Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.1 LAccepted-AOC VILL TUTNYU PO PS LAZU KHONSA DISTRICT TIRAP PIN 792130 ARUNACHAL PRADESH | KHONSA | TIRAP | ARUNACHAL PRADESH | 792130 | L1 | Accepted-AOC DUE TO QUOTED RATE IS L1 | |
| 2 | L2₹16.4 L+₹1.2 L (7.97%)Rejected-Finance | L2 | Rejected-Finance DUE TO QUOTED RATE IS HIGH |
Tender Value
₹15.3 L
EMD Value
₹30,600
Closing Date
24 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Lekhapani
GE Lekhapani, Tinsukia, Assam
ADDN/ALTN IN THE BATHROOM OF OTM IN BLDG NO P-38 AND CERTAIN MINOR WORKS AT LEKHAPANI MIL STN
2022_MES_537992_5
8671/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE Lekhapani
Class E Category a (I)
4 documents required · 4 mandatory
₹500
GE Lekhapani
₹30,600
Yes
27 Jan 2023
26 Nov 2022
27 Dec 2022
26 Nov 2022
24 Dec 2022
5 Dec 2022
Amount
Surface Excavation not exceeding 30cm deepand averaging 15cm deep and getting out in soft / loose soil for roads to required slope gradient, chamber etc complete all as directed
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation getting out in soft/ loose soil complete all as specified and directed.
Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm of soft/ loose soil complete all as specified and directed.
Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
M&L PCC (1:4:8), type D-2, (using 40mm graded stone aggregates) as in foundations, filling, mass concrete etc complete all as specified and directed.
M&L Providing RCC M-25 (Design mix), (using 20mm graded stone aggregate) as in as in foundations, plinth beams, bases for columns, etc complete all as specified and directed
M&L Providing RCC M-25 (Design mix), (using 20mm graded stone aggregate) as in as in columns, pillars etc complete all as specified and directed.
M&L Providing RCC M-25 (Design mix), (using 20mm graded stone aggregate) as in as in beams, cantilevers beressummers lintels over 1.5m length and the like etc complete all as specified and directed.
Use and waste of formwork to sides of concrete foundation, footings, base of coloumns, raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished flat surfaces of concrete complete all as specified and as directed.
Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels. Cantilevers, shelves including supports, overhangs, etc also splays between floor and beam etc for rough finished flat surfaces of cocrete complete all as specified and as directed.
Use and waste of formwork to sides of pillars, posts, struts, piers, coloumns and stanchions for rough finished flat surfaces of concretecomplete all as specified and as directed.
M & L Sand filing under floors or in foundations incl watering and consolidation complete all as specified and directed.
M&L PCC (1:2:4), type B-12, (using 20mm graded stone aggregate) as in bed plates and similar articles including necessary form work complete all as specified and as directed.
M&L Cutting chases in brick walls, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc and making good, cutting exceeding 10 cm and not exc 20 cm girth complete all as specified and as directed.
Taking down chowkat or frame with shutters (without taking off shutters from the frame) not exceeding 1.5sqm each and making good to disturbed surfaces and removing from site of work complete all as specified and as directed by the Engineer-in-Charge.
Taking down chowkat or frame with shutters (without taking off shutters from the frame) exceeding 1.5sqm but not exceeding 4.0sqm each and making good to disturbed surfaces and removing unserviceable materials from site of work complete all as specified and directed by the Engineer-in-Charge.
S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having maximum density of 650 kg/Cum and screw withdrawal strength of 1800N (Face)& 900N (Edge), minimum compressive strength 50N/Sqmm, modulus of elasticity 800N/sqmm and resistance to spread of flame of class A category withproperty of being termite , norer proof and , water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star head counter sunk SS screws, all as per direction of Engineer-in-charge.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door / windows / Ceosetory windows & other frames/Chowkat of size 50x100mm comprising of virgin PVC polymer of K valve 58-60 (Suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having mimimum frame density of 750kg/cum, screw withdrawal strength of 2200N (Face) & 1100 N (Edge), minimum compressive strength of 58N/Sq mm, modulus of elasticity 900 N/ Sq mm and reristance to spread of flame of Class A category with property of being termite / borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge. (MS hold fast/lugs/SS dash fasteners shall be paid for separately.
S&F for aluminium powder coated (of required colour) three track sliding windows frame top & sides of size 92 x 31.75 x 1.50mm (section No 20831) bottom of size 92 x 31.72 x 1.50mm (section No 20832) and shutter top and bottom of size 40 x 18 x 1.55mm (section No 20736) and lock side shutter frame of size 40 x 15 x 1.45mm (section No 20737) with rubber gasket, beading and locking arrangement including making good to disturbed portion complete including stainless steel wiremesh 0.36mm nominal dia with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 5mm thick glass with necessary rubber beading gasket etc complete all as specified and as directed.
S&F steel ventilators fixed type complete with glazing bars dovtailed or welded,etc complete all as specified and as directed.
S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares nexc 0.5 sq. m in each pane complete all as specified and as directed.
S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed
S&F 150 mm size, aluminium anodised , barrel tower bolts of extruded section and fixed complete all as specified and as directed.
S&F 100mm butt hinges, stainless steel body, mild steel hinge pin, anodised & fixed to PVC door complete all as specified & as directed.
S&F 150mm size aluminium handles, cast type, anodized and fixed complete all as specified and as directed.
S&F 250mm length of bolt, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples,complete all as specified and as directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work & precast concrete articles complete all as specified and directed.
M&L Brick work with sub class old size 'B' bricks, straight or curved on plan to any radius, built in CM (1:4) as in half brick thick walls complete as specified and directed.
M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directd.
M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
All as per Item No.32 above, but 6 to 8mm dia but in stirrups complete all as specified and as directed.
S & F Framed work such as grills, gratings, etc with ends of bars shouldered and / or riveted, or forged into spikes, frames guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work con-forming to Fe-290 Gde-E165 complete all as specified and as directed.
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete (Fe-410-W(Gde-E-250) quality- B complete all as specified and as directed.
S&F 1 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.
S&F 150 mm Cast iron or malleable cast iron handles, cast type, stove enamelled black complete all as specified and as directed..
S&F Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St.-240 complete all as specified and directed.
S&F for Rolled mild steel Plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, with out any attachment conforming to Fe:410-W(Gde-E-250) quality-A complete all as specified and directed.
M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, longbut length of bolt exc 5cm but n exc 10cm long complete all as specified and as directed.
M&L for Pre-paintd hot dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50 mm thick of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor completed all as specified and as directed.
M&L for Pre-paintd hot dip aluminium-zinc alloy metallic coated plain steel sheet, any pattern corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50 mm thick of an approved colour and having yield strength of 550 MPa as in eaves roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor completed all as specified and as directed.
M&L Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. Brushing neat cement slurry with 3.0kg of cement per sq. Metre complete all as specified and as directed.
M&L Glazed coloured ceramic tiles in vertical surface 300x450x6 to 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles laid over and including 15 mm thick rendering as in backing wall plaster in CM (1:4) complete all as specified and directed.
M&L Coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes complete all as specified and directed.
M & L for Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite finish polishing complete over 20mm thick cement screed bed in CM (1:4) complete all as specified and as directed.
All as per item 46 above but in riser of steps, skirting dado etc incl 15 to 18 mm thick cement screed bed in CM (1:4) complete all as specified and as directed.
M&L Marble work 15 to 17mm thick (table rubbed and polished) in steps, floors, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade Makrana white complete all as specified and as directed.
M&L 75 mm thick, PCC ( 1:3:6) type C-1, (using 20 mm graded stone aggregate) as in plinth protection/pavings/shafts laying in 1:20 slope including making joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot brown bitumen 85/25 and two parts heated sand (by volume), surface finished even and smooth without using extra cement, complete all as specified and directed.
Taking down cement or cement lime plaster, terazzo dado, skirting etc any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water & removal of debris off the premises etc. complete all as specified and directed.
M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.
M&L Rendering 15.mm thick plaster in CM (1:6) on fair faces of brick work or concrete surfaces including finishing top even and smooth without using extra cement complete all as specified and directed.
M&L Rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces and finished fair and even all as specified and directed.
Supply only integral water proofing compound of approval brand complete all as specified and directed.
M&L Preparation of newly plastered surfaces on walls and applying three coats of white wash complete all as specified and as directed.
M&L Preparation of old plastered surfaces of ceiling and applying two coat of white wash complete all as specified and directed.
M&L Preparation of old plastered surfaces of walls and applying two coats of white wash complete all as specified and directed.
M&L Prepration of newly plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
M & L Preparation of new steel and iron surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.
S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.
S&F PVC (SWR) bends 110mm dia any radius with oval access all as specified and directed.
S&F PVC (SWR) bends 75mm dia any radius all as specified and directed.
Taking up or down steel water tubing and connections, including cleaning for refixing or removal from site, for bore of pipes 15mm dia complete all as specified and directed.
S&F GI pipes 15mm dia bore of pipes, medium grade, galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
Taking up or down steel water tubing and connections, including cleaning for re-fixing or removal from site, for bore of pipes 20 mm dia complete all as specified and directed.
S&F GI pipes 20mm dia bore of pipes, medium grade, galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
S&F in repair vitreous china wash down water closet, "Orissa pattern, size, 580x440mm white, with integral foot rest (excluding flushing cistern and flush pipe) but including provision of cement concrete bedding complete all as specified and directed.
S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including Urinal spreader of PTMT of suitable colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) with PVC waste pipe 40mm bore complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; , flush pipe, grating and Union for discharge pipe,etc complete all as specified and directed.
S&F in repairs PVC High/Low level flushing cistern 10 litres capacity including all fittings i.e float valve, syphon, flush pipe, brackets all as specified and directed.
S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified & directed.
S&F 40 mm Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqm as in waste water pipes complete fixed in repairs complete all as specified and directed.
S&F in repairs 15mm bore dia stop valves / angle valves/ concealed valve , cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
Dismantling water tanks exc 500 Ltrs but not exceeding 1000 Ltrs capacity complete all as specified and as directed.
S&F Rotational moulded polyethylene water storage tanks of 1000 Ltrs capacity,(cylindrical vertical with closed top) double layered,hoisted and fixed in position all as specified in SSR part-I and as directed.
S&F in repair 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe & fixed (Minimum weight 210 gms) complete all as specified and as directed.
S&F Soap dish of stainless steel fixed to wall with chromium plated brass screws fixed in repair complete all as specified and as directed.
S&F Stainless steel tubular towel rail 600mm long with brackets 20mm dia fixed to wall with chromium plated brass screws fixed in repair complete all as specified and as directed .
M&L 75mm dia PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F in repairs, Fancy type long body 15mm dia Bib taps cast copper alloy, chromium plated screwed down to iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repairs Brass chromium plated shower rose 125mm size Chromium plated with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.
S&F Wash basins, vitreous china, white flat back of size 550 x 440 mm including brackets and cutting for and pinning in ends of brackets or erecting stand 32 mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32mm dia flexible waste pipe and 15 mm bore piller cock and including brackets complete all as specified and directed.
Demolition of RCC (washing trough) wash hand basin, incl cutting reinforcement from the wall cleaning the surface for receiving top layer complete all as directed by Eng-in-charge.
Taking down carefully copper/ aluminium point wiring (light, fan, call bell, socket or power) complete, including fittings and fixtures such as switches, ceiling rose, pendants, holders, regulators, sockets, light fitting etc. & removing from site and making good the disturbed surfaces of wall, ceiling etc. complete all as specified and directed
M&L for concealed point wiring with 1.5 sqmm, FRLSH PVC insulated, unsheathed, multistranded single core copper conductor cable with ISI marked for working voltage 1100 volt grade, drawn in and including PVC conduit size not less than 20 mm dia ISI marked incl cutting chases in wall and making good complete and with necessary fixing acessories for fixing inside wall and on roof surface etc. including 1.5 sqmm, FRLSH PVC insulated multistranded copper conductor of ISI standard as earth continuity conductor and connecting to earth dolly and to be terminated in metal switch box for one light/fan point controlled by one switch complete all as specified and directed.
All as per Item No.86 above but one 3 pin socket outlet 5 amp independent board complete all as specified and directed.
All as per item No 86 above, but one 15 Amps socket outlet but using copper conductor of size 2.5 sq mm, PVC insulated single core cable 2.5 sqmm for earth continuity conductor complete all as specified and directed.
S&F Modular switch one way 6 Amps 1 module including Modular PVC cover plate with frame and metal flush box of suitable size all as specified and directed.
S&F Modular switch one way 16 Amps 1 module including Modular PVC cover plate with frame and metal flush box of suitable size all as specified and directed.
S&F Modular socket outlet, 5 pin 6 Amps flush type 2 module including Modular PVC cover plate with frame and metal flush box of suitable size all as specified and directed.
S&F Modular socket outlet,5 pin 6/16 Amps flush type 2 module including Modular PVC cover plate with frame and metal flush box of suitable size all as specified and directed.
S&F Ceiling rose surface type bakelite 65x50mm three terminal complete all as specified and directed.
S&F LED tube light fitting 4 ft. 1 x 18 watt with 230 volts, with bipin holder connector block, LED retrofit tube rod etc complete with all accessories internally pre-wired and fixed to walls/ceiling with screw on round PVC blocks including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.
S&F LED bldg security light fitting 48W watt with 230 Volts with IP 66. High Impact resistance complete with all mounting bracket and accessories internally pre-wired and fixed to walls complete all as specified and directed.
S&F Exhaust fan made of Metal body 300mm sweep complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding and making hole on wall of appropriate size for fixing complete all as specified and directed.
M & L Concealed sub main wiring complete with 2 runs of 4 sq mm,single core, PVC insulated,unsheathed cable,1100 volts grade,multi standard with copper conductor drawn through and including PVC conduit pipe and accessories on surface wall/floors/concealed etc. with one run of PVC insulated 4 sq mm copper conductor for earth continuity conductor including taking down old US wiring all as specified and directed. Note :- Three rand one run of copper wire shall be measured as one unit length.
S&F Sheet metal enclosure single pole and neutral enclosure with a two pin and earth plug and socket complete with one SP MCB 20 amps 240 volts complete all as specified and directed.
S & F MCB SP 6 to 32 Amps 240 volts all as specified and directed.
S & F MCB SPN 6 Amps to 40 Amps 240 volts all as specified and directed.
S&F Single pole and neutral DB wall mounting type,240 Volts, 8 Way with 200 Amps rated bus bar,double door suitable for fixing MCB's including connecting etc and taking down U/S DB ,main switch complete all as specified and directed.
S&F Electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc all as specified and directed.
Dismantling and Taking down un serviceable CFL 600x600 mm square light fittings from existing 14 feet high including fittings and fixtures from Tech bldg and making good the disturbed surfaces complete all as specified and directed by Eng-in-charge.
S&F 36 Watt LED fitting back lit panel having white polycarbonate body & aluminium plate heat sink, high quality PMMA and HPF driver suitable for armstrong/grid ceiling,fixture size 595x595 mm,powder coated aluminium extruded housing including LED driver and lamp and fixing in recess ceiling with suitable size of aluminium strip as required for fixing of LED fitting with all accessories prewired and connecting up with 3 core twisted flexible copper conductor cable of size 23/0.0076 including taking down old unserviceable fitting complete all as specified and directed.
M&L for making scaffolding mesh upto a staging height of 10 feet inside the tech bldg with required Nos of bamboo/wooden material as required to replace the CFL light fitting with new LED light fitting at an height of 14 feet and dismantling the scaffolding material from the work site all as directed by Engineer-in-Charge.
M/S JUBARAJ GOGOI
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .