Providing aluminium partition for Digital laboratory at E and E Dept. and other petty civil works of IT Department in NITK

Amount

Two legged scaffolding for removing and cleaning of vegetation growth in external walls: Providing two legged scaffolding for removing and cleaning of vegetations growth in wall using 10-15cms dia bes quality casurina poles of 4mtr over length ( 3m+0.5m projection +0.5m projection+0.5m in to the ground) the distance between two rows being 1.25m and spacing of posts being 2m in both rows with 2 horizontal posts with 0.5mm over lap on either side and braces at 2m c/c including longitudinal and transverse middle braces to step up and providing platform with casurina poles forms tied up using coir rope complete etc. as per specification.:

In Ground Floor

In 1st Floor

In 2nd Floor

In 3rd Floor

In 4th Floor

In 5th Floor

In 6th Floor

Cleaning and washing wall surface: Cleaning and washing the wall surface with soap, soda, water including cost of materials, labour complete as per specifications (In all the floor levels)

Dismantling granite/ceramic/ vitrified/ mosaic tile flooring: Dismantling granite/ceramic/ vitrified/ mosaic tile flooring, removing and transporting the debris with all lead and lift (within the campus) , stacking the materials available for re-use at departmental store including transportation charge etc complete (In all the floor levels)

Dismantling Laterite masonry: Dismantling laterite masonry in cement mortar; removing, transporting and disposal of the debris with all lead (within the campus) and lift; stacking the materials available for re-use at departmental store including transportation charge etc complete.

Cement concrete Solid blocks: Providing and constructing load bearing wall with solid concrete block density not less than 1800 kg/m3 having a minimum average compressive strength of 4.00 N/mm2 confirming to IS 2185 ( Part 1 ) : 2005 and constructed with CM 1:4, as per IS 2572:2005 including cost of all materials labour charges, scaffolding, curing, hire charges of machineries etc. complete as per specifications with solid blocks of size 400 x 100 x 200mm.

In 4th Floor

In 5th Floor

In 6th Floor

CC flooring : Providing and laying flooring 40mm thick, with an under layer of 30mm thick M-15 cement concrete, using broken granite metal of 12.5mm nominal size and top layer of 10mm thick plaster with cement mortar 1:3, finished with floating coat of neat cement, including cost of materials, labour, curing, complete as per specifications.

In 4th Floor

In 5th Floor

In 6th Floor

CM 1:4 – 15 mm plastering : KSRB 15.3.5: Providing 15mm thick cement plaster in single coat with cement mortar 1:4, to stone masonry / Concrete surface including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labours, coring complete as per specifications

In 3rd Floor

Flooring with Ceramic tiles: Providing Ceramic tiles of approved make, shade and colour for flooring, skirting, treads of steps and landings laid on a bed of 12mm thick cement mortar 1:3 mix, flush pointing white cement using colour pigment, including cost of materials, curing, labour complete as per specifications – 400x400 mm size tiles Nitco/ Naveen/ Kajaria/ Johnson/ Regency/Somany or equivalent make )

In 4th Floor

In 5th Floor

In 6th Floor

Colour glazed tile dadoo : Providing skirting, dado, rises of steps with colour glazed tiles 6mm thick on 10 mm thick cement plaster 1:3 and jointed with white cement slurry over rough plaster surface using glazed tiles of approved make and size including cost of materials, labour complete as per specifications. Tiles of Nitco/ Kajaria/ Regency/ Johnson/ equivalent make – Specification No. KSRB 14.16/ KBS 14 -17

In 4th Floor

In 5th Floor

In 6th Floor

Nahni trap: Providing and fixing PVC Nahni trap (Prince make/ equivalent) of approved quality and make and fixing in M15 and plastered with CM 1:3 wherever necessary , including cost of materials and fixtures and vonveyance of materials to work spot – 10 x 7.50 cms size.(4th 5th & 6th Floors)

Colour anodized Aluminium partitions: Providing, fabricating, assembling and fixing in position aluminium partition using 101.60mm x 44.45mm x 3.18mm aluminium, mat finish or glossy finish, anodized sections combination of plain, single groove and double groove members should not exceed 0.60m c/c and bottom member of required lengths, joints mitred and corner grinded sub dividing assembled frame should be stiffened with corner angles. Stripped and fixed with screws rawl plug and teakwood guttas to RCC column or masonry on sides. RCC lintels or beams at tops and mosaic floor at bottom; including cutting chistelling and making good with cement mortar to match the surface. Providing and fixing 12mm thick prelaminated sheet (Ecoboard - exterior grade ) of approved colour for bottom panel of maximum height 0.90m, and 5.50mm thick plain or pin headed glass for middle panel and top panel with glazing clips of 19.05mm x 17.30mm.1.00mm . All the aluminium sections used should be treated for removal of any rust and prevention of futher rust formation and coated with greasy materials for non adherence of mortar or any other sticky materials:The vertical members should be embedded in the flooring by making suitable size holes and fixing with cement motar. All the frame should be thoroughly cleaned free from rust, scale or dirt. Work should be carried out as per direction of engineer-in-charge of the work with all lead and lift as per chief Architect’s drawing etc., complete to a degree of perfection.-using aluminium section anodized to 12-15 microns.

In 1st Floor

In 2nd Floor

Colour anodized Aluminium partitions with Deco grill: Providing, fabricating, assembling and fixing in position aluminium partition using 101.60mm x 44.45mm x 3.18mm aluminium, mat finish or glossy finish, anodized sections combination of plain, single groove and double groove members should not exceed 0.60m c/c and bottom member of required lengths, joints mitred and corner grinded sub dividing assembled frame should be stiffened with corner angles. Stripped and fixed with screws rawl plug and teakwood guttas to RCC column or masonry on sides. RCC lintels or beams at tops and mosaic floor at bottom; including cutting chistelling and making good with cement mortar to match the surface. Providing and fixing 12mm thick prelaminated sheet (Ecoboard - exterior grade ) of approved colour for bottom panel of maximum height 0.90m, and 5.50mm thick plain or pin headed glass for middle panel and top panel with glazing clips of 19.05mm x 17.30mm.1.00mm . All the aluminium sections used should be treated for removal of any rust and prevention of futher rust formation and coated with greasy materials for non adherence of mortar or any other sticky materials: The vertical members should be embedded in the flooring by making suitable size holes and fixing with cement motar. All the frame should be thoroughly cleaned free from rust, scale or dirt. Work should be carried out as per direction of engineer-in-charge of the work with all lead and lift as per chief Architect’s drawing etc., complete to a degree of perfection.-using aluminium section anodized to 12-15 microns.

In 1st Floor

In 2nd Floor

Aluminium door : KSRB 7.16: Providing, fabricating, assembling and fixing in position aluminium shutters to the existing door frame in the partition using 47.62 x 44.45mm section thickness 3.18mm, weight 1.505kg/m for vertical frame, 47.62x44.45 thickness of 3mm, weight 1.42kg/m for top section, 49.91mm x44.45mm with wall thickness 3mm weight 1.495kg/m for central rail; and 114.3mm x 44.45mm thickness 3.18mm, weight 2.646kg/m for bottom rail; aluminium sections and cut to length joint metred and corners grinded, the bottom rail and top rail hinged or pivoted, opening arrangements including providing and fixing standard approved accessories, such as aluminium handles, tower bolts, lock, pivots: hinges PVC. Or rubber gasket, 12mm prelaminated sheets (Novopan) exterior grade of approved colour both sides same colour for bottom panel of maximum height 0.90m and 5.5mm thick plain glass for top panel (Novopan) and glass fixed with glazed clips 19mm x17.3mmx11mm, 0.9mm thick, weight 0.124kg/m; aluminium sections treated for removal of any rust and prevention of further rust formation, and coated with greasy materials for non-adherance of mortars or any other sticky materials, including cost of materials, fixtures, labour and HOM of machinery complete as per specifications.- using aluminium section anodized to 12-15 microns.

In 1st Floor

In 2nd Floor

Colour anodized three track aluminium glazed windows: Providing and fixing in position colour anodized aluminum windows and ventilators as per approved drawings with sliding shutters using three track window frame of size 92 x 31.75mm bottom section 1.3mm thick, weight 1.07 kg/m; sides and top sections 1.3mm,thick, weight 0.933 kg/m. shutter frame section comprising top and bottom section of size 40mm x 18mm, wall thickness 1.25mm, weight 0.417 kg/m, shutter interlock section 40mm x 26.7mm wall thickness 1.1mm, thick, weight 0.469 kg/m the shutter mounted on nylon rollers with approved quality of fixtures such as aluminium handles tower bolts etc., providing and fixing 5.5mm thick plain glass for shutters fitted with rubber beading all aluminium sections anodized 12 to 15 micons thick including cutting to required length, joints mitred subdividing the frame tennoned and riveted, in the assembled frame, stiffened with end clips for corners, angles etc., and fixed to the walls, lintels, floor beams / cills as the case may be, with necessary steel screws, rawl plugs or teak wood gutties including cutting masonry or concrete and making good the original surface using cement mortar, aluminium pretreated for removal of any rust and protection of further rust formation and coated with the greasy materials for non-adhesion of mortar and any other sticky materials, (this coating should cleaned after installation) including cost of materials, fixtures, labour and HOM of machinery complete as per specifications

In 3rd Floor

Painting to steel work: Providing and applying enamel metal paint, two coats, (excluding priming coat) over new steel of other metal surface, brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter including cost of all materials, labour etc., complete as per specifications. – Asian Apcolite Premium satin enamel/ Nerolac/ Berger or equivalent In 3rd & 4th Floor

Wash basin: KSRB 11-11.4: Providing and fixing white vitreous china clay, flat back wash basin size 550x400mm with a single 15mm C.P brass pillar tap, fixed with C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern, waste pipe, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. KBS 11 Parryware / Hindware / Cera/ equivalent make - In 1st Floor

Angle Cock – 15 mm size: Providing and fixing Jaquar / Parryware Tiger / equivalent other make Angle Cock of 15 mm size including cost of all materials, labour, transportation, taxes etc complete In First Floor

Connection pipe: Supplying and fixing connection pipe of 0.60m length of approved make as per direction of engineer in charge, including the cost of materials, labour, lead and lifts, fixtures etc., complete as per specifications. - In First Floor

PVC pipe – 63 mm dia – 6kgf/ sqcm class: Providing and fixing in wall, ceiling and floor PVC pipes 6.00 kgf/sqcm working pressure 63 mm outside diameter conforming to IS specification with fittings such as elbows, bends, couplings, wall clips/ brackets, making good the wall ceiling or floor including cost of all material, labour charges, HOM of equipment and testing etc complete as per specification. - In First Floor

CPVC plumbing pipes – 20 mm dia: KSRB: 13.86: Providing and fixing Chlorinated poly vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (internal works exposed to wall) - 20mm nominal (Outer dia.) pipes- In First Floor

BHARATESH V KULAL

Puneeth constructions

M/s Durgaparameshwari Infrastructures