Renovation of Hirikere Pump House unit in Nagamangala Limits

Refurbishment of Hirikere Pumphouse Unit At Nagamangala TMC Limits

Providing and fixing DI Resilient seated soft sealing SLUICE VALVE ofvariouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865with the latest amendments and of grade GGG 40/50, shaft o...

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments

Dismantling tile work in floors and roofs laid in cement mortar includingstacking material to the appropriate disposal area as per direction of Engineer-in-charge.For thickness of tiles 10 mm to 25 mm

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...

Providing and laying red oxide flooring 40 mm thick, with an under layerof 30mm thick M-15 cement concrete and top layer of 10mm thick plasterwith 1:3 cement mortar mixed with red oxide finished with ...

Earth work excavation by manual means for drains, canals, waste weir,draft,approach channels, key trenches, foundation of Buildings & bridges and suchsimillar works in all kinds of soils, as per drawi...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labouing, including cos...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...