WELCOME MAINT AND OTHER MISC BR WORKS IN OFFRS MD ACCN AT KIRBY PLACE UNDER AGE BR I OF GE NORTH DELHI CANTT 10

Amount

Demolition of brick work including all quoins, arches, pillars, etc built in cement mortar complete all as specified and directed .

M&L for brick work in CM 1:6 straight or curved on plan exc 6.0m mean radius and using old size sub class 'B' bricks complete all as specified and directed.

All as per the description of srl item No 02 above but except bricks

M&L for brick work with sub-class "B' bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed.

Taking down brick tiles,terracing tiles or single layer APP from roof laid, bedded and pointed in any mortar all as specified & directed.

Demolition of mud phuska/cement concrete in roof any thickness, including plaster and leaping/whether full thickness removed or only a part thereof complete all as specified and directed.

M&L roughening surfaces of old concrete surfaces by picking sweeping, cleaning old surface and washing down with water to remove dust etc complete all as specified and directed.

M&L 40mm thick cement concrete type C -1, 1:3:6 (20mm graded crushed stone aggregate as in padding over roof complete all as specified and directed.

M&L 15mm thick screed in CM 1:3 finished even and smooth mixed with water proofing compound complete all as specified and directed. Note:- WPC shall be measured and paid separately

M&L for water proofing treatment on roof slab consisting with following operations:- (i) Existing surface shall be cleaned of all dust, fungus, moss and other foreign material etc by using wire brush & dusting, Apply a layer of bituminous primer conforming to IS 3384 @ 0.4 Litre/Sqm on the surface. Laying 3mm thick APP membrane having non-woven polyester matt at core and under surface coated with plastic polythene film. Laying shall be done using butane torch maintaining 100mm side overlap & 150mm end overlap, sealling all overlaps complete including treatment at all junctions & corners. The membrane shal be tucked into groove on vertical plane and groove sealed with cement mortar. The treatment shall be provided upto 200mm height above finished floor (Note- The membrane shall have tensile strength of 700N/5cm in longitudinal direction and 450N/5cm in transverse direction at 23 degree celcius, Flow resistance>120 degree celcius, dimensional stability, < 0.5% when tested as per ASTM D 5147. The laying of the membrane shall be done through authorized applicator of the manufacturers' (ii) Again applying hot bitumen 85/25 @ 1.2 Kg per Sqm over water proofing membrane. (iii) Dusting dry sand @ 0.75 Kg per Sqm and applying two coats of silver paint over the membrane. (iv) Prepration of surfaces and applying two coats of aluminium solar reflective paint of complete surfaces.

Disconnecting existing overhead tanks, setting aside or lowered if required for repairing, cleaning etc and hoisting if reqd reconnecting and refixing in position but capacity exceeding 250 litres and not exc 500 litres complete all as specified & directed.

Disconnecting existing overhead tanks, setting aside or lowered if required for repairing, cleaning etc and hoisting if reqd reconnecting and refixing in position but capacity exceeding 500 litres and not exc 1000 litres complete all as specified & directed.

S&F PVC(SWR) pipes, 75mm external dia double socketed in any length with rubber joints, fixed to walls etc with MS clamps including dismantling of cast iron, AC / PVC pipes including all fittings and accessories of 100/75 mm dia and in any position complete all as specified & directed.

S&F PVC (SWR) bends suitable for 75mm external dia with or without access door complete all as specified & directed.

S&F PVC (SWR) junction single, (single T&Y) equal or unequal with or without access door confirming to IS: 14735, suitable for PVC soil waste discharge pipe of 75mm dia complete all as specified and as directed.

S&F PVC (SWR) pipes, 110mm external dia, type-B, ISI marked (IS:13592) double socketed in any length with rubber ring joints, fixed to walls etc with ms clampsMS clamps including dismantling of cast iron, AC / PVC pipes including all fittings and accessories of 100/75 mm dia and in any position complete all as specified & directed.

S&F PVC (SWR) bends suitable for 110mm external dia with or without access door complete all as specified & directed.

S&F PVC (SWR) junction single, (single T&Y) equal or unequal with or without access door confirming to IS: 14735, suitable for PVC soil waste discharge pipe of 110mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl, 110mm bore complete all as specified & directed.

Preparation of old surface after complete removal of existing treatment applying 1mm thick wall care putty and making the surface smooth and applying two coats of oil bound distemper complete all as specified & directed. Note:- OBD shall be done with roller of required size instead of brush

M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying two coats of oil bound distemper complete all as specified and directed Note: OBD shall be done with roller of required size instead of brush.

M&L for complete removal of existing treatment and preparing surfaces plastered or uplastered surface and applying 2 coats of plastic emulsion paint over 1mm thick wall care putty complete all as specified and directed Note: Plastic emulsion paint shall be done with roller of required size instead of brush. .

M&L for two coats of colour wash on surface of wall including preparation of old plastered surface complete all as specified & directed.

M&L two coats of oil bound distemper on surface of ceiling including preparation of old plastered surface complete all as specified & directed.

M&L for preparation of old decorated external wall surface by sand paper of required sizes, filling wall care putty in holes existing or created, again sand papering thus making surface smooth and applying one coat of cement base paint complete all as specified & directed.

M&L for preparation of old decorated external wall surface by sand paper of required sizes, filling wall care putty in holes existing or created, again sand papering thus making surface smooth and applying two coats of cement base paint complete all as specified & directed.

M&L for preparation of old decorated external wall surface by sand paper of required sizes, filling wall care putty in holes existing or created, again sand papering thus making surface smooth and applying one coat of weather proofing exterior acrylic emulsion paint complete all as specified & directed.

M&L for preparation of old decorated external wall surface by sand paper of required sizes, filling wall care putty in holes existing or created, again sand papering thus making surface smooth and applying two coats of weather proofing exterior acrylic emulsion paint complete all as specified & directed..

M&L for one coat of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise descriped over 10cm width or grith complete all as specified and directed.

M&L for one coat of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise descriped over 10cm width or girth complete all as specified and directed.

Taking down cement or cement plaster on brick walls/ceiling etc including raking out joints, hacking for key, scrubing down with water etc complete all as specified and directed.

M&L 15mm thick rendering on brick or concrete surface in cement mortar 1:4 mixed with water proofing compound, surface finished even and smooth without extra cement complete all as specified & directed. Note:- Water proofing compound shall be measured and paid separately as supply only.

M&L for rendering 10 mm thick in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement

M&L 10mm thick rendering on concrete surface of ceiling in CM 1:3 finished the surface even and smooth without using extra cement complete all as specified & directed.

M&L for rendering 10mm thick in patches (not exc 3 Sqm each patch) in cement mortar 1:6 on other than fair face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement including taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed.

M&L for 10mm thick cement plaster on brick or concrete surfaces, as in ceiling / facia / chajja etc. in cement mortar 1:3 finished even and smooth without using extra cement including taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed.

Supply only integral water proofing compound.

Preparing new plastered surfaces of walls and applying two coats of cement base paint, over a coat of alkali resistant priming paint complete all as specified & directed.

M&L for two coats of weather proofing exterior acrylic emulsion paint on new plastered surface of over a coat of primer case on any type and any height wall/ roof boarder, drops, fins, chajja / roof facia, column etc, including preparation of surfaces complete all as specified.

Preparing new plastered surfaces of walls and applying two coats of oil bound distumper over 2mm thick wall care putty over over a coat of primer complete all as specified and directed

Preparing new plastered surfaces of Ceiling and applying two coats of oil bound distumper over 2mm thick wall care putty over over a coat of primer complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L non skid ceramic tiles coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 15mm thick cement mortar screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L for vitrified designer glazed coloured tiles 8-9mm thick (square/rectangular) , area of each tile n. exc 0.36 sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the surface including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L glazed digital vitrified tiles (DVT) colour and shed as approved in vertical surface of size 450x300x7-8 mm thick with highlighter set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface incl rendering 10mm thick in CM (1:4) and finished rough, complete all as spd & directed.

M&L granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match including moulding chamfered edges and driling holes to the gas pipes with shade of granite including dismantling, complete all as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not specifically provided for complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-1, (using 20mm graded crushed stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair including making joints at every 2.5m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in subase of floor, complete all as specified and directed.

M&L sand filing under floors or in foundations including watering and consoldation complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block of colour Red/Yellow glossy type any shape and size, as approved by Engr-in-Charge confirming to IS 15658-2006 of 60mm thickness, M-35 Grade over 40mm thick sand cushion with pigment complete all as specified and directed.

M&L coloured chequerred cement concrete tiles 30cm x 30cm x 25mm thick machine pressed set jointed and pointed with grey cement & pigments in neat cement slurry as in floors set in 15mm thick CM(1:6) including filling joints with white or colour cement complete all as specified and directed.

M&L cement concrete type B1 1:2:4 (20mm graded crushed stone aggregate in lintels upto 1.5m clear span cills, holdfasts, steps, seismic and other similar bands, plinth courses, string courses lacing courses parapets and railings upto 60cm in height copings, kneelers apex stones, bed plates, kerb not provided for water troughs and the like including weathering slightly rounded or chamfered angles and throating complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) of wooden/steel n.exc 1.5 sqm complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) of wooden/steel exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed.

S&F aluminium powder coated three track window (two shutters glazed & one shutters wire gauge) with frame, glazed with 4mm thick tinted glass and wire guage with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below:- (a) Frame (top & side) section shall of size 92.00x31.75x1.50mm. (Section No 21447) (b) Frame (bottom) section shall of size 92.00x31.75x1.50mm. (Section No 21446) (c) Top & side members of shutter section shall be of size 18.00x40.00x1.50mm. (Section No 21455) (d) Interlock Section of Shutter shall be of size 18.00x40.00x1.50mm. (Section No 21454) (e) Bottom Members of shutter section shall be of size 18.00x40.00x1.50mm. (Section No 20844), complete all as specified and directed. Note - The unit rate quoted by contractor includes cost of glass, wire mesh and all other connected accessories,

S&F factory made three track UPVC sliding windows white in colour or as approved made of extruded profiles with wall thickness of 2.3mm ((+/- 0.20mm) Windows profiles with hollows section with multichamber. Frame size (88mm x 52mm), Sliding sash (42mm x 67mm), sliding mesh sash (42mm x 57mm), sliding interlock(one vertical length in each shutter) 45.5mm x 28mm), glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all coeners, including drilling of holes for fixing of hardware and drainage of wateretc, making arrangement for fixing of hardware, EPDM, gasket, 1.2+/-0.20mm thick galvanised steelframe (30mm x 28mm) 2 Nos sliding sash (30mm x 18mm), sliding mesh (26mm x 10mm), profile to be inserted in required profile frame will be fixed to the wall with 8mm x 100mm long fastener hardware, (Touch lock of zinc alloyed (white powder coated), steel roller system stainless steel wire 0.36mm nominal dia of wire and average width of aperture 1.40mm, aluminium grill and required accessories), complete all as specified and directed. Note - The unit rate quoted by contractor including cost of float glass thickness not less than 4.00 and included all another connected accessories

S&F casement windows with net & MS Grill single or multi shutter turn window are made out of UPVC multi-cavity frames sections of 60x60x2.5mm suitably reinforced and double mult-shutters division are made by using sash mullion having 50mm x 64mm x 2.5mm multi-cavity UPVC section, suitably reinforced with GI and shutters are made out of 50mm x 85mm x 2.5mm UPVC section, reinforced and welded in corners with EDPM gaskets provision for glass and for air tight at frames and outer side of shutter with single glaze window shutters using suitable glass bead with perfect hardware like hinges handles, stays etc complete. Mosquito mesh shutter is made out of UPC extruded section of 61mm x 27mm x 2mm with GI channel of 1.2mm thick, welded in corners. Stainless steel wire mesh (Mosquito net) to be fitted in shutter with proper required accessories like hinges, MS grill of 12mm round or square bar are inserted in main frameas guard bar & screwed by hidden screwing system with powder coating and filled the gap between wall and frame with weather proof silicon sealant over backer rod of required size and of approved quality etc complete all as specified and directed. Make/Manufactruer:- Fenesta/ Winkraft/ Yashpoly/ Duraplast/ Accura (Accucel). Note - (Glazed shutters float glass thickness not less than 4.00 mm and wiremes shutter with stainless steel wire mesh 0.36 mm dia with aparature 1.4 mm shall also be deemed included in quoted rates and No extra payment will be made separately).

M&L 40mm thick, plain framed, flush shutters with block board core and plywood face panel, including beading commercial type both sides complete all as specified and directed.

S&F 35mm thick 2nd class HW glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc(with out sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc size of members as specified in SSR part-I, section 8, clause 8.24(a) complete all as specified and directed.

S&F galvanised mild steel wire cloth cut to size, 0.56mm nominal dia wire and average width of aperture 1.18mm and fixed with tinned tacks, including wooden beadig or galvanised wire staple complete all as specified and directed.

S&F in repair galvanised mild steel wire clothcut to size, 0.56mm nominal dia wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staple including wooden beading complete all as specified and directed.

M&L for two coats of synthetic enamel paint on new wooden surfaces over a coat of pink primer including preparation of surfaces of any description not otherwise descriped over 10cm width or grith complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & Bottom rails. MS frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or discription) from wooden frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Supply and fixing 3mm thick ordinary sheet glass and glazing with oil putty or wooden beading complete in squares not exc 0.50Sqm each pane complete all as specified and directed.

S&F in repair for gypsum ceiling board for ceiling prepainted, perforated finish, 600 x 600 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2mm thick G.I. Suspension wires spaced at 1200mm on main runners including making niches for fans/light, including dismantling of wall ceiling and boards, (fibere pulp, insulation etc or insulation boards of anythickness including cover fitllets. complete all as specified and directed.

Taking up or down 15mm dia steel tubing and connection including cleaning for refexing or removall to store complete all as specified and directed.

Taking up or down 20mm dia steel tubing and connection including cleaning for refexing or removall to store complete all as specified and directed.

M&L for steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15mm complete all as specified.

S&F steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenches complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20mm complete all as specified.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed.

S&F in repairs 500 ltrs capacity rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted of three layer and fixed in position including dismantling existing water tanks and removing to stores etc all as specified and directed.

S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity, ISI marked, double layered hoisted and fixed in position including connecting up pipes complete.

S&F ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 20 mm bore, fixed in repairs.(Min Wt 20mm- 210 gms)

S&F in repairs ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 15mm bore, fixed in repairs.(Min Wt 20mm- 210 gms).

S&F in repair oval wash basin white, flat bottom (sample as in MAP offrs accn) including brackets, waste fitting 32mm dia brass chromium plated push type coupling with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repair water closet squatting pan `Orissa pattern` 580mm x 440mm, white with integral foot rests and trap including fixing of flushing cistern, connection to trap, anti syphonage pipe etc including provision of lime concrete bedding complete all as specified and directed.

S&F in repairs vitreous China wash basin, white, flat back, padestal patern size 550mm x 400mm including chain, plug brackets, waste fitting 32mm dia ,brass chromimium plated for glazed ware sink, basin,with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified.

S&F in repairs 10 litre capacity PVC low level flushing cistern with dual flush type‘ white’ with inlet, float valve including bracket with 32mm dia PVC waste/flush bend pipe appx 600mm long complete all as specified and directed.

S&F in repairs snow white vitreous china EWC single peice type 700mm x 370mm x 645mm including seat cover and flush fittings complete fixed in floor with brass screw complete complete all as specified and directed. Make:- JAQUAR/ CERA/ Parryware/ Johnson Pedder

S&F in repairs EWC Seat cover Black/white colour as approved of PVC closed pattern with flat bottom and mild steel lchromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs CP hand spray (health faucet with 1.5m long easy flex tube in chrome finish and wall hook) complete all as specified and directed.

S&F chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed

S&F in repairs of quarter turn bib tap with wal flange for iron pipe of size 15mm bore chromium plated complete all as specified and directed

S&F in repairs chromium plate tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed

S&F in repairs plate rack made of stainless steel, 600mm x 750mm x 0.55mm including fixing as per manufacturers instruction complete all as specified and directed

S&F sheet Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long .

S&F Corner glass sheet assembly consisting of 5.5mm thick sheet glass corner 45cm wide both corner with chromium plated bracket guard and railing (with bracket) complete all as specified and directed

S&F in repairs 15mm bore CP sink mixer (wall mounted) with min 190mm long swivel spout, connecting leg and wall flange, complete all as specified and directed.

S&F brass CP centre hole mixer without pop-up waste system 15mm bore for mixing hot & cold water screwed down for iron pipe for Wash Hand Basin complete all as specified and directed.

S&F in repairs CP angle valve, high pressure, screwed ends for iron pipe or for unions of 15mm bore complete all as specified and directed

S&F in repairs CP wall mixer with provn for over head showers with 115mm long bend pipe on upper side connecting legs and wall flanges, complete all as specified and directed

S&F CP towel rack with 3 Nos hooks, 600mm long superior quality fancy type as approved by EIC complete all as specified and directed.

S&F in repairs mirror cabinet PTMT of 400mm x 500mm with magnatic locking arrengment fixed with and including wooden plug with CP brass screw complete all as specified and directed

S&F in repairs shower rose fancy type bass chromium plated 125mm heavy duty pattern with swivel joints type screwed for 15mm bore including jointing to pipe or unions complete all as specified and directed

S&F in repair nozzle type PVC connection pipe 600mm long and 15mm dia with brass fly nut at both ends complete all as specified and directed

S&F in repair CP stainless seel connection pipe 600mm long pemimum qualilty for geyser, urinal, WHB etc complete all as specified and directed

S&F in repairs CP hand spray (health faucet with 1.00m long easy flex tube in chrome finish and wall hook) complete all as specified and directed.

S&F in repairs CP towel ring complete all as specified and directed

S&F in repairs CP Toilet Paper Holder with cover complete all as specified and directed

S&F in repair 32mm dia bore low density polyethylene pipes (LDPE)of pressure rating 6kgf/cm2 fixed complete to walls,ceilings or in floors etc for WHB and sink complete all as specified and directed

S&F in repair 2 in 1 angle valve 15mm CP fancy pattern type cast copper alloy screwed for iron pipe or forbrass ferrule and fixed all as specified and as directed

S&F in repairs chromium plated jet for WC with 1.00m long PVC pipe including necessary fittings complete all as specified and directed.

M&L for 18mm thick PVC sheet for kitchen cabinet and cubboard consisting of carcass one side decorative lamination and other side balancing white fixed with approved adhesive and self tapping screws for kitchen cup board or wardrobe including dismantling of old boarding of any type complete all as specified and directed

M&L for 6mm thick PVC sheet for kitchen cabinet and cubboard consisting of carcass one side decorative lamination and other side balancing white fixed with approved adhesive and self tapping screws for kitchen cup board or wardrobe including dismantling of old boarding/sheet of any type complete all as specified and directed

S&F for 20mm wide & 1mm thick PVC edge beading pasted to edges of PVC furniture with suitable adhesive for kitchen cup board or wardrobe complete all as specified and directed

S&F stainless steel handle 100mm fancy type for cub board shutter complete all as specified and directed

S&F continuous (Piano) hinges, brass, 30mm width of flaps (when open). complete all as specified and directed

S&F soft close heavy duty slow motion hinge steel nickel plated, 4 hole mounting plate, half overlay adjustment height/ depth fixed in repair completed all as specifed and directed.

S&F soft close heavy duty steel nickel plated telescopic drawer channel size 20-25 inch long full extension load capacity 50 Kgs including fixing arrangement to drawer/ baskets etc completed all as specified and directed.

S&F in repair soft close heavy duty steel nickel plated telescopic drawer channel size 20 inch full extension load capacity 50 Kgs including fixing arrangement to drawer/ baskets etc completed all as specified and directed.

S&F mild steel magnetic catches and striking plate of 50mm size for kitchen cup board or wardrobe fixed with screw including letting in and fixed complete all as specified and directed

M&L Mild steel conforming to Fe 410-0 or Fe 310-0 in framed work such as door chowkhat, grills, gratings, ladder, hinges, door frame, desert cooler stand etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings, coolar stand and similar work complete all as specified and directed

M&L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed

Cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipes of capacity exceeding 250 ltrs and not exceeding 500 ltrs including by flushing out water, scrubbing with brushes cleaning with concentrated hydro chloric acid or caustic soda etc complete & finally washing with fresh water, including Marking or proper date of cleaning with white paint in 50mm of size of font with stencil over a coat of black paint complete all as spcified and directed.

All as per the description of srl item No 119 above item above but size exceeding 500 ltrs not exceeding 1000 ltrs

S&F in repairs door bottom seal (with metal strip and nylon brush) complete all as specified

S&F in repairs fancy type stainless steel curtain rods powder coated polished 20mm dia including brackets and finale and connected items complete all as specified and directed.

S&F stainless steel butt hinges medium weight cold rolled 100mm long complete all as specified and directed

S&F stainless steel tower bolt of extruded section and fixed lengtth of bolt 150mm complete all as specified and directed

S&F 250mm long SS sliding door bolt , complete all as specifid and as diredted

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, inclduing sink coupling, 40mm waste fitting overall size 1040mm x 510mm bowl size 510mm x 405mm x 203mm complete all as specified and as directed.

S&F in repairs stainless steel peg set of six sutable size of length complete etc.

S&F in repairs gun metal globe or gate valves, with iron wheel head screwed both ends for iron pipe of 20mm dia, all as specified and directed

S&F in repairs waste coupling( kitchen sink/WHB), 32mm dia, of PTMT (half or full threaded) complete all as specified and directed

S&F in repairs, two way angle valve cock chromium plated brass fancy type including CP flanges bore 15mm complete all as specified and directed.

S&F in repairs PVC waste pipe 800mm long suitable for 32mm dia waste coupling complete all as specified and directed

M&L for repair of wooden door/cup board and similar wooden work (Using planer, shaper and chiselling with manual or electric tools) complete all as specified and directed

M&L for repairs of water supply line of 15/20mm (Only outlet from water tank) including small fitting such as elbow, nipple, tee, reducer, bend and union of required size, complete all as specified and directed

Rohan Construction Company

DEEP ASSOCIATES

The new hut furnitures

VDM GROUPS

ANSH VANSH CONSTRUCTION COMPANY

Hanuman Promoters