Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.6 LAccepted-AOC 1 6 620 CHAITANYAPURI INDRA NAGAR DILSUKHNAGAR HYDERABAD TELANGANA 500060 UDYAM TS 09 0007870 37AAEPO0535A1Z8 B 36AAEPO0535A1ZA R MSME STATUS AS VERIFIED | RANGA REDDY | TELANGANA | 500060 | L1 | Accepted-AOC L1 | |
| 2 | L2₹31.0 L+₹4.0 L (14.7%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹36.2 L+₹9.1 L (33.6%)Rejected-AOC | L3 | Rejected-AOC L3 |
| Sl No | Description | Qty | Unit | OM SAI POWER SYSTEMS L3 | Srinivash Engineers L2 | DPS sales and services india L1 |
|---|---|---|---|---|---|---|
| 1.00NOTES :- 1. Contractor need to purchase minimum 50% of all items mentioned in this CA within 20 days of getting sample approval and kept in custody so that no delay in work due to non-availability of materials will be faced. Contractor should ensure during the cause of work that he has minimum 25% of materials with him till the completion of item/date. 2. Contractor should buy the exact items which are given with catalogue reference. Other makes will be approved only by submitting non availability Certificate Company. Contractor need to remove all the dismantled items without delay. 3. Rate quoted for demolition/dismantling /taking down is inclusive of removing the same from site and dumping at given locations anywhere inside station. 4. Contractor will make his own arrangement to store his items. 5. Some places in this contract where the vehicle will not reach the spot directly, the material will be moved manually in these places. The rate quoted will be considered all inclusive on this account. 6. All trade skilled labour required in this contract shall be present daily in working hours, irrespective of complaints received. 7. Complaint for a similar items may be in scattered / different area, quoted rate will be considered all inclusive on this account. | ||||||
| 1.01 | M&L for servicing of DG set of capacity 15 KVA to 75 KVA installed at AFS Begumpet by carrying out the following maintenance including testing on completion for satisfactory performance at connected load complete all as specified and as directed :-
(a) Drain out of diesel from tank and storing in cleaned containers, cleaning the tank thoroughly by removing sediments settled at the bottom and refilling the drained out diesel duly filtered.
(b) Drain out engine oil from the sump, cleaning the sump thoroughly and refilling the sump with new engine oil upto required level | 13 | Job | 7,500 ₹97,500 | 1,500 ₹19,500 | 1,100 ₹14,300 Lowest |
| 1.02(c) Replacing suitable fuel filter stainer, fuel pipe, fuel filters, engine oil filter, air cleaner element and oil seal assembly complete. (Note: Material will be measured and paid seperately as 'Supply only') (d) Check coolant level & top up the same if required (Note: Coolant will be measured and paid separately as 'Supply Only') (e) Check and top up the electrolyte/distilled water in starting batteries to maintain the required specific gravity. Cleaning of battery terminals & applying petroleum jelly to battery poles & brass connectors. (f) Checking and general adjustments of FIP, fuel injectors, governer, turbo charger etc for proper functioning of DG Set. (g) Replacing suitable size of 'V' belts, hoses and clamps of air cleaner. (Note: Material will be measured and paid seperately as 'Supply only') (h) Tightening all the fasteners of complete DG set to the required torque and cleaning the complete DG Set with suitable cleaning agent. | ||||||
| 2.00 | All as per item No. 1 here-in-before but for above 75 KVA and upto 160 KVA DG Set Make -greaves/ Kirloskar all as specified and as directed. | 7 | Job | 10,000 ₹70,000 | 4,000 ₹28,000 | 1,300 ₹9,100 Lowest |
| 3.00Supply only the following items suitable for DG set of capacity upto 75 KVA capacity, Make: Kirloskar :- | ||||||
| 3.01 | (a) Fuel filters set (primary and micro filter) | 16 | Each | 1,150 ₹18,400 | 450 ₹7,200 | 300 ₹4,800 Lowest |
| 3.02 | (b) Fuel pipes set (Fuel pump to filter and filter to feed pump) | 12 | Each | 950 ₹11,400 | 450 ₹5,400 | 250 ₹3,000 Lowest |
| 3.03 | (c) Lub. oil filter | 15 | Each | 950 ₹14,250 | 450 ₹6,750 Lowest | 500 ₹7,500 |
| 3.04 | (d) Air cleaner element | 12 | Each | 2,150 ₹25,800 | 1,700 ₹20,400 | 1,000 ₹12,000 Lowest |
| 3.05 | (e) V- Belts | 8 | Each | 650 ₹5,200 | 300 ₹2,400 | 250 ₹2,000 Lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
16 Aug 2025, 6:00 pmClosed
GE (AF) Hakimpet
Secunderabad
REPAIR, RENEWALS AND MAINT TO STREET LIGHTS, SOLAR SECURITY LIGHTS AND SOLAR HEATERS AND DG SETS AND AMF PANELS AT BEGUMPET AND CAW UNDER GE (AF) HAKIMPET
2025_MES_721485_1
8814/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Begumpet and CAW
As per NIT
9 documents required · 9 mandatory
₹500
GE (AF) Hakimpet
₹90,000
Yes
14 Oct 2025
19 Jul 2025
18 Aug 2025
19 Jul 2025
16 Aug 2025
2 Aug 2025
Amount
NOTES :- 1. Contractor need to purchase minimum 50% of all items mentioned in this CA within 20 days of getting sample approval and kept in custody so that no delay in work due to non-availability of materials will be faced. Contractor should ensure during the cause of work that he has minimum 25% of materials with him till the completion of item/date. 2. Contractor should buy the exact items which are given with catalogue reference. Other makes will be approved only by submitting non availability Certificate Company. Contractor need to remove all the dismantled items without delay. 3. Rate quoted for demolition/dismantling /taking down is inclusive of removing the same from site and dumping at given locations anywhere inside station. 4. Contractor will make his own arrangement to store his items. 5. Some places in this contract where the vehicle will not reach the spot directly, the material will be moved manually in these places. The rate quoted will be considered all inclusive on this account. 6. All trade skilled labour required in this contract shall be present daily in working hours, irrespective of complaints received. 7. Complaint for a similar items may be in scattered / different area, quoted rate will be considered all inclusive on this account.
M&L for servicing of DG set of capacity 15 KVA to 75 KVA installed at AFS Begumpet by carrying out the following maintenance including testing on completion for satisfactory performance at connected load complete all as specified and as directed :- (a) Drain out of diesel from tank and storing in cleaned containers, cleaning the tank thoroughly by removing sediments settled at the bottom and refilling the drained out diesel duly filtered. (b) Drain out engine oil from the sump, cleaning the sump thoroughly and refilling the sump with new engine oil upto required level
(c) Replacing suitable fuel filter stainer, fuel pipe, fuel filters, engine oil filter, air cleaner element and oil seal assembly complete. (Note: Material will be measured and paid seperately as 'Supply only') (d) Check coolant level & top up the same if required (Note: Coolant will be measured and paid separately as 'Supply Only') (e) Check and top up the electrolyte/distilled water in starting batteries to maintain the required specific gravity. Cleaning of battery terminals & applying petroleum jelly to battery poles & brass connectors. (f) Checking and general adjustments of FIP, fuel injectors, governer, turbo charger etc for proper functioning of DG Set. (g) Replacing suitable size of 'V' belts, hoses and clamps of air cleaner. (Note: Material will be measured and paid seperately as 'Supply only') (h) Tightening all the fasteners of complete DG set to the required torque and cleaning the complete DG Set with suitable cleaning agent.
All as per item No. 1 here-in-before but for above 75 KVA and upto 160 KVA DG Set Make -greaves/ Kirloskar all as specified and as directed.
Supply only the following items suitable for DG set of capacity upto 75 KVA capacity, Make: Kirloskar :-
(a) Fuel filters set (primary and micro filter)
(b) Fuel pipes set (Fuel pump to filter and filter to feed pump)
(c) Lub. oil filter
(d) Air cleaner element
(e) V- Belts
(f) Oil seal housing
Supply only the following items suitable for DG set of capacity above 75 KVA and upto 160KVA, capacity Make: Kirloskar :-
(a) Fuel filters set (primary and micro filter)
(b) Fuel pipes set (Fuel pumpt to filter and filter to feed pump)
(c) Lub. oil filter
(d) Air cleaner element
(e) V- Belts
(f) Oil seal housing
Supply only of coolant suitable for DG sets complete all as specified and as directed. Make: K-oil / Cummins Castrol /Servo.
Supply only of engine oil of suitable grade for various DG Sets as per manufacturer's recommendation complete all as specified and as directed. Make: K-oil or Cummins.
Descalling of radiator assembly by removing from engine, transporting to the workshop and removing the sediments, scales and rust etc. by submerging in acid for atleast 08 hrs, cleaning with suitable brush, high pressure water washing and air cleaning, arresting the leakages by gas welding / soldering with suitable material, re-assembling the same with new gaskets and transporting to the site, fixing to the engine with new hoses, clips etc complete all as specified and directed by Engineer-in-Charge for DG Set of capacity upto 75 KVA installed at AFS Begumpet complete all as specified and as directed.
All as per item No. 7 here-in-before but for DG Set above 75 KVA to 160 KVA complete all as specified and as directed.
Dismantling the defective water pump from the DG Set of capacity upto 40 KVA, opening the pump, replacing the pump repair kit complete as per manufacturer's recommendations, re-assembling and re-fixing the same and testing on completion complete all as specified and as directed.
All as per item No. 9 here-in-before but of capacity above 40 KVA and upto 75 KVA complete all as specified and as directed.
All as per item No. 9 here-in-before but of capacity above 75 KVA and upto 160 KVA complete all as specified and as directed.
Dismantling the defective self starter assembly carefully from the DG set of capacity upto 75 KVA and carryout repair and servicing by cleaning all accessories with suitable cleaning agent and supply and replace commutator, carbon brush set, carbon brush holder, king pin holder, armature check nut, clutch plate assy and solenoid etc. re-assembling and re-fixing the same and testing complete all as specified and directed.
All as per item No. 12 here-in-before but of capacity above 75 KVA and upto 160 KVA complete all as specified and as directed.
Dismantling the defective solenoid switch carefully from the DG set of capacity upto 160 KVA and supply and fix new solenoid switch suitable for engine stop all as existing capacity and make and testing complete all as specified and as directed.
Dismantling the defective battery charging alternator carefully from the DG set of capacity upto 40 KVA and carryout repair and servicing by cleaning all accessories with suitable cleaning agent and supply and replace carbon brush, brush holders, bushes, bearings, varnishing etc, re-assembling and re-fixing the same and testing complete all as specified and as directed.
All as per item No. 15 here-in-before but for DG set of capacity above 40 KVA and upto 75 KVA complete all as specified and as directed.
All as per item No. 16 here-in-before but for DG set of capacity above 75 KVA and upto 160 KVA complete all as specified and as directed.
Supply and fix in repair alternator terminal block suitable for DG Set alternator upto 160 KVA capacity
Taking down of existing gauges and Supply and fix following gauges suitable for DG sets complete all as specified and as directed.
(a) Digital RPM Meter
(b) Analogue RPM Meter
(c) Oil Pressure Gauge
(d) Oil Temperature Gauge
(e) Water Temperature Gauge
(f) Fuel Indicator Gauge suitable for fuel tanks of silent DG sets.
S& F in repair copper terminal heavy duty for battery (length 1.5 mtr) connection with suitable size of copper lugs on one side, brass lead on other end all as directed
Supply and wrap asbestos rope of 10mm thick over silencer of DG sets including taking down of existing u/s rope complete all as specified and as directed. Note: Length of silencer is measured for the purpose of payment.
Servicing of AMF Panel of DG sets of capacity from 15 KVA to 160 KVA by cleaning the complete panel with suitable cleaning agent and checking the controlled relays, time delay relay, contactors for proper functioning, replacing defective spare parts, replacement of defective wires of existing size, tightening of all connections and applying jelly on contactors including taking down existing unsv components complete all as specified and as directed.
Taking down U/S Genset controller, power contactor, Time relay, Battery charging unit, Voltage regulator, Logic relay and fixing only new items and making connections all as existing and as directed by Engr-in-Charge.
Note 22 & 23:- Spares required will be measured and paid separately as 'Supply Only' in relevant items.
Supply only the following Items suitable for existing DG Set AMF Panel :-
(a) Main Power Contactor 4P rating suitable for 15 KVA to 40 KVA DG Set.
(b) Main Power Contactor 4P rating suitable for 63 KVA to 100 KVA DG Set.
(c) Main Power Contactor 4P rating suitable for 125 KVA to 160 KVA DG Set.
(d) AMF Logic controller relay suitable for 15 KVA to 40 KVA DG Set.
(e) AMF Logic controller relay suitable for 75KVA to 160 KVA DG Set.
(f) Line Voltage Monitor 415V suitable for 15 KVA to 75 KVA DG Set.
(g) Line Voltage Monitor 415V suitable for 100 KVA to 160 KVA DG Set.
(h) Timer suitable for 15 KVA to 160 KVA DG set for ON/OFF delay.
(j) Relay module 12V DC suitable for 15 KVA to 160 KVA DG set.
(k) Battery charging electronic PCB for 25 KVA to 75 KVA DG Set.
(l) Battery charging electronic PCB for 100KVA to 160 KVA DG Set.
(m) Battery charger complete unit for 15 KVA to 75 KVA DG Set.
(n) Battery charger complete unit for 100KVA to 160 KVA DG Set.
(o) Auto/Manual switch complete assembly.
(p) Indicator lamp as existing on panel board (set of 3) all as specified and as directed.
(q) Engine start/stop push button.
(r) Analogue Voltmeter suitable for 3 Phase supply of existing description.
(s) Analogue Ammeter of suitable capacity of existing description.
(t) VAF meter of suitable capacity as per existing description.
(u) Engine controller unit suitable upto 160 KVA DG Set.
(v) Main Power Contactor 4P rating upto 70 Amps suitable for 15 KVA to 40 KVA DG Set.
(w) Main Power Contactor 4P rating upto 140 Amps suitable for 40 KVA to 100 KVA DG Set.
(x) AMF Logic controller relay suitable for 40KVA to 100 KVA DG Set.
(y) Battery charger complete unit for 75KVA to 100 KVA DG Set.
Taking down unsv AVR unit and supplay and fix new AVR unit suitable for DG set above 75 KVA and unto 100 KVA.
Taking down unsv AVR unit and supplay and fix new AVR unit suitable for DG set upto 75 KVA.
Taking down unsv AVR unit and supplay and fix new AVR unit suitable for DG set above 75 KVA and upto 160 KVA.
Servicing of APFC panel of capacity from 30 KVAR to 150 KVAR by cleaning the complete panel with suitable cleaning agent and checking all the components for proper functioning and replacing the defective components and providing suitable wires, lugs, nuts, bolts and washers required for connecting including taking down such as capacitor banks of suitable capacity, power contactors, contractor relays, power factor relay, switches and push buttons etc from the panel by disconnecting electric supply and testing complete all as specified and as directed. Note: Components / spares will be measured and paid separately as 'Supply Only', in relevant items. However the cost of suitable wires, lugs, nuts, bolts and washers required for connecting spare parts shall be included in quoted rate.
Supply only the following items suitable for APFC Panels as existing model:-
(a) Cylindrical type, 440V, MPP Capacitor, self healing capability, heavy duty to withstand high inrush currents, of capacity 5 KVAR.
(b) Cylindrical type, 440V, MPP Capacitor, self healing capability, heavy duty to withstand high inrush currents, of capacity 10 KVAR.
(c) Cylindrical type, 440V, MPP Capacitor, self healing capability, heavy duty to withstand high inrush currents, of capacity 15 KVAR.
(d) 3 phase, capacitor duty contactor, 415 volts, suitable upto 10 KVAR capacitors.
(e) 3 phase, capacitor duty contactor, 415 volts, suitable above 10 and upto 20 KVAR capacitors.
(f) 3 phase, capacitor duty contactor, 415 volts, suitable above 20 and upto 30 KVAR capacitors.
(g) Auto/Manual switch assembly of existing model.
(h) ON/OFF push button of existing model.
M&L for 8 stage APFC relay all as existing description comlete all as specified and as directed by Engineer-in-charge.
M& labour for CT coils of range upto 400A/5A complete all as specified and as directed.
Repairs the defective street light fitting on its own position of any description on poles at elevated height by disconnecting the electric supply and removing carbon in cables, holders, rectify loose connections if any, reconnecting all as specified and as directed.
Taking down, defective street light fitting of any description from pole elevated height by disconnecting the electric supply and replacing the defective components such as LED Driver, acrylic cover and burnt out wiring of suitable size and capacity, re-assembling and re-fixing in its original position and testing for proper functioning complete all as directed. Note: street/ security light fitting components such as driver and cables etc., as required will be measured and paid separately under relevant items of Sch 'A' as "Supply only" in relevant items.
Supply only the following items suitable for existing street light fittings :-
(a) LED driver suitable for upto 30W LED street light fitting.
(b) LED driver suitable for above 30W & upto 60W LED street light fitting.
(c) LED driver suitable for above 60W & upto 120W LED street light fitting.
(d) LED driver suitable for upto 35W LED street light fitting.
S&F LED street light fitting 30/35W LED made up of pressure die cast aluminium housing with PC cover as diffuser with minimum IP 66 protection complete including taking down old unserviceable fitting all as specified and as directed. Make: Havells / Crompton / Phillips /Syska / Bajaj / Wipro
All as per Item No 34 here in before but for 45 /48 W LED Street Light Fitting complete all as specified and as directed. Make: Havells / Crompton / Phillips /Syska / Bajaj/ Wipro
All as per Item No 34 here in before but for 60 W LED Street Light Fitting complete all as specified and as directed. Make: Havells / Crompton / Phillips /Syska / Bajaj/ Wipro
All as per Item No 34 here in before but for 70 /72 W LED Street Light Fitting complete all as specified and as directed. Make: Havells / Crompton / Phillips /Syska / Bajaj/ Wipro
All as per Item No 34 here in before but for 90 W LED Street Light Fitting complete all as specified and as directed. Make: Havells / Crompton / Phillips /Syska / Bajaj/ Wipro
S&F LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete including taking0 down old unserviceable fitting all as specified and as directed. Make: Havells / Crompton / Phillips /Syska / Bajaj/ Wipro
All as per Item No 39 here in before but for 100 W LED Flood Light Fitting complete all as specified and as directed . Make: Havells / Crompton / Phillips /Syska / Bajaj/ Wipro
All as per Item No 39 here in before but for 150 W LED Flood Light Fitting complete all as specified and as directed . Make: Havells/ Crompton / Phillips /Syska / Bajaj / Wipro
S&F post top lantern LED type 25 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp incl taking down old unserviceable fitting complete all as specified and as directed. Make: Havells / Crompton / Phillips /Syska / Bajaj/ Wipro
S&F in repair landscape LED luminaire 8 W aluminium body suitable for garden alongwith necessary concrete dedding , nuts, bolt, connector including connecting copper wire etc complete all as specified and directed. Make : Havells Cat No BAMBOOBLS8WLED830PSYMTOPC or equivalent in CG/ Bajaj
Lowering the high mast light fitting manually by disconnecting the electric supply and replacing the defective components including taking down existing components such as fittings, driver, and burnt out wiring, re-assembling after getting repaired and re-fixing in its original position, aligning high mast carraige and testing for proper functioning complete all as specified and as directed. Note: The components such as fittings, driver and cable etc as required will be measured and paid separately under relevant items of Sch 'A'.
Taking down existing unsv twin core cable and Supply and connect new PVC insulated twin core copper cable PVC round sheathed (flexible) of 2.5 sqmm complete all as specified and directed by Engineer-in-Charge.
Taking down old unsv terminal box and Supply and fix terminal box (looping box) out door type fixing on pole with and including of mild steel clamps with bolt and nuts, with internal copper wiring connection duly fixed with lock nut complete all as specified and directed.
Taking down unsv timer switch from the existing street light panel board by disconnecting electrical connection and supply and fix new timer Programmable timer Switch 24 Hrs including all electrical connections complete all as specified and as directed. Make : Crab Tree/ CG/L&T/GEC.
Taking down unsv power contactor S&F in repair Power contactor TP 32 Amps in existing street light control panel all as specified and as directed. Make : Havells/L&T/HPL/ABB/
Taking down unsv MCB from the existing street light panel or terminal box by disconnecting electrical connection and Supply and fix new MCB SP 6 Amps capacity ''C'' series complete all as specified and as directed.
Taking down unsv Aviation obstruction light from the elevated height of over head tank at a height of appx. 20 M, supply and fix new Integral LED aviation light comprising of aluminium housing with polycarbonate enclosure, LED driver and other accessories as required complete. Make: Bajaj, Model: BGAV 302 LED or its equivalent in Phillips/ Crompton greaves.
Supply and lay, LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of following sizes including taking down old cables complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items.
(a) 6 Sq mm 2core
(b) 10 Sq mm 2core
(c) 10 Sq mm 4 core
(d) 16 Sq mm 4 core
(f) 25 Sq mm 3.5 core
Excavation in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth in soft /loose soil for laying of LT cable complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in hard/dense soil complete all as specified and as directed.
Removing, surplus excavated material to a distance n.exc. 50 M and depositing where directed at a level n.exc. 1.5 M above the starting point complete all as specified and as directed.
Supply and spread sand in trenches or in cushioning to cable, in substation yard surrounding transformer all as specified and as directed. NOTE: For measurement purpose, punned down thickness shall only be taken.
Supply & laying well burnt bricks, sub class 'B' brick of size 230x115x75mm laid across trenches for cable protection all as specified and as directed.
Supply & laying tubes ' light grade' galvanised, with all fittings, fixed complete to walls, poles, ceilings or laid in floors/ trenches/ road crossing for protection of cables all as specified and as directed of size 40 mm doa bore.
M & L for Road cutting/ hard standing for taking up or laying of LT UG cable upto a depth of 15 cm, after laying of cable, well ramming to the excavated soil and repair the exvcavated portion of road as existing or by providing suitable mixture of PCC all as specified and as directed.
Servicing and mantanance of solar water heater, cleaning the solar panel by using CTC & soft cloth and adjusting to the proper direction, and replacing the defective parts/ components and testing including taking down unsv components, if required to replace complete all as specified and directed. Note: The parts/ components required will be measured and paid separately under relevant items of Sch 'A' as 'Supply only' in relevant items.
Supply only the following items suitable for existing Solar water heater :-
(a) Heating element of capacity 2 KW of solar water heater.
(b) Heating element of capacity 3 to 4 KW for solar water heater.
(c) Solar tubes all as existing evacuated tube collector type solar heaters
S&F Heavy duty Battery 12 V not less than 150 AH having polypropylene container with ribs, recharging capability suitable for DG Set and solar light and deposititing the old unsv battery to the store yard complete all as specified and directed
S&F Heavy duty Battery 12 V not less than 100 AH having polypropylene container with ribs, recharging capability suitable for DG Set and solar light and deposititing the old unsv battery to the store yard complete all as specified and directed
S&F in repair street light bracket made up of GI pipe light grade 32 mm dia length 1.5 RM bent to shape with MS clamps, bolts, nut & washers complete, including taking old bracket of any size all as specified and as directed
Taking down existing unsv twin core aluminium cable and Supply and connect new PVC insulated twin core aluminium conductor cable of 1.5 sqmm complete all as specified and directed by Engineer-in-Charge.
Taking down existing unsv submain wiring in steel/ PVC conduit and M&L for submain wiring with 2x1.5sqmm +1x1.5sqmm FRLS copper conductor cable drawn through stove enamelled steel conduit of size 20 mm dia, fixed to street light pole with suitable size FI clamps made of 20x3mm FI, from street light fittings to loop in loop out box complete all as specified and as directed.
Taking down unsv street light loop-in and loop out box by disconnecting electrical connection and removing existing clamps, nuts, bolts, and washers and Supply & Fix New Syntex PVC junction box, with comprising insulators, connectors etc. and with one SP MCB 6A ''C'' Series, one PVC way connector etc including suitable size clamps, nut bolts & washers complete including suitable clamps for fixing all as specified and directed.
Taking down unsv timer switch from the existing street light panel board by disconnecting electrical connection and supply and fix new timer Programmable timer Switch 24 Hrs including all electrical connections complete all as specified and as directed. Make : Crab Tree/ CG/L&T/GEC.
Taking down unsv MCB from the existing street light panel or terminal box by disconnecting electrical connection and Supply and fix new MCB SP 6 Amps capacity ''C'' series complete all as specified and as directed.
S&F in repair Power contactor TP 32 Amps in existing street light control panel all as specified and as directed. Make : Havells/L&T/HPL/ABB/
Taking down unsv Aviation obstruction light from the elevated height of over head tank at a height of appx. 20 M, supply and fix new Integral LED aviation light comprising of aluminium housing with polycarbonate enclosure, LED driver and other accessories as required complete. Make: Bajaj, Model: BGAV 302 LED or its equivalent in Phillips/ Crompton greaves.
S&F in repair New generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire 25W complete all as specified and as directed. Make: Havells, Model No:CORALPT25WLED757PSYMTOPC or equivalent in CG, Phillips
S&F in repair LED flood light fitting 120W LED made up of die cast aluminium housing with acrylic cover as diffuser with minimum IP 66 protection complete with bolts, nuts etc for fixing, complete all as specified and directed. Make: Bajaj / Havells / CG /Phillips
S&F in repair LED flood light fitting 150W LED made up of die cast aluminium housing with acrylic cover as diffuser with minimum IP 66 protection complete with clamps, bolts, nuts etc for fixing all as specified and as directed. Make: Bajaj / Havells / CG / Phillips
S&F in repair landscape LED luminaire 8W aluminium body of minimum height 0.6 m suitable for garden alongwith necessary concrete bedding, nuts, bolts, connector, connecting copper wire etc, complete all as directed. Model No- BAMBOOBLS8WLED830PSYMTOPC of Havells or equivelent in CG / Phillips.
S& F Heavy duty Battery 12 V not less than 150 AH having polypropylene container with ribs, recharging capability suitable for DG Set and solar light and deposititing the old unsv battery to the store yard complete all as specified and directed
S& F Heavy duty Battery 12 V not less than 100 AH having polypropylene container with ribs, recharging capability suitable for DG Set and solar light and deposititing the old unsv battery to the store yard complete all as specified and directed
Srinivash Engineers (BID ID -3383181)
OM SAI POWER SYSTEMS (BID ID -3384278)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .