REPAIR TO SUNKEN FLOORS, FLOORING, PLASTERING WALL SEEPAGE, PLUMBING AND SANITARY FITTINGS IN NO 1 AREA AT AFS PATHANKOT

Amount

Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in cm 1:6 including demolition of existing brick work complete all as specified and directed by Engineer-in-Charge

All as above item No 01 above, but except bricks complete all as specified and directed by Engineer-in-Charge

Reinforced cement concrete (Nominal mix) 1:2:4 , type B-0 (using 12.50mm graded crushed stone aggregates) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like including form work and demolition the existing complete all as specified and directed by Engineer-in-Charge

Form work to soffits of beam and shelves and like flat rough finished complete all as specified and directed by Engineer-in-Charge.

Form work to edges of concrete flat rough finished thickness and not wxc 20 cm thick complete all as specified and directed by Engineer-in-Charge

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to Fe-310-O or Fe-410-O complete all as specified and directed by Engineer-in-Charge.

Rendering 15mm thick cement plaster in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement, with two coats of exterior emulsion paint on new surface complete all as specified and directed by Engineer-in-Charge Note : Rate for form work if requd to be included in the rate quoted by the contractor

Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, including taking down existing plaster with two coats of OBD of any tint over a white wash complete all as specified and directed by Engineer-in-Charge

Applying 3mm thick wall care putty on wall surfacescomplete all as specified and directed by Engineer-in-Charge

Rendering 15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement including two coats of exterior emulsion paint on new surface , incl taking down existing plaster complete all as specified and directed by Engineer-in-Charge. Note :Rate for form work if reqd to be incl in the rate quoted by the contractor.

Rendering dubbing coat over damaged irregular surface of chajjas roof projections ceiling facia etc average 15mm thick in cm 1:4 over cement slurry coat thick @ 3 Kg/sqm making the surface even followed by 5mm thick rendering in CM 1:3 furnished even& smooth including applying two coats of weather proof emulsion paint incl making of drip course as reqd complete incl roughening surface of old concrete by picking sweeping clean and washing with water complete all as specified and directed by Engineer-in-Charge. Note :Rate for form work if reqd to be incl in the rate quoted by the contractor.

Rendering or plastering work 10mm thick in CM 1:3 in fascia or edging of Chajjas, ceiling and roof projections etc, including taking out pealed off plaster / concrete and making the line in true shape and finishing the surface without using extra cement including applying two coats of weather proof emulsion paint for facia, chajja, and roof projection etc complete all as specified and directed by Engineer-in-Charge

Providing Cement concrete in roof kerbs or mud stops, rounded or chamfered on edges ,1:2:4 type B-0 (using 12.5 mm graded agg) complete all as specified and directed by Engineer-in-Charge

Cement concrete 1:3:6 type C-2 (using 40mm graded agg) as in plinth, 75mm thick and finished even and smooth without using extra cement, including demolition of existing cement concrete complete all as specified and directed by Engineer-in-Charge

Cement concrete 1:2:4, 40mm thick type B-1 (using 20mm graded agg) as in Floor, finished even and smooth without using extra cement, including demolition of existing cement concrete complete all as specified and directed by Engineer-in-Charge

Demolition of plain cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge

Supply only glass dividing strip 3mm thick, 38mm wide and inserted in position to conform to design complete all as specified and directed by Engineer-in-Charge

Non-skid coloured ceramic tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 and dismantling/demolition on existing surface complete all as specified.and directed by Engineer-in-Charge

Vitrified tiles light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 and dismantling/ demolition on existing surface complete all as specified and directed by Engineer-in-Charge

Machine cut kota stone slab 18-20 mm thick as in flooring, over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15 mm thick cement screed bed in cement mortar 1:4 and dismantling existing floor complete, all as specified.and directed by Engineer-in-Charge

Glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 and dismantling existing floor tiling complete, all as specified.and directed by Engineer-in-Charge

Granite (of any type), 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including making full curving the edges and dismantling existing floor complete, all as specified.and directed by Engineer-in-Charge

Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetjylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete including dismantling existing water tank all as specified and directed by Engineer-in-Charge

Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetjylene material which is duly stablized with anti-oxidentPlastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete including dismantling existing water tank all as specified and directed by Engineer-in-Charge

Supply and fixing in repair 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all incl taking down existing G I tubing as specified and directed by Engineer-in-Charge

All as per Srl item No 25 above, but fixing only

Supply and fixing in repair 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all incl taking down existing G I tubing as specified and directed by Engineer-in-Charge

All as per Srl item No 27 above, but fixing only

Cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair Vetreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest (excluding flushing cistern and flush pipe), including long arm P-trap (CI) 100 mm dia of length up to 700 mm or as per site requirement , complete incl making good to floor all as specified and directed by Engineer-in-Charge

Supply and fix in repair Vitreous China wash down water closet pan (pedestel pattern) white,including trap connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC jet for Pedestal pattern pan including 450/600mm long PVC connection and plastic water closet seat of white in colour,back closed pattern with flat bottom,and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair Vitreous china wash hand basin white of bowl size 550 x 440mm including waste coupling and PVC waste pipe, 32mm dia, 15 mm dia bore pipe pillar tap cast copper alloy with capstan heads chromium plated fancy to be fixed in M S brackets complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle incl brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair PVC connection 15mm bore size with two nuts and washers of length 450mm all as specified and directed by Engineer-in-Charge

Supply and fix in repair Cabinet mirror plastic body for toilet of size 350x450mm with 4mm thick looking mirror complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm all as specified and directed by Engineer-in-Charge

Supply and fix in replacement Stainless steel plate rack of size 900mm X 900mm X 250 mm complete all as specified and directed by Engineer-in-Charge

Supply and fix sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including 32 mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or demolition of existing cemented/ marble kitchen sink and making good with providing Marble strip overall size of sink 610 x 460mm and bowl size 550x400mm complete all as specified and directed by Engineer-in-Charge. Note : Marble will be measured and paid separately.

Supply and fix in repair bib taps cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down screwed for iron pipe of 15 mm bore complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair bib taps suitable for 15 mm bore pipe long body fancy type brass CP with, capstan head screwed down screwed for iron pipe or brass ferrule complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair cast copper alloy chromium plated fancy type central hole basin mixer with capstan head for high pressure suitable for 15 mm bore pipe complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair wall mixture brass chromium plated suitable for fixing witj GI pipes 15 mm dia complete all as specified and directed by Engineer-in-Charge

Supply and fix in replacement 15 mm dia stop valve/angle valve chromium plated with long shank concealed type cast copper alloy ISI marked with crutch or butter fly handle high pressure screwed down complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair 15mm stop valve cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-Charge

PCC 1:4:8, type D-2, (using 40mm graded crushed stone aggregate) in foundation filling and mass concrete, (as in sunken floor) with spout pipe 50 mm dia up to 600 mm long or as per site requirement including demolition of existing surface complete all as specified and directed by Engineer-in-Charge

Doctor fixit Pidifin 2k high performance 2 component flexible Acrylic polymer modify cement base water proofing coating in two coat 1mm thick dry film mixed in ratio 2:1 by weight or 1.5:1 by volume complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair 100mm/75mm bore cast iron floor trap with CP grating including jointing to waste pipe fixed in cement concrete type B-1, 1:2:4, complete all as specified and directed by Engineer-in-Charge

Supply and fix of Grating round 100mm/75 mm size of CP complete all as specified and directed by Engineer-in-Charge

Supply and fix of 100mm bore sand cast iron soil waste and vent pipe ISI marked in any length with or without ears with lead joints laid in floor/walls all as specified and directed by Engineer-in-Charge

All as above item No 50 above, before but 75mm bore.

Supply and fix of 100mm dia cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engineer-in-Charge

Supply and fix of 75mm dia cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed by Engineer-in-Charge

Supply and fix of 100mm dia, branch pieces, single (equal or unequal) ordinery or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engineer-in-Charge

Supply and fix of 75mm dia, branch pieces, single (equal or unequal) ordinery or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair 100mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair 100mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair 100mm bore PVC (SWR) bends copmplete all as specified and directed by Engineer-in-Charge

Supply and fix in repair 100mm bore PVC (SWR) single T complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair 75mm dia PVC (SWR) floor tap , plain with grating including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge

Removing of vegetation / plantation on the wall/ roof/ any position of up to double storey building including necessary scaffolding upto 6 m height and roots superfacial area n.exc 2 sqm each and making good of surface by applying chemical treatment with GLYPHOSATE 41% including removing /refixing of CI/GI pipe lines complete all as specified and directed by Engineer-in-Charge. Note : Brick work, plaster and CI/GI pipe lines shall be measured and paid separately.

Supply and fix in repair GI spout pipe medium weight 50mm bore dia of length 450mm set in PCC 1:4:8 porous concrete and make the external portion with CM 1:3 with and including water proofing @ 200 ML per bag complete all as specified and directed by Engineer-in-Charge.

Supply and fixing of 40 mm dia circular stainless steel pipe to act as support for up and down. The pipe shall be fixed using stainless steel screws which are fixed on stainless steel plates complete all as specified and directed by Engineer-in-Charge

Taking down shutters of any description of size exc 1 sqm and not exc 2 sqm and easing, adjusting,refixing builder hardware as required including renewal of unserviceable screw, etc,. and refixing in same opening as required at site complete all as specified and directed by Engineer-in-Charge

Factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour sheet reinforcement with MS square tube all as specified, in built fixed to wall with CSK screw 100 mm long, screw holding strength of PVC frame Shall be 200 Kgf ,fixing shall be done with anchor screw ( 150 mm x 8mm) with PVC Nylone SLEEVE fixed with screw including taking down with existing one complete all as specified and directed by Engineer-in-Charge. NOTE:- During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster ,similar wall tile,floor tile etc and as per site requirement.

Factory made PVC Flush door of 33 to 35 mm thick overall thickness comprising of 19 SWG MS tube of size 19 x 19 mm (19 gauge) covered with 7 mm Thick Prelame any design ( As approved) Coloured Sheet on Both Side. Core shall be filled with 19 mm to 20 mm thick PVC solide Board, including taking down with existing one complete all as specified and directed by Engineer-in-Charge. NOTE :- All screws shall be self tapping chrome plated

Supply and fix in stainless steel butt hinges medium weight 100mm all as specified and directed by Engineer-in-Charge. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm

Supply and fixing Factory made Steel Ventilator 1.25mm thick box type(primer coated)ERW hollow P section of size 60mmx25mm including grill using 10 sqmm bar double rebated both gauge and glass shutter comprised gauged glazed Skelton shutter ERW sec 50mmx20mm and 1mm thick with two openable leaf consisting two Nos sash bar of T Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T Section of size 60mmx25mm and 1.25mm thick refer TD Drawing No CEAF/AR-480/2015 Sheet No 2(A)/4 dated 30.12.2015 including cutting holes and good dismantled portion in PCC(1:2:4) type B1 and match the disturbed portion with existing surface four Nos for each window including following fitting welded to frame shutter : (a) Hold fast,150mm long of 12mmx3mm made to shape O4 Nos per window (b) handle of Z Sec20mmx25mm, 100mm long-per No leaf (c) MS Tower bolt 150mm long-02No per leaf . (d) Z section 20mmx25mm, 100mm long stopper 1 No per leaf. (e) cleat 55mm long of hollow square 15mmx20mmx63mm welded to hinge. 1 No per leaf (f) MS Pintal hinges of size 75mmx12mm. 2 Nos per leaf, (g) Stainless steel wire cloth, 0.25 mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm & fixed with alluminium wire staples (h) Glass pane 3mm thick fixed with MS pin and oil putty (j) Including two coats of synthetic enamel paint complete. NOTE: During Fixing of window, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

M/S SOHAL CONSTRUCTION CO

M/S HEAVEN BUILDERS AND ENGINEERS

INDERJIT SINGH

Vijay Kumar Contractor and Engineers

M/S G P MARWAHA

dadwal engineers

M/S NAYYAR CONSTRUCTION COMPANY