Repair Renovation of Lecture Hall at Northern Zonal Accountancy Training Institute at Muthi Jammu by way of upgradation and maintenance of electrical works.

Amount

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing of following rating 240/415 Volt's "C" Series miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning .

TPN 63 Amp

SPN 40 Amp

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

4 way (4 + 12), Double door

6 way (4 + 18), Double door

Supply, installation, testing & commissioning of maintenance free copper earthing system with 3 mtrs. Electrode 40 mm dia with minium 2mm thick and does not require manual additional of water. The electrode shall be pre-filled with hygroscopic powder and provided with suitable breathing and leaching ports at the ends. the electrode shall be surrounded by suitable powdered form of BEE MOIST so as to provide maximum contact between the electrode and the compund. The compound should be eco-friendly and having ROHS certification. The earthing pit should be covered with PVC cover.

Providing and laying of 25 x 5 mm copper strip from copper rod up-to the main panel.

Supply, installation, testing & commissioning of GI Electrode Earthing with 50mm dia and 3 meter length, with 3mm thick the electrode should be hot-dip galvinised. The GI Electrode shall be pre-filled with Cristaline Conductive Materila (CCM). The GI electrode shall be surrounded with BEE MOIST compound to provide maximum contact betwen the electrode and compound should be eco-friendly and having ROHS certification GI Electrode Earthing should be maintinance free and does not require regular manual addition of water GI Electrode shall be tested from CPRI. The earthing pit should be covered with PVC cover.

Providing and laying of 25 x 5 mm G.I strip from G.I rod upto the main panel.

Fabrication, supplying, installation testing and commissioning of main pannel made out of 2mm thick M.S sheet, floor mounted, vermin and dust proof, indoor/Outdoor type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors duly painted, with provision of space for fixing of incomer FP MCCB's, and allied accessories etc. as required.

Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required. All MCCB's shall be adjustable type and shall have rotary handle ICU=ICS =100%.

MCCB FP 200 amp. 36 KA

MCCB FP 400 amp. 50 KA

MCCB FP 100 amp. 16 KA

250 A FP ON load Change Over

Aluminium Bus Bar 1000 Amp Set of 4 strips.

Aluminium Bus Bar 500 Amp Set of 4 strips.

CT Set of suitable rating

Indicating Lamp

MCB Strip for 12 Nos. MCB's

Digital MFM class 1.0 depicting VAF METERS and of suitable rating.

SITC of Interactive Flat Panel Display( as per technical specification)

SITC of Cabinet including Controller, Visualizer, UPS, Keyboard and Mouse( as per technical specification)

SITC of Audio Podium Gooseneck microphone,gooseneck lamp,80W amplifier(as per technical specification)

Supply, installation, testing & commissioning of 1.1 KV PVC insulated and PVC sheathed XLPE Power Cable of following size etc. along with providing & fixing of Aluminium thimbles, U Clamps, Insulators etc as required including carriage upto site of work.

50 Sq.mm 3.5 Core Armored

KARAMVEER SINGH KOTWAL GOVT CONTRACTOR

nav bharat enterprises