REPAIR/REPLACEMENT OF ROOF SHED, ROLLING SHUTTER, GATES AND JOINERY WORK TO CERTAIN BLDGS. AT JASAI MIL STN UNDER GE (A) BARMER

Amount

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified.

S & F Pressed steel frames made of MS sheet of 1.20mm thickness of size 165 x 60 mm for doors with single or double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts, PCC 1:3:6 type C-0 in fillinng inside frame & hold fasts etc complete all as specified. (Note :- Distrubed protion of existing floor/ wall/ tile/ plaster etc during fixing of chowkhats shall be repaired to match with exisitng finish. Cost of the same will be included in this items). As approved by Accepting Officer

All as per item No. 2.00 here-in-above, but size 105 x 60 mm

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified.

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each and complete all as specified and directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as specified and as per drawing.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification incl the fwg S & F As approved by Accepting Officer (a) Stainless Steel (304 Grade) Finished Tower Bolt 150mm long - 2 Nos per leaf (b) Stainless Steel (304 Grade) Finished Handles 150 mm - 2 Nos per leaf

Supply and fixing 30mm thick flush shutters, solid core construction, with block board core and plywood face panels,commercial type on both sidesa all as specifid and directed incl S & F fwg items As approved by Accepting Officer. (a) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (b) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm-1 No per leaf (d) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 No per leaf

S & F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-I section 8 clause 8.20 (a) kiln seasoned and chemically pressure treated all as specifeid including stainless steel 304 grade wire cloth ( 0.36mm nominal dia of wire and average width of aperture 1.40 mm ) and incl supply and fixing following items:- (a) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf (b) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x3000mm - 1 nos per leaf (d) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos per leaf

S&F 100mm size SS butt hinges and fixed to PVC frame /Wooden Frame and angle iron frame by necessary welding complete all as directed.

S&F for mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description, over 10cm in width or girth, not otherwise specified with two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Dismantling boarding, of Aluminium / Ply / Wooden of any description, fixed in any position with screws. complete all as specified and directed

M&L for anodised aluminium frame and shutter for door, window, ventilators, partion and sliding shutters etc with one or more rebates including jointing cleat, aluminium snap beading 20 x 15mm, rubber gasket, glazing clip for fixing etc .complete all as specified and directed by Engr in charge.

S&F anodised aluminium grill made out of 7mm x 4.5mm w'ide flat, square ractangular or similar section, fixed with channel of size 38mm x 12mm x 13mm (section 8778 complete all as specified including taking down (make: DECO GRILL No. DG 102 with aperture- 80mm or equipment as approved by GE.

S&F 4mm thick tinted sheet glass of approved make and shade/tint filling in aluminium panels door/window/partion with necessary joining cleats, beading all as specified and directed.

S&F 12 mm thick Prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work

S&F in repair stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staples or with aluminium / wooden beads, stainless steel screws and nuts bolts etc for ventilator complete all as specified.

S&F brass 4 levers mortice lock, vertical type, size 100mm for aluminium door complete all as specified and directed

S&F Aluminium door closer hydraulically aluminium die cast body regulated designation No. 2 universal type (ISI Make) suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 Kg complete all as specified.

S&F double action floor spring hydrucally regulated made up of aluminium 1.25 mm thick aluminium alloy sheet fofoundation box,main body with stainlesssteel cover governing pivot made of brass, other parts made of mild steel heavy duty

S&F powder coated aluminium, three track sliding window frame of section size 92.00x 31.75x1.3mm comprising of one No of fly proof shutter and two nos of glazed shutter frames of section size 32x18x1.3mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement all as specified and directed. (Notes. (i) Glass filling in panels of window and stainless steel wire mesh/wire cloth shall be demed to be included in the quoted rate for the item, ii) stainless steel wire cloth in panels of fly proof shutter shall be 0.36mm nominal dia of wire and avg width of aperture 1.40mm, fixed with aluminium wire staples,. iii) Glass filling in panels of glazed shutter shall be 4mm thick tinted sheet glass of approved make and shade/tint (Make of aluminium sections powder coated: Make Jindal/INDAL/Hidalco).

Repair of existing aluminium door/ window shutter including frame with completely/partially taking down door/ window shutter and tightening of all screws, replacing rubber, clits etc including provision of unservicable hinge, handle, lock, aluminium plate & floor door stopper and as directed by Engineer-in-Charge.

Resecuring or easing and adjusting without taking down shutters of any description exc 1 Sqm but n.exc. 2 Sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each and refixing in same opening after cutting by chishel or hand saw, peeling by plane, fixing/ re-placing of hinges, repairing etc including all nales screws, pieces, small let in for making good where hinges, etc. have been removed from chowkhats or frames, shutters, etc. including painting or oiling to match, if required complete all as specified and as directed. (Note : Hinges and other accessories shall be measured and paid separately)

S & F in repairs mortice lock brass 4 levers vertical type with handle, size 100mm complete all as specified and as directed. Universal / Sandhu / Godrej (ISI Marked) all as specified and directed approved by accepting officer

S&F in repair Aluminium door closer hydraulically aluminium die cast body regulated designation No. 2 universal type (ISI Make) suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 Kg complete all as specified.

S&F in repair double action floor spring hydrucally regulated made up of aluminium 1.25 mm thick aluminium alloy sheet fofoundation box,main body with stainlesssteel cover governing pivot made of brass, other parts made of mild steel heavy duty

Hacking out old broken glass [any thickness, size, quality or description] from metal frames including punching or drilling out old glazing pins / spring clips complete all as specified and as directed.

S&F sheet glass, ordinary quality 3mm thick fixed with oil putty size of glass not exceeding 0.50 Sqm in each pane complete all as specified and directed

S&F for 3mm thick figured glass, pin head type and glazing with putty in square not exceeding 0.50 Sqm in each pane complete all as specified and as directed.

S&F toughned glass 12 mm thick as in hinged doors, partition, automatic doors and similar work including cutting to shape, drilling holes, fixing of stainless steel hinges, handle etc as reqd. complete all as specified and as directed.

S&F in repair Stainless steel tubing of 20 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets & finials fency type, stops fixed with ss screws etc all as specified & directed as in repair . Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered as approved by accepting officer.

S & F in repairs aluminum anodised barrel tower bolts of extruded section 150 mm long, bearing ISI mark, complete all as specified and as directed.

S & F in repairs 200 mm long aluminium barrel tower bolts stove enamelled black, with bright bolt and fixed complete all as specified and directed

S & F in repairs Aluminum anodised bow handle, bearing ISI mark, fabricated type extruded section of 150mm long complete all as specified and as directed.

S & F in repairs aluminum aodised sliding door bolts of 300mm long with hasp and staple(bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, bearing ISI mark. complete all as specified and directed.

S&F in repairs 140 mm floor door stopper of aluminium alloy body and tongue , anodised ,with hard drawn steel spring ,fixed in floor complete all as specified and directed

Supply and fixing in repair 100 mm MS butt hinges medium weight cold rolled mild steel ISI marked fixed with wooden screws complete as specified and directed.

S&F in repair for mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding complete all as specified and as directed.

Dismantling of Wall panneling and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing, Complete all as specified and directed

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, fixing of pvc strip on joints of door/window etc. complete all as specified and directed

M&L 4 mm thick E-board Tile false ceiling with powder coated GI snap grid frame work complete all as specified and directed include all necessary drilling, cutting making good and necessary arrangement to fix electrical item as under:- (a) 25x25x1.5 mm thick GI Tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders with adjustable clamps and dash free fastners plugging in RCC slab placed @ 600mm centre to centre from perimeter wall. (b) 25x25x1.5 mm thick GI angle powder coated plugged @ 600mm center to center along perimeter of wall. (c) Fixing of 4mm thick E-Board tiles of size 595x595 mm of approved texture, and finished complete with two coats of oil emusion distemper on disturbed portion of ceiling/wall of approved Tint/ Colour shade over a coat of Primer, if reqd complete all as specified and as directed. NOTE: The complete ceiling work shall be done as per manufacturers instruction and as directed.

M&L for welding in repairs exc 2.5cm but n.exc 5 cm in length Thickness of metal to be welded N exc 6mm complete all as specified and as directed.

Dismantling of plain or corrugated steel sheets in roof coverings any type complete all as specified & directed by Engineer in charge.

S&F Pre- painted galvaiume aluminum zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping crews as specified complete all as specified and directed

Dismantling structural steel work including doors gates but excluding framed truss etc complete all as specified and directed

S&F for hollow,rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conf to Fe-410-w or E -250 quality A complete all as specified and directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc. complete drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified and directed.

M&L applying two coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer including surface preparation complete all as specified and directed.

Demolition of concrete in ground floors and paving n exc 15cm thickness (below or above ground level ) complete all as specified and directed

M&L providing cement concrete type C-1 (1:3:6) using 20 mm graded stone aggregate as in lintel upto 1.5m clear span. Cill,steps; seismic and other milar bands ,plinth coorses ,string courses,lacing cources ,parapets and railings upto 60 cm in height ,coapings , kneelers,apex stones bed plates ,water troughs, fixing AC sheet pillar and the similar items including s, incl weathering, slighting rounded or chamfered angles and throating all as directed and specified.including form work complete all as specified and directed

S&F in repair BWP/Marine Pllywood for, Shelves, Cup Boards, wardrobes, Kitchen Cabinets, moduler kitchen etc 18/19 mm thick, as per directed with one side decorative laminated sheet (sunmica) not less than 0.9mm thick and other side plain white laminated sheet as reqd, and fixed using self tapping SS screws, fevicol etc. complete all as specified and directed.

S&F stainless steel bow handle not less than150mm long, complete all as specified and directed.

S&F stainless steel frog hinges suitable for Shelves, Cup Boards, wardrobes, Kitchen Cabinets etc for smooth movement. complete all as specified and directed.

S & F of hydraulic cabinet lifter having size 300mm long for wardrobe / overhead kitchen cabinet etc, complete all as specified and directed by Engg-in-charge.

S & F telescopic drawer channel having length not less than 450 mm long. Complete all as specified and directed.

S & F in repairs of stainless steel modular perforated cutlery basket SS 304 size not less than 500x440x100 mm with heavy duty and grade steel with finish of zinc, corrosion resistance telescopic drawer channel having weighing capacity of 15-20 kg complete all as specified and directed.

S & F in repairs of stainless steel glass tray / plate perforated basket having size not less than 500x440x150 mm, corrosion resistance telescopic drawer channel complete all as specified and directed.

S & F in repairs of stainless steel plain perforated basket SS 304 size not less than 500x440x200 mm with heavy duty and grade steel with finish of zinc, corrosion resistance telescopic drawer channel having weighing capacity of 15-20 kg complete all as specified and directed.

M&L for servicing of iron door (size 3.70 x 3.90) m, front open, making it operational including application of grease, cleaning of sliding channel, making good defective parts like hinges, stopper, icluding welding if required, making operational throughtout the period of contract complete all as specified and directed. (Note: Unit rate quoted against this item shall deemed to be inclusive of all the above provision per unit i.e. each shutter and shall be assumed to be inclusive of arrangement for fixing iron doors by engaging cranes (Hydraulic)/ manual methods as per site requirement.

S&F in repair aluminium composite panel not less than 3.0mm thick and including covered both side by encapsulated lens type retro reflective sheet (grade 3M type II diamond grade of make 3M/dark eye/SNI) green base, with and including all type and any size of writing letters and symbols of reflective type fixed on all as directed by Engr-in-charge.

M & L for repairs and servicing of rolling shutters and removing of worn out components wherever required such as hood covers, laths, ball bearings, helical wire springs, lock plates, bracket plate, shaft pipe and straightening of existing guide channels, gear boxes, laths, hood cover at required places including greasing and welding and refixing in the same opening for smooth functioning and making good the disturbed surfaces of walls to match with existing complete all as directed by the Engineer-in-Charge

Devi Engineeing (BID ID -3369984)

m/s jogaram sujaram (BID ID -3370056)