Renovation of Type IV (Old) Residential Quarters

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.one & more coat (Old work)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coat (Old work)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 1 km lead: area 3 sq. metres and below.

Providing and fixing of S S curtains rod 20-25mm thick with all fittings (304)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately): Powder coated aluminium (minimum thickness of powder coating 50 micron) (16 gauge)

Rubbing/polishing of existing marble chips floor to achieve glossy/mirror (Old work)

12 mm. cement plaster with course (1:4)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and laying Vitrified tiles/Glazed tiles in floor & walls with different sizes (thickness to be specified by the manufacturer), with water absorption less than0.08% and conforming to IS:15622, of approved brand & manufacturer in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Note:- Size;-1200 x 600 mm.