ADDN/ALTN TO BALCONIES OF SC/JC STUDENT ACCN AND PROVN OF GUARD ROOM FOR (01 PLUS 03) NIGHT PICKETS WITH ATTACHED BATHROOM APPROX (41 SQM) IN ASC 105 (OTM ACCN) OF STATIC WKSP EME AT AWC UNDER GE (AWC) MHOW.

Amount

Surface excavation in soft soil n exc 30 cm deep and avg 15 cm deep and getting out complete.

Excavating in trenchs n exc, 1.5 m wide and n exc 1.5m in depth for foundation etc or for shafts wells cesspits, manholes pier holes, laying of cables, , pipe etc n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and as directed.

Excavation over areas in any type of soil nexc 1.5m deep and getting out complete all as specified and as directed.

Description same as per Item No 03.00 but exc 1.5 m but nexc 3.0 m depth complete all as specified and as directed.

Returnning filling in including spreading leveling watering and well ramming in layers not exc 25cm any types of soil complete all as specified and as directed.

Removing of excavated material exc 250 m not exceeding 500m and depositing where directed at a level and not exceeding 1.50m above the staring point complete all as specified and directed.

Material and labour for PCC 1:4:8, type D-2 , 40mm graded crushed stone aggregate) as in sub floor, Sub base etc complete all as specified and directed.

Material and labour for PCC 1:2:4, type B-1, 20mm graded crushed stone aggregate) as in surface channel etc complete all as specified and directed.

Material and labour for PCC 1:2:4, type B-1 , 20mm graded crushed stone aggregate) as in lintels up to 1.5 m clear span, bands, benching and hold fasts etc complete all as specified and directed.

Material and labour RCC M-25 design mix in foundation footing, plinth beam, bases for column and pedestal using 20mm graded curshed aggregate complete all as specified and directed.

Material and labour RCC M-25 design mix in column, pillars, piers, post etc using 20mm graded curshed aggregate complete all as specified and directed.

Material and labour RCC M-25 design mix in lintel beam,roof beam etc using 20mm graded curshed aggregate complete all as specified and directed.

Material and labour RCC M-25 design mix in roof slab etc using 20mm graded curshed aggregate complete all as specified and directed.

Material and labour RCC M-25 design mix in Chajjas etc using 20mm graded curshed aggregate complete all as specified and directed.

Formwork to sides of concrete foundations footings bases of columns raft and raft beams sides and sofits (if any) of foundation and plinth beams, and similar work vertical or to batter fair finished sufraces of concrete complete all as specified and as directed.

Formwork to sides of pillars posts, struts, piers, columns and stanchions fair finished surfaces of concrete Square rectangular or polygonal complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchibngs, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams etc fair finished surfaces of concrete complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work including attached pillasters, buttresses etc vertical or to batter complete all as specified and directed.

Formwork to Chajjas, troughs and similar items including edges complete all as specified and as directed.

M&L Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and bindingwith and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and as directed.

Description same as per Item No 20.00 but 6 mm to 8 mm dia complete all as specified and as directed.

Description same as per Item No 20.00 but 6mm to 8mm dia and over upto and including 10mm dia in stirrups spacers amd binders quality confirming to TMT bar complete all as specified and as directed.

M&L for brick work with FLY ash Bricks modular size straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with FLY ash Bricks modular size straight or curved on plan to any radiusin half brick thick wall built in cement mortar 1:4 complete all as specified and as directed.

M&L for brick work with FLY ash Bricks modular size straight or curved on plan n exc 6m mean radius built in cement mortar 1:6 complete all as specified.

M&L for honey comb brick work with FLY ash Bricks modular size straight or curved on plan n exc 6m mean radius built in cement mortar 1:6 complete all as specified.

M&L broken bricks Loosing filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and directed

M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:6, in one layer with water proofing compound, surface finished even and fair witout using extra cement. Note- WPC shall be measured and paid separately.

M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, in one layer with water proofing compound, surface finished even and fair witout using extra cement. Note- WPC shall be measured and paid separately.

Supply only integral water proofing compound complete.

M & L 12 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and smooth without using extra cement complete.

M & L for 5 mm thick rendering on concrete surface in cement mortar 1:3, on ceiling , below chajja and shelves, complete all as specified.

M & L for applying two coat of cement base paint over a coat of primer coat of white cement primer including preparation of newely plastered surfaces including external wall putty complete all as specified and as directed.

M & L applying two coat of oil bound distemper over a coat of primer including wall putty preparation of newely plastered surfaces complete as in wall surface complete all as specified and as directed.

M & L applying three coat of white wash including preparation of surfaces complete on ceiling under shelves and chajja complete all as specified and as directed.

Material and labour for moorum filling in floors of paving laid in layers not exceeding 15cm thick including spreading leveling watering and consolidation complete all as specified and directed.

Material and labour hard core of broken stone or boulders of guage n. exc 63mm deposited spread and levelled in layers n. exc 15cm thick water and rammed to a true surface complete all as specified and as directed.

M & L 25 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in base of flooring, laid over PCC sub base, surface finished even and fair without using extra cement complete all as specified and as directed.

M&L for colour non skid ceramic tiles of size 300 x 300 x7 to 8mm including 15mm th screed bed in cement mortar 1:6 jointed in neat cement slurry including pointing in coloured cement/colour cement to match complete all as specified and as directed.

M&L coloured glazed ceramic tiles of size 300 mm x 450 mm x 8 mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white cement with pigment to match including 10 mm thick rendering in CM 1:4 ll as specified & directed by Engineer-in-Charge.

M&L for colour non skid mat finish 8 to 10 mm thick ceramic tiles exc 0.18 but nexc .38sqm, including 15mm th screed bed in cement mortar 1:6 jointed in neat cement slurry including pointing in coloured cement/colour cement to match complete all as specified and as directed.

Description same as per Item No. 41.00 but in skirting over 10mm thick rendering in CM 1:4 complete all as specified and as directed.

M & L 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection,Path, laid in alternate ways, surface finished even and fair without using extra cement complete all as specified and as directed.

S & F framed work as in doors or gates and angle joist, channel, angle or other sections with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors to be prepare for hanging or sliding with and including either and hinges or steel hanging door fittings including steel sheet for door covering, hanging door fittings and hanging also fastening and fixing incl hold fast of Fe-290(Gde E-165) complete complete all as specified and as directed.

S&F steel window with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars/guard bars dovetailed or welded complete all as specified and as directed.

Description same as per Item No. 45.00 but without glazing bars complete all as specified and as directed.

S&F steel ventiletor with top hung shutters including hinges,steel peg, peg stay complete with glazing bars complete all as specified and as directed.

S&F framed work such as grills gratings etc and similar works conforming to Fe 410-0 complete all as spd and directed

S & F 3 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and as directed.

Description same as per Item No. 49.00 but plain glass complete all as specified and as directed.

Supply and fixing stainless steel wire cloth 0.56mm nominal dia of wire and avg width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Supplying and fixing 35mm thick Glazed and skeleton shutter IInd class hardwood, open rebated and prepared to receive glass, gauge etc ( without sash bars ) edges of framing plain chamfered or rounded into chamfered fitted with cut and mitred beads for securing glass etc size of mambers of shuttters as specified

Supply and fixing 35mm thick IInd class hard wood plain framed panelled shutter ( any Nos of panels ) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density wood particle board with commercial face veneers and fitted to chowkhat complete all as specified and directed

M&L applying two coats of synthetic enamel paint over a coat of primer on steel surfaces exc 10cm width or girth incl prep of surface complete all as specified and directed.

M&L 10mm thick plaster in one layer in CM (1:4) over concrete roof padding/wall surface, cement mortar mixed with and including WPC as per manufacturers instruction. Note- WPC Shall be measured and paid separately

M & L water proofing treatment on roof surface in following steps through manufacturer / authorised applicator of the manufacturer instructions complete :- (i) wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction parapets, etc, and surface painting, with a layer of blown bitumen of any preparation applied hot @ 1.7 kg per sqm, blinded with grit or pea size gravel @ 0.006 cum per sqm and lightly tampered (area of flashing etc shall be added to the roof area) (ii) Laying APP based polymeric membrane minium weighing 3 kg/sqm and minium 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. (iii) Applying a coat of bituminius aluminium paint @200 gm /sqm (minimum ) in two coat .

Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and as directed.

S&F tublar towel rail 600 mm PTMT fixed with and incl chromium plated brass screws complete all as specified and as directed.

S&F Dafry rod 20mm dia as in certain rod including bracket complete all as specified and as directed.

M&L for providing pre cast cement concret complete all as specified and as directed.e 1:2:4 type B1 as in manholes covers and set in CM 1:6 complete all as specified and as directed.

M&L for concrete bed to drain pipe 110mm bore incl packing under and haunching against the side of pipe after they are laid and tested in cement concrete 1:4:8 type D2 complete all as specified and as directed.

S&F butt hinges medium weight cold rolled mild steel and fixed size of hinges in 100mm complete all as specified and directed.

S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S & F 150 mm long Aluminium handles, cast type, anodised complete all as specified and as directed.

Supply and fixing 300mm ordinary rat tail pattern spring incl roller plate complete all as specified and directed.

Supply only 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.

S&F vitreous China Orrissa pan with integral foot rest size 580xmmx440mm white with ‘P’ or ‘S’ trap front or back inlet and foot rests any pattern fixed in repair all as spfd including concrete bedding complete all as spfd and direrected.

S & F Vitreous China Wash hand basin white, flat back, size 550 x 400 mm excluding taps but including brackets and waste fitting and pipe complete all as specified.

M & L for PVC (SWR) Multi Floor trap of 75 mm outlet with grating including jointing with solvent cement complete all as specified and as directed.

S & F 75 mm bore PVC (SWR) pipes single socketed in any length laid in trenches or floors complete all as specified and as directed.

Description same as per Item No. 70.00 but fixed on wall complete all as specified and as directed.

S&F PVC SWR vent cowl 75mm dia bore complete all as specified and as directed.

S&F 150x150mm salt glazed stone ware gully graps square or round mouthed type P all as specified.

S&F 110mm bore PVC (SWR) pipes single socketed in any lenth with rubber ring joints,laid in trenches or in floor, complete all as spfd and direrected.

S&F PVC (SWR) bends of radius 110mm dia complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with asses door complete all as specified and as directed.

S & F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including bracket with 32 mm dia PVC pipe 600 mm long complete.

S&F 15 mm bore steel water tubing med gde galvanised fixed to wall roof floors ceiling etc incl all fittings and fixtures complete all as specified and directed.

Description same as per item no. 79 but 20 mm bore complete all as specified and directed.

S&F 20mm stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union all as specified.

S&F 15mm angle stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle fancy type chromium plated screwed ends for iron pipe or for union all as specified.

S&F 15mm stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle fancy type chromium plated with long sank and cup (concealed type) screwed both ends for iron pipe or for union all as specified.

S&F bib tap 15mm cast copper alloy bright clutch or butterfly handlw fancy type chromium plated screwed down for iron pipes all as specified and directed.

S&F pvc connection 15mm size pipe 450mm long with PTMT nuts complete all as spefied and directed.

Supply only15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated fancy type screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

S&F swivel shower of PTMT any colour for fixing to steel pipe of 15mm bore all as spfd and directed Make: Symet(minimum weight 40gms) complete all as specified and directed.

S & F 500 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

Solid PVC Door framed of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per speceification & drawings complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tube for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap inserted for top raik & bottom rail. Panelling of plain coloujr PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, all as per specified and directed by Engineer-in -Charge

Demolition of reinforced cement concrete of any descrption and any position as in roofs, floors,beams, landings, chajjas, balconies, cover slabs and similar suspended work complete all as directed.

S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates and similar work including necessary scaffolding for work at any height upto 4 storey bldgs, complete all as specified and directed.

S & F pre-painted galvalume aluminium zinc coating GI based corrugated/plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in sun shade, roof covering/ cladding to wall, and similar work fixed with self tapping screws including necessary scaffolding for work at any height upto 4 storey bldgs, complete all as specified and directed.

Cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required all as specified and directed complete.

S & F Mild steel screw bolts (machine made) 11 to 15 mm dia of neck with hexagonal or square heads at one end and screwed the other, or screwed end to be fitted with washers and one hexagonal or square nut, exc. 10 cm and n. exc 15 cm long all as specified and directed.

S & F mild steel rag or lewis bolts,12 mm dia of neck screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, n. exc 15cm long all as specified and directed.

M & L Dubbing out average 15 mm thick on irregular/ demolished surface of walls, concrete surface like cantiliver beam , chajjas, lintles, balconies etc in Cement plaster 1: 4 complete all as specified and directed.

M&L fly ash brick work with modular brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including demolition of brick work built in cement mortar complete all as specified and directed.

M & L 15 mm thick rendering in cement mortar 1:4 mixed with water proofing compound as per manufacturer instruction on brick work or concrete surfaces, surface finished even and smooth without using extra cement including taking down of cement plaster any description on brick or stone wall complete and also including necessary scaffolding for work at any height upto 4 storey bldgs, complete all as specified and directed. Note :- WPC shall be measured and paid separately as supply only.

M & L 10 mm thick rendering in cement mortar 1:3 on concrete surfaces as in ceiling surface finish even and smooth without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound as specified.

M & L for preparation of newly plaster surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

M & L preparing old decorated plaster or un-plastered surfaces of ceiling and applying one coat of white wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete complete all as specified and as directed.

M&L preparing of old plastered or unplastered surfaces of walls, cornices etc and applying one coat of cement base paint complete all as specified.

M & L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar places, surface finished even and fair without using extra cement complete all as specified and directed.

M & L machine pressed precast concrete 60 mm thick glossy interlocking paver block M-35 Grade to IS 15658-2006, with grey cement and no pigment laid over dry sand cushioning, filling of joints with sand including demolition of stone slabs and tiles of any description or thickness etc. colour and shape approved by GE,complete all as specified and directed. Note:- Sand cushioning shall be measured and paid separately.

M & L sand filling under floors or interlocking tile or in foundation including watering and consolidation complete all as specified and directed

M & L PCC 1:4:8 type D-2 using 40 mm graded aggregate as in mass concrete, foundation and any other location etc. and including demolition of PCC, complete all as specified and directed.

M & L precast cement concrete curved stone with solid blocks, exc. 10 cm in width type B1 1:2:4 (20 mm graded aggregate) as in coping of poles including necessary use of formwork, set in cement mortar 1:6 etc. , complete all as specified and directed.

Roughning of surfaces of old concrete surface by picking,sweeping clean and washing down with water to remove dust etc.complete all as specified and directed.

M&L brushing neat cement slurry with 3.0kg of cement per sqm complete all as specified and directed.

M&L Granite 20 mm thick(of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plateforms and like including pointing in white cement(1:2) using marble dust with admixture of pigment to match with shade of granite over & incl 15mm thick screed bed built in CM 1:4 all as specified

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations for bullnosing / moulding to exposed edges( any type) and polishing to match the adjoining surfaces complete all as specified.

Dismanling floor,hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L vitrified ceramic tiles light shade 09 to 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm screed bed in cement mortar 1:4 complete all as specified and directed

S & F 75 mm dia bore PVC (SWR) bends with access door any radius with solvent cement joints, complete all as specified and directed.

S & F 75 mm dia bore PVC (SWR) junction single, single (T) with access door equal or unequal, joints with solvent cement,complete all as specified and directed.

M&L for chipping of spalled and loose concrete and cleaning rust from re-inforcement by sand blasting, scrubbing down conrete sufrace with wire brushes cleaning with water allowed to dry and applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited all as specified and applying two layers of guniting over steel welded mesh 2mm dia of wire and aperture 75mm,total thickness of gunite n.exc 25mm thick (average thickness) in cement mortar 1: 2 using OPC 53 grade cement mixed with polycrete admixture @ 2% by weight of cement or as per manufacturers instructions and finally applying cement plaster over gunited surface of required thickness to give even, uniform and smooth finish conforming to proper gerometrics in cement mortar ( 1 : 3) to match with the existing surface as in sides and soffits etc of slabs, chajjas, fins, facias, parapets , columns and beams etc complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height upto 4 storey bldgs all as specified. (Note : Steel welded mesh is to be tightend / welded with the existing re-inforcement. The cost of welded mesh is deemed to be included in the unit rate quoted by the contractor).

M&L point wiring with 1.5 sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel modular terminal boxes any size/module, conceiled on walls and fixed by neans of brass screws incl modular cover plates and cover frme any size/module, for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for One light / fan / bell controlled by one, one wayswitch 5/6 Amp complete all as specified and directed.

Description same as per Item No. 119.00 but for One 3 pin, 5/6 amps socket outlet point on independent board controlled by one, one way 5/6 amps switch complete all as specified and directed.

Description same as per Item No. 119.00 but for One 3 pin, 5/6 amps socket outlet point on same board controlled by one, one way 5/6 amps switch complete all as specified and directed.

M&L point wiring with 2.5 sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 2.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel modular terminal boxes any size/module, conceiled on walls and fixed by neans of brass screws incl modular cover plates and cover frme any size/module, for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for one 15A socket point independent complete all as specified and directed.

S&F Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V complete all as specified and directed.

S&F modular switch 1 way 6 A , 1 module complete all as specified and directed.

S/F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed.

S/F switch modular type 16 A, 1 module complete all as specified and directed.

S/F socket modular type multipurposes 6/16 A, 2 module complete all as specified and directed.

S&F surface /wall mounted LED batten poly carbonate housing for retrofit LED tube T-8 type upto 1x20 watt, 4 feet long pre wired incl integrated electronic driver complete with all connected accessories all as specified and directed.

Supply and fixing retrofit LED tube T-8 type 1x20 watt, 5700 to 6500 K and THD less than 15% , polycarbonate body ,glass tube 4 feet long complete with 02 years warrenty all as specified and directed.

M&L for LED Bulk head fitings 6.5 watts designed for modern homes available with premium quality diffuser for glarefree light and easy to install snapfit installer complete including taking down of old CFL/bulb bulk head fitting, making good of surfaces all as specified and directed.

S & F LED bldg security light fitting 30 watt made up of pressure die cast aluminium housing with highly efficient LEDs as lighting source with acylic cover as diffuser with IP-66 and IK-07 protection THD < 10% lumen output >=110 lumen per watts complete incl GI pipe 40 mm size 1 meter bend into size for fixing of security light with suitable bracket complete all as specified and directed.

S&F MCB DB SPN 12 way double door with 200 Amps rated bus bar ,230 volts, 50 Hz complete all as specifed and directed.

Supply & Fix MCB SPN 32 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed.

Supply & Fix MCB SP 6 to 32 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed.

Supply and fixing TV socket outlet complete all as specified and as directed.

Supply and fixing Telephone jacket complete all as specified and as directed.

M & L sub main wiring with 2 runs of 4 sqmm main wire along with 1 run of 4 sqmm earth wire (green in colour) single core FRLSH PVC nsulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed / surface conduit (medium grade) wherever necessary with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good disturbed surfaces complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.

S&F Exhaust fan , steel body AC single phase 230 volt of size 300 mm mm sweep complete with blade, frame and louvers all as specified and directed incl making of hole in brick work wherever necessary making good disturbed surface, painting to match with existing surfaces.

S&F Single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB SP 20 Amps conceiled in wall, making good disturbed surface with cementing and distumbering all as specified and directed.

Supply , fixing rigid non metallic PVC conduit fixed conceiled/on wall wherever necessary with all connected accessories 20 mm dia for cable TV connections complete all as specified and as directed.

M&L for Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 ( 9.0 metres long) complete inluding excavation, errection, PCC , coping of pole as per direction complete all as specfied and directed. Note: Excavation and earth work incl PCC shall be measured and paid seperately.

M&L for cement concrete in foundation of poles of grade C2 1:3: 6 ( 40 mm graded aggregate) complete all as specified and directed.

M&L for FRP junction box three terminal and neutral with one MCB SP 20 A for control of security light fixed on pole incl connection of XLPE cable with glands incl provision of 1.5 sqmm multistranded copper PVC flexible wire (02 run) from Junction box to Security lights complete all as specified and directed.

Supply , installation, Testing and commissioning of LED security light fitting with a nominal system 7200 lumen output, minimum system efficiency of 115 lm/W and total power consumption not exceding 60 watts (including driver). The luminare shall have a rated system lifetime of 50000 burning hours at L70B50 . The luminare should have a color temaprature of 5700-6500K and CRI>80. The luminare shall meet IP66/IK07 or IK08 rating with THD<10% and PF>0.95. The luminare housing should made of pressure die cast aluminium and the integrated luminare optics shall have a high efficient diffuser with more than 85% transmittance. The fiitings should have an internal SPD of miimum 4KV. The driver should have a phase to phase protection for 08 hours..The luminare shoul have a NABL approved L M 79report , LM 80 report from LED manufacturer is must along with photo biological report. . Luminare and the driver shall be BIS certified seperately and shall posess seperate 'R' numbers. Fittings should be include ,nut bolt and SS scerews for suitably fixing on steel tubular pole complete with GI tubing 40 mm dia bend into size 1.2 Mtr lrngth with mounting clamps, nut bolt and washers , GI pipe 15 mm size light grade from FRP looping box to security light fixed with suitable MS clamps all as specifed and directed.

Supply and fixing water heater storage type of 5 Star rating, capacity 25 liters with glass coated heating element to protect the heating element from oxidation and carbonization including PTMT connections 15 mm size with nuts and length of 450 mm with all fixing arrangements such as anchor fastner,bolts and nuts of suitable size as directed at site . The geyser should be tough enough to withstand pressure upto 8 bars. The inner tank should have a minimum 7 years warranty submitted by the tenderer from manufacturer complete all as specified and directed.

Supply and fix in replacement of ceiling fan 1200 mm sweep , BLDC fan,BEE rated 5 star ceiling fan or above with 350 RPM or above with power factor of >/=.0.90 for air delivery of 220 M/Cum minimum service value of 8 with electronic modular type fan regulator 1 modular, complete all as specifeid and as directed.

Supplying, laying, fixing, jointing and testing LT under ground XLPE insulated, galvanised steel strip or wire armoured heavy duty electric cable with aluminium conductor , multi stranded 1100 volts grade, cross-sectional area 16 sq. mm 2 core, ISI-7098 marked, with electric connection lugs, laid in trenches/under floor under PCC/interlocking tiles incl making good of surface with PCC/ cementing or fixed naked with walls/on poles/in ducts/in GI pipes etc and including taking down complete trenches / all as as directed at site. Note: Excavation, earth work, sand cushioning, protection tiles/brick/block shall be measured and paid seperately.

Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified and directed.

M&L for River sand filling in trenches below and above/ arround UG cable for cable protection, in duct under& abovethe cables incl punning arround cable complete all as specified and directed.

Tubes, 'light grade,galvanised, with all fitting of size 40 mm ;laid in trenches for cable protection all as specified and directed.

Replacement of Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised earth lead wire of 4.0 sqmm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc complete all as shown in electrical plate No 5, connected to earthing test point complete including testing on completion all as specified.

SUNRISE ENTERPRISES