Repair and polishing to wooden furniture and repair and recanning to various types of chairs (wooden / steel) at Suratgarh Mil Stn

Amount

Taking out carefully following old unserviceable parts of Table Dinning 6 Persons and Supply & fixing new parts made out of 1st class shisham hard wood duly seasoned free of knots and size of all members shall be as per drawing or as specified and directed :- Drg No :- FD-239, 273 & FD/MAP-II/03 (a) Leg

(b) Front rail

(c) Side rail

(d) Top of size 1500 x 900mm made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame with wooden corner complete all as per drawings.

(e) 'L' shape MS flat iron 25mm x 5mm x 125mm long fixed with screw inlcuding two coat of synthetic enamel paint over a coat of primer between leg and rail to tight the whole frame.

Taking out carefully following old unserviceable parts of Table 900 x 600mm with / without Drawer and Supply & fixing new parts made out of shisham wood duly seasoned free of knots and size of all members shall be as per drawing or as specified and directed :- Drg No :- FD-223, 224, 283 & 284 (a) Leg

(b) Long rail

(c) Short rail

(d) Drawer made out of 6mm thick ply wood commercial face both sides ISI marked at bottom & 18mm thick prelaminated particle board ISI marked at sides

(e) Stiffener long

(f) Stiffener short

(g) Table Top of size 900 x 600mm made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame complete all as per drawings.

Taking out carefully following old unserviceable parts of Table Dinning 8 Persons and Supply & fixing new parts made out of shisham wood duly seasoned free of knots and size of all members shall be as per drawing or as specified and directed :- Drg No :- FD-239, FD-273 & FD/MAP/09 (a) Leg

(b) Front rail

(c) side rail

(d) Top of size 1800 x 900mm made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame with wooden corner complete all as per drawings.

(e) 'L' shape MS flat iron 25mm x 5mm x 125mm long fixed with screw inlcuding two coat of synthetic enamel paint over a coat of primer between leg and rail to tight the whole frame.

Taking out carefully following old unserviceable parts of Table 900 x 900 x 760mm and Supply & fixing new parts made out of shisham wood duly seasoned free of knots and size of all members shall be as per drawing and as specified and directed :- Drg No :- FD-291 (a) Leg

(b) Rail

(c) Top of size 900 x 900mm made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame complete all as per drawings.

Taking down old unserviceable parts from TEAPOY and supply and fixing of new parts made out of shisham wood duly seasoned free of knots. Sizes of all members shall be as per drawing and as directed by Engr-in-charge. Drg No :- FD-278 & FD-382 (a) Long rail

(b) Short rail

(d) Top made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame complete all as per drawings.

(e) Stiffner

(f) 'L' shape MS flat iron 12mm x 3mm x 25mm long fixed with screw inlcuding two coat of synthetic enamel paint over a coat of primer between leg and rail to tight the whole frame.

Taking down old unserviceable parts from PEG TABLE and supply and fixing of new parts made out of shisham wood duly seasoned free of knots. Sizes of all members shall be as per drawing and as directed by Engr-in-charge. Drg No :- FD-236, FD-255, FD-277 & FD-384 (a) Long rail

(b) Short rail

(d) Top made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame complete all as per drawings.

(e) 'L' shape MS flat iron 12mm x 3mm x 25mm long fixed with screw inlcuding two coat of synthetic enamel paint over a coat of primer between leg and rail to tight the whole frame.

Taking down old unserviceable parts from SIDE BOARD and supply and fixing of new parts made out of shisham wood duly seasoned free of knots. Sizes of all members shall be as per drawing and as directed by Engr-in-charge Drg No :- FD-241 & FD-371 (a) Drawer made out of 6mm thick plywood commercial face both side ISI marked at bottom and 18mm thick prelaminated partical board ISI marked at sides

(b) Side made from 18mm thick prelaminated particle board ISI marked

(c) Back made out of 6mm thick ply wood commercial face both sides ISI marked

(d) Top made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame complete all as per drawings.

(e) Leg with frame made out of 1st class shisham wood

(f) Bottom made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination and complete all as per drawings.

(g) Shutter made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame with wooden corner complete all as per drawings.

(h) Shelf made out of 12mm thick ply wood commercial face both sides ISI marked

(j) Partition made from 18mm thick prelaminated particle board ISI marked

Taking down old unserviceable parts from TABLE DRESSING GENTS and supply and fixing of new parts as specified in drg made out of shisham wood duly seasoned free of knots. Sizes of all members shall be as per drawing and as directed by Engr-in-charge. Drg No :- FD-230, FD-239 & FD-379 (a) Mirror 5.0mm thick glass for dressing frame fixed with screw

(b) Back of mirror frame shall be of 6mm thick Ply wood commercial face both side BWR ISI marked all as per drg including key plates.

(c) Top made out of 12mm thick prelaminated particle board, ISI marked Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround complete all as per drawings.

(d) Mirror frame made out of 1st class hard wood (Shisham) duly seasoned

(e) Back for base made out of 12mm thick commercial plywood, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround complete all as per drawings.

(f) Side made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround complete all as per drawings.

(g) Bottom made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination and complete all as per drawings.

(h) Drawer made out of 6mm thick plywood commercial face both side ISI marked at bottom & 18mm thick prelaminated partical board ISI marked at sides

Taking down old unserviceable parts from TABLE DRESSING LADIES and supply and fixing of new parts made out of shisham wood duly seasoned free of knots. Sizes of all members shall be as per drawing and as directed by Engr-in-charge. Drg No :- FD-251 & FD-376 (a) Mirror 5.0mm thick for dressing frame fixed with screws

(b) Back of mirror frame shall be of 6mm thick Ply wood commercial face both sides BWR ISI marked all as per drg.

(c) Mirror frame made out of 1st class hard wood (Shisham) duly seasoned

(d) Drawer made out of 6mm thick ISI marked plywood commercial face both sides at bottom & 18mm thick prelaminated particle board ISI marked at sides

(e) Back made out of 12mm thick commercial ply commercial face both side

(f) Top made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround complete all as per drawings.

(g) Side made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround complete all as per drawings.

(h) Bottom made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination and complete all as per drawings.

(j) 5mm thick sliding glass

(k) Aluminium channel complete of suitable size for sliding for glasss

(l) Leg with frame made out of 1st class shisham wood

Taking down old unserviceable parts from HAT STAND and supply and fixing of new parts made out of shisham wood duly seasoned free of knots. Sizes of all members shall be as per drawing and as directed by Engr-in-charge. Drg No :- FD-235, FD-251 & FD-361 (a) Mirror 5.0mm thick for hat stand fixed

(b) Front 4mm thick one side teak face ply and another side commercial face plywood ISI marked

(c) Back made out of 4mm thick Ply wood commercial face both side ISI marked with key plates

(d) Beading 35mm wide, 6mm thick alround the hat stand made out of teak wood

(e) Copper oxide steel pegs 120mm long

Taking down old unserviceable parts from TABLE BED SIDE and supply and fixing of new parts made out of shisham wood duly seasoned free of knots including all members shall be as per drawing and as directed by Engr-in-charge. Drg No :- FD-248 & FD-276 (a) Table Top made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame complete all as per drawings.

(b) Side made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround complete all as per drawings.

(c) Shelf made out of 12mm thick ply wood commercial face both side ISI marked

(d) Back ply 6mm thick ply wood commercial face both side ISI marked

(e) Bottom made out of 12mm thick Prelaminated particle board exterior grade including teak wood edging

Taking down old unserviceable parts from Table Centre and supply and fixing of new parts made out of shisham wood duly seasoned free of knots. Sizes of all members shall be as per drawing and as directed by Engr-in-charge. Drg No :- FD-29, FD-235, FD-274 & FD-375 (a) Long rail

(b) Short rail

(d) Table Top made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame complete all as per drawings.

(e) Stiffner

(f) 'L' shape MS flat iron 12mm x 3mm x 25mm long fixed with srews inlcuding two coat of synthetic enamel paint over a coat of primer between leg and rail to tight the whole frame.

S&F in replacement Knob of CP brass as per existing design and size to various wooden furniture where as required complete all as specified and directed by the Engineer-in-Charge

Taking down old unserviceable parts from SOFA SET 4 SEATER and supply and fixing of new parts as specified in drg duly seasoned shisham wood, free of knots.Sizes of all members shall be as per drawing and as directed by Engr-in-charge. (a) 100mm thick foam rubber cushion of size 530 x 560mm, 40 density duly covered with Tapestry cloth matching to seat Make of cushion : Sleepwell / Kurlon as approved by Garrison Engineer. Drg No - FD-258, FD-281, FD-373 Note :- Tapestry cloth shall not be less than the rate of Rs 280/- per metre

(b) 100mm thick foam cushion of size 530 x 560mm, 32 density duly covered with Tapestry cloth matching to back Make of cushion : Sleepwell / Kurlon as approved by Garrison Engineer. Drg No - FD-258, FD-281, FD-373 Note :- Tapestry cloth shall not be less than the rate of Rs 280/- per metre

(c) Arm made out of 1st class hardwood (Shisham wood)

(d) Leg made out of 1st class hardwood (Shisham wood)

(e) Front rail of single seater made out of 1st class hardwood (Shisham wood)

(f) Side rail of single seater made out of 1st class hardwood (Shisham wood)

Taking down old unserviceable parts from SOFA SET 5 SEATER and supply and fixing of new parts as specified in drg duly seasoned shisham wood, free of knots.Sizes of all members shall be as per drawing and as directed by Engr-in-charge. (a) 100mm thick foam cushion of size 530 x 560mm, 40 density duly covered with Tapestry cloth matching to seat Make of cushion : Sleepwell / Kurlon as approved by Garrison Engineer. Drg No - FD-258, FD-281, FD-373 Note :- Tapestry cloth shall not be less than the rate of Rs 280/- per metre

(b) 100mm thick foam cushion of size 530 x 560mm, 32 density duly covered with Tapestry cloth matching to back Make of cushion : Sleepwell / Kurlon as approved by Garrison Engineer. Drg No - FD-258, FD-281, FD-373 Note :- Tapestry cloth shall not be less than the rate of Rs 280/- per metre

(c) Arm made out of 1st class hardwood (Shisham wood)

(d) Leg made out of 1st class hardwood (Shisham wood)

(e) Front rail of three seater made out of 1st class hardwood (Shisham wood)

(f) Front rail of Single seater made out of 1st class hardwood (Shisham wood)

(g) Removing worn out tapestry cloth from old cushion (good condition) of sofa set and replace the same with new tapestry cloth of approved quality. Note :- Tapestry cloth shall not be less than the rate of Rs 280/- per metre

(h) Side rail of three / single seater

Taking down old unserviceable parts from TABLE WRITING and supply and fixing of new parts as specified in drg made out of shisham wood duly seasoned free of knots. Sizes of all members shall be as per drawing and as directed by Engr-in-charge. Drg No. :- FD-33 (M), 249 & 275 (a) Leg

(b) Table Top made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame with wooden corner complete all as per drawings.

(c) Drawer made out of 6mm thick ply wood commercial face both sides ISI marked at bottom & 18mm thick prelaminated particle board ISI marked at sides

(d) Shutter of cupboard made from 18mm thick prelaminated particle board ISI marked

(e) Side of cupboard made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination and tighening the frame with wooden corner complete all as per drawings.

(f) 6mm thick plywood back to cup board of table

(g) Bottom of cupboard made from 18mm thick prelaminated particle board ISI marked

(h) Shelf of cupboard made from 12mm thick prelaminated particle board ISI marked

(j) Long rail

(k) Side rail

(l) Stiffner

(m) Locking device of brass bright finish, six lever with key in duplicate and fixed with new nut, bolt & making it fully functional in all respects.

Taking down old unserviceable parts from BIN LINEN MULTIPURPOSE MAP and supply and fixing of new parts of sizes and shape of all members as per drawing and as directed by Engr-in-charge. Drg No :- FD/E6/MAP/09 (a) Shutter (left) of made from 18mm thick prelaminated particle board ISI marked with piano type hinges as per existing pattern

(b) Shutter (right) of made from 18mm thick prelaminated particle board ISI marked with piano type hinges as per existing pattern

(c) Drawer made out of 6mm thick ply wood commercial face both sides ISI marked at bottom & 18mm thick prelaminated particle board ISI marked at sides

(d) Top made out of 18mm thick prelaminated particle board ISI marked of size 1200mm x 450mm including 4mm thick teakwood edging of required side.

(e) Side made from 18mm thick prelaminated particle board ISI marked

(f) Back made out of 12mm thick ply wood commercial face both sides ISI marked

(g) Bottom made from 18mm thick prelaminated particle board ISI marked

(h) Partition made from 18mm thick prelaminated particle board ISI marked

(j) Shelf (left) made from 18mm thick prelaminated particle board ISI marked

(k) Shelf (right) made from 18mm thick prelaminated particle board ISI marked

(l) Leg with frame made out of 1st class shisham wood

(m) Magnetic catcher

(n) Chromium plated MS handle

Taking down old unserviceable parts from Notice Board (900x600mm) and supply and fixing of new parts made out of shisham wood duly seasoned free of knots including all members shall be as per drawing and as directed by Engr-in-charge. Drg No :- FD-117 (M) (a) 6mm thick plywood ISI marked & soft board covered with baize green cloth complete all as per drawings. Note :- Baize green cloth should not less then the rate of Rs 280/- Per RM.

(b) 3mm thick glass complete all as per drawings.

Taking out carefully following old unserviceable parts of Table Dinning 1200 x 900 x 760mm and Supply & fixing new parts made out of shisham wood duly seasoned free of knots and size of all members shall be as per drawing or as specified and directed :- Drg No :- FD/273 & FD/MAP-II / 03 (a) Leg

(b) Top long rail.

(c) Top short rail

(d) Top of size 1200 x 900mm made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 6mm thick Teak wood edging alround and tighening the frame with wooden corner complete all as per drawings.

(e) 'L' shape MS flat iron 25mm x 5mm x 125mm long fixed with screw inlcuding two coat of synthetic enamel paint over a coat of primer between leg and rail to tight the whole frame.

M&L for removing existing unserviceable Cane and recanning with 2mm wide half round plastic cane except that of border which shall be 3mm flat superior quality cream / white colour and weaving of approved quality as per Godrej pattern complete all as specified and directed by Engineer-in-Charge. Make of Cane :- Shah & Shah / M/S Premier / Indian Plastic Drg No FD-03 (M) / FD-279 / FD-229, FD-280 and as applicable

Taking out carefully following old unserviceable parts of Chair Wooden Bottom and Supply & fixing new parts made out of shisham wood duly seasoned free of knots and size of all members shall be as per drawing or as specified and directed :- Drg No :- FD-225 & 285 (a) Front leg

(b) Rear leg

(c) Back rest batten

(d) Side / front / rear rail

(e) Stiffner

(f) Seat made out of 6mm thick BWR Grade ply fixed with 20mm long screws

Supply and fixing following parts made out of MP teak wood as per drawing to CHAIR DINNING after removal of old unserviceable parts :- Drg No :- FD-16, FD-279 (a) Front leg

(b) Rear leg

(c) Back Rest batten

(d) Stiffener

(e) Side / Front / Rear Rails

Supply and fixing following parts made out of MP teak wood as per drawing to CHAIR EASY after removal of old unserviceable parts :- Drg No :- FD-201, FD-229 (a) Front leg

(b) Rear leg

(c) Arm rest

(d) Rail of seat frame

(e) Rail of back frame

Supply and fixing following parts made out of MP teak wood as per drawing to CHAIR EASY CUSHIONED after removal of old unserviceable parts :- Drg No :- FD-358 (a) Front leg

(b) Rear leg

(c) Arm rest with foam covered with rexine

(d) Rail of seat frame

(e) Rail of back frame

(f) 75mm thick foam cushion of 32 density duly covered with Tapestry cloth matching to seat complete all as specified and directed by the Engineer-in-Charge Make : Sleepwell / Kurlon / NINDIYA or ISI marked as approved by Garrison Engineer. Note :- Tapestry cloth should not be less than the rate of Rs 280/- per metre

(g) 75mm thick foam cushion of 32 density duly covered with Tapestry cloth matching to back complete all as specified and directed by the Engineer-in-Charge Make : Sleepwell / Kurlon / NINDIYA or ISI marked as approved by Garrison Engineer. Note :- Tapestry cloth should not be less than the rate of Rs 280/- per metre

Supply and fixing following parts made out of 1st class hardwood shisham as per drawing to CHAIR DINNING PVC SEAT after removal of old unserviceable parts :- Drg No :- FD/MAP-II/05 (a) PVC seat

(b) Front leg

(c) Rear leg

(d) Stiffner

(e) Front / side / back rail

(f) Back rest

Supply and fixing following parts made out of MP teak wood as per drawing to CHAIR WRITING after removal of old unserviceable parts :- Drg No :- FD-250 & FD-280 (a) Front leg

(b) Rear leg

(c) Back Rest batten

(d) Side / Front / Rear Rail

(e) Stiffner

(f) Arms

Taking down old unserviceable parts from CHAIR DINNING LONG BACK and supply fixing of new parts as specified in drg made out of shisham wood duly seasoned free of knots sizes of all members shall be as per drawing and as directed by Engr-in-charge Drg No :- FD-357 (a) Front legs

(b) Rear legs

(c) Stiffner

(d) Front / side / back rail

(e) Rail of back frame

(f) 50mm thick foam cushion of size, 32 density duly covered with Tapestry cloth matching to seat complete all as specified and directed by the Engineer-in-Charge Make : Sleepwell / Kurlon / NINDIYA or ISI marked as approved by Garrison Engineer. Note :- Tapestry cloth should not be less than the rate of Rs 280/- per metre

(g) 50mm thick foam cushion of size, 32 density duly covered with Tapestry cloth matching to seat & back complete all as specified and directed by the Engineer-in-Charge Make : Sleepwell / Kurlon / NINDIYA or ISI marked as approved by Garrison Engineer. Note :- Tapestry cloth should not be less than the rate of Rs 280/- per metre

Supply and fixing following parts made out of 1st class hard wood (Shisham) as per drawing to STOOL DRESSING CB / STOOL after removal of old unserviceable parts :- Drg No :- FD- 282, FD/E-6/MAP/14 & TP (a) Legs

(b) Front Rail

(c) Side Rail

(d) 50mm thick foam cushion of 32 density duly covered with Tapestry cloth complete all as specified and directed by the Engineer-in-Charge Make : Sleepwell / Kurlon / NINDIYA or ISI marked as approved by Garrison Engineer. Note :- Tapestry cloth should not be less than the rate of Rs 280/- per metre.

(e) Seat made out of 12mm thick BWR Grade ply fixed with 20mm long screws

(f) Stiffner

Taking out carefully following old unserviceable parts of Bed Ply Top and Supply & fixing new parts made out of shisham wood duly seasoned free of knots and size of all members shall be as per drawing and as specified and directed :- Drg No :- FD-214, FD-245 & FD-246 (a) 4mm thick plywood ISI Marked (one side teak face & other side commercial) on both side of frame of Head board and 30mm wide to sides and top of head board complete all as specified and directed by Engineer - in – Charge

(b) 4mm thick plywood ISI Marked (one side teak face & other side commercial) on both side of frame of foot board and 30mm wide to sides and top of foot board complete all as specified and directed by Engineer - in – Charge

(c) Ply top made of 12mm thick plywood BWR ISI marked of size 1980mm x 850mm Make :- Century Ply wood / Kit Ply / Sharda Ply wood / National Ply wood

(d) Long leg

(e) Short leg

(f) Long Rail

(g) Side Rail

(h) Support / Stiffner

(j) 'L' shape MS flat iron 35mm x 5mm x 120mm long fixed with screw inlcuding two coat of synthetic enamel paint over a coat of primer between leg and rail to tight the whole frame.

Taking down old unserviceable parts from BOOK CASE and supply and fixing of new parts made out of shisham wood duly seasoned free of knots. Sizes of all members shall be as per drawing and as directed by Engr-in-charge Drg No :- FD-45 (M) & FD-237 (a) Leg with frame made out of 1st class shisham wood

(b) Back made out of 6mm thick ply wood commercial face both sides ISI marked

(c) Top made out of 19mm thick block board ISI marked with 1mm thick laminated sheet

(d) bottom made out of 19mm thick ply wood commercial face both side ISI marked

(e) Side made out of 19mm thick ply wood commercial face both side ISI marked

(f) Shelf made out of 19mm thick ply wood commercial face both side ISI marked

(g) Partition made out of 19mm thick ply wood commercial face both side ISI marked

(h) Shutter made out of 19mm thick ply wood commercial face both side ISI marked

Taking out carefully following old unserviceable parts of Table 600 x 600 x 760mm and Supply & fixing new parts made out of shisham wood duly seasoned free of knots and size of all members shall be as per drawing or as specified and directed :- Drg No :- FD-95, FD-293 (a) Leg

(b) Rails

(c) Table Top of size 600 x 600mm made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame complete all as per drawings.

Taking down old unserviceable parts from CHAIR DINNING CUSHIONED and supply and fixing of new parts of sizes and shape of all members as per drawing and as directed by Engr-in-charge. Drg No :- FD/E6/MAP/10R (a) Front leg

(b) Rear leg

(c) Side / Front / Rear Rails

(d) Stiffner

(e) Seat made from plywood 12mm thick, 5 Ply and Upholstering of chair with new tapestry cloth of minimum Price range of Rs.280 per Mtr of apporved shade with 75mm thik foam sheet of 32 density.

(f) Vertical strip

(g) 'L' shape MS flat iron 15mm x 3mm x 100mm long fixed with screw inlcuding two coat of synthetic enamel paint over a coat of primer between leg and rail to tight the whole frame.

Taking out carefully following old unserviceable parts of T V Trolly and Supply & fixing new parts made out of shisham wood duly seasoned free of knots and size of all members shall be as per drawing or as specified and directed :- Drg No :- FD/E6/MAP/04 (a) Shutter glass 5.0mm thick

(b) Magnetic catcher

(c) Shelf made out of 18mm thick prelaminated particle board ISI marked

(d) Caster wheel

(e) Side made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame complete all as per drawings.

(f) Back made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame complete all as per drawings.

(g) Bottom made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame complete all as per drawings.

(h) Table Top of size 825 x 825mm made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame complete all as per drawings.

Taking down old unserviceable parts from DRESSING MIRROR GENTS and supply and fixing of new parts as specified in drg made out of shisham wood duly seasoned free of knots. Sizes of all members shall be as per drawing and as directed by Engr-in-charge. Drg No :- FD/E6/MAP/16 (a) Mirror 5.0mm thick

(b) Glass shelf 5.5mm thick

(d) Back of mirror frame shall be of 6mm thick Ply wood commercial face both side BWR ISI marked all as per drg including key plates.

(e) Back made out of 12mm thick ply wood commercial face both side BWR ISI marked all as per drg including key plates

(f) Mirror frame made out of 1st class shisham wood

(g) Magnetic catcher

(h) Top made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging complete all as per drawings.

(j) Side made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging complete all as per drawings.

(k) Bottom made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including teakwood edging and complete all as per drawings

CHAIR VARANDAH Drg No :- FD-19, FD-256 & FD-359 (a) M&L for preparation of broken ends and 3mm thick strip gas welding the broken ends properly to chair including preparation of surface and two coat of synthetic enamel paint over a coat of rex oxide on joint

(b) M&L for preparation of old painted surfaces of chair and painting with one coat of synthetic enamel paint white shade complete all as directed by Engineer-in-Charge.

(c) Removal of unserviceable plastic cane from chair and M&L for Reweaving seat and back with 4mm wide flat plastic cane in matt pattern complete all as specified and directed by Engr-In-Charge. Make of Cane :- Shah & Shah / M/S Premier / Indian Plastic

(d) Removal of old unserbiceable PVC shoe of Leg and S&F new PVC shoe of best approved quality of white shade

Material and labour for french polishing to under mentioned items of furniture after preparation by removing old worn out polish, scratching/rubbing with sand paper, filling putty wherever required and making the surfaces smooth for polishing and applying two coats of french polish complete all as specified and as approved by the Engr-in-charge (a) Chair dinning PVC Seat Drg No FD/E6/MAP/05R

(b) Table 900 x 600 x 760 mm without/with drawer Drg No. :- FD-223, FD-224, FD-283 & FD-284

(c) Table bed side Drg No. :- FD-248 & FD-276

(d) Table dining for 6 pers Drg No. :- FD-30, 239, 273 & 376

(e) Table dining for 8 pers Drg No. :- FD-30, 239, 273 & 376

(f) Table dressing gents with mirror Drg No. :- FD-31, 230 & 379

(g) Table dressing ladies with mirror Drg No. :- FD-32, 251 & 378

(h) Teapoy Drg No :- FD-278 & 382

(j) Table peg Drg No. :- FD-25, 277, 236 & 384

(k) Side board Drg No :- FD-26, 241, 371 & 372

(l) Table writing Drg No. :- FD-33, 249 & 275

(m) Table 900 x 900 x 760mm Drg No :- FD-291

(n) Hat Stand Drg No :- 233 & 361

(o) Table Centre Drg No :- FD-235, 134, 274 & 375

(p) Book case Drg No :-FD-45 (M) & FD-237

(q) Sofa set 4 seater (Wooden) Applicable Drg No FD-258, FD-281 & FD-373

(r) Sofa set 5 seater (Wooden) Applicable Drg No FD-258, FD-281 & FD-373

(s) Chair Dinning Cushioned Drg No :- FD/E6/MAP/10R

(t) Notice board (900mmx600mm) Applicable Drg No FD-117 (M) & FD-1042

(u) Table 1200 x 900 x 760mm Drg No FD/E6/MAP II/03

(v) Chair wooden bottom without Arms Drg No FD-56, FD-225 & FD-285

(w) Chair dining Drg No FD-16, FD-228 & FD-279

(x) Chair Writing Drg No FD-250 & FD-280

(y) Chair Easy Drg No FD-201 & FD-229

(z) Chair dinning long back Drg No FD-357

(aa) Chair easy cushioned Drg No FD-358

(ab) Dressing Mirror Gents Drg No FD/E6/MAP/16

(ac) Table (600 x 600 x 760mm) Drg No FD-95

(ad) Bin solid multipurpose Drg No FD/E6/MAP/09

(ae) Stool dressing with cushion Drg No FD/E6/MAP/14

(af) Stool dressing CB Drg No FD-282

(ag) Bed ply top wooden Drg No FD-246 & 247 -------------------------------------------------------------------- Note :- A sum of Rs. 76567/- will be deducted on account of credit for dismantled/ demolished / taken down material. Please refer details on Srl Page No. 25 & 26 (Schedule of Credit) of Tender documents.

vardhman traders

JAIN TRADERS

B K CONTRACTORS

SNEH CORPORATION

shekhar & company

SK INDUSTRIES