and lift loading and unloading char...
Supply & Fixing LT Distribution Box 100 kVA - Supply 100 kVA - Erection ---- With all lead and lift loading and unloading charges, hire charges of all machineries tools and plants, cost of all labour ...
LT Distribution Box as per IS-13947 Part1&2
LT Distribution Box for 100 kVA DTC with MCCB's
(Dwg No. BESCOM/GM/QS&S/58 Dtd 24.11.2018) ---- With all lead and lift loading and unloading c...
1.1 kV Class Armoured Aluminium Cable with
glands/lugs/ferrules 4C x 95 Sq mm. ---- With all lead and lift loading and unloading charges, hire charges of all machineries tools and plants, cost of all ...
Supplying & Fixing Chemical earthling for grounding. Conduits, IC
cut-outs & other equipments backfill compound which is noncorrosive, thermally conductive, potential to permissible limits,
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
ADM COPY.pdf
Others - ADM COPY • 1.40 MB
ESTIMATE.pdf
Others - ESTIMATE COPY • 0.82 MB
bid document.doc
Tender Document • 2.32 MB
AYUSH NOTIFICATIION.pdf
Others - NOTIFICATION • 1.93 MB
AYUSH CONDITIONS.pdf
Instructions to Tenderers • 1.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .