Renovation and upgradation of 14 nos E type quarters at Vijnanpura IISc

Amount

Dismantling of existing structures like culverts, bridges and retaining walls and other structures compraising of masonry, cement concrete, wood work, steel work including T & P and scaffolding wherever necessary, sorting the dismantled materials, disposal of unserviceable materials, stacking the serviceable materials with all lifts and lead of 1000 metres complete as per specifications i) Lime/cement concrete. i. By manual means : a. Lime concrete/cement concrete grade M10 and below rcc/Pre strussed Cement concrete grade M20 & above with all lead, lifts, Loading and unloading and other including charges etc complete as per direction. Breaking R.C.C kitchen platform and shelver.

Dismantling burnt brick masonry in clay mortar/lime mortar/cement mortar and stacking the bricks within a radius of 50 m and removing the debris to a distance upto 200m . with all lead, lifts, Loading and unloading and other including charges etc complete as per direction.

Dismantling the tile work in floor and roof laid in cement or surki mortar including stacking the materials with in 50 m lead of tiles thickness 10 mm to 25 mm.including all lead, lifts, Loading and unloading and other including charges etc complete as per direction.

Dismantling cement concrete flooring or plain cement concrete work including removing and conveying the debris to distance upto 200m (within average thickness of 15 cms).including all lead, lifts, Loading and unloading and other including charges etc complete as per direction.

Dismantling plastering work including removing and conveying the debris to distance upto 200m including all lead, lifts, Loading and unloading and other including charges etc complete as per direction.

Removing cuddapah slab flooring and stacking the material with a lead of 50 meters.including all lead, lifts, Loading and unloading and other including charges etc complete as per direction.

Wall bores in brick masonry upto 45 cm thick and Refinish with CC 1:4 as per directions including all lead, lifts, Loading and unloading and other including charges etc complete as per direction.

Removing of existing old or broken wash basin / urinals and disposing it with all cost and conveyance labour for all items of work, HOM of equipment with all lead ,lift, loading and unloading, transportation charges and all other incidental charges etc., complete as per specification. (Disposal of Debris away from the IISc Campus)

Removing of existing old or broken water closet Indian / European and disposing it with all cost and conveyance labour for all items of work, HOM of equipment with all lead , lift, loading and unloading, transportation charges and all other incidental charges etc., complete as per specification. (Disposal of Debris away from the IISc Campus)

Provision for removing of Existing steel window shutters including spot removing with welding machine,men and material, trimming,Grinding,Sections as per direction with all lead, lift loading and unloading transportation charges and other incidential charges servicable materials tobe handover to the central stores as per direction of of Engineer Incharge.(Payment made by Voucher +CP)

Providing ,supplying and fixing white vitreous china clay, water closet European type ( wall mounted ) with inter grated M S frame,bend & flushing options with solid plastic seat fixed suitably (all are approved make) with fittings and clamps,overflow arrangements with special and 25 mm mosquito proof coupling of approved design etc complete as directed by Engineer in charge

Providing and fixing white vitreous china clay, flat back wash basin size 550x400mm with pedstal a single 15mm C.P brass pillar tap with C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour ,all lead,lifts, Loading and unloading and other including charges etc complete as per direction.

Providing ,supplying and Fixing of stainless steel sink mat finish 24"x18" with proper support fixed suitably with fittings (all are approved make) etc with all lead,lifts, Loading and unloading and other including charges etc complete as directed by Engineer in charge.(payment made by voucher+cp)

Providing and fixing C.P. brass towel rail 600 mm length, 20mm dia with C.P brackets, fixed to wooden cleats with C.P. brass screws including cost of materials, all lead,lifts, Loading and unloading and other including charges, labour etc complete as per specifications.

Providing and fixing 600x450mm bevelLead edge mirror of superior glass with 6mm hard board backing and fixed to wooden cleats with C.P screws, washers, all lead,lifts, Loading and unloading and other including charges, including cost of materials, labour complete as per specifications

Providing and fixing CI Nahani trap of approved make conforming to ISI specifications and construction of Cistern n CC 1:2:4 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot) 10 cms x 7.5 cms including all lead,lifts, Loading and unloading and other including charges etc complete as per direction.

Providing and fixing 7.5 cms to 15.00 cms dia NP grating 100 mm dia. including all lead, lifts, Loading and unloading and other including charges etc complete as per direction.

Providing and fixing unplasticised PVC connection pipe with brass union 15mm nominal bore 450mm length of PVC connection including cost of all materials, all lead,lifts, Loading and unloading and other including charges etc complete as per direction. labour and HOM of equipments with all leads complete as per specifications

Providing and fixing in position chromium plated brass shower rose with 15 or 20mm inlet 150mm dia including cost of all materials, labour and HOM of equipments with all leads complete as per specifications.

Providing and fixing Chorinated polyvinyl cloride ( CPVC) Pipes conforming to IS 15778 having thermal stebilty for hot & cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00m spacing this includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chasis and making good the same including testing of joints complete ( Concealed work including cutting chasis and good the walls etc))20mm dia pipe including all lead, lifts, Loading and unloading and other including charges etc complete as per direction.

Providing and fixing Chorinated polyvinyl cloride ( CPVC) Pipes conforming to IS 15778 having thermal stebilty for hot & cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00m spacing this includes jointing of pipes and fittings with one step CPVC solvent cement trenching refilling and testing of joints complete ( external works)40mm dia including all lead, lifts, Loading and unloading and other including charges etc complete as per direction.

Providing and fixing to wall, ceiling and floor, low density polyethylene pipes 6.00 kgf/sq.cm working pressure 110mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor including all lead, lifts, Loading and unloading and other including charges etc complete as per direction. cost of all materials, labour charges, HOM of equipments and testing complete as per specifications.

Providing and fixing to wall, ceiling and floor, medium density PVC pipes 6.00 kgf/sq.cm working pressure 75 mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all lead,lift loading ,unloading and other incidential charges, materials, labour charges, HOM of equipments and testing complete as per specifications.

Providing , supplying and fixing of wall mixture (approved make like hindware/jaquar or any other equivalent make approved by project engineer), including cost of materials, all lead,lifts, Loading and unloading and other incidental charges, labour etc complete as per specifications and dirrections .

Providing , supplying and fixing of Health flow set (approved make like hindware/jaquar or any other equivalent make approved by project engineer), including cost of materials, all lead,lifts, Loading and unloading and other incidental charges, labour etc complete as per specifications and dirrections .

Providing , supplying and angle cock (approved make like hindware/jaquar or any other equivalent make approved by project engineer), including cost of materials, all lead,lifts, Loading and unloading and other incidental charges, labour etc complete as per specifications and dirrections .

Providing , supplying and 2 way bib cock (approved make like hindware/jaquar or any other equivalent make approved by project engineer), including cost of materials, all lead,lifts, Loading and unloading and other incidental charges, labour etc complete as per specifications and dirrections .

Providing , supplying and bib cock (approved make like hindware/jaquar or any other equivalent make approved by project engineer), including cost of materials, all lead,lifts, Loading and unloading and other incidental charges, labour etc complete as per specifications and dirrections .

Providing , supplying and kitchen cock swan type (approved make like hindware/jaquar or any other equivalent make approved by project engineer), including cost of materials, all lead,lifts, Loading and unloading and other incidental charges, labour etc complete as per specifications and dirrections .

Providing TMT steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, including all lead,lifts, Loading and unloading and other including charges etc complete as per direction. labour, HOM of machinery complete as per specifications. TMT Bars Fe 500

Providing and removing centering, shuttering, strutting, propping etc.,and removal of form work for flat surface such as suspended floors, roofs, landings, balconies and likes, thickness above 200 mm including all lead,lifts, Loading and unloading and other including charges etc complete as per direction. cost of all materials, labour complete as per specificaiton.

Providing and laying in position Reinforced cement concrete of design mix M25 with opc cement @340kgs with 20mm and down size graded granite metal coarse aggregates @0.70 cum and fine aggegates @ 0.47 cum with super plastisiser @3lts confirming to IS 9103-1999 reaffirmed -2008, machine mixed, concrete laid in layers not exceeding 15 cms. thick,vibrated for R C C.beams ,coloums of all sizes in foundation plinth and super structurew ground floor level for roof slabs ,stair case,lintles, columns including cost of all lead,lift loading ,unloading and other incidential charges,materials, labour, HOM of machinery, curing complete as per specifications. as per direction

Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including all lifts, lead, Loading and unloading and other including charges etc complete as per direction. cost of materials, labour, curing complete as per specifications.

Providing and laying in position plain cement concrete of mix 1:3:6 withopc cement @220kgs with 20mm and down size graded granite metal coarse aggregates @0.84 cum and fine aggegates @ 0.56cum , machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation and plinth, including cost of all lead, lifts, Loading and unloading and other including charges etc complete as per direction. materials, labour, HOM of machinery, curing complete as per specifications. as per direction

Providing and constructing burnt brick masonry with approved quality of non-modular bricks of standard size of class designation 50 (table moulded) with cement mortar 1:6 for basement and superstructure including all lead,lifts, Loading and unloading and other including charges etc complete as per direction. cost of materials, labour charges, scaffolding, curing complete as per specifications. as per direction

Construction of partition wall 10 cms thick with ground moulded modular burnt bricks of class designation 35 with cement mortar 1:4 including all lead, lifts, Loading and unloading and other including charges etc complete as per direction. cost of materials, labour charges, scaffolding, curing complete as per specifications.

Providing 15mm thick cement plaster in single coat with cement mortar 1:6 to brick masonry including lime rendering for plastering to wall and ceiling and rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including all lead,lifts, Loading and unloading and other including charges etc complete as per direction. cost of materials, labour, curing complete as per specifications.

Providing rough cement plastering 15mm thick in single coat with cement mortar 1:4 to brick masonry for base of dadooing works with sand of approved quality, providing and removing scaffolding, including all lead, lifts, Loading and unloading and other including charges etc complete as per direction. cost of materials, labour, curing complete as per specifications

Providing and laying plat form using prepolished,watercut/gang saw 40mm thick telephonic black granite.laid on exisdting vertical supports and fixing in Cm1:3 proportion.including cutting to required shape pattern with paper joints,including full rounding for nosing,finished with cemrnt mortor,pointed with pigments to match the colour of slab making through jointing with sealent,making holes 25mmx12mm grooves in joints including curing, all lead,lifts, Loading and unloading and other including charges etc complete as per direction.

Providing half nosing for 40mm thick granite slab using required machinery including cost and conveyance of all materials, all lead, lifts, Loading and unloading and other including charges etc complete as per direction. labour for all items of work,HOM of equipments etc complete asper specification as per direction.

Providing and laying flooring for corridors/lobbies using combination of pre polished 19 mm thick water cut/gang saw Grey Granite, Black Granite, and strips of 50mm wide pre flamed grey granite using pre polished grey granite 19mm thick 76%, Pre polished black granite 19mm thick @ 2% and preflamed 19mm thick grey granite @22% over existing cement concrete bed in CM 1:4 average 20mm thick pointed with white cement/colour pigment etc including all lead,lifts, Loading and unloading and other including charges etc complete as per direction.

Providing half nosing for20mm thick granite slab using required machinery including cost and conveyance of all materials, all lead, lifts, Loading and unloading and other including charges etc complete as per direction. labour for all items of work,HOM of equipments etc complete asper specification

Constructing brick masonry inspection chamber 450x300mm, and 450mm depth, ( clear inside dimension ) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, C.I cover with frame (light duty) 450x300mm including all lead,lifts, Loading and unloading and other including charges etc complete as per direction.

Constructing brick masonry inspection chamber 450x300mm, and 450mm depth, ( clear inside dimension ) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, C.I cover with frame (light duty) 450x300mm

Providing Ceramic tiles of approved make,shade and size with johnson / Kajaria /somany or other equivalent brand approved by the PE Cum EO for flooring, treads of steps and landings laid on a bed of 12mm thick, cement mortar 1:3 mix, flush pointing with white cement using colour pigment , including all lead, lifts, Loading and unloading and other including charges etc complete as per direction. cost of materials, labour, curing, complete as per specifications. - for Ceramic Tiles of size 30x30cms 6mm thick.

Providing and laying colour glazes tiles size300mmx450mm for walls with the border of size 300mmx100mm with johnson / Kajaria /somany or other equivalent brand approved by the PE Cum EO.set in cement mortar1;3and pointed with white cement mixed with the matching colour pigments,with necessary curing cleaning including providing and removing scaffolding whatever necessary etc, complete .the work including all lead, lifts, Loading and unloading and other including charges etc complete as per direction.cost of materials,labour charges for all items of work hire charges for equipment, etc, complete asper specification

Providing and fixing Special make glazed Vitrified tiles (Granomite finish) of approved make, quality and colour of size 600x600x10mm thick with johnson / Kajaria /somany or other equivalent brand approved by the PE Cum EO.fixed on existing flooring with a special roffe adhesive for flooring and skirting etc., complete including all lead,lifts, Loading and unloading and other including charges etc complete as per direction.providing spears at required interval and removing stains etc., complete

Providing and fixing 65mmx90mm GRP Doorframe fabricated using E-Glass Chopped Strand Mat (CSM). U.V-stabilized Isopthalic Gelcoat and Isopthalic resin. The thickness of the GRP skin shall not be less than 2.0 mm. The doorframe consists of four segmens, which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screws. The GRP frame shall be provided with wooden reinforcement of 6 locations fro high screw holding capacity for fixing metallic hold fast and shall be consolidated by filling with medium density foam/Plaster with fibre reinforcement. Six Numbers of 260mmx25mmx5mm size 'S' shaped M.S. flat hold fast shall be provided with the frame. including all lead,lifts, Loading and unloading and other including charges etc complete as per direction.

Providing and fixing factory made single leaft rigid GRP Sandwich composite door shutter of 32mm thick, laminated with two GRP skins with wood grain finish, fabricated using U.V-stabilized Isopthalic Gelcoat and on layer of 450 gsm E-Glass Chopped strand Mat (CSM), impregnated with orthopthalic polyster resin. The thickness of the skins shall not be less than 1.5mm. Expanded Polystyrene (EPS) structural foam panel of 29mm thickness and a density of 20 Kg/m3 shall be used as core material. Wooden reinforcements made of Seasoned Salwood block of cross section not less than 28mmx32mm and also necessary salwood reinforcements for fixing the metal fittings such as tower bolts, aldrops, handles, etc, shall be provided. A structural adhesive compatible with EPS foam shall be used for bonding the core material, the Salwood reinforcement and the skins. The material and process for manufacturing the door shutters shall confirm to RV/TIFAC Composites Design centre Standards and specifications and the door shutters tested in confiramation to IS 4020-1994. The finish of shutter will be plain colour White/Ivory/Beige/Light Grey or any other colour using high quality pigments. Exclusing cost of fixtures and inclusive of supply of shutters to respective work spot including all lead,lifts, Loading and unloading and other including charges etc complete as per direction.

Providing and fixing flush door shutter made out of solid core black board type, well seasoned chemically treated hard wood battens and internal frame with minimum 45 mm wide wooden frame all-round door shutters covered with cross bonded sheets (core veneer) hot pressed and fastened on both sides of the door using liquid phenol formaldehyde resin as per IS specification 2202 (Part-1) 1991. From manufacturer (Factory) complete as per specificaiton.30 mm thick including all lead,lifts, Loading and unloading and other including charges etc complete as per direction.

Manufacturing ,supplying and Fixing wooden ward robe of 0.60m deep using 19mm thick vinyl bonded waterproof block board, shutters alround wardrobe,lockable drawers with sliding channels, cuboard drapery hangers, curtain rods with end brackets, openable shutters with 19mm X 6mm thick plain teak wood beading,lipping 1.5mm thick commercial ply vertical supported finished in 1mm lamination sheet with 2 coats of white synthetic enamel paint ove 2 coats of patti including brass fitting, parlimentary hinges, magnetic catches,approved brand lock, adhesives, synthetic resins,nails, screws etc including all lead,lifts, Loading and unloading and other including charges etc complete as per direction.

Providing, supplying, making and fixing of wooden shelves and loft.using 19mm thick plywood boards for External & Internal Frame works,alround with necessary shutterincluding all lead,lifts, Loading and unloading and other including charges etc complete as per direction.labour charges,Farmico sheet,Handle,T Bolt etc complete.as per direction of Engineer-in-charge.

Providing & Fixing of 3 track x 2- panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2 (Titanium Dioxide) at 6 PHR with TPV (Thermo Plastic Vulcanized) and lead free , gaskets- grey colour having isolated drainage and reinforced with Galvanized Iron profile through - out the window frame. The outer frame having a overall size of 108 mm width x 45 mm height with reinforcement of 1 mm thickness and Sash with overall size of 39 mm x 75 mm with GI reinforcement of 2 mm and mesh sash of size of 30mm x 48.5 mm. Glazing bead for fixing of glass shall be of size 20 mm x 24 mm. Windoe=ws shall be provided with 5 mm plain float glass, standard hardware & single point locking system with touch lock. Wall thickness of frame & sash shall be of 2 mm - 2.5 mm. Maximum possible size- 2419 mm x 2119 mm. including all lead,lifts, Loading and unloading and other including charges etc complete as per direction.

Providing & Fixing of 2 track x 2- panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2 (Titanium Dioxide) at 6 PHR with TPV (Thermo Plastic Vulcanized) and lead free , gaskets- grey colour having isolated drainage and reinforced with Galvanized Iron profile through - out the window frame. The outer frame having a overall size of 60 mm width x 45 mm height with reinforcement of 1 mm thickness and Sash with overall size of 39 mm x 58 mm with GI reinforcement of 1 mm and mesh sash of size of 39mm x 58 mm. Glazing bead for fixing of glass shall be of size 20 mm x 24 mm. Windows shall be provided with 5 mm plain float glass, standard hardware & single point locking system with touch lock. Wall thickness of frame & sash shall be of 2 mm - 2.5 mm. Maximum possible size- 1819mm x 1819 mm including all lead, lifts, Loading and unloading and other including charges etc complete as per direction.

Providing & Fixing openable windows made out of multi chambered UPVC(matching to RAL -9016) sections and with minimum Tio2(Titanium Dioxide) at 6 PHR with TPV (Thermo Plastic Vulcanized) and lead free,gaskets-grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the openable frame.The Frame having a overall size of 60mmx55mm with GI reinforcement of 1mm thickness and openable sash with overall size of 60mmx75mm and GI reinforcement of 1.5mm thickness.Glazing bead for Fixing of glass shall be of size 20mmx34mm.windows shall be provided with 5mm plain float glass,standard hardware with friction hing & multi point locking system with handle.wall thickness of frame & sash shall be of 2mm-2.5mm.Maximum possible size -900mmx1819mm including all lead, lifts, Loading and unloading and other including charges etc complete as per direction.

Providing & fixing of louvered ventilator made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2 (Titanium Dioxide) at 6PHR with TPV (Thermo Plastic Vulcanized) and lead free with gaskets- grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1 mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4mm pin head glass. Wall thickness of frame shall be 2mm. Maximum possible size- 1000mm x 1000mm including all lead, lifts,Loading and unloading and other including charges etc complete as per direction.

Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including all lead,lifts, Loading and unloading and other including charges etc complete as per direction. repairs to scraches, cost of labour, complete as per specifications.

Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including all lead,lifts, Loading and unloading and other including charges etc complete as per direction. repairs to scraches, cost of labour, complete as per specifications.

Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by suing different grade sand papers, including all lead,lifts, Loading and unloading and other including charges etc complete as per direction.cost of all materials, cost of labour and scaffolding etc., comp;ete sas per the specification.

Providing and applying painting in two coats with plastic emulsion paint of approved brand on ceiling Roofing/Sloping surface to give an even approved shade after throughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, all lead,lifts, Loading and unloading and other including charges etc complete as per direction.cost of materials, labour, complete as per specifications

Providing and applying painting in two coats with plastic emulsion paint of approved brand on wall surface to give an even approved shade after throughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, all lead,lifts, Loading and unloading and other including charges etc complete as per direction.cost of materials, labour, complete as per specifications.as per direction

Providing and applying painting two coats (including priming coat) on new wood surface and / or wood based surface with enamel paint to give an even shade, cleaning the surface of all dirt, dust and foreign matter, sand papering including all lead, lifts, Loading and unloading and other including charges etc complete as per direction. cost of materials, labour, complete as per specifications.as per direction

Providing and applying polishing with french polish over previously polished wood or wood based surface to give an even surface after cleaning the surface of all dirt, dust and foreign matter, sand papered smooth, including all lead,lifts, Loading and unloading and other including charges etc complete as per direction. cost of wood filler and materials, labour, complete as per specifications

Providing & finishing external walls in two coats over one coat of 100% acrylic silicon glazed primer with antifungal paint for top coat of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered materials, free from mortar drops and other foreign matter cost of materials, labour complete and including all lead,lifts, Loading and unloading and other including charges etc complete as per direction. as per specifications.

Miscellaneous and unforseen items comes during execusion of works including carpentary fixtures like hinges, Tbolts, aldrops, etc.,

Supplying of ......feet - PVC Batten with integrated LED tube....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V @ 50/60Hz & Power factor >0.9 along withInput: 220-240V @ 50/60Hz & Power factor >0.9 along withCE approved. 2 years Warranty against any manufacturingdefect working under standard electrical condition.LED light fighting 1 x 2' - 9/10w

Supplying of ......feet - PVC Batten with integrated LED tube....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V @ 50/60Hz & Power factor >0.9 along withInput: 220-240V @ 50/60Hz & Power factor >0.9 along withCE approved. 2 years Warranty against any manufacturingdefect working under standard electrical condition.LED light fighting 1 x4'- 20/22 w

Supplying and fixing of LED Retrofit type LED lamp 9/10 watts

Supply of recess mounted rolling type LED square or round Down light 12 watts with 4/6W GU 10 LED Lamp Rib Fabricated from Die cast aluminum with white powder coated prewired to mains connector with suitable driver & having swiveling unit of aluminum die cast eye ball & LED Lamp position retained by circular wire spring. 5 years Warranty against any manufacturing defect working under standard electrical condition. P-65,i-12.5LED square or round down light

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 Amps SP

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 608985-32 Amps DP

Supplying heavy gauge PVC conduit pipe …….dia .......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws 25mm dia 2mm thick

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system." 48 Sweep (1200mm) Pg-46,i-7.3.1Regular model

Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired.

Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply.12'' Sweep (300mm)

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps. ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire.

Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps.On wall / ceiling / Rafter / Girders .

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-3Way

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4-5Way

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8Way

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 3 Module.1 1 to 3 Module

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.1 to 3 Module 4 Module

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 3 Module 8 Module

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 GROUP A 6Amps SP Switch

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 GROUP A6Amps 3 way 5 pin Socket

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 GROUP A16Amps Flush type SP switch

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 GROUP A16 Amps 3 way 5 pin socket

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 PGROUP AElectronic stepped regulator.

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 PGROUP A6Amps Bell push

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 GROUP ATV/Telephone socket

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 GROUP ARJ45/ I.O.outlet Cat-6

Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board.GROUP A 6Amps SP Switch

Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board.GROUP A6Amps 3 way 5 pin Socket

Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board.GROUP A6Amps Bakelite ceiling rose

Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board.GROUP A6 Amps lamp holder

Erection charges for fixing a …liters capacity wall mounting electric geysers using bolts, flat at one end nut and washers at the other end for through bolts and nuts and washers with 150x450x600mm back plate and wiring complete with 15A 3 pin top Up to 30 Litres

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP of GROUP -A. 1.5 sqmm 1X1.5 sqmm=20.502X2.5 sqmm=64 Total Rs.84.50

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP of GROUP -A. 4 sqmm .42X4 sqmm=2X45 =90

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. upto 50mm conduit in brick wall

Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws Ding Dong Bell

Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board GROUP A 6Amps Bakelite ceiling rose

Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board GROUP A 6 Amps lamp holder

Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws.

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.1.5 sqmm

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.2.5 sqmm

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.4 sqmm

Supplying and fixing PVC/metal conduit Deep junction box 25mm deep junction box

Connecting Pipes for Geyser

Supplying and fixing/replacement of heating element for Geyser/Boiler.2KW Capacity

Supplying and drawing UTP-CAT 6E LAN cable.

Miscellaneous Removing Existing Conduit, switch plates, Fan etc

VIVIDH CREATIONS

T M RAGHU