Karnataka

Active

Works

Buildings

CONSTRUCTION OF ADDITIONAL TWO CLASS ROOMS BUILDING AT ADARSH VIDYALAYA YADRAVI SCHOOL TALUK SAUNDATTI. Belagavi Dist DISE CODE 29011208102.

Rural Development and Panchayat Raj Department

RDPR Division Office Belagavi | Belagavi, Karnataka

Amount: ₹15.0 LCloses: 29 Jul 20263d left

Timeline

Published17 Jul 2026
Closes29 Jul 2026
Bid Opening31 Jul 2026

Tender Value

₹15.0 L

EMD Value

₹22,125

Closing Date

29 Jul 2026, 11:00 pm3d left

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

Executive Engineer

Office Number

08312407230

Mobile Number

9606981050

Work Description

CONSTRUCTION OF ADDITIONAL TWO CLASS ROOMS BUILDING AT ADARSH VIDYALAYA YADRAVI SCHOOL TALUK SAUNDATTI. Belagavi Dist DISE CODE 29011208102.

Tender Information

Tender ID

RDPR/2026-27/BD/WORK_INDENT27734

Reference Number

RDPR/2026-27/BD/WORK_INDENT27734

Tender Type

Reserved

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

RDPR Division Office Belagavi

Source Website

Subscribe to view

Documents Required

9 documents required · 9 mandatory

Technical Bid

RequiredPRED/PWD Registration Certificate

RequiredTenderer must Submit PAN & GST Certificate.

RequiredSC Category Reservation Certificate and Domicile Certificate

RequiredWork orders /commitments of ongoing works issued by an officer not below the rank of Executive Engineer

RequiredWork done certificate for any nature of Work from Competent authority Rank of Executive Engineer & above

RequiredLine of Credit Should be in the Bank Letter Head Format

RequiredAnnual Turnover Certificate for at least last five years

RequiredUDIN is Preferred

RequiredName and Address of Contractor for Communication

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of kppp-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

For Details Refer Tender Notification And Conditions In The Bid Documents.

All materials should be in good quality as per specification, quality certificate for the same should be obtained from the concerned authority at their own cost.

All the scanned documents pertaining to bidder to be uploaded shall be in original and same originals should be produced to the Executive Engineer (at the time of Technical Bid Opening) who reserves right to verify the original documents before approval.

To qualify for award of this contract, each tenderer should give all details and documents as per Technical and Financial bid attached to this tender.

All the materials to be utilised for the work must be tested in PRED labs and Quality control test reports must be enclosed to the bills. All type of Pipes and Pumping Machinary with accessories must be tested in M/s. SGS India LTD, CIPET & AIPS institutes. Cost of all QC test must be borne by contractor.

If any date in the tender time table is government holiday, next working date will be considered

Incomplete / conditional tenders will not be accepted.

Executive Engineer PRED Belgaum has authority to accept or reject any tender without assigning reason

Tenderer must submit his present accurate postal address and phone / cell phone number

The tender may be cancelled at any stage without assigning any reason

Tenderers must have valid PRED/PWD registration and must submit PRED/PWD registration copy

Any objection regarding the tender must be submitted directly to Executive Engineer , not in inward.

For interpretations of clauses, conditions, spelling mistakes, etc. decision of Executive Engineer, PRED, Belgaum is final.

Successful bidder submitting bids below the amount put to tender will be regularized to submit the difference amount in the form of FDR/TDR/DD/Pledge on the name of EE PRED Belagavi within 20 days from the date of receiving the letter of acceptance. additional security paid for unbalanced tenders Failing which EMD will be forfeited and further action will be taken as per G O No FD PCL 2008 Bangalore Dated 14/10/2008.

As per Government order No. FD 56 PWD cell 2004, Bngalore, 18th Janury 2005, The contractor shall be made responsible for submiting e-bills duly suported the hard copy of detailed measurements of work. using electrinic spreadsheets and making computation thereof. The conctractor shall submit diskette/ CD room in addition the hard copy.

The tenderers must submit the scanned documents in pdf / jpeg form, not in other form and which are should not be corrupted files. If it shows errors while opening the documents the employer is not responsible. Hence the such files will be considerd as un submitted.

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2021-22, 2022-23, 2023-24,2024-25, & 2025-26 achieved in One financial year should be more than financial turnover of Rs. 14.97Lakhs (in all classes of civil engineering construction works only)

The Tenderer shall obtain Any Nature of Work done certificate will be Considered financial years of 2021-22 to 2025-26 (25% of the Amount Put to Tender) i.e Rs.3.74 lakhs in the prescribed format from the Competent Authority not below the rank of Executive Engineer(District Level Officer) and scan the Original Certificate and attach the scanned file to the Bid.

Tenderer must have liquid assets and /or availability of credit facilities of not less than 30% amount Put to Tender (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. for three months of Rs. 4.49Lakhs (LOC letter should be unconditional format)

THIS WORK IS RANDOMISED AS SC CATEGORY OF WORK And Domicile Certificate

Single Tender Will Not Be Accepted

Bidder should submit completed work, Work done certificate if in case they submit the workdone certificate as on ongoing work. Such Bidder will be disqualified

Technical Criteria

Financial Status

PRED/PWD Registration Certificate

PWD Registration Certificate (Class I/II/III/IV)

Tenderer must Submit PAN & GST Certificate

GST Registration

SC Resrvation Category And Domicile Certificate

Others -- Reservation Category

Work done certificate for any nature of Work fromCompetent authority Rank of Executive Engineer & above

Work Done Certificate

Work orders / commitments of ongoing works issued by an officer not below the rank of Executive Engineer

Work Done Certificate

Line of Credit WITH Bank Letter Head

Line of Credit

Annual Turnover Certificate for at least last five years

Audited CA Certificate of Annual Turnover

UDIN is Preferred

Audited CA Certificate of Annual Turnover

Accurate postal address and phone / cell phone number

Others -- Name and Address of Contractor for Communication

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹22,125

Important Dates

Last Activity

17 Jul 2026

Published

17 Jul 2026

Bid Opening

31 Jul 2026

Download Ends

29 Jul 2026

BOQ Preview

•

CONSTRUCTION OF ADDITIONAL TWO CLASS ROOMS BUILDING AT ADARSH VIDYALAYA YADRAVI SCHOOL TALUK SAUNDATTI. Belagavi Dist DISE CODE 29011208102.

•

Estimate for Civil work GF

•

1.12 Earth work in surface excavation by mechanical means for lowering &leveling the ground for all works other than foundation in all kinds ofsoils & upto depth not exceed...

•

1.14.1 Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting...

•

2.1.3 Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine ...

•

5.1.1 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal si...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

•

FORMWORK FOR FOOTING: Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes ...

•

FORMWORK FOR PLINTH BEAM: Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Cod...

•

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportat...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite / t...

•

FORMWORK FOR COLUMN FROM FOOTING TO PLINTH TOP: Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure work...

•

2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3...

•

FORMWORK FOR COLUMN : Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of ...

•

2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3...

•

FORMWORK FOR LINTEL, SLAB BEAM :Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Dr...

•

2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3...

•

FORMWORK FOR CHAJJA: Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of b...

•

2.5.2 Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3...

•

FORMWORK FOR SLAB : Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of b...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

11.32 Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and an...

•

6.2 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 ceme...

•

11.34A Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed ...

•

12.84 Providing & fixing of 2 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic E...

•

12.12 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of ceme...

•

12.15 Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as p...

•

12.51 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size...

•

8.8 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster ...

•

8.1.1 Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing ...

•

9.3 Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement...

•

9.17.2 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approve...

•

8.51 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the ...

•

8.32 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of req...

•

8.29 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied 1.67 ltr/10 m over and including priming coat of exterior primer applied 2.20 kg/10 m) with paint...

•

8.45.2 Varnishing with varnish of approved brand and manufacture :Two coats glue sizing with spar varnish or an under coat of flatting varnish to give an even shade and produce a smooth dry and mat su...

•

11.26.1 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel...

•

8.34.3 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after th...

•

8.4 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, du...

•

8.16A Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixing chicken mesh for drop chajja, facia, backing to c...

•

Providing Green Board with all lead lifts loading & unloading charges including cost and conveyance of all materials labour equipments, HOM of machinary and other incidental charges required for succe...

•

9.6.1 Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbi...

•

12.69.2 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc.125mm with all lead lifts loading & unloading charges including cost and conveyance of all m...

•

Providing and fixing Hold fasts M.S. for doors etc complete with all lead lifts loading & unloading charges including cost and conveyance of all materials labour equipments, HOM of machinary and othe...

•

Providing and fixing Door Locks approved make and quality including cost and conveyence of all maerials with all lead and lift. etc complete with all lead lifts loading & unloading charges including...

•

12.63 Providing and fixing aluminium tower bolts, ISI marked, anodised (an- odic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary sc...

•

Providing and fixing Screws approved make SS Screws of sizes for structural glazing /ACP Cladding ( Material Components P.No - A28 I.No 548 Code No : 0548) with all lead lifts loading & unloading...

•

Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mi...

•

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at an interval of 300 mm as required.25mm

•

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screws at

•

an interval of 300 mm as required.30mm

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated c...

•

Supplying and wiring adopting loop system in existing PVC Conduit

•

/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated c...

•

Supplying and wiring adopting loop system in existing PVC Conduit

•

/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated c...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring w...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring w...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring w...

•