Miscellaneous civil repair works and A/R and M/O to T.E. Building, S/Qtr and Compound wall at Madhuban, OA- Mau

Amount

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :

30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade.

Old work (one or more coats) .

White washing with lime to give an even shade :

Old work (two or more coats) .

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work :

75 mm diameter pipes .

100 mm diameter pipes .

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

One or more coats on old work.

Finishing walls with Acrylic Smooth exterior paint of required shade :

Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface).

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge.

With cement mortar 1:4 (1 cement : 4 fine sand)

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:

Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete :

Old work (two or more coats)

Replacing damaged G.I. Jali in Jali doors/windows i/c cost of material & labour all complete as per direction of Engineer-in-charge.

Uprooting and cutting plants grown on the walls/terrace of buildings i/c dismentling brick/stone work wherever required and making the same good, complete as per directios of the Engineer in Charge.

Cleaning of over-head tank by dewatering, removing the sludge, rubbing & cleaning with bleaching powder i/c writing date of cleaning on the tank, etc. all complete as per directions of the Engr.-in-charge .

P/F PVC cover to over head PVC water storage tank i/c necessary nuts & bolts etc all complete as per direction of Engineer-in-charge.

Arranging electric welding machine at site for repairing works etc. with necessary cables and other T&P including the cost of operator and electrodes but excluding the cost of necessary steel sections complete as per direction of Engineer-in-charge. (Note: One day or part day work at one site shall be taken as one job.)

Providing manual assistance for plumbing sewer, masonry & carpentry work which are not covered in scheduled items and are not possible to measure.

Providing assistant for maintenance purpose.

Cleaning septic tank up to capacity of about 20-60 cum including removal of sludge, silt, garbage etc. all complete as per direction of Engineer-in-charge.

Cleaning of manhole including removal of sludge, silt, garbage etc. all complete as per direction of Engineer-in-charge.

M/s Tripty and Associates (BID ID -885621)