SPECIAL REPAIRS TO NURSING OFFRS MESS BLDG NO GB 01 AT MILITARY HOSPITAL UNDER GE BELAGAVI.

Amount

Dismantling single layer Mangalore pattern or similar tiles in roofing and removing rubbish off the premises and old unserviceable tiles taken as credit completer. all as specified and as directed.

Description all as per item no 01 here in before but bedded in lime or cement mortar

Dismantling battens for tiles, shingles etc of any size including tilting fillets spaced exc 15 cm and removing rubbish off the premises and old unserviceable timber battens of any description taken as credit complete. all as specified and as directed.

Material and labour for Cement Concrete Eterna Fiery Red (Plain red) tiles of size 420mm x 330mm x 12 mm thick tiles in roofing. Interlocking at side joints laid dry . complete all as specified and as directed . Note : Make of Tile : Pioneer/ Monier

Material and labour for Cement Concrete Rusted Red Ridge Cap of size 330mm x 207mm (thickness 15mm) ,bedded and jointed in CM 1:6 complete all as specified and as directed. Note : Make of Tile : Pioneer/ Monier

Material and labour for Cement Concrete Rusted Red Hip Starter of size 360mm x 210mm (thickness 17mm) ,bedded and jointed in CM 1:6 complete all as specified and as directed. Note : Make of Tile : Pioneer/ Monier

Material and labour for Cement Concrete Rusted Red three way cap of size 351mm x 160mm x 429mm (thickness 15mm) ,bedded and jointed in CM 1:6 complete all as specified and as directed. Note : Make of Tile : Pioneer/ Monier

Material and labour for 4 mm thick Aluminium composit panel comprising of a core containing not less than 70% non combustible mineral filling sandwiched between two skins of 0.5mm thick alluminium alloy PERALUMAN-100 (AIMG1-NS41) complete with all necessary sub-structures, anchors,hindware and fittings to provide a total installation, fixed to existing wooden / steel members with necessory frame work with screwing and scaffolding all as per manufacturers instructions including dismantling of old unserviceable panel of any description and taken as credit complete all as specified and as directed. Note: (i) Measurement shall be taken flat as fixed without any allowance for laps, etc. (ii) Make of Aluminium composit panel : Alstrong/ Aludecor/ Alucobond/ Euroband

Supply and fix Rolled Mild Steel work in tubular trusses, posts,rafters, truss etc including special shaped washers etc. complete using ERW or induction butt welded tubes. conforming to IS 1161-1979 grade St-240 complete all as specified and as directed

Supply and fix Rolled mild steel sections of grade Fe-290(gde E-165 as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates completec all as specified and as directed.

Supply and fixMild steel Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., n exc 10 kg each brackets, conforming to Fe 290 ,Gde-E-165 as in cleats complete all as specified and as directed.

Dismantling timber scantling 40 Sqcm and over in section, in any position for unframed work and removing rubbish off the premises and old unserviceable timber scantlings taken as credit complete. all as specified and as directed.

Material and labour for 2nd class hard wood timber scantling cleans sawn and fixed complete all as specified and as directed .

Description all as per all as per item No 13 here in before but except timber.

Material and labour for Preparing surface of wood and wood based materials, new or old, of any description and girth and treated with one coat of creosote oil complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Material and labour for Double charged Vitrified Ceramic tiles 10 mm thick (square/ rectagular) polished,area of each tile exceeding 0.36 sqm and not exceeding 0.42 sqm in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match over including cement screed bed or bedding layer of mortar in CM 1:6 , 15mm thick complete all as specified and as directed.Note :Make of Vitrified ceramic tile : HR Johnson/Kajaria/Somany .

Material and labour for Vitrified Ceramic tiles 10 mm thick (square/ rectagular) polished,area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match over including cement screed bed or bedding layer of mortar in CM 1:6 , 15mm thick complete all as specified and as directed.Note :Make of Vitrified ceramic tile : HR Johnson/Kajaria/Somany .

Description all as per item No 18 here in before but cut to suitable size in skirting/dado over and including rendering 10 mm thick in CM 1:4 on stone masonry walls as in backing coat of skirting, dado etc complete all as specified and as directed..

Material and labour for Premium quality non skid coloured matt finished ceramic tiles 6 to 7 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigmentsto match shade with joint free non skid tiles over screed bed as bedding layer of mortar 15mm thick for laying floor finishes in CM 1:4 completeall as specified and as directed. Make of Tile :HR Johnson/Khajaria/Naveen

Material and labour for Premium quality glazed ceramic tiles coloured of size 350x250x7 mm /450x300x7 mm thick over vertical surfaces such as skirting , dado etc , set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of tile over and including rendering 10 mm thick in CM 1:4 on stone masonry walls as in backing coat of skirting, dado etc complete all as specified and as directed.Note :Make of Glazed ceramic tile : HR Johnson/Kajaria/Naveen

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid dry and rubbish off the premises complete all as specified and as directed.

