Digital Library Construction work GP KHIYERA

work detial

Earth work in foundation excavation up to 1.5m, ramming bottom, dressing sides, back filling and disposal of surplus soil with in a lead of 50m.

Cement concrete in foundation and plinth with stone ballast size 40mm including curing and compaction etc in 1:4:8 mix

Brick work in foundation and plinth using bricks of class designation-75 in CM 1:6

DPC with RCC 1:1.5:3 mix

Brick work in super structure using bricks of class designation-75 in CM 1:6

Reinforced cement concrete work including curing compaction, finishing with rendering in cement sand mortar 1:3 and making good and joints excluding cost of centering, shuttering and reinforcement in 1:1.5:3 (1cement: 1.5course sand: 3-graded stone aggregate 20mm nominal size)

Providing and fabricating reinforcement for RCC work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) in foundation and super structure up to 4.5m height above plinth level hot rolled deformed (IS: 1139) cold twisted (IS: 1786) bars

Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways with wooden members and removal of from work

Cement concrete in foundation and plinth with stone ballast size 40mm including curing and compaction etc in 1:3:6 mix

S & F Mosaic tiles on roof

20mm thick plaster on new work including curing and racking of joints in CM 1:6

Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete (PWD BSR-2022 - Less-10%)

Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding.New work ( Two or more coat incuding base coat of water proofing cement paint) -(PWD BSR -2022 Less- 10%)

Wall painting with plastic emulsion paint of required shade including all scaffolding.New work ( Two or more coat incuding base coat of water proofing cement paint) -(PWD BSR-2022 Les-10%)

S &F Iron door

Fixing of Iron door

Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots Brass handles peg stay

S&F wire mash on iron Window

S&F Iron Grill on iron Window

Enamel painting on door and window

Earth work in filling with ordinary soil

Carriage of earth-lead Two KM

Cement concrete in floor with stone ballast size 40mm including curing and compaction etc in 1:6:12 mix

S & F Polished Kota stone flooring

S & F Glaze tiles on walls

Earth work in foundation excavation up to 1.5m, ramming bottom, dressing sides, back filling and disposal of surplus soil with in a lead of 50m.

Brick work in foundation and plinth using bricks of class designation-75 in CM 1:6- 112mm thick

Brick work in foundation and plinth using bricks of class designation-75 in CM 1:6

20mm thick plaster on new work including curing and racking of joints in CM 1:6

Reinforced cement concrete work including curing compaction, finishing with rendering in cement sand mortar 1:3 and making good and joints excluding cost of centering, shuttering and reinforcement in 1:1.5:3 (1cement: 1.5course sand: 3-graded stone aggregate 20mm nominal size)

Providing and fabricating reinforcement for RCC work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) in foundation and super structure up to 4.5m height above plinth level hot rolled deformed (IS: 1139) cold twisted (IS: 1786) bars

Wiring for fan/light point in PVC condut pipe as per specification

Wiring for light/Power point in PVC condut pipe as per specification

Wiring for circuit/submain as per specification- 2x1.5Sqmm

S & F MCB

Plate Earthing as per IS:3043 with Hot dipped G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . (PWD BSR-2022 Les-10%)

S & F PVC water storage tank

S & F Bib cock

S & F wash basin

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1 metre spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall) ( PWD BSR -2022. Less-10%) 20mm nominal size

S & F Full way valve-25mm

S & F Urinal

P & L PVC pipe-110mm

S & F Europian WC pan

S & F Cistern

Almira

Laptop, Computore, Printer.

Chairs

Furniture work

Yojna board & contingency charges