SPECIAL REPAIRS TO ROAD AND ROAD FURNITURE NEAR BLDG NO P 134 NECKLACE ROAD AND NEW MULTI AREA AT MILIT GIRINAGAR PUNE 411025

Amount

Repair to pot holes any depth not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc cutting around edges to at least 25 mm in depth making good by applying tack coat of paving bitumen VG-10 @ 5 Kg/10 Sqm putting in premixed bituminous macadam, well rammed and sealed with binder with 6.80 kg per 10 sqm, blinded with 0.06 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of pot holes exc 30 mm complete all as specified and directed.

Preparation of existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning with gunny bags to remove all loose dirt etc. and applying evenly a tack coat of paving bitumen VG-10 conforming to IS:W-73:2006 @ 5 Kg/10 Sqm of road surface with mechanical sprayer, operated by hot pressure mechanism complete all as specified and directed.

M&L for providing and laying 75mm or less thickness (Consolidated thickness) premix bituminous macadam (design mix) with crushed and graded coarse stone aggregate filler (cement) and sand (fine aggregate) mixed with 4% binder content (using paving bitumen VG-30 grade by weight of total mix), mixing bituminous macadam in hot mechanical plant and laid with mechanical paver complete rolled with 8 to 10 tonne power roller to required camber and gradient complete all as specified and directed. Note :- (i) The design mix for BM considering bitumen content as specified shall be carried out by contractor from approved NABL Lab / Institute / Govt Engg College as directed and design charges thereof shall deemed to be included in the unit rate quoted by the contractor.

M&L for providing and laying bituminous premix asphaltic semi dense concrete 30mm consolidated thickness with 5.5% binder content VG-30 conforming to IS: W-73:2006 paving bitumen content by weight of total mix, rolled and compacted to required camber and gradient by using 8 to 10 ton power roller complete all as specified and directed. Note:- (i) Mixing of SDAC shall be carried out in Hot mix plant and laying, spreading of SDAC shall be carried out uniformly by using automatic type censor paver. (ii) The design mix for SDAC considering bitumen content as specified shall be carried out by contractor from approved NABL Lab / Institute / Govt Engg College as directed and design charges thereof shall deemed to be included in the unit rate quoted by the contractor.

M&L for road marking 2mm thick centre line, Side line, stop line, dashes, arrows, barckets and similar work on road surfaces as per IRC pattern with thermo plastic paint of approved quality and make with 8% glass beads laid at temprature 1600 C with a special applicator machine complete all as per manufacturer's instructions and traffic diversion arrangement complete all as specified and directed. Make :- CMS Bombay/Shivalik Prime-Chandigarh/Ritactor-Meerut/SN Industries-Delhi/Reliance Thermoplast-Delhi/CMS Traffic System Ltd, Mumbai

M&L for preparation of old plastered surfaces of kerb stone of any description over 10cm girth or width and applying two coat of synthetic enamel paint complete all as specified and directed.

S&F in repairs solar delinator with metal body of 48mm outer dia,74 flash per/minute and 1000mm height, delinator shall be fixed in plain cement concrete 1:2:4 type B1 (using 20mm graded stone aggregates) block of size 300 x 300 x 350mm deep, including necessary excavation & earthwork and required formwork complete all as specified and as directed. Note :- (i) Delinator shall be of model solar 48 OD SKU-DEL-SOLAR of Make DARK EYE or equivalent in specified makes and approved. (ii) Reflectors shall be positioned at the best eye guiding level so that drivers shall be warned from a safe distance. (iii) Old unserviceable delinators shall be contractor's property as per schedule of credit.

Manufacturing, supplying and fixing retro reflective Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per manufacturer's instructions and as per directions of EIC. NOTE:- (i) Existing unserviceable/damaged signage boards shall be taken down by the contractor & cost thereof shall deemed to be included in quoted rate. (ii) Area of old U/S signage boards shall be measured at site and shall be considered as contractor's property as per schedule of credit.

MOHANLAL MATHRANI CONS. PVT. LTD.

PAVEWAY CONSTRUCTIONS PRIVATE LIMITED

sagar construction