Material and labour for Machine pressed precast concrete interlocking colour paver block of 60mm thick any shape and size with glossy finish on top confirming to IS 15658-2006 , with grey cement and pigment ,M-35 grade including dismantling of floor hearth or wall tiling and cement mortar bedding (but not backing)and removing, rubbish off the premises. complete all as specified and as directed.

Material and labour for 50mm thick sand cushion under interlocking paver blocks including watering and consolidation complete all as specified and as directed. Note : Consolidated thickness shall be measured for payment.

Material and labour for Chequered cement concrete tiles of size 30cm x 30cm x 25mm thick, with grey cement and pigments with GLOSSY FINISH set jointed and pointed in neat cement slurry, laid over and including 15mm thick screed bed in cement mortar 1:6 as in pathways, etc. complete all as specified and as directed.

Material and labour for Premium quality Granite slab 20mm thick (table rubbed and polished) machine cut, bedded and jointed with grey cement slurry and pointed with white cement and admixture of pigment to match the shade of granite stone including grinding and polishing in steps,jambs,pillars, window cills ,cooking platforms /wash basin platforms etc complete over screed bed or bedding layer of mortar 20 mm thick for laying of granite slab in CM 1:4. complete all as specified and as directed.

Material and labour for Premium quality Machine cut granite slab in dado or skirting ,steps ,risers ,cladding to pillars etc 20mm thick (table rubbed and polished) laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including grinding and polishing and 10mm thick in cm 1 :4 on fair faces of brick work or concrete surfaces as in backing coat of skirting, dado etc, complete all as specified and as directed .

Material and labour for Machine cut cudappah stone slab 20-25mm thick over 15 mm thick cement mortar 1:4 screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Material and labour for Machine cut kota stone slab flooring 20-25mm thick over 20 mm thick cement screed base in 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed .

Material and labour for Machine cut kota stone slab for skirting 20-25mm thick over 10 mm thick cement screed base in 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed .

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thick (below or above GL) and removal rubbish off the premises complete all as specified and as directed.

Material and labour for 75 mm thick PCC 1:4:8 type D2,(using 40mm graded stone aggregate) as in sub base of flooring including necessary steel form work complete all as specified and as directed.

Material and labour for PCC 1:3:6 ,type C2( using 40mm graded stone aggregate) 75mm thick as in plinth protection / paving and surface finished even and fair including necessary steel form work complete all as specified and as directed.

Material and labour for Providing PCC 1:2:4 ,Type B-1(using 20 mm graded stone aggregate) as in plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs water troughs and the like including weathering, slightly rounded including necessary steel form work complete all as specified and as directed

Material and labour for High pressure steam cured (HPSC) non asbestos fibre cement building board with white/coloured and decorative surface finish 4mm thick in false ceiling fixed with aluminum anodized snap grid of 60x60cm in ceiling with Tee section 35x25x1.25mm, L angle section25x25x1.25mm thick including 2mm dia GI hanging wire including all hanger fittings etc and applying two coats of oil bound distember on ceiling board including dismantling of existing unserviceable false ceiling boards of any description and size alongwith snap grid frame work and taken as credit including making good disturbed wall/ ceiling surfaces complete all as specified and as directed . Note : (i) Make of HPSC Board : EVEREST /ARMSTRONG (ii) Thickness of aluminium anodisation shall be of 15 microns . (iii) Make of aluminium anodised section : Jindal/Indal/Hindalco .

Material and labour for decorative flase ceiling 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. Wire mesh, fixed in ceiling flat or sloping with anodised aluminium snap grid frame work for flase ceiling size of grid size 605 x 605 mm and applying two coats of distemper oil emulsion on surface ceiling including dismantling ceiling and wall boards or insulation board any thickness including cover fillets etc and taken as credit complete all as specified and as directed. Note : (i) Make of Plaster of Paris Board : Birla (ii) Thickness of aluminium anodisation shall be of 15 microns . (iii) Make of aluminium anodised section : Jindal/Indal/Hindalco .(iv) Make of OBD:Asian(Tracter)/Nerolac/Berger

Taking down Chowkhats or frames with shutter of area exc 1.5 sq. m but n exc 4 sq. m each with shutters, making good cill, jambs etc to match with the existing surface (without taking off shutters from the frames) and taken as credit complete all as specified and directed.

Taking down Chowkhats or frames with shutter not exc. 1.5 sq. m each with shutters, making good cill, jambs etc to match with the existing surface (without taking off shutters from the frames) and taken as credit complete all as specified and directed.

Taking down shutters of any description of size n exc 1sqm each and taken as credit complete all as specified and directed

Description all as per all as per item No 39 here in before but size exc 1 sqm and not exc 2.0 sqm each

Taking down and Refixing existing shutters of any description of size exc 1sqm and n exc 2 Sqm complete all as specified and directed

Supply and fix Second class hard wood plain solid straight chowkat or frame rebated on the solid, wrought, framed rounded or chamfered put together with glue pinned at joints fixed in position complete all as specified and as directed.

