M/o various colonies under Nazul A/c-II Dwarka Zone.

LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥120 <135 lm/Watt) Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 °C to 50 °C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI ≥70, under voltage and over voltage protection, EMI-EMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours with70% of initial Lumen maintained till life ends as per LM80extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation ColourMatching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable andearthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test reportand all testing required for LED fixtures as per BIS shall besubmitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).a)150 Watt

Supplying and fixing of following size of XLPE insulated un-armoured Aluminium conductor cable in the existing surface/recessed steel/PVC conduit/ pole etc. as required. (a) 3 x 4 sq. mm

Supplying and laying of following size DWC HDPE pipe ISI marked alongwith all accessories like socket,bend,couplers etc conforming to IS 14930 Part II complete with fitting and cutting,jointing etc.direct in ground/RCC (75 cm below ground level in kaccha portion/350 mm below in pucca portion as per site requirement including excavation and refilling the trench but excluding sand cushioning and protective covering etc ,complete as required.a).90mm dia(OD-90mm & ID-76mm nominal)

Laying of one number PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade of following size in existing RCC/HUME/METAL pipe as required i) up to 35 sq.mm

Supplying and fixing PVC UV resistant hard Plastic fibre sheet for fixng the open pole box cover by using nut bolts/Kabja and other accessories as complete as required .

Supplying, installation, testing and commissioning LED street light fitting (IP-66 protection) of following rating complete with pressure die cast aluminium housing with all accessories including making connection & complete as per technical specification attached.a ) LED Post top fixture 60 Watt

Providing a motorised man lift crane suitable upto 12 mtr pole for replacement and rectification of street light fitting mounte on 12 mtr pole complete as required and pin pointing the locating LT fault in under ground cable with the help of fault locating machine .