Construction of Science and Technology Block A phase II at Zakura Campus.

Amount

EARTHWORK

Earthwork excavation in all type of soil, murrum, after clearing of vegetation and debris (to be segregated and kept separate from the reusable earth) including loading, carting away from the site, unloading and dozing at disposal yard etc. complete as directed by EIC. FOR FGL to 2M depth. Rate shall include for excavation and disposal of earth within the campus as and where required and as directed by EIC either by manual or by mechanical means, including loading & unloading, necessary equipments, tools & plants, dressing to proper level and grade as required, dumping the soil within the campus on the ground , taking necessary precautions to prevent any spillages or spoiling of the campus roads during removal & transporting the soil, all consumables including removal of soil excavated extra by the contractor for providing shoring & strutting, extra working space as required for any kind of works etc complete, as directed. (LEAD UP TO 1 KM ) Rate shall includes to prevent sliding of sides of foundation , the contractor shall provide effective and sufficient protection such as but not limited to shoring or any other method. The rate shall includes providing Staging, timbering, strutting etc

BACK FILLING WITH EARTH BROUGHT FROM OUTSIDE Providing and filling in plinth with approved quality earth etc. including transporting, loading, unloading and compacting in layers of 200 mm thickness including watering, compacting by ramming/ rolling, leveling to specified slopes, dressing and consolidation etc at optimum moisture content with mechanical rollers/rammers etc.(compacted to90% modified proctor density) complete as per specification and as directed . With approved quality earth brought from outside sources

Back filling with Granular sub base (GSB) Supplying from approved source and laying graded Granular Sub base of speciefied and approved geotechinical parameters in embankment or depression in specifed layers.

CEMENT CONCRETE WORKS

Providing and laying plain cement concrete M7.5 (1:4:8) at plinth level & upto 5m below plinth level in foundations, drains, fillings, non-suspended floors, pavements, ramps, etc including shuttering, tamping, ramming, vibrating, curing, shuttering, etc all as specified in any shape, position, thickness and finishing the top surface rough or smooth or as specified and directed with 40mm and down size graded crushed stone aggregates with minimum cement content and maximum water cement ratio as per IS:456-latest revision.

Providing and laying plain cement concrete M10(1:3:6) at plinth level & upto 5m below plinth level in foundations, drains, fillings, non-suspended floors, pavements, ramps, etc including shuttering, tamping, ramming, vibrating, curing, shuttering, etc all as specified in any shape, position, thickness and finishing the top surface rough or smooth or as specified and directed with 40mm and down size graded crushed stone aggregates with minimum cement content and maximum water cement ratio as per IS:456-latest revision.

Providing and laying in position ready mix concrete M-25 (1:1.5:3) in RCC including proper vibration and curing including broom finish if required but excluding cost of formwork and reinforcement etc all complete as per drawing, specification and direction of EIC. With contractor's RMC plant (including transit mixers, concrete pump /crane). For concreting all Desired height (including cost on account of cube tests and quality control)

Providing and laying in position ready mix concrete M-30 in RCC for all types of structures including proper vibration and curing but excluding cost of formwork and reinforcement etc all complete as per drawing, specification and direction of EIC. With contractor's common Batching/RMC plant. For concreting below FGL (including cost on account of cube tests and quality control)

FORMWORK

Providing and fixing to correct level, line plumb, vertical, plain formwork with contractor's own material in all shapes made of plywood/ms sheets for RCC/PCC works including necessary strutting, scaffolding, bracing etc. Leaving necessary recesses, opening chamfers etc. Keeping the same in position during concreting and removing after the specified period, all complete as per specification and direction of EIC. for all heights

Providing and fixing to correct level, line plumb, vertical, plain formwork for Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth andstring courses fillets etc with contractor's own material in all shapes made of plywood/ms sheets for RCC/PCC works including necessary strutting, scaffolding, bracing etc. Leaving necessary recesses, opening chamfers etc. Keeping the same in position during concreting and removing after the specified period, all complete as per specification and direction of EIC. for work at all levels./desired height.

REINFORCEMENT

Supplying, cutting, bending to shape, fabricating, fixing and tying in position TMT Reinforcement Steel of Fe 500 grade at all levels and location as shown in the structural drawing. * The reinforcement shall be of an approved brand viz TATA / SAIL / VIZAG or equivalent and the rate shall include cost of supply & tying reinforcement with 18 gauge GI binding wire in the reinforcement rate. The unit rate shall also include cost of all related operations viz inputs of labour, materials, tools and tackle, equipment, machinery etc complete. * For measurement purpose actual quantity for reinforcement bars provided and authentic laps OR couplers provided shall be considered.

MASONRY WORK

STEEL WORK

Structural Steel Providing, cutting, fabricating, drilling, erecting, riveted, bolted, welding connections, hoisting & placing in position MS structural steel composed of channels, beams, tubular hollow sections, joists, angles, plates, braces, foundation bolt, anchor bolts for supporting system including cost of all materials, consumables, labour, applying one coat of red oxide primer, one coat of anti corrosive paint. Complete in all lead and lifts as per drawings and specifications and/or as directed by EIC. upto desired height in trusses, purlins, rafters, stair cases wherever required. details as per structural drawing for any span)

Stainless steel railing Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels plates etc., including weilding, grinding, buffing, polishing and making curvature (whereever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist, slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel member shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

SS Posts MS Grills / Railing

FLOORING/CLADDING WORKS

Vitrified Tiles Providing & LAYING OF ANTISKID VITRIFIED TILE (600x600) WITH 3mm SPACERS Laying VitrifiedTiles for flooring over 20 mm thk cement mortar in approved pattern as per drawings or as directed by EIC, including cleaning and preparing the surface for bedding, spreading neat cement slurry by using minimum cement of about 2Kg/SQM prior to bedding and 4.5 Kg/SQM over bedding. Joints shall be well cleaned and grouted with matching colour approved quality ready made polymer ( Bal Grout ) based grout, including curing, cleaning, etc complete. Base rate of tile Rs.70 per sft of Kajaria , Asian , Nitco make.

Skirting Providing and Fixing of 100mm high Vitrified Tile Skirting ( Tiles sameas flooring Tiles ) , projecting not more than 8mm from the wallplaster line fixed in CM 1:3. The tiles shall be fully buttered withcement paste on the back. The work shall include cleaning of joints, curing, cleaning as per detailed specification etc. complete. (Kajaria , Asian , Nitco make).

Ceramic Tile Dado (Base rate of tile Rs.35 per Sft) Providing and fixing Tiles in Cladding /Dado of approved shade, sizeand pattern on masonry walls including border fixed in pattern asapproved by EIC and fixed with rich cement slurry over abacking coatplaster of 12mm thk. Cement mortar 1:3 and grouted with app.shade grout (Bal Grout ) Rate to include, Tile cutting , cleaning ofjoints, finishingjunction of plaster , curing etc. complete and asper drawing. (Kajaria , Asian , Nitco make).

Granite Flooring Providing and laying flooring using 18mm thick Granite of approved size, pattern laid over 20mmthick bed CM 1:4 with tile grouting for flooring, using cement slurry below slabs for packing,asper architectural design, drawing and specifications, including joint filling with approved qualityand colour cement to match the shade of Granite.The work shall include cost of materials,wastage, labour, all lead and lift at all levels, loading and unloading, transportation,cutting, curingetc. and all other incidental charges etc.complete and as directed by EIC.

Granite Tile skirting Providing and laying skirting using 10mm thick Granite Tile of 100mm high, laid over 20mmthick CM 1:4 with tile grouting for skirting, using cement slurry,asper architectural design, drawing and specifications, including joint filling with approved qualityand colour cement to match the shade of Granite.The work shall include cost of materials,wastage, labour, all lead and lift at all levels, loading and unloading, transportation,cutting, curingetc. and all other incidental charges etc.complete and as directed by EIC.

Cement concrete flooring 1:2:4 (1Cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry but excluding cost of nosing of steps etc. complete. 50 mm thick 20mm nominal size stone aggregate (crushed)

Brick Bat Cushioning Providing and laying brick bat cushioning over existing RCC slab with average thickness of 75mm thick and a overlay of 25mm thick PCC with 10mm nominal size aggregate of M 7.5 grade.

Providing and laying mud flooring mixed with chopped dry wheat grass including providing and laying polythene of specified thickness under mud flooring, leveling and finishing to the following thickness complete in all respects. 50mm thickness.

PAVEMENTS

Plinth Protection Providing & Making plinth protection 100 mm thick of gravels, free from all type of dust and small graded stones , well rammed and consolidated including finishing the top smooth as per drawings , specifications and as directed by EIC

Rubble Soling Providing and laying upto 300mm rubble soling hand packed and interstices filled with stone metal/murrum including rolling leveling and compaction as per specifications & as directed by EIC. Boulder size will be 150mm or below, measurement will be in cum after compaction.

GLAZING / FACADE WORKS uPVC Window Providing and Fixing factory made standard quality uPVC casement/sliding window , made of extruded profiles. Profiles of frames and sash will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 ± 0.2 mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, all complete as per direction of Engineer-in-charge. (Glazing, etc. to be paid separately.)

Casement Window (With friction hinge & outward opening) including: Casement Frame (67 mm x 62 mm) Casement Window Sash / Mullion (67 mm x 75 mm ) (style, rail and intermediate section) Casement Glazing bead (35 mm x 18 mm) including hardware

Sliding Window (Two Track, 2/4 Shutters) including: Two Track Sliding Frame (67 mm x 52 mm) Sliding window Sash (60 mm x 44 mm) Sliding Interlock for Window (one vertical length in each shutter)( 45.5 mm x 28 mm) Sliding Glazing bead (35 mm x 18 mm) including hardware

DGU( TOUGHEN) Providing & fixing factory cut/processed mechanically sealed composite glass (configuration 6 mm thick outer glass + 12 mm thick air gap + 6 mm thick inner glass) with performance parameters of the composite that meet the given acceptable value ranges as follows: Visual Light transmission % (VLT) 15 - 50; External reflectance 5 - 25; Solar factor (SF) or Solar Heat Gain Coefficient (SHGC) 0.2 - 0.38; U value .5 - 1.5 W/sqm.K. R Value 2.86, Colour of glass to be clear/neutral/grey/blue as approved. Make Asahi/Saint Gobain or equivalent. (Vendor to specify the make and name of products considered for quotation. The price should include the cost of wastage, obtaining correct measurement, preparing the glass assembly including cutting, toughening, sealing, mastic, dessicant treatment, etc.)

Providing and fixing float glass panes 8 mm (weight not less than 13.50 kg/sqm) thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).

Providing and fixing float glass panes 5.5 mm (weight not less than 13.50 kg/sqm) thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).

ACP Providing & Fixing Cladding with 4mmthick (0.25+3.5+0.25) with LDPE core coloured, matt finish aluminium composite panels (total thickness of the panel shall be 4mm) of approved make inclusive of anodising the aluminium sections a minimum of 20 micron thickness fixed over non anodised aluminum section of average 25 x 50 or as may be required with joints appropriately placed as per approved shop drawing and coverd with silicon sealant of approved colour as per detailed shop drawing. Shop drawing to be provided by vendor and approved by architect prior to work commencement on sitecladding with 3 mm thick aluminum composite panel sheet fixed over non anodised aluminum section of average 25 x 50 or as may be required with joints appropriately placed as per approved shop drawing and coverd with silicon sealant of approved colour as per detailed shop drawing. shop drawing to be provided by vendor and approved by architect prior to work commencement on sitecladding with 3 mm thick aluminum composite panel sheet fixed over non anodised aluminum section of average 25 x 50 or as may be required with joints appropriately placed as per approved shop drawing and coverd with silicon sealant of approved colour as per detailed shop drawing. shop drawing to be provided by vendor and approved by architect prior to work commencement on site.

SHUTTERS / DOORS

Providing wood work for doors , windows , ventilators.and other frames wrought framed and fixed in position ( First class deodar wood )

Providing and 35mm thick paneled door shutters including ISI marked M.S pressed butt hinges bright finished of required size with necessary screws ,Readymade ornamental modular, factory manufactured machine made of hard wood of approved quality, color and shade

Lockable Sliding Door Bolt Providing and fixing lockable aldrops capable of smooth sliding action. MS powder coated sliding door bolt (aldrop) shall be made from rolled steel . The hasp shall be of MS and screwed to the bolt in a workmen like manner. Alternatively the hasp and bolt should be in one piece. Bolts shall be finished to shape and threaded with worth standardand provided with round brass washers and nuts of sqare or hexagonal shape.All components should be smooth and powder coated.The leading dimensions of aldrop shall be as the length of the bolt and specified diameter. 350mm x 20mm

Hydraulic Door Closer Providing and fixing IS 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete

Tower Bolt Providing and fixing Brushed steel hardwares Providing and fixing tower bolt (barrel type) with necessary screws etc. complete. 150 x 10 mm size

Pull Handle Providing and fixing Brushed steel hardwares Providing and fixing Pull Handle (D type) with necessary screws etc. complete. 150 mm size.

ROOFING WORKS

Galvalume Sheeting Providing & Fixing Colored powder coated Galvalume standing seam sheets roofing (thickness of sheet in mm: 0.55 TCT) curved as per sections /architectural drawings including Eave gutters, downspouts, Gable trims, corner flashing, drip trims, foam closures (inside and outside) and all necessary flashings 0.5mm prepainted (Color to be established during detail engineering stage).and fixing with polymer coated bolts, and nuts, GI plain and bitumen washers or with self drilling fastener and EPDM washers and necessary waterproofing sealants etc. complete as directed by Engineer in Charge.

Providing and fixing J Ridge/ valley 600mm wide, side made up of same specifications as item No N-1

G.S.Sheeting Providing and fixing pre powder-coated corrugated G.S. sheet roofing fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto a pitch of 60 degrees) excluding the cost of purlins, rafters and trusses. (0.50mm thick)

Ridges / Hips / Valleys Providing and fixing ridges or hips / valleys of width 60cm over all width plain G.I sheet fixed with nails G.I limpet washers complete 0.50 mm thick powder coated.

Eaves Boarding Providing and fixing 2mm thick 250mm wide eaves boarding of mild steel including hoisting, fixing and welded complete. Including providing and applying priming coat of red oxide as per specifications with two coates synthetic enamel paint of approved shade as per instructions of EIC.

Soffits Providing and fixing 2mm thick 600mm to 900mm wide soffits of mild steel excluding frame work complete. Including providing and applying priming coat of red oxide as per specifications with two coates synthetic enamel paint of approved shade as per instructions of EIC.

FINISHING WORKS

15 MM THICK PLASTER IN 1:4 CM Providing and applying average 15 mm thk cement plaster in single coat incement sand mortar 1:4 to all internal surfaces at all levels including surfacepreparation, staging, scaffolding and providing & fixing 20 Gauge 150mm widechicken wire mesh at all concrete & brickwork joints and roughening the surfaceas directed.

12 MM THICK PLASTER IN 1:4 CM Providing and applying average 12 mm thk cement plaster in single coat incement sand mortar 1:4 to all internal surfaces at all levels including surfacepreparation, staging, scaffolding and providing & fixing 20 Gauge 150mm widechicken wire mesh at all concrete & brickwork joints and roughening the surfaceas directed.

6 MM THICK PLASTER IN 1:3 CM Providing and applying average 6 mm thk cement plaster in single coat incement sand mortar 1:3 to all ceiling surfaces at all levels including surface preparation, staging, scaffolding and providing & fixing 20 Gauge 150mm wide chicken wire mesh at all concrete & brickwork joints and roughening the surface as directed.

Accoustic Grid Ceiling Providing and fixing Mineral Fibre Board moduler Ceiling manufactuered by USG / Armstrong / Saint Gobain India Ltd as approved by Architect in Tegular edge Mineral textured tiles with approved surface pattern of size 600mm X 600mm x 15 mm having Noise reduction Co-efficient 0.6 light reflection over 75%, Relative Humidity 95%, Suspension system of Silhouette reveal profile grid system with 15mm wide flanges incorporating a 3 or 6 mm central recess of colour all white or all black or white with black as directed, Silhouette main runners and cross tees to have mitred ends and "birdsmouth" notches to provide mitred cruciform junction, fixed to the structural soffit by Butterfly clip hangers, suspension wires & anchor fasteners as per the manufacturer's specification, Suspension wires to be provided at every 600mmm c/c with two nos of ties on each anchor fastener, Perimeter trim of Trulok wall angle in white colour secured to wall at 450mm maximum centres. The rate quoted shall include making cut outs for fixing light fittings, grills, diffusers, speakers, smoke detectors, sprinklers etc.Cut outs have to be made with provision of the frame along perimeter of the cut outs/ opening with channels/ ply to support the ceiling adequately. No extra payment shall be made for making cut outs.

Gypsum False Ceiling Providing & fixing suspended false ceiling using 12.5mm thick Indian gypsum boards confirming to IS 2095-1982 and GI framework of Gyp steel comprising of following. 1. GI perimeter channel of 0.55mm thick having one flange of 20mm, another of 30mm and web of 27mm fixed to brick wall partition along periphery of ceiling with the help of nylon sleeves and screws at 610mm c/c 2. GI intermediate channel ( size, 45mm web, two flanges each of 15mm & thickness 0.9mm ) suspended from the soffit / ceiling at 1200mm c/ c spacing. 3. GI ceiling sections of 0.55mm thick having knurled web of 51.5mm and two flanges each of 26mm with leaves of 10.5mm fixed to intermediate channel with the help of connecting clip at direction perpendicular to the intermediate channel at spacing of 600 mm c/c, . GI suspender angle of 25mmx10mm and thk.0.55mm at spacing of 600mm c/c, fixed to the ceiling / soffit using GI cleat angle 25mm x 25mm, 0.55mm thk. Cleat angle to be fixed to the ceiling / soffit using 6mm dia anchor fastener. Gypsum board to Be finished with Jointing tape and Jointing compound including application of One coat primer as Per Gypsum board Manufactuerer specification. The rate quoted shall include making cut outs for fixing light fittings, grills, diffusers, speakers, smoke detectors, sprinklers etc.Cut outs have to be made with provision of the frame along perimeter of the cut outs/ opening with channels/ ply to support the ceiling adequately. No extra payment shall be made for making cut outs.

APEX PAINT Providing and applying Acrylic based (Apex) paint of approved make and colour over the external surfaces at all levels inclusive ofsurfacepreparation by scrapping the surface and applying withacralycreadymade putty of approved brand as per manufacturer'srecommendations,filling cracks with approved crack fill material suchas Sunfilla orequivalent, applying sealer or primer coat as recommendedby manufacturerand applying two finishing coats, cleaning the floorsurface aftercompletion of work, etc. complete as directed.

ACRYLC EMULSION PAINT Painting, two or more coats with Dulux paint of Spectrum / Nerolac make and approved shade on internal walls and ceilings as required to give an even shade including preparing the surface, applying primer coats, etc. complete all to the satisfaction of EIC.

SYNTHETIC ENAMEL PAINT Providing and applying three coats of Synthetic Enamel paint of Asian/ICI/ Berger make to all surfaces, in approved colourover a coat of primer including preparation of surface by thorough cleaning, sand papering and as per manufacturer specification to give asmooth and even surface, necessary scaffolding etc., complete and asdirected by Engineer-in-charge.

POP PUNNING Providing and applying POP punning to walls of avg. 2mm thickness to line level and plumb including surface preparation; required punning to be undertaken and completed in workman-like manner, to ensure desired finishing standards, as directed by EIC.

POP DECORATIVE MOULDING Providing and fixing POP decorative moulding / cornice as per the drawing complete of 50 x 50 mm size including surface preparation; required punning to be undertaken and completed in workman-like manner, to ensure desired finishing standards, as directed by EIC..

Providing ,Drilling, cleaning and inserting reinforcement (horizontally / vertically) with HILTI HY 150 or approved equivalent in concrete including injecting chemical and allowing for curing all as permanufacturer's specification including scaffolding etc. complete.8mm dia upto 100 mm depth.Using owners supply water & Electricity.

Providing ,Drilling, cleaning and inserting reinforcement (horizontally / vertically) with HILTI HY 150 or approved equivalent in concrete including injecting chemical and allowing for curing all as permanufacturer's specification including scaffolding etc. complete.10mm dia upto 100mm depth.Using owners supply water & Electricity.

Providing ,Drilling, cleaning and inserting reinforcement (horizontally / vertically) with HILTI HY 150 or approved equivalent in concrete including injecting chemical and allowing for curing all as permanufacturer's specification including scaffolding etc. complete.12mm dia upto 250mm depth.Using owners supply water & Electricity.

Providing ,Drilling, cleaning and inserting reinforcement (horizontally / vertically) with HILTI HY 150 orapproved equivalent in concrete including injecting chemical and allowing for curing all as permanufacturer's specification including scaffolding etc. complete.16mm dia upto 270mm depth.Using owners supply water & Electricity.

Providing , Drilling, cleaning and inserting reinforcement (horizontally / vertically) with HILTI HY 150 orapproved equivalent in concrete including injecting chemical and allowing for curing all as permanufacturer's specification including scaffolding etc. complete.20mm dia upto 400mm depth.Using owners supply water & Electricity.

Providing , Drilling, cleaning and inserting reinforcement (horizontally / vertically) with HILTI HY 150 orapproved equivalent in concrete including injecting chemical and allowing for curing all as permanufacturer's specification including scaffolding etc. complete.25mm dia upto 400mm depth.Using owners supply water & Electricity.

Water closet Supplying, installing, testing & commissioning to the entire satisfaction of the owner , water closet squatting pan (Indian type W.C. pan ) with 100mm UPVC P or S trap , 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, 40 mm flush bend, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required as per the directions of Engineer-in-charge. All should as per tender specifications . * White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. Hindware make CNS-WHT-OP01/ WHC-WHT-184A (Jaquar)

Supplying, installing, testing & commissioning to the entire satisfaction of the owner, white vitreous china floor mounted water closet (European type W.C. pan) with seat and lid, 10 litre low level vitreous china flushing cistern with dual flush , conforming to IS:7213 with pvc flush bend with all fittings and fixtures such as brackets etc. complete including cutting and making good the walls and floors wherever required as per the directions of Engineer-in-charge. All should as per tender specifications . * W.C. pan with ISI marked white solid plastic seat and lid . Hindware make CNS-WHT-WH1OP/ CNS-WHT-WCS1 (Jaquar)

Urinal Supplying, installing, testing & commissioning to the entire satisfaction of the owner, white vitreous china flat back half stall urinal of size 615x340x330mm with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, upvc trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required as per direction of EIC. Hindware make. URS-WHT-0705 (Jaquar)

Urinal Partition Supplying, installing, testing & commissioning to the entire satisfaction of the owner,urinal partion of size 1200x450mm including painting of fittings and cutting and making good the walls wherever required as per direction of EIC.Jaquar, Hindware.

Wash Basin Supplying, installing, testing & commissioning of under counter White Vitreous China Wash basin size 630x450 mm with a 15 mm C.P. brass basin tap , including painting of fittings and brackets, cutting and making good the walls wherever required . CNS-WHT-WB04 (Contientnal/ Jaquar) including mixer SQT-516 KN

Providing and fixing of 15mm size chromium plated cast brass wash basin mixer of approved quality.(jaquar)

Providing and fixing of 15mm size chromium plated cast brass wall mixer Non telephonic with lead of approved quality.(jaquar)

Sink Providing and fixing stainless steel sink with drain board, C.I. brackets duly painted white, 40mm C.P. waste, 40mm pvc bottle trap with connection pipe to wall and C.P. wall flange, rubber adapter for waste connection complete including cutting and making good the walls wherever required. * Kitchen sink with drain board of Jayna make * 510x1040 mm bowl depth 250mm.

Sink Tap Supplying, installing, testing & commissioning of 15mm CP brass sink tap with swivel casted spout of approved make. SQT-522KN/ SQT-523KN (ESSCO)

Angle Valve Supplying, installing, testing & commissioning of C.P. brass angle valve with C.P. wall flange, Nut and Washer etc. complete as required.(Wash basin,sink,WC cistern) SQT-526KN (Jaquar/ ESSCO)

Supplying, installing, testing & commissioning of CP Brass two way bib cock with wall flange & Health Faucet / jet spray with plastic flexible pipe 8 mm dia, 1 m long, wall hooked complete as required, including necessary Accessories , installation charges and complete in full respect as per the directions of Engineer-in-charge. Make - Jaguar- 2 way Bib Cock CON-041KN, Jaguar- Hand Shower (Health Faucet) ALD-563

Toilet Paper Holder Supply and fixing of recessed type (S.S) TOILET PAPER HOLDER of approved make including cost of materials and labour, with all lead & lift, loading & unloading & all other incidental charges etc., complete as per specifications as per the directions of Engineer-in-charge. AEC-1151 (ESSCO)

PTMT towel rail of 450MM long with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than170gms as per the directions of Engineer-in-charge.

Mirror Supply & fixing in position of 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. All should as per tender specifications .

Wash basin counter Supplying & constructing wash basin counter made of 75mm thick R.C.C slab and 8mm dia reinforcement bars,centering, shuttering,etc complete

BIB COCK supply of C.P brass bib cock which should include necessary accessories complete in full respect

Soap Dispenser Supply & fixing in position of S.S. liquid wall mounted Soap Dispenser of approved make complete in all respect including all fixing accessories as per requirement Make - Jaguar- Soap Dispenser with Metallic Bottle ACN-1137N

Coat Hook Supply & fixing in position of C P Twin Coat Hook with necessary fixing material etc , all of approved make ,complete in all respect Make - Jaguar- Robe Hook ACN-1191N

INTERNAL & EXTERNAL DRAINAGE WORKS uPVC Pipes (inside the Toilet in filling or chased in wall) Supply, installation,testing & commissioning of uPVC SWR PIPE of approved make confirming to IS:13592 - 1992, Class-B (for 75 mm to 110mm ND) , and IS 4985 - 2000, class-10 kg/sqcm (for 40 mm to 63mm) including fittingsall necessary fittings and specials such as bends , door bends , door tees , cowl piece, junctions offsets, access pieces, jointing with Tee shaped rubber seal ring confirming to IS : 5382-1985 and with PVC Adhesive Solvent, including Cutting, chases/holes in floors / walls / slab.The pipes shall be running over slab (in-filling) in areas such as toilets, Pantry etc. Cost shall be including jamming by pillers, supports of 1:2:4 concrete, as per required slope/Line & level complete as approved by Engineer-in-Charge.All should as per tender specifications.50 mm OD

110mm OD waste

110mm OD Soil Vents

uPVC Pipes (inside the shaft for soil , Waste & Vent) Supply, installation,testing & commissioning of uPVC SWR PIPE of approved make confirming to IS:13592 - 1992, Class-B , including all necessary fittings and specials such as bends , door bends , door tees , cowl piece , junctions offsets, access pieces, jointing with Tee shaped rubber seal ring confirming to IS : 5382-1985 and with PVC Adhesive Solvent.The pipes shall be running inside the shaft/ ceiling level , Fixing and supported by galvanized steel clamps & hangers/MS Brackets etc. duly epoxy coated. Making proper connection as approved by Engineer-in-Charge. All should as per tender specifications .

110 mm OD soil

110mm OD waste

Geyser Supplying, fixing, testing and commissioning of storage type water heater (Geyser) etc. with automatic thermostatic control electric element, pressure release valve, M.S. nuts and bolts etc.complete, conforming to IS: 2082 (Venus) 25 & 50 liters capacity ELJV 50 (AO smith/ Jaquar)

50 liters

25 liters

Floor Trap Supply, installation,testing & commissioning of PVC Floor Trap of size 110x75x50/40 inside the toilet/Pantry filling area of minimum 50 mm water seal , making necessary cutting in slab or floors and making good including supports with cement concrete 1:3:6 complete as approved by Engineer-in-Charge as follows: All should as per tender specifications .

CP Jali Supply , installing of approved make C P Jali with all fittings complete. All should as per tender specifications .

INTERNAL WATER SUPPLYGI Pipes (inside the Toilet & inside building for potable water) Providing, laying, jointing, fixing, testing & painting as per the approved colour Class-B, Galvanised Iron pipes of TATA / ZENITH make confirming to IS: 1239-1982, with all fittings like tees, bends, elbows, reducers, enlargers, unions, nipples, etc Water supply pipe

15mm Dia

20mm dia

25mm dia

32mm dia

40mm dia

15mm Hot water supply

20mm dia

GI Pipes (for exposed pipe in Shaft / Terrace) Providing, laying, jointing, fixing, testing & painting as per the approved colour Class-B, Galvanised Iron pipes of TATA / ZENITH make confirming to IS: 1239-1982, with all fittings like tees, bends, elbows, reducers, enlargers, unions, nipples, etc Domestic water supply pipe

20mm dia.

25mm dia

32mm dia

40mm dia

VALVE FOR INTERNAL AND EXTERNAL WATER SUPLY "Ball Valve Supply, installation,testing & commissioning of Forged brass ball Valves with union of approved make and specifications (suitable for test pressure of not less than 10 kg / sq.cm of the following size) . Thermal insulation with closed cell Elastomeric Nitrile Rubber insulation including all accessories. All should as per tender specifications." In Shaft and at terrace level

15 mm dia

20mm dia

25mm dia

32mm dia

EXTERNAL WORKS Excavation Excavation of trenches in all types of pipes of required width upto 2.5m depth for pipes including ramming of bottoms and get out the excavated soil and then back filling and sand bedding, dewatering of sub soil water /rain water etc. the same as required, in layers not exceeding 20cm depth including consolidation each deposited layer by ramming, watering etc. and disposing the excess soil to the approved dumping ground. as directed by the Engineer-in-Charge

Providing and laying in position reinforced cement concrete of specified grade excluding the cost of centering and shuttering. All work up to all levels. 1:2:4 (1Cement: 2 fine sand: 4 graded stone aggregate 20mm nominal Size) Crushed including shuttering.

External Sewerage Pipes ( From first manhole to final discharge location) Supply, installation,testing & commissioning of uPVC SWR PIPE of approved make confirming to IS:13592 - 1992, Class-B , including all necessary fittings and specials such as bends, junctions offsets, access pieces, jointing with Tee shaped rubber seal ring confirming to IS : 5382-1985 and with PVC Adhesive Solvent.The pipes shall be running inside the shaft/ ceiling level , Fixing and supported by galvanized steel clamps & hangers/MS Brackets etc. duly epoxy coated. Making proper connection as approved by Engineer-in-Charge. All should as per tender specifications . 150mm dia

S.W. Gully Trap Providing and fixing Salt glazed stone ware Gully Trap class `A’ (of size 150 x 100 mm) masonry chamber of standard design trap to be set in cement concrete 1:2:4, both side 12mm thick plastering with floating coat of neat cement. Making necessary connections brick masonry chamber of size 300mm x 300 mm with 450 mm depth, and water tight double seal C.I. cover with frame complete as per requirement. All should as per tender specifications .

Rectangular Manhole Construction of intercepting chambers of 230mm thick brick masonry in 1:3 cement mortar, 150mm thick foundation in 1:3:6 cement concrete, 20mm thick waterproof cement plastering in 1:3 to both internal and external surface finished with floating coat of neat cement, SFRC cover and frame (medium duty, MD-10 grade designation) 560 mm internal diameter conforming to IS:12592, total weight of cover and frame to be not less than 118 kg fixed over 100mm thick RCC coping in 1:2:4 cement concrete with 10mm dia. HYSD bars at 100mm center to center both ways, curing, complete including excavation, backfilling centering shuttering and disposal of surplus earth , as per specifications and directions of the Engineer-in-charge. All should as per tender specifications. 600 x 600 for depth upto 1.0m

POLYETHYLENE WATER STORAGE TANKS WITH INSULATION Supplying, installing, testing & commissioning of Polyethylene Water Storage Tank, including making holes for inlet, outlet, overflow, level indicator, drain & vent points and suitable cement concrete base including installation,testing & commissioning of thermal insulation over tank with EPS insulation having thermal resistance not less than 0.89 oK.m2/W at 25 deg F, density 40 kg/ cum as per ASTM C 578, covered with wire mesh and finally covered with 12mm thick cement plaster of 1:3 mix (1 cement:3 sand) including all accessories etc For underground installation including excavation,PCC 1:4:8 base,circular brick work 230mm thick along the perimeter of tank to prevent soil collapse and 150mm thick top cover of M25 grade RCC using 12mm dia reinforcement & inspection hatch.

For roof top mounting including CC base over existing slab and necessary tapecrete water proofing works, tank nipples, shutoff valves and float switch

SOAK PIT Providing and making of soakage pit of size: 2 Meter dia and 3.5 Meter deep with dry stone masonry periphery of 0.60 Meters wide and 3.5 Meters in height with inspection top in R.S. masonry in cement mortar 1:6 (1cement: 6 fine sand) 0.60 Meters wide and 0.60 Meters in height, including providing and laying of R.C.C slab 200mm thick in 1:1.5:3 mix of cement concrete with stone aggregate 20mm size and reinforcement @ 96.11Kg / cum of concrete of required dia.To be filled with stone boulders. As per design including cost of heavy duty C.I. manhole cover 0.60x0.60 Meters size.

SEPTIC TANK Providing and Constructing of Septic tanks of size 5.0 Meter x 1.8 Meter x 2.1 Meter ( 0.3 Meter free board) of specified design in cement mortar 1:4 (1cement:4 coarse sand) made up of 230mm thick brick masonry , 150mm thick foundation in M20 -1:1.5:3 mix (1cement:1.5 coarse sand: 3 graded stone aggregate 20mm nominal size) concrete cement concrete with 10mm dia. TMT bars at 100mm and 125mm center to center, 20mm thick waterproof cement plastering in 1:3 to both internal and external surface finished with floating coat of neat cement, 150mm thick RCC cover, and cement concrete beams complete including excavation, backfilling centering shuttering and disposal of surplus earth , curing etc. Rate shall also include flue pipe , RCC inspection cover of heavy duty approved make C.I. manhole covers of 0.6 Meter dia. 2 No. with frame complete , rungs and all accessories as per specifications and directions of the Engineer-in-charge.

INSULATION ON G.I PIPES Providing & fixing thermal insulation over pipes

15mm dia.

20mm dia

25mm dia

32mm dia

PUMPS Supply, installation, testing and commissioning of water supply pump set comprising of the following ( from item no. a to d): All should as per tender specifications . a) Horizontal mono-block centrifugal pump, suitable for operation on 415 volts ± 6%, 3 phase, 50 HZ A.C supply. b) The pump shall be suitable for indoor application and its casing shall be CI, shaft shall be CS & impeller / shaft sleeve / casing wearing ring shall be bronze. The system shall be complete with necessary pressure gauge with gun metal shut off cock on delivery side. c) Squirrel cage induction motor TEFC type for operation on 415 V, 3 phase 50 HZ AC supply for the above pump with speed mentioned as per manufacturer . d) Suitable cement concrete foundation with plaster, (design and drawing to be provided by the Contractor while the foundation will be done by others) complete with Antivibration arrangement of cushy foot mounting. DOMESTIC (1W+1S) Flow : 160 LPM Head :45 mts

Suitable rating common electrical starter and control panel ( MCC panel) for above mentioned pumps along with necessary rating cabling , earthing ,control wiring etc. with proper dressing, necessary ancillaries such as cable tray ,cable tray stand etc. All should as per tender specifications

M/S MOHAMMAD ATIQULLAH DAR CONSTRUCTIONS PVT.LTD

M/S MOHAMMAD ASHRAF GILKAR ENGINEERS AND CONTRACTORS

U S CONSTRUCTIONS

HAJI GHULAM RASOOL SHEIKH AND SONS