Supply and fix Factory made 35 mm thick second class hard wood, Plain framed, panelled shutter with lock rail and panel of 12mm thick veneered particle board ,medium density with commercial face veneers on both faces with size of rails and stiles sizes of members of shutters as specified in SSR Part I, Section 8. Clause 8.24 (a) and fitted to chowkats complete all as specified and as directed.

Material and labour for Factory made 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides covered with deco rative face veneer with lipping/frame to match complete all as specified and as directed .

Material and labour for Factory made 35 mm thick 2nd class hard wood glazed/ gauged shutters, open rebated and prepared to receive glass, gauze, etc. (divided into square with plain, chamfered or rounded, mitred and rebated sash bars any numbers), edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a) and fitted to chowkats complete all as specified and as directed.

Supply and fix in repair Stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tack or galvanised wire staples complete all as specified and as directed .

Supply and fix Aluminium anodised door shutter, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, and locking arrangement anodised aluminum snap beadingscrews etc. complete all as specified and as directed. Note :(i) Make of Aluminium section : Jindal/Hindalco/Indal (ii) Minimum thickness of anodisation shall be of 15 Microns

Material and labour for Powder coated aluminium frame work as in doors, windows, ventilators and partitions with one or more rebates using standard aluminium extruded sections including provision of joining cleats ,glazing clips, hinges, handles, etc.compete all as specified and as directed. Notes: (i) All the aluminium sections provided under this item shall be measured and converted into weight for payment with the designated unit weight mentioned in the manufacturer's catalogue for the corresponding aluminium sections/ fittings. (ii) The rate quoted shall be deemed to include necessary grouting/ embedding of the aluminium frames/ supports into floors/ walls and making good the disturbed surfaces to match with the existing surfaces and provision of necessary rubber gaskets. iii) Particle board/ glass panels wherever required shall be measured and paid separately. (iv) Make of Aluminium section : Jindal/Hindalco/Indal (v) Minimum thickness of Powder coating shall be of 50 Microns

Material and labour for 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 Sqm in each pane complete all as specified and as directed.Note :Make of Glass :saint Gobain/Modi Guard/Gold Fish

Supply and fix in repairs Mild steel framed work such as grills, gratings etc. With ends of bar shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed labusters, walk ways, railings, framewok of water tanks and similar work conforming to FE 290. Gde-E-165complete all as specified and as directed.

Supply and fix Aluminium sliding windows (triple track), fabricated to required size with powder coated aluminium sections, with bottom track size 92 x31.75 x1.6 mm, side & top frame size 92 x 31.75 x 1.4 mm, top and bottom shutter rail of size 39 x17 x1.4 mm, outer style of size 39 x 17 x1.4 mm, interlock style of size 39 x27 x1.4 mm, including provision of 5mm sheet glass ordinary quality and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.4 mm for panels including sealent compound throughout edges, provision of all hardware fittings such as handles, locking arrangeemnts, rubber gaskets, rollers, spring catchers etc. complete all as specified and as directed. Note:(i) Each window shall be provided with 2 glazed shutters + 1 wire mesh shutter. (ii) Thickness of aluminium anodisation shall be of 15 microns . (iii) Make of aluminium anodised section : Jindal/Indal/Hindalco . (iv ) Make of Stainless steel wire mesh : (v) Make of Glass : Saint gobain/modi Guard/Gold fish

Material and labouir for 18mm thick decorative prelaminated particle board, interior grade, prelaminated on one side with decorative choice lamination and on the other side with white lamination, as in cub board shelves/ cabinet works fixed with necessary fixing arrangement including magnets , screws etc fixed in repairs complete all as specified and as directed.Note:Make:Kitply/Green Ply/Novopan

Material and labour for 18mm wide x 6mm thick external teak wood lipping around edges of particle board/ plywood including french polishing, fixed in repairs complete all as specified and as directed.

Supply and fix magnetic catch complete all as specified and as directed.(ISI MARKED)

Supply and fix 40mm dia cupboard knobs fixed with nut, screw and washer of brass, polished, complete all as specified and as directed.(ISI MARKED)

Supply and fix in repair 4mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and as directed.Note :Make of glass : Saint Gobain/Modi Guard/Gold Fish

Supply and fix Mild steel butt hinges 100 mm in size, medium weight, cold rolled complete all as specified and asdirected . (ISI MARKED)

Supply and fix Stainless steel butt hinges 100 mm in size, medium weight complete all as specified and as directed . (ISI MARKED)

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 100mm long complete all as specified and as directed. Make :Crown/Classic/Adarsh

Supply and fix Aluminium handle, 'D' type, anodised 100 mm in sizecomplete all as specified and as directed. Make :Crown/Classic/Adarsh

Supply and fix Aluminium alloy anodised sliding door bolt 300mm long with hasp and staple (Bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as specified and as directed. Note : Make of Aluminium anodised sliding door bolt : Classic/Crown/Adarsh . .(ISI MARKED)

Supply and fix in repairs Brass skeleton tower bolt of 150 mm length with cast brass plate and staples and rolled or drawn brass bolt complete all as specified and as directed. .(ISI MARKED)

Supply and fix in repairs Brass, sliding door bolt of 200 mm length with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed . .(ISI MARKED)

Supply and fix in repairs,Harrison rail , mild steel,chromium plated powder curtain rods, fancy type, 25mm dia including brackets ,stops and rollers with end designer caps complete all as specified and as directed.(ISI MARKED)

Taking up or down steel tubing and connections 15mm dia bore of pipe and taken as credit complete all as specified and as directed.

Description all as per item no :65 here in before but 25 mm dia bore .

Supplyind and laying CPVC pipes 16 mm outer dia , SDR 11 and Plain CPVC SDR 11 Fittings on walls/ceiling or laying in floors including taking down old unserviceable pipe of any description and taken as credit complete all as specified and as directed.Note : Make : Ashirwad/Astral

Supplyind and laying CPVC pipes 25 mm outer dia , SDR 11 and Plain CPVC SDR 11 Fittings on walls/ceiling or laying in floors including taking down old unserviceable pipe of any description and taken as credit complete all as specified and as directed.Note : Make : Ashirwad/Astral

Supply and fix Vitreous china wash hand basin white flat back size 550x400mm, including CI brackets, including PVC waste pipe, PVC connection 600mm long and cutting for and pinning in ends of CI brackets or erecting stands etc complete all as specified and as directed.MAKE: CERA/JOHNSON/JAQUAR

Supply and fix in repair vitreous china wash down water closet pan (pedestal pattern), white, including 'P' or 'S' trap, plastic water closet seat of any colour as approved by GE, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, fixing bolts etc, connecting to drain pipe and 32 mm dia PVC flush pipe etc and connection to drain (or out going pipe) and to flushing pipe, anti syphonage pipes etc.complete all as specified and as directed..MAKE: CERA/JOHNSON/JAQUAR

Supply and fix Syphonic action type low level PVC flushing cistern, 10 litres capacity, white, with inlet, ball valve, float, handle and flush pipe including brackets and connections to pipe .complete all as specified and as directed. Note : Make :Parryware (Slim Line ) /CERA/ Hindware

Supply and fix PVC connections 15 mm size with PTMT nuts 600mm long completeall as specified and as directed. Note :Make : Prayag /M/S Shakthi Industries

Supply and fix in repairs Brass chromium plated shower rose swivel type 125mm size including provision of 195mm long brass CP shower arm suitable for fixing with 15mm bore pipe complete all as specified and as directed.

Supply and fix in repairs stainless steel Towel rail, 'D' type, 600mm long between flanges with and including stainless steel screws and wooden/ plastic cleats complete all as specified and as directed.

Supply and fix Chromium plated Pillar taps fancy type , cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. Make: Prayag ESS ESS/ ARK.

Supply and fix in repairs 15mm bore Stop valve fancy type brass CP, with long shank and cup (concealed type), screwed down high pressure, screwed both ends for iron pipe for unions complete all as specified and as directed.Make: Prayag ESS ESS/ ARK.

Supply and fix in repairs 15mm bore stop valve fancy type brass CP, screwed down high pressure, screwed both ends for iron pipe or for unions complete all as specified and as directed.Make: Prayag ESS ESS/ ARK.

Supply and fix Health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed.Make: Prayag ESS ESS/ ARK.

Supply and fix in repairs 15 mm bore Bib tap, long body, brass chromium plated, fancy type with wall flange and crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed.Make: Prayag ESS ESS/ ARK.

Supply and fix in repairs 15mm bore Brass CP 3 way mixer tap, fancy type for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.Make: Prayag ESS ESS/ ARK.

Supply and fix in repairs 15 mm bore 2 way Bib tap, long body, brass chromium plated, fancy type, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed.Make: Prayag ESS ESS/ ARK.

Supply and fix Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. Make:Jaquar/CERA/Johnson

Supply and fix in repair 1mm thick stainless steel sink, overall size 495x420mm, bowl size 410x330x160mm, with plug, washers & wastes including bedding in cement mortar, fixing cantilever brackets and connecting union to pipe complete all as specified and as directed.Note:Make of SS sink:Nirali/Blue Star/Joyna

Demolition of brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, etc,and removal of debris off the premises complete all as specified and as directed.

Material and labour for Precast concrete block masnory withPCC 1:3:6 type C1 using 20 mm graded aggregate with solid block exc 10cm in width and set in CM 1:6 including demolition of existing pre cast concrete articles of any description and removal of rubbish off the premises.complete all as specified and as directed.

Material and labour for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or PCC block masonry or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Taking down cement plaster on brick or stone wall or ceiling concrete etc. including racking out joints hacking for key scrubbing down with water etc., all as specified and directed.

Material and labour for Rendering 25mm thick in cement mortar 1:6 on stone masonry surfaces and surface finished even and smooth without using extra cement including taking down old cement plaster on brick or stone walls built in cement mortar and removal of rubbish off the premises.complete all as specified and as directed.

Material and labour for Rendering 15mm thick in cement mortar 1:6 on fair faces of stone masonry and surface finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Rendering 5mm thick in cement mortar 1:4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on stone masonry surfaces and surface finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately.

Material and labour for Preparation of newly plastered surfaces of wall ,cornices,pillasters etc and applying two coats of oil bound distemper(Acrylic distember washable) over a preparatory coat of chalk whitening on plastered surface complete all as specified and as directed.

Material and Labour for Applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over th new surfaces etc complete all as specified and as directed.

Material and labour for Complete removal of existing treatment on wall with wire brushing ,scrapping down smoke soot ,mould, moss and efflorescent salts, trading oil and greasy spots and applying two coats ofoil bound distemper(Acrylic distember washable) over a coat of primer with alkali resistant priming paint over a preparatory coat of 1 mm thick wall care putty on wall complete all as specified and as directed

Material and labour for Complete removal of existing treatment on wall with wire brushing ,scrapping down smoke soot ,mould, moss and efflorescent salts, trading oil and greasy spots and applying two coats of exterior acrylic emulsion paint (Asian Paint -APEX Brand) over a coat of primer with alkali resistant priming paint on wall complete all as specified and as directed

Material and labour for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Material and labour for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for Preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed..

Material and labour for Complete removal of existing colour treatment from old wooden surfaces including grinding on wooden surfaces and applying French polishing on surfaces in order to make it smooth, shiny and resistant to moisture and abrasion of any description, width or girth including cleaning and preparing the surface and applying a coat of wood filler on old work with two or more coats complete all as specified and as directed..

Demolition and breaking up drain pipes (Salt glazed ware,AC or Reinfoced concrete ) set in cement mortar including removal of debris off the premises complete all as specified and as directed..

Supply and fix 110mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. Note :Make of UPVC Pipe :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 75 mm bore UPVC (SWR) pipes single socketed in any length with solvent cement joints, laid in trenches or in floors complete all as specified and as directed. Note :Make of UPVC Pipe :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 75 mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. Note :Make of UPVC Pipe :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 110mm bore UPVC (SWR) pipes single socketed in any length with solvent cement joints, laid in trenches or in floors complete all as specified and as directed. Note :Make of UPVC Pipe :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 75mm bore UPVC (SWR) bend any radius with access door complete all as specified and as directed. Note :Make of UPVC Bend :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 110 mm bore UPVC (SWR) bend any radius with access door complete all as specified and as directed. Note :Make of UPVC Bend :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 110mm bore UPVC (SWR) branch piece, single Y, equal or unequal with access door complete all as specified and as directed. Note :Make of UPVC branch piece :Finolex/Supreme/Prince (ISI MARKED).

Supply and fix 110mm bore UPVC (SWR) vent cowl complete all as specified and as directed. Note :Make of UPVC Cowl :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix PVC (SWR) floor trap plain with grating including jointing with solvent cement of 75mm dia outlet complete all as specified and as directed. Note :Make of PVC floor trap :Finolex/Supreme/Prince (ISI MARKED).

Supply and fix UPVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and as directed. Note :Make of UPVC Gully trap :Finolex/Supreme/Prince (ISI MARKED)

Taking down eaves gutters and rainwater pipes (any size or pattern) , including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

Supply and fix PVC (SWR) eaves gutter Half Square/Half Round profile 150mm bore including pipe accessories PVC holder bats , bolts nuts etc complete all as specified and as directed.Note : Make of PVC eaves gutter :Finolex/Supreme/Prince

Supply, Fabrication and installation of 12 mm thick toughened glass railing of height 1200 mm complete using SS grade 304 top handrail 65 mm dia,Anchor bracket aluminium U channel mechanism including cover profile and silicon grip alongwith all necessary handwares and providing all fixing arrangements along with fixing accessoriescomplete all as specified and as directed.Note : Make Toughened Glass:Saint Gobain/Modi Guard/Gold Fish

Dismantling of old unserviceable submain wiring of aluminium conductor cable of siz 2.5 and 4 sq.mm and taken as credit complete all as specified and as directed.

Material and labour for Point wiring with 1.5 Sqmm size single core PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded cable for phase and neutral drawn through in and including non metallic rigid PVC conduit of 20 mm dia with all necessary fittings and provision of one run of Green coloured PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including provision of suitable size of modular PVC surface box fixing on wall with and white colour cover plates for mounting modular type switches, sockets, fan regulators, bell pushes etc. for one light point controlled by one switch 1 way complete all as specified and as directed.NOTE. (i) Make of PVC cable :Finolex/Polycab/Havells (ii) Make of PVC conduit : Avon Plast/Presto plast /Garware

Description all as per item No. 115 here in before but for one fan point controlled by one switch and regulator.

Description all as per item No. 115 here in before but for one call bell point controlled by one bell push.

Description all as per item No. 115 here in before but for one exhaust fan controlled by one switch.

Description all as per item No. 115 here in before but for one light point controlled by two 2 way switch.

Description all as per item No. 115here in before but for one 05 amps socket outlet on independent board.

Description all as per item No. 115 here in before but for one 05 Amps socket outlet on the same board with other switches.

Description all as per item No 115 here in before but complete with 1100volt grade FRLS PVC insulated unsheathed multistranded wire with 2.5 sqmm copper cable ,single core and one run of FRLS PVC insulated unsheathed multistranded wire with 2.5 sqmm copper cable ,single core of upto earth dolly for 15 Amps socket outlet independent .

Supply and fix Modular switch type 6 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Indo Asian

Supply and fix Modular switch type 6 Amps flush button 230 volts AC two way, complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Indo Asian

Supply and fix Modular bell push flush type 230V AC 6 Amps, 1 modulecomplete all as specified and as directed.Make : Anchor (Roma) /Legrand/Indo Asian

Supply and fix in repairs Modular socket outlet 6 Amps 2/3 pin combined flush type multipurpose 2 module, complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Indo Asian

Supply and fix in repairs Modular socket outlet 6/16 Amps 2/3 pin combined flush type multipurpose 2 module complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Indo Asian

Supply and fix in repairs Modular switch 16 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make -Anchor(Roma)/Havells/Indoasian

Supply and fix call bell, ding dong,230V AC supply complete all as specified and as directed. Make : Anchor/ Cona / Rider

Supply and fix in repairs PVC /Poly carbonate Ceiling rose surface bakelite of size 63.5 x 20 mm, three terminals complete all as specified and as directed . Make : Anchor/ Cona / Havells

Supply and fix in repairs Modular electronic type fan regulator 230 V , 120 watt step type, 2 module complete all as specified and as directed . Make : Anchor/Legrand/Rider

Material and labour for Sub main wiring with 2 runs of single coreFRLS PVC insulated unsheathed multi-stranded copper conductor cables of size 4.00 Sq mm drawn through in and including PVC conduit in ivory/Grey/white colour ,medium grade with all necessary fittings fixed in wall/ceiling and Provn of one run of 4.00 sqmm FRLS PVC insulated unsheathed multistranded copper conductor double core cable for earth continuity and connected to common earth dolly complete all as specified and as directed. NOTE:(i) Two runs of 4.00sqmm and one run of 4.00 sqmm and one run of PVC conduit will be measured as one unit. (ii) Make of PVC cable :Finolex/Polycab/Havells (iii) Make of PVC conduit : Avon Plast/Presto plast /Garware

Material and labour for Sub main wiring with 2 runs of single coreFRLS PVC insulated unsheathed multi-stranded copper conductor cables of size 6.00 Sq mm drawn through in and including PVC conduit in ivory/Grey/white colour ,medium grade with all necessary fittings fixed in wall/ceiling and Provn of one run of 6.00 sqmm FRLS PVC insulated unsheathed multistranded copper conductor double core cable for earth continuity and connected to common earth dolly complete all as specified and as directed. NOTE:(i) Two runs of 6.00sqmm and one run of 6.00 sqmm and one run of PVC conduit will be measured as one unit. (ii) Make of PVC cable :Finolex/Polycab/Havells (iii) Make of PVC conduit : Avon Plast/Presto plast /Garware

Supply and fix in repair LED BATTEN fitting type 1x 20 watt indoor decorative PC housing T5 LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed . Note: Make :Cat part no :-LUMILINENXTBS20WLED865SPCWH OF HAVELLS OR EQUIVALENT IN WIPRO / CROMPTON

Supply and fix in repair LED BATTEN fitting type 1x 10 watt indoor decorative PC housing T5 LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed . Note: Make :Cat part no :-LUMILINENXTBS10WLED865SPCWH OF HAVELLS OR EQUIVALENT IN WIPRO / CROMPTON

Supply and fix in repair LED BATTEN tube light fitting type 5 watt indoor decorative PC housing LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed . Note: Make :Cat part no :-LHEXBLP71N1W005 OF HAVELLS OR EQUIVALENT IN WIPRO / CROMPTON

Supply and fix wall light lamp alongwith all accessories connecting up with twin core twisted cable lamp from point to lamp 20 watt LED Oval shape Wall mounted light of Model:-Philiphs 31425 20-watts E27 LED complete all as specified and as directed

Supply and fix in repair LED Picture light 7 watts indoor type corded-electric indoor type metal synthetic model type of size 355 x 180 x 95 mm 3 k ,wall mounted energy efficient of Model in Philips 31402 LED picture light or equivalent in Wipro/CG including connecting up with twin core twisted flexible FRLS PVC copper cable of suitable size from point to lamp and fixing the fitting on suitable size of PVC / wooden round block complete all as specified and as directed .

Supply and fix in repair LED Spot light round type 5 watts grey/metal synthetic including connecting up with twin core twisted flexible FRLS PVC copper cable of suitable size from point to lamp and fixing the fitting on suitable size of PVC / wooden round block complete all as specified and as directed . Note : Make : Havells cat part no OR equivalent in CG/Philips

Supply and fix in repair LED luminaire of size 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up to driver with FRLS PVC three core flexible copper conductor cable of suitable size complete all as specified and as directed. Note : Make :Havells cat part no OR equivalent in CG/Philips

Supply and fix in repair LED street light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. Note : Make : Cat part no :-ENDURASUNDOWNSL25WLED765PASYBOPC OF HAVELLS OR EQUIVALENT IN WIPRO / CROMPTON

Supply and fix in repair Round shaped 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling includingconnecting up driver with FRLS PVC three core flexible copper conductor cable of suitable size complete all as specified and as directed. Note : Make : Havells cat part no OR equivalent in CG/Philips

Supply and fix in repairs Energy saving surface mounted, decorative oval bulk head edge-lit LED luminaire 10W, comprising of high brightness LEDs. comprising of high brightness LEDs complete with all accessories internally pre wired complete including provision of 10 Watts high brightness LEDs 6000K, suitable size wooden board with sunmica top and connecting up light fitting with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector block complete all as specified and directed. Make: Havells ENDURA RUGBY NEO N- IP65 or equivalent in CG/ Philips/ Wipro

Supply and fix Ceiling fan complete with blades, down rods of suitable length of 20 mm dia medium grade GI pipe from top to bottom, and accessories, 230 V, 1200 mm sweep, Minimum air delivery 210 CFM with service value 6.00 BEE 5 star rated with brush direct current motor (BLDC) including taking down existing unserviceable ceiling fan from the location and setting aside for fixing /deposting to MES store yard complete all as specifed and as directed . Note : Make:-Bajaj /Crompton/Orient

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm with necessary grouting and fixing arrangements and provision of 3 core FRLS PVC flexible copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of exhaust fan complete all as specified and directed .. Note : (i)Make:-Almonard /Crompton/Orient (ii) Old exhaust fan will be deposited in MES store yard.

Supply and fix Exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers ,heavy duty , copper winding with necessary grouting and fixing arrangements and provision of 3 core flexible FRLS PVC copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of exhaust fan complete all as specified and as directed. Note : Make:-Almonard /Crompton/Orient

Supply and fix Wall mounting fan 230 V single phase 300 mm sweep with all accessories fixed to wall with all necessary brackets ,bolts nuts etc including testing and making good disturbed surfaces complete all as specified and as directed . Note : Make:-Almonard /Crompton/Orient

Taking down existing MCB DB alongwith MCBs and old wooden boards and making good to disturbed surfaces.to match with the existing surface and old unserviceable MCB DB taken as credit complete all as specified and as directed.

Supply and fix Factory made epoxy powder coated distribution board double door TPN 8 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one FP MCCB 100 Amps as incomer and SP/TP MCBs (or any combination of SP/TP MCBs ) outgoings complete all as specified and as directed.Note :Make :L&T/Indo Asian/Legrand

Supply and fix in replacement MCCB,4 pole ,125 Amps , 16 KA , C Series current rating conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and as directed..Note :Make :Indo Asian/L&T/Siemen

Supply and fix Factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.0 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 10 SP MCBs as outgoings complete all as specified & directed Make -:Indo Asian/L&T/Siemen

Supply and fix Factory made epoxy powder coated distribution board SPN 4 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.0 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 6 SP MCBs as outgoings complete all as specified and directed .Note :Make :Indo Asian/L&T/Siemen

Supply and fix amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 AMP following poles and current carrying capacity in the MCB DB complete all as specified and directed .Note :Make :Indo Asian/L&T/Siemen

Supply and fix MCB SP 240 Volt of capacity 6 to 40 Amps 10 KA‘C’ curve complete all as specified and as directed. .Note :Make :Indo Asian/L&T/Siemen

Material and labour for Earthing complete with galvanised earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground in vertical position, earth pit not less than 2.25 Metre deep below ground level with top edge of the plate not less than 1.5 Metre below ground level connetced with galvanised iron earth lead wire of size 4 mm dia(Upto 7.50 metre length) by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle

made of 10mm dia) including necessary excavation & earth work, returning filling and removal of surplus earth upto a distance not exceeding 50 Mtr etc all as shown on electrical plate No. 3 of MES Schedule Part-I complete to obtain less than 1 Ohm earth resistance, fiaxed in repairs complete all as specified and as directed.

