ADDN/ALTN TO CERTAIN BLDG AND PROVN OF HARD STANDING AT CHAFB

Amount

COMMON ITEMS APPLICABLE FOR JOB 'A' & JOB 'B'

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out on hard/dense soil complete all as specified and directed.

M&L 75 mm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) of flint or quartzite stone spread, watered, rolled with 8 to 10 tonne power roller and consolidated to gradient and camber required complete all as specified and directed.

M&L PCC coloured interlocking (glossy finishing) paver blocks with grey cement and no pigments confirming to IS-15658-2006 of 60 mm thickness, M-35 grade as in hardstanding etc. laid over and including 50 mm thick screed or bedding layer of sand,complete all as specified and directed.

Excavating in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and getting out in hard/ dense soil for pipe trenches complete all as specified and directed.

Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25cm thick with approved soil obtained from excavation complete all as specified and directed.

Removing excavated soil not exceeding 50 metre and depositing at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.

S&F GI tubing of size 80 mm dia, medium grade, galvanized, in trenches or fixed on walls/ floors/ roofs etc with and including all connected GI fittings complete all as specified and as directed.

S&F MCCB 125 amps, 4 Pole, 415 volt, AC, fixed type, with breaking capacity 16 KA suitable for load line/ VTPN DB & connection complete all as specified and directed.

ITEMS APPLICABLE FOR JOB 'A'

M&L Plain cement concrete type D-2 1:4:8 (using 40mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L Brick work with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

M&L for Providing cement concrete type B1, 1:2:4 mix (20mm graded aggregate) in copings, as in manholes cover/ slab covers including necessary use and waste of form work complete all as specified and directed.

M&L Rendering 15mm thick on fair faces of concrete block masonry in cement concrete 1:4 in two layers first coat 10mm thick in CM 1:4 and second coat 5mm thick in CM 1:4 mixed with WPC @ 3% by weight of cement and finished fair and even complete all as specified and directed. Note : Water Proofing compound shall be measured and paid seperately.

Supply only Liquid water proofing compound complete all as specified and directed.

M&L for 10 mm thick rendering for fair faces of concrete surfaces on walls in CM 1:6 and finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing new plastered or unplastered surface of walls and applying two coats of Cement base paint on walls a coat of chalk primer through mechanical means complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primig paint complete all as specified and directed.

Taking down chowkats or frames area not exceeding 1.50 Sqm (w/o taking off shutters from frames) and removing from site complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level and removing material from site complete all as specified and directed.

S&F steel work in tubular truss including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 grade st 240 etc confirming to fe-410-W (Gde-E-250) quality-A and also incl fixing arrangements with dash fasteners screws wherever required complete all as specified as directed.

M&L Plain cement concrete 1:3:6 type C-2 (using 40 mm graded mechanically crushed stone aggregate) as in foundation filling and mass concrete for making base to the vertical members on roof etc. including necessary use and waste of formwork etc complete all as specified and directed.

S&F MS Roof trusses (framed), purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee angle, channel or flat sections as in wind ties etc.) including distance pieces, cleats etc. confirming to fe-410-W (Gde-E-250) quality-A complete all as specified and directed.

S&F Mild steel plain plates in available sizes (any thickness) confirming to Fe 410-W (Gde-E-250) quality-A as in base support to vertical members and support to horizontal members fixed to wall incl necessary welding etc complete all as specified as directed.

S&F Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members of weight not exc 4 Kg per Sqm, complete all all as specified and as directed.

M&L two coats of synthetic enamel paint on new steel surfaces over a coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth,complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet 0.50 mm thick of any colour having 550 Mpa tensile strength as in roof covering/cladding and fixed with self tapping screws, complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating (AZ-150) GI based plain steel sheet 0.50 mm thick of any colour having 550 Mpa tensile strength as in roof covering/cladding and fixed with self tapping screws, complete all as specified and directed.

S&F 8 to 9 mm thick Pre-painted gypsum building boards of size 595 x 595mm PVC laminated at back side of board insulation & acoustic purpose flat in ceiling fixed or laid / including powder coated GI snap grid of size 605mm x 605mm frame work using 36.50 x 23.50 x 1.5mm main Tee, 23.50 x 23.50 x 1.5mm cross Tee and 25x25x1.5mm angles for false ceiling with screws fixed to false ceiling including hangers 4 mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed. Note: The rates shall be inclusive of scaffolding and necessary arrangements all as specified and as directed.

S&F 100% Solid WPC (Wood Polymer Composite) solid Door Frames of cross section 65 mm x 125 mm (moulded) having single rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K-Value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk)and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 750 Kg/Cum , screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer prof, water/moisture proof & fire retardant & fixed in position with and including MS Hold Fast /Lugs/ SS Dash Fasteners of required dia and length, all as per specifications drawings as directed.. Note: 1) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made. 2) Material test certificate and authentication should be compoulsory provided by the manufacturing company.

S&F for 2nd class hard wood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S&F IInd class (hollow) hard wood factory made 35mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed.

S&F 100% Solid WPC (Wood Polymer Composite) solid Door Frames of cross section 45 mm x 70 mm (moulded) having single rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K-Value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk)and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 750 Kg/Cum , screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer prof, water/moisture proof & fire retardant & fixed in position with and including MS Hold Fast /Lugs/ SS Dash Fasteners of required dia and length, all as per specifications drawings as directed.. Note: 1) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made. 2) Material test certificate and authentication should be compoulsory provided by the manufacturing company.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N / m2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fie retardant WPC to be laminated with PVC foil of minimum 14 micron thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, complete all as specified and directed. (Note : Stainless steel butt hinges and necessary SS screws shall be paid separately).

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

Supply & fixed 150 mm long Extruded aluminium alloy handles, fabricated type anodised complete all as specified.

S&F 100 mm butt hinges, medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 100 mm long stainless steel butt hinges with galvanised MS hinge pin etc complete all as specified and directed.

S&F Alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified and directed.

S&F Double legged door stopper of overall length of cover plate 150 mm of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floors and rubber complete all as specified and directed.

S&F Aluminium Hat and coat hooks, solid body, 175mm to 250 mm complete all as specified and directed.

S&F MS helical door spring 300 mm long fixed with screws to wooden chowkhats or fixed with welding to steel chowkhats complete all as specified and directed.

S&F Steel windows box type ERW hollow 'P' section comprising double frame including gauged and glazed skelton shutter 30mm thick jointed internally with flat iron 25x3mm complete including hinges handle tower bolts, stops lugs,grill etc all as shown in drawing CEJZ TD -20 sheet 1/3 to 3/3 as applicable complete all as specified and directed. Note :- For the purpose of measurement & payment double shutter with frame and grill shall be considered as one unit. (ii) Glazing,wire mesh & painting shall be measured & paid separately.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, CP brass/ stainless steel screws, all complete as per architectural drawings complete all as specified and directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings complete all as specified and directed.

M&L for 12mm thick prelaminated (both sides with decorative choice) particle board, interior grade, fixed with screws or securing with beading for aluminium partition wk etc, complete all as specified and as directed.

M&L 5.5mm thick plain sheet glass, ordinary quality and glazing rubber beading in square exc 0.5 sqm in each pane complete complete all as specified and directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, ISI marked complete all as specified and directed.

S&F Galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staple or fixing with beads to wooden joinery when fixed in panels of joinery, complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in a square n exc 0.5 Sq m in each pane complete all as specified and directed.

S&F Powder coated aluminium ventilator fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clip,rubber packing, anodised aluminium snap beading, screw etc complete all as specified and directed.

S&F Anodised aluminium grill of (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with C.P brass / stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised alumiinium standard section around the opening, all complete as per requirement and dcomplete all as specified and directed.

S&F 4mm thick figured glass, ordinary quality and glazing rubber beading in square nexc 0.5 sqm in each pane complete all as specified and directed.

M&L Reinforced cement concrete 1:2 :4 type B1 using (20mm graded stone aggregate ) as in cooking platform slab supported on wall, beam, cantilevers and kitchen cooking platform including necessary formwork complete all as specified and directed.

M&L Reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in chajjas beams etc upto tripple storey bldgs including necessary formwork complete all as specified and directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed.

S&F TMT bars, 8 mm dia , cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

M&L for 25mm thick PCC type B-1, 1:2:4 (using 20mm graded aggregate) as in sub base complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, over and including cement screed bed 15 mm thick in cement mortar 1:6 base including rubbing and mirror polishing, and half nose moulding (bull nosing) etc, complete all as specified and directed.

All as per item 60.00 here-in-before but pre-polished kota stone as in vertical surfaces such as skirting and risers over and including 10mm thick plaster in cement mortar 1:4 on brick work or concrete surfaces, complete all as specified and directed.

M&L Non - skid White Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and inted in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

All as per item 62.00 here-in-before but in skirting to walls including 10mm thick cement plaster in ement mortar 1:4 as backing coat on fair faces on stone surface complete all as specified and directed.

M&L Coloured Glazed ceramic tiles in vertical surface 450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick cement plaster in cement mortar 1:4 as backing coat on fair faces on stone surface complete all as specified and directed.

M&L Granite work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, counter basins, urinal partitions etc. and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble shade of following types and including 15mm thick screed bed in cement mortar 1:6 set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces and half nose moulding (bull nosing) etc, complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks white tripple layered (cylindrical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks white tripple layered (cylindrical vertical with closed top) capacity 500 Ltr hoisted and fixed in position complete all as specified and directed.

S&F Vitreous China W.H.B. white oval shape counter sunk type of size 570 x 445 mm including waste coupling, waste pipe and brackets etc complete all as specified and directed.

S&F 15mm bore pillar tap, fancy type, chromium plated cast copper alloy with capstan head, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks complete all as specified and directed.

S&F 15mm Bib tap screwed down high pressure, cast copper alloy,fancy type, ISI marked, with crutch or butterfly handles screwed down suitable for bore pipe or union, complete all as specified and directed.

S&F Angle cock 15mm dia chromium plated, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or unions, complete all as specified and directed. (Note : Weight of cock shall not be less than 0.575kg)

S&F Glass shelf assembly consisting of made out of 5.5 mm thick glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F for CP brass Soap Dish Holder, complete all as specified and as directed.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings 16mm dia bore on walls/ceiling or laying in floors or fixing as in concealed to walls or in floors etc, and making good the surfaces matching to exsiting surfaces of walls/ floor to the complete all as specified and directed.

S&F GI Tubes 20mm bore, 'medium grade', galvanised, with all fitting; laid in trenches and fixed complete to brick/stone wall or laid in floor concealed, complete all as specified and as directed.

S&F PVC connections 45cm long including 15mm bore PTMT nuts on both ends complete all as specified and directed.

S&F PVC (SWR) floor trap 75/110mm dia, with SS grating including jointing to waste pipe fixed in cement concrete type B1 1:2:4 complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bends any radius 75mm dia complete all as specified and directed.

S&F PVC (SWR) bends any radius 110mm dia complete all as specified and directed.

S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia complete all as specified and directed .

S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm dia complete all as specified and directed .

S&F PVC (SWR) vent cowl 75mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm dia complete all as specified and directed .

S&F stack clamps out of 40mm x 4 mm flat iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100/75mm bore etc complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement including jointing to waste pipe fixed in cement concrete type-B-1 1:2:4 using 12.5mm brick aggregate complete all as specified and directed.

M&L 300x300x20-25mm thick chequered cement concrete tiles rubberised moulded with grey cement and pigment set, jointed and pointed in neat cement slurry including laid over a screed bed of 20 mm thick in cement mortar 1:6 complete all as specified and directed.

Removing building materials etc, (other than spoil like bricks, stone, aggregate, stone slabs etc.) to a distance of upto and incl 2000m, including loading, unloading and stacking at the destination, as in manholes cover/ slab covers complete all as specified and directed.

S&F in repairs 18/19mm thick block board ,grade 2 quality interior grade , commercial type fixed with screw to timber frame work including taking down complete all as specified and directed.

M&L Decorative laminate type 1 of 0.9 mm thick surface finish, colour and pattern as approved, fixed with approved adhesive as manufacturer's complete all as specified and directed.

S&F Continious piano hinges, continuous type of mild steel bright finish or electro galvanized with width of flap (when open) 30mm complete all as specified and directed.

S&F 75mm long Brass handle, cast type, polished bright fixed with nut and screws to cupboard shutter complete all as specified and directed.

S&F Magnetic ball catches with 8mm dia steel ball brass body and striking plate including letting in and fixed,complete all as specified and directed.

Shifting and installation of existing steel grease trap in foul condition incl taking out & also taking out old sludge etc and re-fixing including and all plumbing work necessary excavation, providing concrete bed 100mm thick ,construction of wall @ floor level using hollow bricks and covered with 5-6mm thick chequered plate etc and connection to existing line etc complete all as specified and directed.

M&L Cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in concrete bed to drain pipes 200mm internal bore including packing under and haunching against the sides of pipes after they are laid and tested,complete all as specified and directed.

Demolition and breaking up drain pipes , 200 mm dia (Salt glazed stone ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

M&L Salt galzed stone ware drain pipe , grade 'A' of 200mm dia laid in trenches and jointed including all accessories & fittings complete all as specified and directed.

M&L Plain cement concrete 1:2:4, type B-2 using 40 mm graded stone aggregate as in surface channel, drain,complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc all as specified and as directed.

M&L for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC concealed conduit of 20mm dia or higher, medium grade complete with all PVC conduit accessories, including metal flush box of 1.60 mm thick suitable for modular switches/ sockets/fan regulators incl modular white cover plate and modular metal flush box with frame of required modules with blanking plates, brass screws, cup washers etc including all cutting / chases etc in stone/ brick masonary/ walls, pinning in stone walls / brick walls and pointing in cement mortar 1:3 to ends or edges of landing etc for concealed conduit using heavy duty stone drilling/cutter machine and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :-

One light point controlled by one, one way switch 06 Amps

One wall/ceiling fan point controlled by one, one way switch 06 Amps

One exhaust fan point controlled by one, one way switch 06 Amps

One 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch

One 3 pin, 06 Amps socket outlet point on same board controlled by one way 06 Amps switch

All as per Sl item No 102.00 above but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed

All as per Sl item No 102.00 above but point wiring with 4.0 Sqmm single core FRLS cables and earth continuity wire of 4.0 Sq mm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed

S&F modular switch, 10 Amps, single pole, one way, 230 volts, one module complete all as specified and directed

S&F modular switch, with indicator, 16 Amps, single pole, one way, 230 volts complete all as specified and directed

S&F modular socket outlet 05 Pin, 06 Amps, 02 module with shutter complete all as specified and directed

S&F modular socket outlet 02 in 01, 03 pin, 16 Amps, 02 module with shutter complete all as specified and directed

S&F ceiling rose, 65 x 50 mm surface type with 3 terminals incl connection complete all as specified and directed

S&F surface/wall mounted LED batten, robust extruded aluminium housing and intigrated electronic drive 20 watt, 4 feet, with accessories including connection with 2 core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed

S&F Sheet metal enclosures with socket plug top and MCB, Single pole & neutral enclosure with a 2 pin & earth plug & socket complete with one single pole MCB 20 amps, 'C' curve incl connection complete all as specified & directed

S&F Sheet metal enclosures with socket plug top and MCB, tripple pole & earth enclosure with a 3 pin & earth plug with socket complete with one triple pole MCB 63 amps, 'C' curve incl connection complete all as specified & directed

S&F Exhaust fan 380 mm sweep heavy duty, steel body, AC, single phase 230 volts, 50 Hz, with blades, frame and louvers shutter with necessary hole drilling in wall and making good the disturbed surfaces including connection complete all as specified and directed.

S&F ceiling fan complete with three blades,down rod, accessories 230 V, 1200 mm sweep, min air delivery 210 CFM, BEE 5 star rated with brushless direct current motor includig connection complete all as specified and directed.

S&F Ceiling fan regulator, stepped type of 0 to 04 rotary steps, electronic, 02 module, humfree, AC, 230 volts, 100 watts complete all as specified and directed.

S&F Water heater storage type (geyser), capacity 25 litres, 230 volt, AC, BEE 5 star rated, to be fixed on wall with suitable size of nut/ bolt / fasteners and washers incl making good the disturbed surfaces of wall incl necessary cold and hot water connection with 02 Nos heavy duty connection pipe of SS rope threaded type with brass unions at both ends, 45 cm long, 15mm bore complete all as specified and directed

S&F Wall fan, 400 mm sweep, 230/240 Volt, single phase, 50 watt, 1320 rpm, air delivery 70 CMM, oscillating type, 3 speed push button control, to be fitted on wall with necessary arrangements incl connection complete 2 module, hum free, AC, 230 volts, 100 watts complete all as specified and directed.

M&L for sub main wiring with 2.5 Sqmm nominal cross sectional area, two single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable with and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit not less than of 20mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting / chases etc in stone/ brick masonary/ walls and making good to the disturbed surfaces to match the existing complete all as specified and directed. Note-Two runs of 2.5 sqmm single core cable and one run of 2.5 sqmm earth wire including PVC conduit together shall be measured as one unit.

All as per sl item No 118.0 above but for 02 x 10.0 Sqmm for phase & neutral and 01 x 10.0 Sqmm for continuous earth wire in 20 mm PVC conduit complete all as specified and directed. Note-Two runs of 10.00sqmm single core cable and one run of 10.00 sqmm earth wire including PVC conduit together shall be measured as one unit.

All as per sl item No 118.00 but for 04 x 10.0 Sqmm for 3 phase & neutral and 01 x 10.0 Sqmm for continuous earth wire in 25 mm PVC conduit complete all as specified and directed.. Note-Four runs of 10.00 sqmm single core cable and one run of 10.00 sqmm earth wire including PVC conduit together shall be measured as one unit.

All as per sl item No 118.00 but for 04 x 16.0 Sqmm for 3 phase & neutral and 01 x 16.0 Sqmm for continuous earth wire not less than in 32 mm PVC conduit complete all as specified and directed. Note-Four runs of 16.00 sqmm single core cable and one run of 16.00 sqmm earth wire including PVC conduit together shall be measured as one unit.

M&L for Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground(earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below normal ground level, connected to galvanised iron wire 4 mm dia as earth lead up to test point with suitable size GI nuts/bolts, washers,check nut and brazed properly up to main board,LT panel etc and adequate quantity of charcoal and salt 15 cm around the earth plate including earth pit in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregates,40mm thick precast RCC cover in 1:2:4 reinforced with 8mm dia TMT bars 3 Nos both way including CI cover 10 mm thick with hinged and frame of angle iron 25x25x6mm with 6mm dia MS bar handle made to shape, excavation and earth work in any type of soil and including medium grade GI watering pipe 20mm bore with funnel and wire mesh and medium grade GI protection pipe 15 mm bore up to main board complete all as shown in electrical plate no 3 of MES schedule Part-I , connected to earthing testing point and testing on completion ,complete all as specified and directed. Note: (i) The unit rate includes 15 mm dia GI pipe up to 7.5m for protection of earth lead. (ii) The unit rate includes galvanised iron wire 4 mm dia from earth electrode to test point up to 7.5 meter (iii) In case measured value of earth resistance of each earthing is recorded more than 3 ohms then the earthing shall be re done by the contractor without any extra cost to the department.

M&L for Earth Continuity Conductor or main earthing lead fixed to wall on batten or recess or chasis or buried in ground or drawn in conduit / pipe or fixed for earthing etc. of size 4.00 mm dia galvanised iron or steel wire complete all as specified and directed.

S&F sheet metal enclosure distribution board triple pole and neutral (VTPN DB), AC, 440 volts, 06 ways with 200 Amps rated copper bus bar and metal double door, IP 43 protection, suitable for one MCCB 4 pole 100/125 amps as incomer and MCB SPs as outgoing along with cable end box for above DB and concealed flush to wall including all cutting chases / civil work on wall as required including connection and taking down old unserviceable DB complete all as specified and directed. Note : (i) MCCB & MCB s shall be measured and paid seperately.

All as per item No 124.00 above but 8 way TPN DB complete all as specified and directed.

S&F sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 08 way, with 200 Amps rated copper bus bar and double door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting / civil work etc in wall as required complete all as specified and directed.

S&F MCCB 100 amps, 4 Pole, 415 volt, AC, fixed type, with breaking capacity 16 KA suitable for load line/ VTPN DB & connection complete all as specified & directed rating

S&F MCB TPN 63 amps, 415 Volts, AC of breaking capacity 10 KA, 'C' curve and connections by using suitable copper lugs complete all as specified & directed

S&F MCB SPN 40 amps, 240 Volts, AC of breaking capacity 10 KA, 'C' curve and connections by using suitable copper lugs complete all as specified & directed

S&F MCB SP, AC, 240 volts of 06 to 32 Amps capacity "B" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed

S&F DOL Starter 3 Phase, 415 volts, 3 HP rating for starting of pump incl connection complete all as specified & directed

S&F Energy saving LED flood light fitting 80 watts, die cast aluminium IP 66 comprising with electronic driver and all accessories pre-wired incl connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections and 50 mm bore light grade G. I. tube mounting bracket of 1.5 meter in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete all as specified & directed

S&F Energy saving security light fitting of 35/36 watts LED pressure die-cast aluminium IP 66 roadway luminaire with high power LED as light source comprising with electronic driver and all accessories pre-wired incl connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections and 50 mm bore light grade G. I. tube mounting bracket of 1.5 meter in length, bend to shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete all as specified & directed

Supply and laying in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 Sqmm 3.5 core complete all as specified & directed. (Note :- Excavation & earth work, sand cushioning, bricks protection & GI pipe where required shall be measured & paid seperately)

Supplying and laying un-reinforced precast concrete cable cover, class LV, Type I, flat, size 250mm x 150mm x 40mm complete all as specified & directed.

M&L sand filling (pulverized stone dust) for sand cushioning incl spreading & levelling for protection of cable complete all as specified & directed.

S&F MCCB enclosure solid neutral link for fixing of 4 pole MCCB 125 amps, TPN, 25 KA complete all as specified & directed.

S&F GI steel tubing , medium grade, galvanized, in trenches or fixed on walls/ floors/ roofs etc with and including all connected GI fittings complete of following sizes :-

50 mm dia

25 mm dia

S&F Gun metal gate valve, heavy duty, screwed both ends with iron wheel head suitable for GI water tubing including provision of necessary unions, nipple, collar etc. along with GI unions, nipple and collar including cutting the old threaded portion of GI pipe and making new threading in position of following sizes :-

50 mm bore

25 mm bore

S&F Sluice valve 80mm dia, cast iron body with brass spindle, class-1, ISI marked, PN-1.0, both end flanged and drilled and fixed with bolts and nuts and washers including providing rubber insertion of suitable thickness complete all as specified & directed.

M&L Construction of brick masonry valve chamber, in replacement of old valve chamber of size 900 X 900 X 900 mm internal size with the following specifications complete all as specified & directed:- (a) Demolition of existing dilapidated valve chamber of internal size 900 x 900 x 900mm including taking out chamber cover. (b) Foundation in PCC 1:4:8, type D2 using 40mm graded stone aggregates to a size of 1560 x 1560 x 100mm thick. (c) Brick masonry walls, 230mm thick, built in cement mortar 1:4. (d) Coping over brick masonry walls in PCC 1:2:4, type B1, using 20mm graded stone aggregates, 75mm thick. (e) Rendering in CM 1:4, 15mm thick to internal surfaces and 150mm alround the external surfaces. (f) 3 mm thick MS sheet cover fixed to MS frame work made of 50x50x6mm thick angle iron with suitable MS hinges including providing of locking arrangement. (g) Painting steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer.

All as per item no. 141.00 above but for brick masonry valve chamber of size 750 X 750 X 750 mm complete all as specified & directed.

M&L for cutting cast iron pipes in position for insertion of new fittings or for carrying out repairs of sizes of 80/50 mm pipes complete all as specified & directed.

GKR and CO (BID ID -3393538)

M/S J S PRAKASAM (BID ID -3392881)

K V RAJANNA (BID ID -3401536)