Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹64,125Accepted-Finance JAMMU | JAMMU | JAMMU AND KASHMIR | 180001 | ₹64,125 | L1 | Accepted-Finance lowest |
| 2 | L2₹64,985+₹860 (1.34%)Rejected-Finance BHAGWATI NAGAR JAMMU | ₹64,985+₹860 (1.34%) | L2 | Rejected-Finance not lowest |
| 3 | L3₹75,000+₹10,875 (17.0%)Rejected-Finance HOUSING COLONY UDHAMPUR | UDHAMPUR | JAMMU AND KASHMIR | 182101 | ₹75,000+₹10,875 (17.0%) | L3 | Rejected-Finance not lowest |
| Sl No | Description | Qty | Unit | Vaibhav Engineers and Technocrates L1 | PERFECT ELECTRICAL WORKS L2 | M.S J K HYDRAULIC ENGGG AND FABRICATOR WORKS L3 |
|---|---|---|---|---|---|---|
| 1.00Repair/replacement of worn out parts of 5 cusec x24mt head pumping unit no. 5 along with allied works at LIS Batera. | ||||||
| 1.01 | Decoupling of 5 Cusec x24 mt head Horizontal split casing pump of unit no.5 from the motor assembly from the base frame. Carriage of the dismantled 5 cusec split casing pump by using manual labour, head load to the nearest roadside, loading in transport vehicle and carriage to the workshop in the mechanical transport.
Repair to the 5 Cusec split casing pump set at workshop by way of dismantling for extraction of damaged internal parts. Providing, turning, rethreading & finishing to accurate size of new pump shaft as per specifications of old damaged shaft. Making of new slots for feather keys, space for bearings, bush/sleeves. Repair to impeller by way of remetalling, machining, turning and finishing to accurate size including making of new key way of the same specifications. Providing and fitting of new bush-02 Nos., new chuck nut, new gland rings, 2no.s new bearings as per sample, 2no.s new gland plates, new studs/bolts on it, applying sufficient amount of grease to avoid excessive wear and tear, providing gland packing as per requirement, re-assembling of and then back carriage to the LIS. Repair to coupling set by way of welding, machining of bore, resizing of coupling bolt holes by welding and drilling to proper size. Job also includes providing and fitting of new nuts/bolts & rubber bushes for coupling set. Complete job including cost of material, labour charges, fitting/reinstallation at the base frame, coupling and making proper alignment of the pump motor and testing on partial/full load at site. Repair to the old damaged 400Amp main Switch of LIS Batera. Job includes complete dismantling of old damaged cable and HRC fuses after disconnecting the power supply from LT side of the transformer and then providing and fitting of 2no.s new HRC fuses 400A capacity of any standard make. Also providing/fitting of new single core 400sq.mm aluminium cable approx.12m from main switch to voltage stabilizer at site by way of providing/fitting of 400Amp aluminium thimbles with the help of crimping tool at both ends. Complete Job includes cost of material, tools & tackles charges, hire charges of crimping tool, carriage charges and transportation charges | 1 | Job | 64,125 ₹64,125 Lowest | 64,985 ₹64,985 | 75,000 ₹75,000 |
| 1.02 | Rebate on Old Parts | 1 | Job | -1,300 ₹-1,300 | -1,300 ₹-1,300 | -1,500 ₹-1,500 |
Tender Value
₹93,500
EMD Value
₹1,870
Closing Date
25 May 2026, 2:00 pmClosed
XEN MID JAMMU
MID JAMMU
as per tender notice and sbd
2026_IFC_309719_1
MID/J/e-NIT/2026-27/06
Open Tender
Repair and Maintenance Works
Item Wise
10 days
batera
as per tender notice and sbd
8 documents required · 8 mandatory
₹200
Executive Engineer MID JAMMU
₹1,870
12 Jun 2026
11 May 2026
26 May 2026
11 May 2026
25 May 2026
11 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Repair/replacement of worn out parts of 5 cusec x24mt head pumping unit no. 5 along with allied works at LIS Batera. | |||||
| 1.01 | Decoupling of 5 Cusec x24 mt head Horizontal split casing pump of unit no.5 from the motor assembly from the base frame. Carriage of the dismantled 5 cusec split casing pump by using manual labour, head load to the nearest roadside, loading in transport vehicle and carriage to the workshop in the mechanical transport.
Repair to the 5 Cusec split casing pump set at workshop by way of dismantling for extraction of damaged internal parts. Providing, turning, rethreading & finishing to accurate size of new pump shaft as per specifications of old damaged shaft. Making of new slots for feather keys, space for bearings, bush/sleeves. Repair to impeller by way of remetalling, machining, turning and finishing to accurate size including making of new key way of the same specifications. Providing and fitting of new bush-02 Nos., new chuck nut, new gland rings, 2no.s new bearings as per sample, 2no.s new gland plates, new studs/bolts on it, applying sufficient amount of grease to avoid excessive wear and tear, providing gland packing as per requirement, re-assembling of and then back carriage to the LIS. Repair to coupling set by way of welding, machining of bore, resizing of coupling bolt holes by welding and drilling to proper size. Job also includes providing and fitting of new nuts/bolts & rubber bushes for coupling set. Complete job including cost of material, labour charges, fitting/reinstallation at the base frame, coupling and making proper alignment of the pump motor and testing on partial/full load at site. Repair to the old damaged 400Amp main Switch of LIS Batera. Job includes complete dismantling of old damaged cable and HRC fuses after disconnecting the power supply from LT side of the transformer and then providing and fitting of 2no.s new HRC fuses 400A capacity of any standard make. Also providing/fitting of new single core 400sq.mm aluminium cable approx.12m from main switch to voltage stabilizer at site by way of providing/fitting of 400Amp aluminium thimbles with the help of crimping tool at both ends. Complete Job includes cost of material, tools & tackles charges, hire charges of crimping tool, carriage charges and transportation charges | - | Job | - | - |
| 1.02 | Rebate on Old Parts | - | Job | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.45 MB
SBD06.pdf
Additional Documents • 0.49 MB
BOQ_1002440.xls
BOQ • 0.28 MB
corri06ext.pdf
PDF • 1.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .