REPAIRING AND REPAINTING/POLISHING OF VARIOUS STEEL AND WOODEN FURNITURE AND RECANNING OF VARIOUS CHAIRS AT MIL STN JAISALMER AND POKARAN UNDER GE ARMY JAISALMER

Amount

Almirah Large Steel (FD-67(M) , FD-1031, FD-1033, FD/E6/MAP/18)

M&L for removing of old broken/unserviceabble shelves from Almirah large steel and S&F new shelves made out of 1mm thick MS sheet bent to shape all as specified in drg & directed by Engr-in-charge.

M&L for replacement of broken/dacayed legs from existing Almirah Large steel and S&F new legs made out 1.00 mm thick MS sheet bend to shape all as specified in drg and directed by Engr-In-Charge

M & L for removing of old unserviceable locking device three way from existing Almirah Large steel and S&F new locking device made out of 10 mm MS bar round and 3 mm MS plate all as per site requirement and directed by Engr-In-Charge

M & L for removing of broken/unserviceable handle with bush from existing almirah large steel and S&F new Stainless steel handle with bush all as specified in drg & directed by Engr-in-Charge.

M & L for removing of old unserviceable lock from existing almirah large steel and S&F new lock all as specified in drg & directed by Engr-charge

S&F new cleats made out of 2 mm thick sheet bend to shape and shall be fixed with nut & bolt to give support to shelves all as specified in drg & directed by Engr-in-Charge.

M&L for fine coat of synthetic enamal paint OG/smoke gray to internal /external surface & shelves completely strictly through Spray Gun machine after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required to Almirah Large steel all as specified in drg & directed by Engineer-in-charge.

Almirah Small Steel (FD-1032, FD-1034)

All as per item Ser No 1.01 above but shelves for Almirah small steel.

All as per item Ser No 1.02 above but legs for Almirah small steel.

All as per item Ser No 1.03 above but locking devide for Almirah small steel.

All as per item Ser No 1.04 above but handle for Almirah Small Steel.

All as per item Ser No 1.05 above but lock for Almirah small steel

All as per item Ser No 1.06 above but cleats for Almirah small steel.

All as per item Ser No 1.07 above but painting to Almirah small steel.

Locker Bed Side Steel (FD-1029)

M/L for removing of old unserviceable hasp and stapple from existing Locker bed side steel and S&F new Stainles Steel hasp and stapple of size 100 x 40 x 3 mm as specified in drg and directed by Engr-In-Charge

M&L for removing of old unserviceable handle from existing Locker bed side steel and S&F new Stainless Steel handle 100 mm long as specified in drg and directed by Engr-In-Charge

M & L for removing of old unserviceable hanging pipe from existing Locker bed side steel and S&F new 20 mm dia Stainless Steel conduit pipe with 02 Nos socket as specified in drg and directed by Engr-In-Charge

M&L for removing of broken/dacayed legs from existing Locker Bed Side steel and S&F new legs made out 1.00 mm thick MS sheet bend to shape all as specified in drg and directed by Engr-In-Charge

M&L for fine coat of synthetic enamal paint OG/smoke gray to internal /external surface & shelves completely strictly through spray gun machine after preparation of old painted surfaces by filling with putty , cleaning with sand paper and applying primer where ever required to Locker bed side steel all as specified & directed by Engineer-in-charge.

Book Case Steel (FD-1028)

Removing of old broken/ unserviceabble shelves from Book Case steel and S&F new shelves made out of 1mm thick MS sheet bent to shape all as specified in drg & directed by Engr-in-charge.

M&L for replacement of broken/dacayed legs from exsiting Book Case steel and S&F new legs made out 1.00 mm thick MS sheet bend to shape all as specified in drg and directed by Engr-In-Charge

Removing of broken/unserviceable handle from existing Book Case steel and S&F new Chromium Plated steel handle 100 mm long all as specified in drg & directed by Engr-in-Charge.

Removing of old unserviceable lock from exsiting Book Case steel and S&F new lock all as specified in drg & directed by Engr-charge

Removing of old unserviceable Glass shutter from exsiting Book Case steel and S&F new Glass shutter all as specified in drg & directed by Engr-charge

Removing of old unserviceable Glass pane from exsiting Book Case steel and S&F new Glass pane 3mm thick all as specified in drg & directed by Engr-charge

M&L for fine coat of synthetic enamal paint OG/Smoke Grey to internal /external surface & shelves completely strictly through spray gun machine after preparation of old painted surfaces by filling with puttu, cleaning with sand paper and applying primer where ever required to Book Case steel all as specified & directed by Engineer-in-charge.

Table Office Clerk Steel {FD-84(M) & FD-1004}

M&L for removing old u/s tops from Table office clk steel and S&F new top made out of Prelaminated MDF Board 18mm thick (ISI Marked) Melamine dark coffee shade duly fixed with PVC hot pressed beading all around the top of same colour rest all as specified in drg & as directed by Engr-in-charge.

M&L for removing of unserviceable drawers from existing table office clk steel and S & F new drawers made out 1 mm thick MS sheet bend to shape all as specified in drg & directed by Engr-in-charge.

Removing of old unserviceable lock from existing table office clk steel and S&F new lock all as specified in drg & directed by Engr-in-charge..

M&L for fine coat of synthetic enamal paint OG strictly with spray gum machine to all steel Surface after preparation of old painted surfaces by filling with purrty, cleaning with sand paper and applying primer where ever required to Table office clk steel all as specified & directed by Engineer-in-charge.

Table Office Officer Steel {FD-84(M) & FD-1003}

All as per item Ser No 5.01 above but Top of Table office Offr steel.

All as per item Ser No 5.02 above but drawers of Table office Offr steel.

M&L for removing of unserviceable shutter of side unit from existing table office officer steel and S & F new shutter for side unit made out 1 mm thick MS sheet bend to shape all as specified in drg & directed by Engr-in-charge.

All as per item Ser No 5.03 above but Lock of Table office Offr steel

All as per item Ser No 5.04 above but painting to Table office Offr steel

Table 900x600x760mm steel with and without drawer (FD-1007 & FD-1008)

M&L for removing old u/s tops from Table steel 900x600x760mm and S&F new top made out of Prelaminated MDF Board 18mm thick exterior grade (ISI marked) Melamine dark coffee shade PVC hot pressed beading shall be fixed all around the top of same colour , rest all as specified in drg & as directed by Engr-in-charge.

M&L for removing of existing unserviceable front/rear top rail /bottom middle stiffener of Table steel 900x600x760mm with/without drawer and S&F new front/rear top rail/bottom middle stiffener made out of 25mm MS square tube 1.6 mm thick as specified in drg and as directed by Engr-In-Charge.

M&L for removing of existing unserviceable top side rails/bottom side stiffener of table steel 900 x 600 x 760mm with/without drawer and S&F new top side rails/bottom side stiffener made out of 25mm MS square tube 1.6 mm thick as specified in drg and as directed by Engr-In-Charge.

M&L for removing of existing unserviceable legs of table steel 900x600x760 with/without drawer and S&F new legs made out of 25mm MS square tube 1.6 mm thick as specified in drg and as directed by Engr-In-Charge.

M&L for removing of unserviceable drawers from existing table steel 900x600x760 with drawer and S&F new drawer made out of 1 mm thick MS sheet bend to shap as specified in drg and as directed by Engr-In-Charge.

M&L for fine coat of synthetic enamal paint OG strictly with spray gun machine to steel surface to Table steel 900x600x760mm with/without drawer after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required all as specified & directed by Engineer-in-charge.

Table 900 x 900 x 760mm steel (FD-1009)

M&L for Removing old u/s tops from Table steel 900 x 900 x 760mm and S&F new top made out of Prelaminated MDF Board 18mm thick Melamine dark coffee shade PVC hot pressed beading shall be fixed all around the top of same colour exterior grade (ISI marked), rest all as specified in drg & as directed by Engr-in-charge.

M&L for removing of unserviceable top rails from Table steel 900 x 900 x 760mm and S&F new top rail made out of 25mm MS square tube 1.6 mm thick as specified in drg and as directed by Engr-In-Charge.

M&L for removing of unserviceable legs form table steel 900 x 900 x 760mm and S&F new legs made out of 25mm MS square tube 1.6 mm thick as specified in drg and as directed by Engr-In-Charge.

M&L for fine coat of synthetic enamal paint OG strictly with spray gun machine to steel surface to Table steel 900 x 900 x 760mm after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required all as specified & directed by Engineer-in-charge.

Table Dining ORs {FD-165(M)}

M&L for removing of old u/s top of Table Dining OR and S&F new top made out of 18mm thick block board with 22 gauge aluminim sheet, all as specified in drg & as directed by Engr-in-charge.

M&L for removing of unserviceable front/rear top rail/bottom middle stiffener of table Dining ORs and S&F new front/rear top rail/bottom middle stiffener made out of 25mm MS square tube 1.6 mm thick as specified in drg and as directed by Engr-In-Charge.

M&L for removing of unserviceable top side rails/bottom side stiffener of table Dining ORs and S&F new top side rails/bottom side stiffener made out of 25mm MS square tube 1.6 mm thick as specified in drg and as directed by Engr-In-Charge.

M&L for removing of unserviceable legs of table Dining ORs and S&F new legs made out of 25mm MS square tube 1.6 mm thick as specified in drg and as directed by Engr-In-Charge.

M&L for one fine of synthetic enamal paint black to table dining OR after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required all as specified & directed by Engr-in-charge.

Teapoy Varandah (FD/E6/MAP/17 & FD-255, FD-383)

M & L for removing old u/s tops from Teapoy varandah and S&F new top made out of Prelaminated MDF Board 18mm thick exterior grade (ISI marked), Melamine dark coffee shade PVC hot pressed beading shall be fixed all around the top of same colour rest all as specified in drg & as directed by Engr-in-charge.

M&L for one coat of synthetic enamal paint Black/white to Teapoy Varandah after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required all as specified & directed by Engr-in-charge.

Table computer (FD/E6/MAP/03)

M & L for removing old u/s tops from Table Computer and S&F new top made out of 18mm thick pre-laminated particle board exterior grade (ISI marked) one side teak face & other side white with 4mm thick teak wood beading fixed with fevicol all around, all as specified in drg & as directed by Engr-in-charge.

M & L for removing of unservicesable key board tray (450 x 480mm) fitted with telescopic channel from existing table computer and S&F new key board tray fitted with telescopic channel all as specified in drg and directed by Engr-In-Charge.

M & L for removing of unservicesable pull out tray fitted with telescopic channel from existing table computer and S&F new pull out tray fitted with telescopic channel all as specified in drg and directed by Engr-In-Charge.

S & F L type hard steel joints

S & F 25 x 50mm Rectangular PVC Corner

Chair CBA Steel With Arms {FD-75 (M)}

M&L for removing of old/broken flat iron from existing Chair CBA steel with arms and S&F new flat iron 25 x 3 mm of required length shall be welded with seat of chair CBA Steel with arms complete all as specified and directed by Engr-in-Charge.

M&L for removing of U/S seat from existing Chair CBA steel with arms and S&F new seat made out of 2nd class hard wood teak (Well seasoned) duly black stove polished including cane work 2 mm plastic cane half rounded and 3.5 mm for paremeter work godrej pattern all as specified and directed by Engr-In-Charge.

M&L for removing of U/S back rest from existing Chair CBA steel with arms and S&F new back rest made out of 2nd class hard wood (teak) (Well seasoned) duly black stove polished including cane work 2 mm plastic cane half rounded and 3.5 mm for paremeter work godrej pattern all as specified and directed by Engr-In-Charge.

M& L for removing of U/S broken arms rest from existing Chair CBA steel with arms and S&F new arms rest made out of 1st class hard wood teak (Well seasoned) duly black stove polished fix with screw steel all as specified and directed by Engr-In-Charge.

M&L for one coat of synthetic enamal paint OG to Chair CBA steel with arms after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required all as specified & directed by Engr-in-charge.

Chair CB Steel With Arms & Cushion {FD-444}

M&L for removing of U/S foam seat from existing Chair CBA steel with arms & Cushion and S&F new Cushion back made with 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam all as specified and directed by Engr-In-Charge.

M&L for removing of U/S back rest from existing Chair CBA steel with arms & Cushion and S&F new back rest made S&F new Cushion back made with 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam all as specified and directed by Engr-In-Charge.

M& L for removing of U/S broken arms rest from existing Chair CBA steel with arms & Cushion and S&F new arms rest made out of 1st class hard wood teak (Well seasoned) duly covered with cushion and leatherette fix with screw steel all as specified and directed by Engr-In-Charge.

M&L for one coat of synthetic enamal paint OG to Chair CBA steel with arms & Cushion after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required all as specified & directed by Engr-in-charge.

Chair CB Steel Without Arms {FD-75 (M)}

All as per item ser No 12.01 above but flat iron for Chair CB steel without arms

All as per item ser No 12.02 above but seat of Chair CB steel without arms

All as per item ser No 12.03 above but back of Chair CB steel without arms

All as per item ser No 12.05 above but painting of Chair CB steel without arms

Chair CBA Special with hand rest {FD-120(M), FD-120(M)®}

M&L for removing of U/S seat from existing Chair CBA special steel with hand rest and S&F new seat made out of 2nd class hard wood teak (Well seasoned) duly french polished including cane work 2 mm plastic cane half rounded and 3.5 mm for paremeter work godrej pattern all as specified and directed by Engr-In-Charge.

M&L for removing of U/S back rest from existing Chair CBA special steel with hand rest and S&F new back rest made out of 2nd class hard wood (teak) (Well seasoned) duly french polished including cane work 2 mm plastic cane half rounded and 3.5 mm for paremeter work godrej pattern all as specified and directed by Engr-In-Charge.

M& L for removing of U/S broken arms from existing Chair CBA special steel with hand rest and S&F new arms made out of 1st class hard wood teak (Well seasoned) duly fresnch polished fix with screw steel all as specified and directed by Engr-In-Charge.

M& L for removing of U/S broken hand rest from existing Chair CBA special steel with hand rest and S&F new hand rest made out of 1st class hard wood palnk in one piece teak (Well seasoned) duly fresnch polished fix with screw steel all as specified and directed by Engr-In-Charge.

M&L for one coat of synthetic enamal paint OG to Chair CBA special steel with hand rest after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required all as specified & directed by Engr-in-charge.

Chair School with hand board (FD/E6/MAP/05)

M&L for one coat of synthetic enamal paint black after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required and all as specified and directed by Engr-In-Charge.

M&L for removing of unserviceable one piece seat and back PVC of chair school with hand board and S&F new one piece seat and back PVC for char school with hand board all as specified and directed by Engr-In-Charge.

M&L for removing of unserviceable hand board of chair school with hand board and S&F new hand board made out of 18mm thick prelaminated particle board one side teak and otherside white with 4 mm thick teak wood beading fixed with fevicol all around for chair school with hand board all as specified and directed by Engr-In-Charge.

Chair Varandah (FD-256)

M&L for removing of wornout U/S cane/Nylon newar of chair varandah and one coat of synthetic enamal paint white after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required all as specified and directed by Engr-In-Charge.

M&L for recanning with new standared 3.5 mm wide white plastic cane of semi circular type in mat pattern and all as directed by Engr-In-Charge.

Chair Varandah Godrej (FD/E6/MAP/11)

M&L for one coat of synthetic enamal paint black after preparation of old painted surfaces by applying sand paper and primer where ever required and all as specified and directed by Engr-In-Charge.

M&L for removing of old/broken flat iron from existing Chair Verandah steel and S&F new flat iron 38 x 3 mm of required length shall be welded with seat/Back of chair verandah Steel complete all as specified and directed by Engr-in-Charge.

Bed Hard steel with Ply Wood Top (FD/ E6/MAP/8®)

M&L for removing u/s headrest and S&F New headrest of 38 x 38 mm MS Sqr pipe, 18 x 18mm MS sqr pipe, 25 x 25 mm MS Sqr pipe and 18mm thick pre-laminated MDF board complete all as specified in drg and directed by Engr-in-Charge.

All as per item No 19.01 above, but footrest, rest all as per drg and directed by Engr-in-charge.

M&L for removing of u/s long rail and S&F of new new long rail made out of 25 x 65 mm MS Rect Pipe (18 gauge) all as specified in drg and directed by Engr-in-charge.

M&L for removing of u/s support/Stiifner and S&F of new support made out of 25 x 25 mm MS Sqr pipe 18 gauge all as specified in drg and directed by Engr-in-charge.

M&L for fine coat of synthetic enamal paint black to Bed hard steel with plywood top after preparation of old painted surfaces by cleaning with sand paper and applying primer where ever required all as specified & directed by Engr-in-charge.

M&L for removing of u/s ply wood from bed hard steel and S&F new ply wood of size 1980 x 900 mm 12 mm thick of BWR grade all as specified in drg and directed by Engr-in-charge

Charpoy GI Nylon Newar/Charpoy GI Ply top {FD-220 & FD-220 (R)}

M&L for removing of damaged/broken long rail from charpoy GI pipe and S&F new long rail made out of GI Pipe 32mm bore (ISI marked) medium grade incl threading both sides all as specified in drg & directed by Engr-In-Charge.

M&L for removing of old damaged/broken short rail from Charpoy and making of short rail from old u/s long rail retervied from ser item No 18.01 above incl threading both side & fixing in charpoy GI Pipe all as specified in drg & directed by Engr-In-Charge.

M&L for removing of old damaged/broken leg from charpoy and making leg from old u/s short rail retervied from ser item No 18.02 above incl threading, S&F 6mm MS plate in bottom and 25 x 3mm of MNF clamp (2 Nos each leg) to be welded with legs & fixing in charpoy GI Pipe all as specified in drg & directed by Engr-In-Charge.

M&L for removing of old broken/damaged check nuts and S&F new check nuts of 32 mm dia heavy duty to Charpoy GI pipe all as specified in drg & directed by Engr-In-Charge

M&L for removing old broken/damaged GI elbow 3 way 32 mm bore and S&F new GI elbow 3 way 32mm bore (ISI marked) to Charpoy GI pipe all as specified in drg & directed by Engr-In-Charge.

M&L for tightening of Dismantled/loose charpoys and assembling with retrieved serviceable components and removing of old/torn out nylon newar from existing GI charpoy and re-taping with new superior quality White colour nylon newar closely knitted with 50 to 55 mm wide & weighing not less than 1.5 Kgs per Charpoy and all as specified in drg & directed by Engr-In-Charge.

M&L for tightening of loose charpoys after removing of US plywood from existing GI charpoy and S&F of New 12mm thick plywood, ISI Mark, BWR Grade of size 1980MM x 900MM by fixing with 8 nos nut and bolt of size 40 X 6 mm with GI washer all as specified & directed by Engr-In-Charge. Note : 1. All iron work viz FI shall be painted with two coats of synthetic enamel paint over a coat of red oxide primer. 2. Cost of these factor shall deemed to be included in rate quoted above and nothing extra shall be payable on this account

Charpoy IP/MS with Hard top (FD/E6/MAP-II/01)

M&L for removing of damaged/broken long rail from charpoy MS hard top and S&F new long rail made out of MS pipe 65 x 25mm, 1.6mm thick (ISI marked) incl welding to existing charpoy all as specified in drg & directed by Engr-In-Charge.

M&L for removing of old damaged/broken short rail from Charpoy MS Hard top and S&F new short rail made out of MS pipe 65 x 25, 1.6mm thick (ISI marked) incl welding to exixting charpoy all as specified in drg & directed by Engr-In-Charge.

M&L for removing of old damaged/broken leg from charpoy MS Hard top and S&F legs made out of MS pipe 38 x 38, 1.6mm thick (ISI marked) incl welding to exixting charpoy all as specified in drg & directed by Engr-In-Charge.

M&L for removing of old damaged/broken support/stiffener from charpoy MS Hard top and S&F new support/stiffener made out of MS pipe 25 x 25, 1.6mm thick (ISI marked) incl welding to exixting charpoy all as specified in drg & directed by Engr-In-Charge.

M&L for one coat of synthetic enamal paint black to charpoy MS Hard top after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required all as specified & directed by Engr-in-charge.

M&L removing of US plywood from existing charpoy MS Hard top and S & F New 12mm thick ply, ISI Mark, BWR Grade of size 1980 MM x 900MM by fixing with 10 nos nut and bolt of size 50 X 3 mm complete all as specified & directed by Engr-In-Charge.

Charpoy IP Folding ply top {FD-388 (R) }

M&L for fine coat of synthetic enamal paint Black to all steel surface after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required to Charpoy IP folding ply top all as specified & directed by Engineer-in-charge.

M&L for removing of old u/s Ply Top and S&F new Ply Top of 1980 x 900, 12mm thick of BWR grade into two peaces and fixed with 10 Nos of nut & Bolt to Charpoy IP Folding Ply top all as specified & shown in drg

Table bed side MAP {FD/E6/MAP/15( R)}

M&L for removing of old broken side purlin of table bed side MAP and S&F new side purlin made out Prelaminated MDF Board 18mm thick exterior grade (ISI marked). Melamine dark coffee shade duly fixed with PVC hot pressed beading All as shown in drg and as directed by Engr-in Charge.

M&L for removing of old broken top of table bed side MAP and S&F new top made out Prelaminated MDF Board 18mm thick exterior grade (ISI marked).Melamine dark coffee shade duly fixed with hot pressed beading . All as shown in drg and as directed by Engr-in Charge..

M&L for removing of old broken upper drawer of Table bed Side MAP and S&F new Upper drawer of tabler bed side MAP made out Prelaminated MDF Board 18mm thick laminated exterior grade (ISI marked).Melamine dark coffee shade duly fixed with hot pressed beading , rest as shown in drg and directed by Engr-in-Charge.

M&L for removing of old broken Lower drawer of Table Bed Saide MAP and S&F new Lower drawer of tabler bed side MAP made out Prelaminated MDF Board 18mm thick laminated exterior grade (ISI marked) Melamine dark coffee shade duly fixed with hot pressed beading , rest as shown in drg and directed by Engr-in-Charge.

M&L for removing of old U/s back side of Table Bed Saide MAP and S&F new Back side of tabler bed side MAP made out 12mm thick Ply wood BWR Grade (ISI Marked), rest as shown in drg and directed by Engr-in-Charge.

M&L for removing of old U/s MS tube frame of Table Bed Saide MAP and S&F new MS frame of tabler bed side MAP made out 18 x 18mm, 18 Gauge MS Square pipe, rest as shown in drg and directed by Engr-in-Charge.

Supply and fix copper oxidised steel Handle for Table Bed Side MAP. All as shown in drg and as directed by Engr-in-Charge.

Desk Stand Lacture (FD-1022)

M&L for removing of old unservicable wall pannel Left side/Right side and S&F new wall pannel of 12 mm thick Prelaminated MDF Board all as specified & shown in drg.

M&L for removing of old unservicable wall pannel Front side and S&F new wall pannel of 12 mm thick Prelaminated MDF Board all as specified & shown in drg.

M&L for removing of old unservicable Shelf and S&F new Shelf of 12 mm thick Prelaminated MDF Board all as specified & shown in drg.

M&L for fine coat of synthetic enamal paint black to steel portion of Desk Stand Lacture after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required all as specified & directed by Engr-in-charge.

Form with back FD-78(M)

M&L for fine coat of synthetic enamal paint Black to all steel surface after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required to Form with back all as specified & directed by Engineer-in-charge.

M&L for removing of old u/s top rail and S&F new top rail made out 25 x 25mm MS Square pipe and welded to frame of Form With back all as specified & shown in drg

M&L for removing of old u/s legs and S&F new legs made out 25 x 25mm MS Square pipe and welded to frame of Form With back all as specified & shown in drg

M&L for removing of old u/s stiffener long and S&F new stiffener long made out 25 x 25mm MS Square pipe and welded to frame of Form With back all as specified & shown in drg

M&L for removing of old u/s stiffener short and S&F new stiffener short made out 25 x 25mm MS Square pipe and welded to frame of Form With back all as specified & shown in drg

M&L for removing of old u/s seat and S&F new seat made out 2nd class hard wood planks (Sheesham) without crack and knots in one piece of size 1800x255x25 mm and fixing the same with GI Nuts & bolts to Form With back all as specified & shown in drg

M&L for removing of old u/s Back and S&F new Back made out 2nd class hard planks (Sheesham) without crack and knots in one piece of size 1800x150x19 mm and fixing the same with GI Nuts & bolts to Form With back all as specified & shown in drg

Form without back FD-1027

M&L for one coat of synthetic enamal paint Black to all steel surface after preparation of old painted surfaces by filling with putty, cleaning with sand paper and applying primer where ever required to Form with back all as specified & directed by Engineer-in-charge.

M&L for removing of old u/s legs and S&F new legs made out 25 x 25mm MS Square pipe and welded to frame of Form Without back all as specified & shown in drg

M&L for removing of old u/s stiffener long and S&F new stiffener long made out 25 x 25mm MS Square pipe and welded to frame of Form Without back all as specified & shown in drg

M&L for removing of old u/s stiffener short and S&F new stiffener short made out 25 x 25mm MS Square pipe and welded to frame of Form Without back all as specified & shown in drg

M&L for removing of old u/s seat and S&F new seat made out 2nd class hard wood planks (Sheesham) without crack and knots in one piece of size 1900x255x25 mm and fixing the same with GI Nuts & bolts to Form With back all as specified & shown in drg

Chair Writing ( FD/E6/MAP/18)

M&L for replacement of old u/s Side Arm and S&F of new Side Arm (PU material) and fixed to chair writing all as specified in drawing and directed by Engr -in-Charge

Removing old Cushion seat from the existing Chair writing and S&F new seat made with 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round all as specified in drawing and diredted by Engr-in-Charge

Removing old Cushion Back from the existing Chair writing and S&F new back made with 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round all as specified in drawing and diredted by Engr-in-Charge

Chair Computer (FD/E6/MAP/01)

M&L for replacement of old u/s side arm and S&F of new side arm (PU material) and fixed to chair Computer all as specified in drawing and directed by Engr -in-Charge

Removing old Cushion seat from the existing Chair Computer and S&F new Cushion seat made with 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round all as specified in drawing and diredted by Engr-in-Charge

Removing old Cushion Back from the existing Chair Computer and S&F new Cushion back made with 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round all as specified in drawing and diredted by Engr-in-Charge

M&L for replacement of old u/s base assy and S&F of new base assy to chair Computer all as specified in drawing and directed by Engr -in-Charge

M&L for replacement of old u/s hydraulic assy and S&F of new hydraulic assy to chair Computer all as specified in drawing and directed by Engr -in-Charge

Removing old caster wheel from the existing Chair Computer and S&F new caster wheel all as specified in drawing and diredted by Engr-in-Charge

Chair Revolving (TP)

M&L for replacement of old u/s side arm and S&F of new side arm as per site requirement and fixed to chair Revolving all as specified in drawing and directed by Engr -in-Charge

M&L for Removing old Cushion seat from the existing Chair Revolving and S&F new seat made with 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round and as diredted by Engr-in-Charge

M&L for Removing old Cushion Back from the existing Chair Revolving and S&F new back made with 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round and as diredted by Engr-in-Charge

M&L for replacement of old u/s base assy and S&F of new base assy to chair Revolving as per site requirement and directed by Engr -in-Charge

Removing old caster wheel from the existing Chair Revolving and S&F new caster wheel as per site requirement and diredted by Engr-in-Charge

M&L for replacement of old u/s Hydraulic assy and S&F of new Hydraulic assy to chair Revolving as per site requirment and directed by Engr -in-Charge

M&L for spot Welding of steel items of broken joints etc including scraping preparing surface of welded pertion by grinding and buffing to make fit for painting and applying two coatt of synthetic enamal paint of same shade.

M&L for removing old unserviceable hard rubber shoe from chair verandah and S&F new hard rubber shoe 20mm dia all as as specified and shown in drawing

M&L for removing old unserviceable hard rubber shoe from Chair school, Charpoy IP Folding, Rack Shoe Steel and S&F new hard rubber shoe 25mm dia all as as specified and shown in drawing

M&L for removing old unserviceable hard rubber shoe from Table Office Officer steel , Table office clerks steel, Table 900 x 600 x 760, table 900 x 900 x 760 and Table dining Ors, Form with/without back and S&F new hard rubber shoe 25 x 25mm all as as specified and shown in drawing

M&L for removing old unserviceable hard rubber shoe from Teapoy Varandah , table Bed Side MAP and Chair CBA special with hand rest S&F new hard rubber shoe 18 x 18mm all as as specified and shown in drawing

M&L for removing old unserviceable hard rubber shoe from Bed Hard Steel and S&F new hard rubber shoe 38 x 38mm all as as specified and shown in drawing

M&L for removing old unserviceable hard rubber shoe from Charpoy MS Hard Top and S&F new hard rubber shoe 32 x 32mm all as as specified and shown in drawing

M&L for removing old unserviceable hard rubber shoe from Chair CB Steel with/Without Arm and S&F new hard rubber shoe all as as specified and shown in drawing

M&L for removing old unserviceable hard rubber cap from Chair CB Steel with/Without Arm and S&F new hard rubber cap all as as specified and shown in drawing

Rack side 3/4 space steel (FD-1023)

M&L for Fine coat of synthetic enamal paint OG to internal /external surface & shelves completely after preparation of old painted surfaces by filling with putty, applying sand paper and primer where ever required to Rack side 3/4 spaces steel all as specified & directed by Engineer-in-charge.

Table 1520 x 860 x 760mm (FD-1010)

M&L for removing old u/s tops from Table steel 1520 x 860 x 760mm and S&F new top made out of 18mm thick pre-laminated MDF Board Melamine dark coffee shade exterior grade (ISI marked) duly fixed with hot pressed PVC beading all around , rest all as specified in drg & as directed by Engr-in-charge.

M&L for removing of existing unserviceable front/rear top rail /bottom middle stiffener of Table steel 1520 x 860 x 760mm and S&F new front/rear top rail/bottom middle stiffener made out of 32mm MS square tube 1.6 mm thick as specified in drg and as directed by Engr-In-Charge.

M&L for removing of existing unserviceable top side rails/bottom side stiffener of table steel 1520 x 860 x 760mm and S&F new top side rails/bottom side stiffener made out of 32mm MS square tube 1.6 mm thick as specified in drg and as directed by Engr-In-Charge.

M&L for removing of existing unserviceable legs of table steel 1520 x 860 x760 mm and S&F new legs made out of 32mm MS square tube 1.6 mm thick as specified in drg and as directed by Engr-In-Charge.

Bed Hard wooden with Ply Wood Top (FD-246 )

M&L for removing of u/s headrest and S&F New headrest of 1st class teak wood without crack and knots frame duly covered with 4mm thick teak veneer ply, rest all as specified and shown in drg and directed by Engr -in-charge.

All as per item No 40.01 above but footrest of Bed hard plywood Top, rest all as per drg and directed by Engr -in-charge.

M&L for removing of u/s long rail and S&F of new long rail made out of Ist class Sheesham wood with crack and knots, rest all as specified in drg and directed by Engr -in-charge.

M&L for removing of u/s support/Stiffener and S&F of new support/stiffener made out of 1st class Sheesham wood without crack and knots rest all as specified in drg and directed by Engr -in-charge.

M&L for removing of old u/s ply wood from bed hard and S&F new ply wood of size 1800 x 900 x12 mm thick BWR grade rest all as specified in drg and directed by Engr -in-charge

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of French polish in dark coffee colour strictly through spray Gun to old and new surface of bed hard rest all as directed by Engr -in-charge.

Chair Dinning (FD-228, FD-279.)

M&L for removing of old broken components of chair dinning and S&F new components made out of 1st class teak wood without crack and knots of similar size, shape, plained and fixed with teak wood pinning and fevicol as under:-

Front leg as specified & shown in drg.

Rear leg as specified & shown in drg.

Stiffener as specified & shown in drg.

Front/Side/Rear rails of seat incl drilling of holes for caning as specified & shown in drg

Back rest as specified & shown in drg

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of French polish in dark coffee colour strictly through spray Gun to old and new surface of chair dining and as directed by Engr-in-Charge

Chair Easy (FD-171, FD-209, FD-229)

M&L for removing of old broken components of chair easy and S&F new component made out of 1st class teak wood without crack and knots of similar size, shape, planed and fixed with teak wood pinning and fevicol as under:-

Front leg as specified & shown in drg

Rear leg as specified & shown in drg

Seat rails as specified & shown in drg.

Back rails as specified & shown in drg.

Arms as specified & shown in drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of French polish in dark coffee colour strictly through spray Gun to old and new surface of chair easy and as directed by Engr-in-Charge.

Chair Writing (FD-280)

M&L for removing of old broken components of chair writing and S&F new components made out of 1st class teak wood without crack and knots of similar size, shape ,planed and fixed with teak wood pinning and fevicol as under:-

Front leg as specified & shown in drg

Rear leg as specified & shown in drg

Stiffener as specified & shown in drg

Front/Side/Rear rails of seat incl drilling of holes for caning as specified & shown in drg

Arms as specified & shown in drg

Back rest as specified & shown in drg

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of French polish in dark coffee colour strictly through spray Gun to old and new surface of chair writing and as directed by Engr-in-Charge.

Peg Table (FD-266, FD-277, FD-384)

M&L for removing old unserviceable top and S & F new top made out of prelaminated MDF Board 18 mm thick melamine dark coffee shade exterior grade (ISI marked) fixed with hot pressed PVC beading all around and rest all as specified & shown in drg.

M&L for removing of old unserviceable legs and S & F new leg made out of Ist class teak wood without crack and knots duly finished/smoothened complete all as specified & shown in drg.

All as per item No 44.02 above, but front & rear rail, rest all as per drg.

All as per item No 44.02 above, but bottom side stiffener, rest all as per drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of French polish in dark coffee colour strictly through spray Gun to old and new surface of peg table and as directed by Engr-in-Charge.

Sofa set 5 Seater/4 Seater/3 Seater/2 Seater/1 Seater (FD-373)

M&L for removing of old broken components of Sofa Set and S&F new components made out of 1st class teak wood without crack and knots of similar size,shape,planed and fixed with teak wood pinning and fevicol as under:-

Legs as specified & shown in drg

Side rails of Seat/Back as specified & shown in drg

Stiffener of Seat/Back as specified & shown in drg

Front/Rear rails of seat sofa set 3 seater as specified & shown in drg

Front/Rear rails of seat Sofa 1 seater as specified & shown in drg

Top/Bottom rails of back Sofa set 3 seater as specified & shown in drg

Top/Bottom rails of back sofa set 1 seater as specified & shown in drg

M&L for replacement of old u/s foam cushion and S&F new foam cushion of size 530mm x 560mm" x 4" thick, 32 density of Cool foam or equivalent make of duly covered with tapestry cloth. Tapestry cloth should be of Bombay Dyeing Co. and not less than Rs.400/- per Mtr ans as approved by GE.

Removing old tapestry cloth from the existing cushion and S&F new tapestry cloth. Tapestry cloth should be of Bombay Dyeing Co. and not less than Rs.400/- per Mtr only of same size and shape as specified & shown in drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of French polish in dark coffee colour strictly through spray Gun to old and new surface of sofa set 5 Seater and as directed by Engr-in-Charge

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of French polish in dark coffee colour strictly through spray Gun to old and new surface of sofa set 2 Seater and as directed by Engr-in-Charge

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of French polish in dark coffee colour strictly through spray Gun to old and new surface of sofa chair 1 Seater and as directed by Engr-in-Charge

Table 600 x 600 x 760 mm (FD-293)

M&L for removing old unserviceable top and S & F new top made out of prelaminated MDF Board 18 mm thick melamine dark coffee shade exterior grade (ISI marked) duly hot pressed beading all around and as specified & shown in drg.

M&L for removing of old unserviceable rails and S & F new rails made of 1st class teak wood without crack and knots duly finished/ smoothened complete all as specified & shown in drg and as directed.

All as per item No 47.02 above, but legs, rest all as specified & shown in drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of French polish in dark coffee colour strictly through spray Gun to old and new surface of table 600 x 600 x 760 mm and as directed by Engr-in-Charge.

Table 900 x 900 x 760 mm (FD-291)

M&L for removing old unserviceable top and S & F new top made out of prelaminated MDF Board 18 mm thick melamine dark coffee shade exterior grade (ISI marked) duly fixed with hot pressed PVC beading all around and rest all as specified & shown in drg.

M&L for removing of old unserviceable rails and S & F new rails made of 1st class teak wood without crack and knots duly finished/ smoothened complete all as specified & shown in drg and as directed.

All as per item No 48.02 above, but legs, rest all as specified & shown in drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of French polish in dark coffee colour strictly through spray Gun to old and new surface of table 900 x 900 x 760 mm and as directed by Engr-in-Charge.

Teapoy Wooden FD-382

M&L for removing old unserviceable top and S & F new top made out of prelaminated MDF Board 18 mm thick melamine dark coffee shade exterior grade (ISI marked) duly fixed with hot pressed PVC beading rest all around all as specified & shown in drg.

M&L for removing of old unserviceable legs and S&F new legs made of 1st class teak wood without crack and knots duly finished/ smoothened complete all as specified & shown in drg and as directed.

All as per item No 49.02 above, but front/rear rails, rest all as specified & shown in drg.

All as per item No 49.02 above, but bottom side stiffener, rest all as specified & shown in drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of French polish in dark coffee colour strictly through spray Gun to old and new surface of teapoy wooden and as directed by Engr-in-Charge

Table writing FD-275 :

M&L for removing old u/s top and S&F new top for table writing made out of 18 mm thick prelaminated MDF Board melamine dark coffee shade exterior grade (ISI marked) duly fixed with hot pressed beading rest all around all as specified & shown in drg.

M&L for removing old u/s legs and S&F new legs made out of 1st class teak wood without crack and knots duly finished/smoothened complete all as specified & shown in drg.

All as per item No 50.02 above, but front/rear rails, rest all as specified & shown in drg.

All as per item No 50.02 above, but side rails/bottom side stiffener rest all as specified and shown in drg.

All as per item No 50.02 above, but bottom middle stiffener rest all as specified and shown in drg.

M&L for removing old u/s drawers and S&F new drawers complete all as specified & shown in drg.

M&L for removing old u/s side purlin and S&F new side purlin all made out of 19mm thick prelaminated particle board both side teak face exterior grade (ISI marked) as specified & shown in drg.

M&L for removing old u/s back and S&F new back made out of 19mm thick prelaminated particle board both side teak face exterior grade (ISI marked) complete all as specified & shown in drg.

M&L for removing old u/s shutters and S&F new shutters complete made out of 19mm thick prelaminated particle board both side teak face exterior grade (ISI marked)all as specified & shown in drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of French polish in dark coffee colour strictly through spray Gun to old and new surface of table and as directed

Table centre , Table Centre two Tier ( FD-274)

M&L for removing of old u/s top and S&F new top for table centre made out of prelaminated MDF Board 18 mm thick melamine dark coffee shade exterior grade (ISI marked) duly fixed with hot pressed PVC beading all around, rest all as specified & shown in drg.

M&L for removing of old u/s top second Tier and S&F new top for second Tier for table centre tow tier made out of prelaminated MDF Board 18 mm thick melamine dark coffee shade exterior grade (ISI marked) duly fixed with hot pressed PVC beading all around, rest all as specified & shown in drg.

M&L for removing of old u/s front/rear top rails and S&F new front/rear rails made out of 1st class teak wood without crack and knots duly finished/ smoothened complete as specified & shown in drg.

All as per item No 51.03 above, but side top rails/bottom side Stiffener, rest all as per drg.

All as per item No 51.03 above, but legs, rest all as per drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of French polish in dark coffee colour strictly through spray Gun to old and new surface of table centre and as directed by Engr-in-Charge.

Table Dining 6 Persons (1500x900mmx760mm) FD-273 :

M&L for removing of old u/s top and S&F new top of size 1500 x 900 for table dining 6 persons made out of prelaminated MDF Board 18 mm thick melamine dark coffee shade exterior grade (ISI marked) duly fixed with hot pressed PVC beading all around,all as specified & shown in drg.

M&L for removing old u/s legs and S&F new legs made out of Ist class teak wood without crack and knots duly finished/ smoothened complete as specified & shown in drg

All as per item No 52.02 above, but side rails/Support, rest all as per drg.

All as per item No 52.02 above, but front/rear long rails, rest all as per drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of French polish in dark coffee colour strictly through spray Gun to old and new surface of table dining 6 person and as directed

Table 900 x 600 x 760 mm with and without drawer (FD- 283 , FD- 284)

M&L for removing old u/s top and S&F new top for table 900 x 600mm made out of prelaminated MDF Board 18 mm thick melamine dark coffee shade exterior grade (ISI marked) duly fixed with hot pressed PVC beading all around, rest all as specified & shown in drg.

M&L for removing old u/s legs and S&F new legs made out of 1st class teak wood without crack and knots duly finished/ smoothened complete all as specified & shown in drg.

All as per item No 53.02 above, but Short rail/bottom side Stiffener, rest all as per drg.

All as per item No 53.02 above, but front/rear long rails/ bottom middle Stiffener , rest all as per drg.

M&L for removing old u/s drawers and S&F new drawers complete all as specified & shown in drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of French polish in dark coffee colour strictly through spray Gun to old and new surface of table 900 x 600 and as directed by Engr-in-Charge

Table Dressing Gents with Mirror (FD-230)

M&L for removing old u/s broken looking mirror and S&F new looking mirror of size 760 x 380 x 5.5mm duly framed made out of Ist class teak wood without crack and knots of size 25 x 20 mm & 6mm thick commercial ply on back and supported with batten 35 x 25mm all as specified & shown in drawing

M&L for removing of Lower box and S&F new Lower box complete made out of Prelaminated particle board with drawer complete all as per drawing (back shall be 06 mm ply)

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of French polish in dark coffee colour strictly through spray Gun to frame of mirror/beading of lower box etc and as directed by Engr-in-Charge

Table bed side (FD -248, FD-276)

M&L for removing of old broken side purlin of table bed side S&F new side purlin made out prelaminated MDF Board 18 mm thick melamine dark coffee shade exterior grade (ISI marked) duly fixed with hot pressed PVC beading all around, rest all as specified & shown in drg.

M&L for removing of old broken top/bottom/shelve of table bed side S&F new top/bottom/shelve made out prelaminated MDF Board 18 mm thick melamine dark coffee shade exterior grade (ISI marked) duly fixed with hot pressed PVC beading all around,rest all as specified & shown in drg.

M&L for removing of old broken back of table bed side S&F new back for table bed side made out 6mm thick commercial ply wood, as specified & shown in drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of French polish in dark coffee colour strictly through spray Gun to beading of table bed side and as directed by Engr-in-Charge

Table Draughtsman FD-6(M) , FD-303

M&L for removing old u/s top and S&F new top for table Draughtsman made out of prelaminated MDF Board 18 mm thick melamine dark coffee shade exterior grade (ISI marked) duly fixed with hot pressed PVC beading all around, rest all as specified & shown in drg.

M&L for removing old u/s legs and S&F new legs made out of 1st class teak wood without crack and knots duly finished/ smoothened and fixed with teak wood pinning and fevicolall as specified & shown in drg.

All as per item No 56.02 above, but side top rails all as specified & shown in drg.

All as per item No 56.02 above, but front/rear top rails all as specified & shown in drg.

All as per item No 56.02 above, but bottom side Stiffeners all as specified & shown in drg.

All as per item No 56.02 above, but foot rest all as specified & shown in drg.

M&L for preparation of surfaces by cleaning with emery paper and using putty where ever required to obtain clean surface and polishing two coat of French polish in dark coffee colour strictly through spray Gun to old and new surface of table draughtsman and as directed by Engr-in-Charge.

Chair dining cushioned (FD/E6/MAP/10)

M&L for removing of old broken components of chair dining cushioned and S&F new components made out of 1st class teak wood without crack and knots of similar size,shape, planed and fixed with teak wood pinning and fevicol as under:-

Front leg as specified in drg

Rear leg as specified in drg

Stiffener as specified in drg

Front/Rear/Side rail of seat as specified in drg

Vertical Strips as specified in drg

Back rest as specified in drg

Seat of 12mm commercial ply wood as specified in drg.

M&L for replacement of old unserviceable foam cushion of seat and S&F of new foam cushion of size 450mm x 450mm and 75 mm thick of 32 density of cool foam or equivalent make , duly covered with tapestry cloth. Tapestry cloth should be of Bombay Dyeing Co. and not less than Rs.400/- per Mtr as approved by GE.

Removing old tapestry cloth from the existing cushion and S&F new tapestry cloth. Tapestry cloth should be of Bombay Dyeing Co. and not less than Rs.400/- per Mtr only of same size and shape as specified in drg.

M&L for preparation of surfaces by using putty where ever required and cleaning with emery paper to obtain clean surface and polishing two coat of French polish in dark coffee colour strictly through spray Gun to old and new surface of chair dining cushioned and as directed by Engr-in-Charge.

Mirror With Shelf (FD-404)

M&L for removing old u/s broken looking mirror and S&F new looking mirror of size 355 x 455 x 5.5mm & frame made out of Ist class teak wood without crack and knots of size 25 x 19 mm & 6 mm thick commercial ply on back including polishing the frame complete all as directed by Engr-In-Charge.

M&L for removing old u/s Shelf and S&F new Shelf of size 600 x 380 made out of particle board with 4mm thick teak beading and MS Bracket of Angle Iron of size 150x125 mm complete all as directed by Engr-In-Charge.

M&L for removing old decayed cane plastic of any size and re-canning with new cane (Superior quality) white colour of chair easy, chair Dining, Chair writing and stool dressing CB, etc with 2mm wide half rounded cane and 3.5mm cane in perimeter as per Godrej pattern and all as directed by Engr-In-Charge.

S&F 1st class teak wood Corner of size 100 x 100 x 25mm thick to be fixed with 60mm steel screw between the legs and top rails of Table dining 8 Pers/6 Pres/4 Pers, Table 900 x 900 x 760mm, Table draughtsman, Tale 600 x 600 x 760, table 900 x 600 with and without drawer etc and as directed by Engr-in-charge

S&F 1st class teak wood Corner of size 75 x 75 x 25mm thick to be fixed with 60mm steel screw between the legs and rails of chair Dining, Chair writing, Chair easy, Peg table, Teapoy, Table Centre etc and as directed by Engr-in-charge

Supply and fix knob for drawers and shutters of Table writing, Table 900 x 600 with drawer, Table dressing Gents etc. All as specified and shown in drg or as directed by Engr-in-Charge.

Supply and fix FI Clips for Dressing Mirror Gents and Mirror with shelve etc. All as specified and shown in drg or as directed by Engr-in-Charge.

M&L for spot Welding of steel items of broken joints etc including scraping preparing surface of welded pertion by grinding and buffing to make fit for painting and applying two coatt of synthetic enamal paint of same shade.

M&L for removing old unserviceable hard rubber shoe from chair verandah and S&F new hard rubber shoe 20mm dia all as as specified and shown in drawing

M&L for removing old unserviceable hard rubber shoe from Table Office Officer steel , Table office clerks steel, Table dining ORs, Form with/without back and S&F new hard rubber shoe 25 x 25mm all as as specified and shown in drawing

M&L for removing old unserviceable hard rubber shoe from Charpoy MS Hard Top and S&F new hard rubber shoe 32 x 32mm all as as specified and shown in drawing

M&L for removing old unserviceable hard rubber shoe and Cap from Chair CB Steel with/Without Arm and new hard rubber shoe all as as specified and shown in drawing

Supply and fix hard rubber rings at the bottom of Legs of chair dining, chair dining JCOs/OR, Chair writing, chair dining cushioned, chair easy, chair easy cushioned, chair dtmn etc

Supply and fix hard rubber rings at the bottom of Legs of Table Dining, Table 900 x 900 x 760mm, Table 900 x 600 x 760mm, Table Centre, Sofa Sets and Peg table etc

Vinayak Distributors

Chandra Enterprises

F.M. KHAN SONS

PRAFUL ENTERPRISES

B.S Constructions

L.BHIMSEN

M/s Ramdev Jangid