Supply, lay and test cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of Cross sectional area 35 Sqmm, 3.5 core laid in trenches or fixed to wall / passing through pipe / pole compete all as specified and as directed. Note : (i) Excavation & earth work, Brick protection and sand cushining shall be measured and paid for separately under relevent items in this BOQ (ii) Make of XLPE Cable : Gloster/Polycab/CCI

Supply, lay and test cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of Cross sectional area 10 Sqmm, 2.0 core laid in trenches or fixed to wall / passing through pipe / pole compete all as specified and as directed. Note : (i) Excavation & earth work, Brick protection and sand cushining shall be measured and paid for separately under relevent items in this BOQ (ii) Make of XLPE Cable : Gloster/Polycab/CCI

Excavation in trenches n. exc. 1.5m wide and n. exc. 1.5m depth in any type of soil up to top of drain pipe,laying of cable etc complete all as specified and as directed.

Material and labour for Double wall corrugated HDPE pipes of ISI marked 63 mm outer dia and 50 mm inner dia as in cable protection fixed to poles with necessary suitable MS clamps, bolts, nuts, washers or laid in trenches/ roads crossings etc complete. all as specified and directed.Note :Make : Rex/ Ketron/Duraline

Returning, filling in including spreading levelling and well ramming in layers n exc 25cm thick with soil obtained from excavation from any type of soil complete. all as specified and directed

Removing of excavated material/surplus soil n exc 50m and depositing where directed at a level n exc 1.5m above the starting point for any type of soils complete. all as specified and directed

Supply and fix Galvanised iron water tube 'light grade' of size 25 mm bore with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs etc.and clips, wall hooks etc. laid in trenches, on ground or fixing on wall and testing complete all as specified and directed.Note:Make of GI Pipe :TATA/JINDAL/ZENITH (ISI MARKED)

Taking up or down steel tubing of size upto 40 mm bore and connections and taken as credit complete all as specified and as directed.

Supply and fix Galvanised iron water tube 'Medium grade' of size 40 mm bore with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs etc.and clips, wall hooks etc. laid in trenches, on ground or fixing on wall and testing complete all as specified and directed.Note:Make of GI Pipe :TATA/JINDAL/ZENITH (ISI MARKED)

Supply and fix Galvanised iron water tube 'Medium grade' of size 25 mm bore with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs etc.and clips, wall hooks etc. laid in trenches, on ground or fixing on wall and testing complete all as specified and directed.Note:Make of GI Pipe :TATA/JINDAL/ZENITH (ISI MARKED)

Material and labour for 1000 litres capacity Rotational moulded polyethylene (HDPE) water storage tanks, 'ISI' marked, cylindrical, vertical with closed top conforming to IS 12701-1989 having two layers wall construction with manhole lid and suitable locking arrangement including making holes for inlet, outlet and over flow pipes, hoisted, fixed in position and testing complete and demolition/taking down of existing RCC/PVC water storage tank of any description from the existing staging/ Building after disconnecting and dismantling of all existing pipe line connections carefully and taken as credit complete all as specified and as directed.Note :Make of HDPE Tank :Sintex/Polycon /Infra (ISI MARKED)

Supply and fix 25 mm dia PTMT ball valve high pressure (Minimum weight :210 gms) with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed.Make : Prayag/M/S Shakthi Industries

Supply and fix 25 mm bore gun metal gate valve heavy duty ISI marked with iron wheel head screwed both ends to iron pipes and fixed complete all as specified and as directed. Note :Make :Leader/Zoloto/Kartar

Supply and fix 40 mm bore gun metal gate valve heavy duty ISI marked with iron wheel head screwed both ends to iron pipes and fixed complete all as specified and as directed. Note :Make :Leader/Zoloto/Kartar

Material and labour for Construction of valve chamber of internal size 900 x 900 x 900mm suitable for 150 mm dia sluice valve including necessary earth work excavation PCC 1:4:8 in foundation type D-2 using 40mm graded stone aggregate, brick wall in CM 1:4, PCC 1:2:4 type B-1 for coping, 15mm thick rendering in CM 1:4 including provision of MS sheet cover 3.0mm thick with MS angle frame 40 x 40 x 3mm all round and at diagonals of size 40 x 40 x 6mm and also MS plate welded to MS angle, embedded in concrete with suitable hinges and locking arrangements, including two coats of synthetic enamel paint over a coat of red oxide primer necessary excavation earth work etc complete all as specified and as directed.

Sadhana Constructions & suppliers (BID ID -3139808)

M/s.Y.N.PATIL (BID ID -3139337)

M/S SAMARTH CONSTRUCTIONS (BID ID -3138060)

SHREESAMARTH CONSTRUCTION (BID ID -3137845)

M/s. VIJAY ELECTRICALS (BID ID -3139467)

M/s. N D KALING (BID ID -3137999)

M/S MAHADEV M PATIL (BID ID -3138078)