PHASE WIRE WORK ON ELECTRIC POLES IN WATER LOGGED AREA IN VIDHYADHAR NAGAR ZONE.

Amount

supplying installation testnig commissionging CCMS PANEL of 10 KVA switch have Features – 1. Schedule the timing of lights (pre-programmed based on astronomical clock or on field or through central control) 2. CCMS shall able to measure Voltage, Current, Power Factor, Active Power, Apparent Power, Metering Cumulative Active Energy, Metering Cumulative Apparent Energy. 3. Enclosure should be made of fire retardant FRS/SMC material 4. Communication – GSM/GPRS communication between CCMS and Cloud server 5. Alerts – i. Phase wise over current/Short circuit ii. Phase wise over voltage iii. Group failure of lights iv. No input supply v. Tempering of door vi. Low Power Factor Detection. Vii. Under load and over load detection. 8. Energy-meter – 1 phase Class 1.0 accuracy meter with ISI/IS-13779 Secure / L&T Make 9. Battery Backup – CCMS supports battery backup up to 10 hours. 10. CCMS Unit shall have analog measurement capability 1 x Analog voltage, 1 x Current input measurement channels 11. Switch gear protection against fast grid switching, overall protection against short circuit and overload. 12. CCMS shall have manual operating switch in case of failure of CCMS controlling unit. 13. Local storage for 30 Day using inbuilt EEPROM 14. Google maps overlay for live status monitoring of CCMS. 15. Total monthly/weekly/daily power consumption, on time and saving info. 16. Configuration for user hierarchy from the GUI. 17. Incomer : MCB 63 Amp,Latch Relay : 60 Amp, Outgoing MCB : 63 Amp 18. SPD : 440 Volts Parallel SPD 20 KV 19. All Switchgears should be L&T/ABB/Scheinder Make

Providing and Laying RCC Foundation for Octagonal / Conical/TUBULAR Street Light poles, High mast Poles as per Drawing attach with Following Procedure & All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . A) Excavation of Pit for Foundation Size upto required depth from Ground level B) Dressing of Pit and Dry stone pitching 200 mm thick including supply of stones and preparing surface complete. C) Providing and laying in position cement concrete of M-10 grade of 75 mm thickness D) Reinforcement for R.C.C. work with TMT bars including straightening, cutting, bending, placing in position and binding all complete. E) Centring and shuttering including strutting , propping etc. and removal of form work for Footing and Pedestal F) Providing and Laying Reinforce cement Concrete of M-25 grade in Footing and Pedestal including Curing the foundation for 7 days. G) Providing and Fixing Nosing Angle 40 mm x 40 mm x 6mm with 2 no. 100 mm long, 10 mm dia. Lugs on each face

shifting of existing ccms panel on pcc panel accoding Ali/Jen/Aen instruction

M/s Adarsh Electrical And Contractors

sonu enterprises

M/S Anshika enterprises

sonu enterprises

A.K.CONSTRUCTION CO.

M/s Adarsh Electrical And Contractors