REPAIR, RECANNING AND POLISHING OF WOODEN FURNITURE AND REPAIR AND PAINTING OF STEEL FURNITURE UNDER GE GUWAHATI

Amount

REPAIR SIDE BOARD DRG NO. FD-241(M)/372/26(M)

M&L for removing old unserviceable to Top of Side Board board and S&F of new pre laminated particle board 18 mm exterior grade ISI marked of size 1220mm L x 455 mm W complete as shown on drawing and as specified.

M&L for removing old unserviceable Side of Side Board and S&F of pre laminated particle board 18 mm exterior grade ISI marked of size 455mm W x 635 mm H complete as shown on drawing and as specified.

M&L for removing old unserviceable Bottom of Side Board and S&F of new pre laminated particle board 18 mm exterior grade ISI marked of size 1220mm L x 455 mm W complete as shown on drawing and as specified

M&L for removing old unserviceable Drawers of Side board and S&F of pre laminated particle board 18 mm exterior grade ISI marked 360mm L x 455 mm D x 75/140/150/180mm H and 6 mm commercial plywood 455 mm D x 360 mm L at the base of each drawer complete as shown on drawing and as specified.

M&L for removing old unserviceable Leg frame of Side Board and S&F of 2nd class hardwood of same size and shape duly finished/smoothened including polishing with two coats of french polish complete all as specified and shown in drawing.

M&L for removing old unserviceable Back of Side Board and S&F of new 6 mm thick commercial BWR plywood 1220mm (L) x 635 (H) complete as specified and shown on drawing.

M&L for removing old unserviceable shutter cup board of Side Board and S&F of new pre laminated particle board 18 mm exterior grade ISI marked 360mm( L) x 600 mm (H) shutter. The shutters shall be provided with 4mm thick 2nd hardwood edging all round, including polishing with two coats of french polish and each cupboard to be to be fixed with hinges of approved quality complete as specified and shown on drawing.

M&L for removing old unserviceable knobs of Side board and S&F of new 35mm size knobs complete as specified and as directed.

REPAIR TO CHAIR DINING FD-16(M)/279/228

M&L for removing old unserviceable Front Legs of Chair Dining and S&F of new legs of made out of 2nd class hard wood similar in size and shape and providing PVC white shoe to be on each leg complete as specified and shown on drawing.

M&L for removing old unserviceable Rear legs of Chair Dining and S&F of new legs of made out of 2nd class hard wood similar size and shape and providing PVC white shoe to be on each leg complete as specified and shown on drawing.

M&L for removing old unserviceable Front / Side / Rear Rails of Chair Dining and S&F of new rails of made out of 2nd class hard wood similar size and shape complete as specified and shown on drawing.

M&L for removing old unserviceable Back Rest of Chair Dining and S&F of new one of made out of 2nd class hard wood similar size and shape complete as specified and shown on drawing.

M&L for removing old unserviceable Back stiffner of and S&F of new one of made out of 2nd class hard wood similar size and shape complete as specified and shown on drawing.

M&L for assembling the repaired chair dining and S&F beads made of 2nd class hardwood to the interior wall of the seat alongwith making holes for canning as shown on drawing and as directed.

M&L preperation of surface by cleaning with emery paper to obtain clean surface and using putty where ever required and polishing with two coats of french polish to old and new surface as specified and as directed.

REPAIR TO CHAIR DINING WITH CUSHION SEAT MAP FD/E6/MAP/04/FDMAP-II/04

M&L for removing old unserviceable Front legs of Chair Dining with cushion seat and S&F of new legs of made out of 2nd class hard wood similar size and shape and providing PVC white shoe to be on each leg complete as specified and shown on drawing.

M&L for removing old unserviceable Rear legs of Chair Dining with cushion seat and S&F of new legs of made out of 2nd class hard wood similar size and shape and providing PVC white shoe to be on each leg complete as specified and shown on drawing.

M&L for removing old unserviceable Front /Side / Rear Rails of Chair Dining with cushion seat and S&F of new rails of made out of 2nd class hard wood similar size and shape complete as specified and shown on drawing.

M&L for removing old unserviceable Back stiffner of Chair Dining with cushion seat and S&F of new one of made out of 2nd class hard wood similar size and shape complete as specified and shown on drawing.

M&L for removing of old Tapestry and S&F of new one of best quality tapestry, colour approved by Engr-in-Charge including stitching in size over cushion as specified and shown on drawing. Note :- Rate of Tapestry cloth to be minimum of Rs 350 /- per Metre .

Removing the exising worn out seat cushion and providing new seat cushion with 75 mm thick, 32 density foam with fabric on seat of 12mm th Ply 32 density and fixing in the seat for Chair Dining with cushion seat (MAP) complete as specified and shown in drawing and as directed.

M&L for preperation of surface by cleaning with emery paper to obtain clean surface and using putty where ever required and polishing with two coats of french polish to old and new surface as specified and as directed.

REPAIR TO CHAIR EASY (FD-17(M) / 229/281

M&L for removing old unserviceable Front legs of Chair Easy and S&F of new legs of made out of 2nd class hard wood similar size and shape and providing PVC white shoe to be on each leg complete as specified and shown on drawing.

M&L for removing old unserviceable Rear legs of Chair easy and S&F of new legs of made out of 2nd class hard wood similar size and shape and providing PVC white shoe to be on each leg complete as specified and shown on drawing.

M&L for removing old unserviceable Hand Rest of Chair easy and S&F of new one of made out of 2nd class hard wood similar size and shape complete as specified and shown on drawing.

M&L for removing old unserviceable Front /Side / Rear Rails of Chair Easy and S&F of new rails of made out of 2nd class hard wood similar size and shape complete as specified and shown on drawing.

M&L for removing old unserviceable side rail of back of Chair easy and S&F of new one of made out of 2nd class hard wood similar size and shape complete as specified and shown on drawing .

M&L for assembling the repaired chair easy and S&F beads made of 2nd class hardwood to the interior wall of the seat alongwith making holes for canning as shown on drawing and as directed.

M&L for preperation of surface by cleaning with emery paper to obtain clean surface and using putty where ever required and polishing with two coats of french polish to old and new surface as specified and as directed.

REPAIR TO CHAIR WRITING (FD-20(M) / 250 / 280)

M&L for removing old unserviceable Front legs of Chair writing and S&F of new legs of made out of 2nd class hard wood similar size and shape and providing PVC white shoe to be on each leg complete as specified and shown on drawing.

M&L for removing old unserviceable Rear legs of Chair writing and S&F of new legs of made out of 2nd class hard wood similar size and shape and providing PVC white shoe to be on each leg complete as specified and shown on drawing.

M&L for removing old unserviceable Hand Rest of Chair writing and S&F of new one of made out of 2nd class hard wood similar size and shape complete as specified and shown on drawing .

M&L for removing old unserviceable Front /Side / Rear Rails of Chair writing and S&F of new rails of made out of 2nd class hard wood similar size and shape complete as specified and shown on drawing.

M&L for removing old unserviceable side rail of back of Chair writing and S&F of new one of made out of 2nd class hard wood similar size and shape complete as specified and shown on drawing .

M&L for assembling the repaired chair writing and S&F beads made of 2nd class hardwood to the interior wall of the seat alongwith making holes for canning as shown on drawing and as directed.

M&L for preperation of surface by cleaning with emery paper to obtain clean surface and using putty where ever required and polishing with two coats of french polish to old and new surface as specified and as directed.

M&L for Recanning all type of wooden chairs , Stool Dressing , Bin soiled linen etc after removing the old cane and tightening of frames and weaving with new white plastic cane with 1.8mm wide oval type and 3 mm wide oval type for boarder all along the frameof approved quality complete as per pattern shown on drawing and as specified FD-279/228/16(M)/229/250/280282/244. Note:- Cane shall be of plastic strips of superior quality , type-I (HDPE) white or cream as directed by Engr-in-Charge and of uniform width confirming to IS-5387 .

REPAIR TO PEG TABLE (FD-25(M) / 227/384)

M&L for removing old unserviceable Top of Peg Table and S&F of new top made of pre laminated particle board 18 mm exterior grade ISI marked 450mm( L )x 300mm( W) complete with 4mm thick 2nd class hardwood edging all around as shown on drawing and as directed.

M&L for removing old unserviceable Leg of Peg Table and S&F of new legs made of 2nd class hardwood 380mm long as shown on drawing and providing PVC white shoe to be on each leg complete as specified and shown on drawing.

M&L for removing old unserviceable Long Rails of Peg Table and S&F of new long rails 450mm long made of 2nd class hardwood of same size and shape long as shown on drawing and as directed.

M&L for removing old unserviceable Short Rails of Peg Table and S&F of new short rails 300mm long made of 2nd class hardwood of same size and shape long as shown on drawing and as directed.

M&L for preperation of surfaces by cleaning with emery paper to obtain clean surface and using putty where ever required and polishing with two coats of French polish to old and new surface of Peg Table all as shown on drawing and as directed.

REPAIR TO TABLE DINING 6 PERSONS (FD-273)

M&L for removing old unserviceable Top of Table Dining 6 Pers 1500mm x 900mm and S&F of new top made of pre laminated particle board 18 mm exterior grade ISI marked complete with 4mm thick 2nd class hardwood edging all around as specified and shown on drawing and as directed.

M&L for removing old unserviceable Legs of Table Dining 6 Pers 1500mm x 900mm and S&F of new legs made of 2nd class hardwood 760mm height 75mm x 40mm as shown on drawing and providing PVC white shoe to be on each leg complete as specified and shown on drawing.

M&L for removing old unserviceable Long Rails of Table Dining 6 Pers 1500mm x 900mm and S&F of long rails 1500 mm 25mm x 100mm long made of 2nd class hardwood of same size and shape long as shown on drawing and as directed.Make:-Bansum or equivalent as approved by Engr-in-Charge

M&L for removing old unserviceable Short Rails of Table Dining 6 Pers 1500mm x 900mm and S&F of short rails 900mm long 45mm x 90mm long made of 2nd class hardwood of same size and shape long as shown on drawing and as directed.

M&L for dismantling old unserviceable parts and reassembling with new ones along with preperation of surfaces by cleaning with emery paper to obtain clean surface and using putty where ever required and polishing with two coats of French polish to old and new surface of Table Dining 6 Pers 1500mm x 900mm all as shown on drawing and as directed.

REPAIR TO TABLE DINING 8 PERSONS (FD-30(M) / 273)

M&L for removing old unserviceable Top of Table Dining 8 Pers 1800mm x 900mm and S&F of new top made of pre laminated particle board 18 mm exterior grade ISI marked complete with 4mm thick 2nd class hardwood edging all around as specified and shown on drawing and as directed.

M&L for removing old unserviceable Legs of Table Dining 8 Pers 1800mm x 900mm and S&F of new legs made of 2nd class hardwood 760mm height 75mm x 40mm as shown on drawing and providing PVC white shoe to be on each leg complete as specified and shown on drawing.

M&L for removing old unserviceable Long rails of Table Dining 8 Pers 1800mm x 900mm and S&F of long rails 1800 mm 25mm x 100mm long made of 2nd class hardwood of same size and shape long as shown on drawing and as directed.

M&L for removing old unserviceable Short rails of Table Dining 8 Pers 1800mm x 900mm and S&F of short rails 900mm long 25mm x 100mm long made of 2nd class hardwood of same size and shape long as shown on drawing and as directed.

M&L for dismantling old unserviceable parts and reassembling with new ones along with preperation of surfaces by cleaning with emery paper to obtain clean surface and using putty where ever required and polishing with two coats of French polish to old and new surface of Table Dining 8 Pers 1800mm x 900mm all as shown on drawing and as directed.

REPAIR TO TEAPOY (FD-278/382/232) 600mm x 450mm x 540mm

M&L for removing old unserviceable Top of Teapoy 600mm x 450mm and S&F of new top made of pre laminated particle board 18 mm exterior grade ISI marked complete with 4mm thick 2nd class hardwood edging all around as specified and shown on drawing and as directed.

M&L for removing old unserviceable Legs of Teapoy and S&F of new legs made of 2nd class hardwood 540mm height 60mm x 30mm as shown on drawing and providing PVC white shoe to be on each leg complete as specified and shown on drawing.

M&L for dismantling old unserviceable parts and reassembling with new ones along with preperation of surfaces by cleaning with emery paper to obtain clean surface and using putty where ever required and polishing with two coats of French polish to old and new surface of Teapoy all as shown on drawing and as directed.

REPAIR TO TABLE BED SIDE MAP FD/E6/MAP/15

M&L for removing old unserviceable Top of Table Bed Side MAP and S&F of new top 450mm x 450mm made of pre laminated particle board 18 mm exterior grade ISI marked complete as specified and shown on drawing and as directed.

M&L for removing old unserviceable Side of Table Bed Side MAP and S&F of new side 500mm x 450mm made of pre laminated particle board 18 mm exterior grade ISI marked complete as specified and shown on drawing and as directed.

M&L for removing old unserviceable Back of Table Bed Side MAP and S&F of new back made of 6 mm thick commercial BWR plywood 450mm x 450mm complete as specified and shown on drawing.

M&L for removing old unserviceable Drawers upper and lower for Table Bed Side MAP and S&F of new drawer made of 12 mm thick commercial BWR plywood 450mm x 450mm x 100/350mm with 6 mm thick commercial BWR plywood at the base 450mm x 450mm complete as specified and as shown on drawing.

M&L Preperation of old painted steel surfaces and applying two coats of synthetic enamel paint including providing of rubber shoes to Table Bed Side MAP complete as specified and shown on drawing and as directed

M&L for removing old unserviceable Handles and S& F of new handles for drawers for Table Bed Side MAP complete as specified and shown on drawing and as directed Make:- Sample as approved by Engr-in-Charge

REPAIR TO TABLE CENTRE FD-274 (900mm x 450mm x 400mm)

M&L for removing old unserviceable Top of Table Centre and S&F of new top 900mm x 450mm made of pre laminated particle board 18 mm exterior grade ISI marked with 4mm thick 2nd class hardwood edging all around complete as specified and shown on drawing and as directed.

M&L for removing old unserviceable Legs of Table Centre and S&F of new legs made of 2nd class hardwood 400mm height 60mm x 30mm as shown on drawing and providing PVC white shoe to be on each leg complete as specified and shown on drawing.

M&L for removing old unserviceable Top long rails of Table Centre and S&F of new ones made of 2nd class hardwood 900mm Long 20mm x 50mm as shown on drawing and as directed. Make of Hardwood:- Bansum or equivalent as approved by Engr-in-Charge

M&L for removing old unserviceable Top short rails of Table Centre and S&F of new one made of 2nd class hardwood 450mm Long 20mm x 50mm as shown on drawing and as directed. Make of Hardwood:- Bansum or equivalent as approved by Engr-in-Charge

M&L for removing old unserviceable Bottom Long stiffners of Table Centre and S&F of new one made of 2nd class hardwood 900mm Long 20mm x 50mm as shown on drawing and as directed.

M&L for removing old unserviceable Bottom short stiffners of Table Centre and S&F of new one made of 2nd class hardwood 900mm Long 20mm x 50mm as shown on drawing and as directed.Make of Hardwood:- Bansum or equivalent as approved by Engr-in-Charge

M&L for dismantling old unserviceable parts and reassembling with new ones along with preperation of surfaces by cleaning with emery paper to obtain clean surface and using putty where ever required and polishing with two coats of French polish to old and new surface of Table Centre all as shown on drawing and as directed.

REPAIR TO TABLE DRESSING LADIES (FD-32(M) / 251)

M&L for removing old unserviceable Top of Table Dressing Ladies and S&F of new top 900mm x 380mm made of pre laminated particle board 18 mm exterior grade ISI marked with 4mm thick 2nd class hardwood edging all around complete as specified and shown on drawing and as directed.

M&L for removing old unserviceable Side of Table Dressing Ladies and S&F of new side 300mm x 380mm made of pre laminated particle board 18 mm exterior grade ISI marked with 4mm thick 2nd class hardwood edging all around complete as specified and shown on drawing and as directed.

M&L for removing old unserviceable Drawers upper and lower for Table Dressing Ladies and S&F of new drawer made of 12 mm thick commercial BWR plywood 150mm x 380mm x 350mm with 6 mm thick commercial BWR plywood at the base 350mm x 380mm complete as specified and as shown on drawing.

M&L for removing old unserviceable Leg frame of Table Dressing Ladies and S&F of 2nd class hardwood of same size and shape duly finished/smoothened complete all as specified and providing PVC white shoe to be on each leg complete as specified and shown on drawing.

M&L for removing old unserviceable/broken Mirror (366x1220 mm) with frame and S&F of new mirror 5mm th Electro copper plated mirror of polished sheet glass covered on edges and 6mm th plywood at the back and frame made of 2nd class hard wood 45x40 mm complete as specified and as shown on drawing.

M&L of old unserviceable/broken Glass pane / shutter of Table Dressing Ladies and S&F of new one 5 mm thick transparent type supported by alumimium channel as specified and as shown on drawing.

M&L for removing old unserviceable Back of Table Dressing ladies and S&F of new back made of 12 mm thick commercial BWR plywood 900mm x 300mm complete as specified and shown on drawing.

M&L for removing old unserviceable knobs of Table Dressing Ladies and S&F of new 35mm size knobs complete as specified and as directed.

REPAIRS TO TABLE DRESSING GENTS FD-230

M&L for removing old unserviceable Top of Table Dressing Gents and S&F of new top 900mm x 300mm made of pre laminated particle board 18 mm exterior grade ISI marked with 4mm thick 2nd class hardwood edging all around complete as specified and shown on drawing and as directed.

M&L for removing old unserviceable Side of Table Dressing Gents and S&F of new side 150mm x 300mm made of pre laminated particle board 18 mm exterior grade ISI marked with 4mm thick 2nd class hardwood edging all around complete as specified and shown on drawing and as directed.

M&L for removing old unserviceable Drawers upper and lower for Table Dressing Gents and S&F of new drawer made of 12 mm thick commercial BWR plywood 300mm x 300mm x 150mm with 6 mm thick commercial BWR plywood at the base 300mm x 300mm complete as specified and as shown on drawing.

M&L for removing old unserviceable/broken Mirror (380x760mm) with frame and S&F of new mirror 5mm th Electro copper plated mirror of polished sheet glass covered on edges and 6mm th plywood at the back and frame made of 2nd class hard wood 35x25 mm with rawl plugs both at the top side for hanging complete as specified and as shown on drawing.

M&L for removing old unserviceable Back of Table Dressing ladies and S&F of new back made of 12 mm thick commercial BWR plywood 900mm x 150mm complete. Metal Clips to be provided on each repaired Table Dressing Gents for hanging on the wall as specified.

M&L for removing old unserviceable knobs of Table Dressing Ladies and S&F of new 35mm size knobs complete as specified and as directed.

REPAIR TO TABLE WRITING (FD-275) (1145x600x760mm)

M&L for removing old unserviceable Top of Table writing and S&F of new top 1145mm x 600mm made of pre laminated particle board 18 mm exterior grade ISI marked with 4mm thick 2nd class hardwood edging all around complete as specified and shown on drawing and as directed.

M&L for removing old unserviceable Legs of Table Writing and S&F of new legs made of 2nd class hardwood 760mm height 35mm x 55mm as shown on drawing and providing PVC white shoe to be on each leg complete as specified and shown on drawing.

M&L for removing old unserviceable Top Short rail of Table Writing and S&F of new ones made of 2nd class hardwood 600mm length 25mm x 50mm as shown on drawing and as directed.

M&L for removing old unserviceable Top Long rails of Table Writing and S&F of new ones made of 2nd class hardwood 1145mm length 25mm x 50mm as shown on drawing and as directed.

M&L for removing old unserviceable Stiffners side bottom of Table Writing and S&F of new ones made of 2nd class hardwood 600mm length 25mm x 50mm as shown on drawing and as directed.

M&L for removing old unserviceable Stiffners long bottom of Table Writing and S&F of new ones made of 2nd class hardwood 1145mm length 25mm x 50mm as shown on drawing and as directed.

M&L for removing old unserviceable Drawers for Table Writing and S&F of new drawer of the same shape and size made of 12 mm thick commercial BWR plywood with 6 mm thick commercial BWR plywood at the base complete as specified and as shown on drawing.

M&L for removing old unserviceable Cup board shutter of Table Writing and S&F of new one made of pre laminated particle board 18 mm exterior grade ISI marked. The shutters shall be provided with 4mm thick 2nd hardwood edging allround and each cupboard to be provided with magnetic catcher and cupboards to be fixed with hinges of approved quality complete as specified and as shown on drawing.

M&L for removing old unserviceable knobs of Table writing and S&F of new 35mm size knobs complete as specified and as directed.

REPAIR TO SOFA SET 4 & 5 SEATER WITH CUSHION (FD-281)

M&L for removing old unserviceable cushion cover of SOFA SET 4 & 5 SEATER WITH CUSHION and S&F of new cushion cover of size 560mm x 530mm x 100mm made of tapestary cloth, colour as approved by Engr-in-Charge including uphoistering complete as specified and as shown on drawing. Note :- Rate of Tapestry cloth to be minimum of Rs 350 /- per Metre .

M&L for removing old unserviceable CUSHION of SOFA SET 4 & 5 SEATER WITH CUSHION and S&F of new cushion of size 560mm x 530mm, 100mm thick, 32 density for seat and back Table Dressing Ladies and S&F of new 35mm size knobs complete as specified and as shown on drawing.

M&L for removing old unserviceable Front Legs of SOFA SET 4 & 5 SEATER WITH CUSHION and S&F of new Front legs made of 2nd class hardwood as shown on drawing and providing PVC white shoe to be on leg complete as specified and shown on drawing.

M&L for removing old unserviceable Rear Legs of SOFA SET 4 & 5 SEATER WITH CUSHION and S&F of new Rear legs made of 2nd class hardwood as shown on drawing and providing PVC white shoe to be on leg complete as specified and shown on drawing.

M&L for removing old unserviceable Hand Rest of SOFA SET 4 & 5 SEATER WITH CUSHION and S&F of new Hand rest made out of 2nd class hard wood similar size and shape complete as specified and shown on drawing.

M&L for removing old unserviceable Front /Side / Rear Rails of SOFA SET 4 & 5 SEATER WITH CUSHION and S&F of new Front /Side / Rear Rails made out of 2nd class hard wood similar size and shape complete as specified and shown on drawing.

M&L for removing old unserviceable Top rail of SOFA SET 4 & 5 SEATER WITH CUSHION and S&F of new Top rail made out of 2nd class hard wood similar size and shape complete as specified and shown on drawing .

M&L for preperation of surfaces of SOFA SET 4 & 5 SEATER WITH CUSHION by cleaning with emery paper to obtain clean surface and using putty where ever required and polishing with two coats of French polish to old and new surface cpmplete all as shown on drawing and as directed.

REPAIR TO TABLE 3' X 2' (900 X 600mm) WITH DRAWER FD-283

M&L for removing old unserviceable Top of Table 3' X 2' (900 X 600mm) and S&F of new top made of pre laminated particle board 18 mm exterior grade ISI marked complete with 4mm thick 2nd class hardwood edging all around as specified and shown on drawing

M&L for removing old unserviceable Legs of Table 3' X 2' (900 X 600mm) and S&F of new legs made of 2nd class hardwood 760mm height as shown on drawing and providing PVC white shoe to be on each leg complete as specified and shown on drawing.

M&L for removing old unserviceable Top Short rail of Table 3' X 2' (900 X 600mm) and S&F of new ones made of 2nd class hardwood as shown on drawing and as directed.

M&L for removing old unserviceable Top Long rails of Table 3' X 2' (900 X 600mm) and S&F of new ones made of 2nd class hardwood as shown on drawing and as directed.

M&L for removing old unserviceable Stiffners side bottom of Table 3' X 2' (900 X 600mm) and S&F of new ones made of 2nd class hardwood as shown on drawing and as directed.

M&L for removing old unserviceable Stiffners long bottom of Table 3' X 2' (900 X 600mm) and S&F of new ones made of 2nd class hardwood as shown on drawing and as directed.

M&L for removing old unserviceable Drawers for Table 3' X 2' (900 X 600mm) and S&F of new drawer of the same shape and size made of 12 mm thick commercial BWR plywood with 6 mm thick commercial BWR plywood at the base complete as specified and as shown on drawing.

M&L for preperation of surface of 3' X 2' (900 X 600mm) by cleaning with emery paper to obtain clean surface and using putty where ever required and polishing with two coats of french polish to old and new surface as specified and as directed.

REPAIR TO TABLE 3' X 2' (900 X 600mm) WITH OUT DRAWER FD-284/224

M&L for removing old unserviceable Top of Table 3' X 2' (900 X 600mm) with out drawer and S&F of new top made of pre laminated particle board 18 mm exterior grade ISI marked complete with 4mm thick 2nd class hardwood edging all around as specified and shown on drawing

M&L for preperation of surface of 3' X 2' (900 X 600mm) without drawer by cleaning with emery paper to obtain clean surface and using putty where ever required and polishing with two coats of french polish to old and new surface as specified and as directed.

REPAIR TO TABLE COMPUTER TP /FD/E6/MAP/03

M&L for removing old unserviceable Top of Table computer and S&F of new top made of pre laminated particle board 18 mm exterior grade ISI marked with 4mm thick 2nd class hardwood edging all around complete as specified and shown on drawing and as directed.

M&L for removing old unserviceable Shelf of Table computer and S&F of new shelf made of pre laminated particle board 18 mm exterior grade ISI marked complete all as specified and shown on drawing

M&L for removing old unserviceable Keyboard Tray of Table Computer and S&F of new Keyboard Tray made of pre laminated particle board 18 mm exterior grade ISI marked with and including board on telescopic channels complete all around as specified and shown on drawing

M&L for removing old unserviceable Drawer of Table computer and S&F of new Drawer made of pre laminated particle board 18 mm exterior grade ISI marked with telescopic channels complete all around as specified and shown on drawing

M&L for removing old unserviceable Buffers of TableComputer and S&F of new Nylon Buffers provided on each leg complete all as specified and shown on drawing

REPAIR TO TABLE 900mm X 900mm X 760 mm (3' x 3') FD-291

M&L for removing old unserviceable Top of Table 900mm X 900mm X 760 mm and S&F of new top made of pre laminated particle board 18 mm exterior grade ISI marked complete with 4mm thick 2nd class hardwood edging all around as specified and shown on drawing

M&L for removing old unserviceable Leg of Table 900mm X 900mm X 760 mm and S&F of new legs made of 2nd class hardwood as shown on drawing and providing PVC white shoe to be on each leg complete as specified and shown on drawing.

M&L for removing old unserviceable Rail of Table 900mm X 900mm X 760 mm and S&F of new rail made of 2nd class hardwood as shown on drawing complete as specified and shown on drawing.

M&L for dismantling old unserviceable parts and reassembling with new ones along with preperation of surfaces by cleaning with emery paper to obtain clean surface and using putty where ever required and polishing with two coats of French polish to old and new surface of Table 900mm X 900mm X 760 mm complete all as shown on drawing and as directed.

REPAIR TO ALMIRAH LARGE STEEL (DRG NO FD 351/1031)

M&L for removing dents and bends and welding wherever required for Almirah Large Steel,Scrapping old painted surfaces and removing existing paint on surfaces with chemical/aerosal spray,Preperation of surfaces after applying putty and red oxide primer and spray painting of almirah large steel complete(inside and outside) with a coat of synthetic enamel paint as approved complete all as specified and as directed. Colour :- Olive Green or any other colour or combination of colour as directed Note :- Almirah as a whole shall be measured as one unit.

S&F in repair, locks 7 lever Godrej pattern best quality as approved with duplicate stainless steel key complete all as specified and as directed.

S&F in repair, 3 way locking device with new one best quality as approved complete all as specified and as directed.

M&L for removing old /unserviceable legs and S & F of new Legs made out of 1.5 mm PBI sheet to the required shape as per drawing duly welded at the bottom of the frame by removing old rusted unserviceable leg and applying two coats of olive green paint (1st grade quality) over a coat of red oxide primer by spray machine after preparation of surfaces to match the existing surfaces complete all as specified and as directed.

S&F in repair, of 100 mm Steel Chromium Plated Handle for Almirah alongwith nuts and washer complete all as specified and as directed.

REPAIR TO ALMIRAH MEDIUM STEEL (DRG NO FD 243/1032)

M&L for removing dents and bends and welding wherever required for Almirah Medium Steel,Scrapping old painted surfaces and removing existing paint on surfaces with chemical/aerosal spray.Preperation of surfaces after applying putty and red oxide primer and spray painting of almirah Medium steel complete(inside and outside) with a coat of synthetic enamel paint as approved complete all as specified and as directed. Colour :- Olive Green or any other colour or combination of colour as directed Note :- Almirah as a whole shall be measured as one unit.

S&F in repair, locks 7 lever Godrej pattern best quality as approved with duplicate stainless steel key complete all as specified and as directed.

S&F in repair, 3 way locking device with new one best quality as approved complete all as specified and as directed.

M&L for removing old /unserviceable legs and S & F of new Legs made out of 1.5 mm PBI sheet to the required shape as per drawing duly welded at the bottom of the frame by removing old rusted unserviceable leg and applying two coats of olive green paint (1st grade quality) over a coat of red oxide primer by spray machine after preparation of surfaces to match the existing surfaces complete all as specified and as directed.

S&F in repair, of 100 mm Steel Chromium Plated Handle for Almirah alongwith nuts and washer complete all as specified and as directed.

REPAIR TO LOCKER STEEL (DRG NO FD 257/1029)

M&L for removing dents and bends and welding wherever required for Locker Steel, Scrapping old painted surfaces and removing existing paint on surfaces with chemical/aerosal spray, Preperation of surfaces after applying putty and red oxide primer and spray painting of Locker steel complete(inside and outside) with a coat of synthetic enamel paint as approved complete all as specified and as directed. Colour :- Olive Green or any other colour or combination of colour as directed Note :- Locker as a whole shall be measured as one unit.

S&F in repair, Hasp and staple chromium plated 100 mm long complete all as specified and as directed.

S&F in repair, of 100 mm Steel Chromium Plated Handle for Almirah alongwith nuts and washer complete all as specified and as directed.

S&F in repair, conduit pipe of same size ie Chromium plated steel conduit pipe of 19 mm dia with 1.60mm wall thickness alongwith bracket complete all as specified and as directed.

REPAIR TO TABLE OFFICE CLERK (DRG NO FD 381/1004)

M&L for removing dents and bends and welding wherever required for Table office clerk Steel, Scrapping old painted surfaces and removing existing paint on surfaces with chemical/aerosal spray, Preperation of surfaces after applying putty and red oxide primer and spray painting of Table office clerk steel complete(inside and outside) with a coat of synthetic enamel paint as approved and providing new hard rubber/PVC shoes after removing existing old/unserviceable shoes complete all as specified and as directed Colour :- Olive Green or any other colour or combination of colour as directed Note :- Table as a whole shall be measured as one unit.

S&F in repair, brass locks with duplicate keys best quality, suitable for Table office clerk Steel complete all as specified and as directed.

Removing old unserviceable Top and S&F of new top made of 18 mm thick pre laminated particle board exterior grade ISI marked teak face and PVC edging all around as specified and as shown on drawing complete all as specified and as directed.

REPAIR TO TABLE OFFICE OFFICER STEEL (DRG NO FD 84 (M) /1003 /1002)

M&L for removing dents and bends and welding wherever required for Table office officer Steel, Scrapping old painted surfaces and removing existing paint on surfaces with chemical/aerosal spray, Preperation of surfaces after applying putty and red oxide primer and spray painting of Table office Officer steel complete(inside and outside) with a coat of synthetic enamel paint as approved and providing new hard rubber/PVC shoes after removing existing old/unserviceable shoescomplete all as specified and as directed Colour :- Olive Green or any other colour or combination of colour as directed by Engr-in-Charge. Note :- Table as a whole shall be measured as one unit.

S&F in repair, brass locks with duplicate keys best quality, suitable for Table office Officer Steel complete all as specified and as directed.

Removing old unserviceable Top and S&F of new top made of 18 mm thick pre laminated particle board exterior grade ISI marked teak face and PVC edging all around as specified and as shown on drawing complete all as specified and as directed.

REPAIR TO CHARPOY GI PIPE (Drg No. FD-220)

Removing the existing unserviceable plytop and S& F of new 12 mm thick BWR plywood exterior grade quality including flush headed bolts and nuts with washers for fixing plywood to charpoy and spot welding wherever required, Plywood edges to be smoothened and corners rounded complete as specified and as directed Note:- Tightening of existing frame included in this item before replacing of plywood.

S&F in repair, long rail made up of 32mm bore, medium grade GI pipe including, threading, tightening of joints complete all as specified and as directed.

Labour only for Short Rail, (GI pipe retrived from replacement of long rail) including necessary threading, tightening of joints complete all as specified and as directed.

Labour only for Legs, (GI pipe retrived from replacement of Short rail) including necessary threading, tightening of joints complete all as specified and as directed.

S&F in repair, 3 way, 32mm bore GI Elbow, heavy duty complete all as specified and as directed.

S&F in repair, 32mm bore GI Check Nut, complete all as specified and as directed.

REPAIR TO CHARPOY WITH HARD TOP FD/MAP II/01

Removing of old paint and preparing surface by applying putty and one coat of red oxide after welding wherever required (legs/rails) and applying two coats of synthetic enamel paint black colour to match as per standard drawing including removing existing rubber shoes and providing new Hard rubber shoes ( 4 Nos) for each charpoy complete as specified and as directed

Removing of old/unserviceable Ply top from Charpoy MS Sqr Tube & S&F of new 12mm thick BWR plywood of exterior grade and fixing the same with screws 4mm thick alongwith washers complete as specified and as directed

REPAIR TO HOT FOOD TROLLY S/S ELECT DRG NO TP/KALRA

M&L for removing old unserviceable stainless steel body and S & F of new stainless steel 1.00 mm thick ISI marked of standard quality for Hot Food Trolley S/S Elect as specified in drawing and as directed

M&L for removing old unserviceable base revolving wheels /casters and providing of new base revolving collapsible rubber wheels for Hot Food Trolly S/S Elect and as specified on drawing and as directed

M&L for removing of old unserviceable doors & racks and providing of new doors & racks made out of 1 mm thick stainless steel of standard quality ISI marked & movable refrigerator type racks as specified on drawing and as directed

M&L for removing of old unserviceable bowl cover and providing of new bowl cover made of stainless steel of standard quality ISI marked and as specified on drawing and directed

M&L for removing old/unserviceable electrical fittings and S&F of new fittings (Thermostat, Indicator Lamp, 3 Pin Top 15 Amp, Heating element including necessary connection with PVC insulated copper cable as shown on drawing and as directed

S&F in repair, Gate valve(Brass) and GI Waste Pipe as per existing size and shape as specified in drawing and as directed

REPAIR TO BED HARD STEEL (FD/E6/MAP/08)

Removing of old paint and preparing surface by applying putty and one coat of red oxide after welding wherever required (legs/rails) and applying two coats of synthetic enamel paint black colour to match as per complete all as shown on drawing and as specified and directed

Removing of old/unserviceable Ply top from Bed Hard Steel and S&F of new 12mm thick BWR plywood of exterior grade and fixing the same with screws 4mm thick alongwith washers including S& F of new hard rubber shoes ( 4 Nos ) for each bed after removing the existing ones and as specified and directed

REPAIR TO CHAIR WRITING (FD/E6/MAP/12)

M&L for removing the old unserviceable back of Chair Writing and S&F of new back of same size made of 12 mm hot pressed plywood upholstered with fabric and moulded polyurethane foam 50mm thick with PVC lipping all around along with welding of metalic rail where ever required and shall be fixed to the rail with screws as specified and shown on drawing and as directed

M&L for removing the old unserviceable Seat of Chair Writing & S&F of new Seat of same size made of 12 mm hot pressed plywood upholstered with fabric and moulded polyurethane foam 50mm thick with PVC lipping all around along with welding of metalic rail where ever required and shall be fixed to the rail with screws as specified and shown on drawing and as directed

M&L for removing the old unserviceable Handles / Arm rest of Chair Writing & S&F of new Handles of same size shape made of black integral skin polyurethane reinforced with MS insert as specified and shown on drawing and as directed

M&L for removing the old unserviceable Cantilever type MS tubular frame of Chair Writing & S&F of new frame of same size shape and shall be fixed to chair writing steel as approved complete all as specified and shown on drawing

REPAIR TO CHAIR VERANDAH (FD -19 M/ FD-359)

Re-canning of chair verandah after removing the existing cane and to carry out necessary welding and repairs wherever required and painted with two coats of synthetic enamel paint over a coat of primer and weaving with new white plastic cane of approved quality with 3.5 to 4mm wide half round type for seat and back and fixing 04 Nos of hard rubber shoe/PVC shoes for legs of 20 mm dia after removal of old existing /unserviceable shoes complete all as shown on drawing and as specified and directed Note:- Cane shall be of plastic strips of superior quality ,type -I HDPE white or cream colour of uniform width conforming to IS-5387

REPAIR TO BOOK CASE STEEL LARGE (FD-1028)

M&L for denting / removing bends and removing the existing paint by applying chemical/aerosal spray and preparing the surface by applying putty and primer to bring out an even surface and applying a coat of synthetic enamel paint of olive green colour or any other colour/combination of colours to Book Case Steel Large complete all as specified and directed

S&F of new 5 mm thick glass and fitting with 1 mm MS sheet channel with roller for sliding doors including removing unserviceable/broken existing glass complete all as specified and directed

S&F in repair, 100 mm steel chromium plated handle complete as specified and shown on drawing and as directed

REPAIR TO TEAPOY VARANDAH (FD-255)

Removing old unserviceable Top and providing of new top made out of pre laminated particle board 18 mm exterior grade ISI marked teak face and PVC edging all around complete as specified and shown on drawing and as directed

M&L for removing existing paint and preparing the surface after applying putty and a coat of primer and Painting of Teapoy verandah with two coats of synthetic enamel paint (1st grade quality) white colour with glossy finish by spray machine and providing new hard rubber/PVC shoes after removing existing old/unserviceable shoes complete as specified and shown on drawing and as directed

REPAIR OF BOOK SHELF OPEN LARGE STEEL FD-69 (M)

M&L for denting / removing bends and removing the existing paint by applying chemical/aerosal spray and preparing the surface by applying putty and primer to bring out an even surface and applying a coat of synthetic enamel paint of olive green colour or any other colour/combination of colours to Book Shelf Open Large complete as specified and directed.

REPAIR OF BOOK SHELF OPEN SMALL STEEL FD-69 (M)

M&L for denting / removing bends and removing the existing paint by applying chemical/aerosal spray and preparing the surface by applying putty and primer to bring out an even surface and applying a coat of synthetic enamel paint of olive green colour or any other colour/combination of colours to Book Shelf Open Small complete as specified and directed.

REPAIR TO TRESTLE STORE ROOM STEEL FD-1043

M&L for removing dents and bends and existing paint ,preparing surface by applying putty and a coat of red primer and applying a coat of Synthetic Enamel paint (tint as drected) completeall as specified and as directed

REPAIR TO TABLE STEEL 900X600X760 WITH & WITHOUT DRAWER FD-1007/HFD 2014/FD 1008

M&L for removing dents and bends and welding wherever required for Table withour drawer Steel, Scrapping old painted surfaces and removing existing paint on surfaces with chemical/aerosal spray, Preperation of surfaces after applying putty and red oxide primer and spray painting of Table office clerk steel complete (inside and outside) with a coat of synthetic enamel paint as approved as approved and providing new hard rubber/PVC shoes after removing existing old/unserviceable shoes complete all as specified and as directed Colour :- Olive Green or any other colour or combination of colour as directed

Removing old unserviceable Top and providing of new top made of 18 mm thick pre laminated particle board exterior grade ISI marked teak face and PVC edging all around as specified and as shown on drawing complete all as specified and as directed.

S&F in repair, brass locks with duplicate keys best quality, suitable for Table Steel complete all as specified and as directed.

REPAIR COMBINED SINGLE SEATER STEEL SCHOOL DESK WITH SEAT & BACK (TP)

M&L for removing dents and bends and welding wherever required for COMBINED SINGLE SEATER STEEL SCHOOL DESK WITH SEAT & BACK, Scrapping old painted surfaces and removing existing paint on surfaces with chemical/aerosal spray, Preperation of surfaces after applying putty and red oxide primer and spray painting of Table office clerk steel complete (inside and outside) with a coat of synthetic enamel paint as approved as approved and providing new hard rubber/PVC shoes after removing existing old/unserviceable shoes complete all as specified and as directed Colour :- Olive Green or any other colour or combination of colour as directed

Removing old unserviceable Top and providing of new top made of 18 mm thick pre laminated particle board exterior grade ISI marked teak face and PVC edging all around as specified and as shown on drawing complete all as specified and as directed.

Removing old unserviceable Seat and providing of new seat made of 18 mm thick pre laminated particle board exterior grade ISI marked teak face and PVC edging all around as specified and as shown on drawing complete all as specified and as directed.

D.B ENTERPRISE

KIRAN REED INDUSTRIES