PROVISION OF FLAG MAST AT H-1 PLOT, GRATING TO SAUCER DRAIN AND GLAZING AT FIRE SATTION AT ICGAS RATNAGIRI AND PROVISION OF TREE GUARD AT GE (I) (CG) RATNAGIRI

Amount

Supply & Fixing of Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, wheel section for sliding etc. all complete as per architectural drawings and colour, texture of the powder coatings as per the directions of Engineer-in-Charge.

Material & Labour for 12mm thick Toughened glass of black or any other colour, as in hinged doors, partitions, automatic doors, window and all other similar work fix in position of any description and any position at any hight including cutting to shape, drilling holes, fixing to the hinges, frames, door closer etc, including suitable fitting & fixture, aluminium bead or rubber seal material including the safety and security and heat resisting glass protection film to set in the opening complete all as specified and as directed

Supply & Fixing of the safety, security and heat resisting Solar control glass protection film 25-micron reflective type sticked to glass panes as per instructions of manufacturers 3 to set in the opening of the glass of any size, shape or any description and at any hight complete all as specified and as directed by Engineer-in-Charge.

Supply & Fix steel work of rolled section as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, or in any other work and place etc. complete all as specified and directed by Engineer-In-Charge.

Material & Labour preparation of new steel surfaces & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Excavating in post holes (or similar holes) each dimension 300x100x100mm, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for foundation etc, or for shafts, wells, cesspits, manholes, pier holes, toe walls, kerb stones, etc. not exceeding 10 sqm on plan and not exceeding 1.5 metre in depth and getting out in hard / dense soil complete all as specified and directed.

Removing excavated materials exceeding 250 Metre not exceeding 500 Metre and depositing where directed at a level not exceeding 1.5 metre above the starting point.

Material and labour for PCC 1:4:8 type D2 using 40 mm graded stone aggregate Cement concrete as in foundations, filling and mass-concrete complete all as specified and as directed.

Material and labour for machine cut laterite stone masonry wall exceeding 10cm in width of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in CM 1:4 complete all as specified and as directed.

Material & Labour for rendering 15mm thick in CM 1:4 on fair faces of stone masonry work or concrete surfaces and finished even smooth without using extra cement complete all as specified and directed.

Material & Labour preparation of newly plastered wall surfaces & applying three coats of white wash on wall complete all as specified and directed.

Material & Labour for Rolled mild steel of Fe 410-W (Grade E- 250) quality "A" as in framed work of doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed

Material & Labour for for Mild steel Fe 410 Grade E-250 quality A in flat, round or square bars, in available length for wind ties, cages, etc including drilling holes, welding and securing to frames complete all as specified and as directed.

Supply & Fix for Mild steel screw bolts (machine made) having dia of neck 05-10mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5cm long complete all as specified and as directed

Supply & Fixing of Expanded metal of weight not exceeding 4 Kg per square metre, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members made up into mattresses or cages, lapped, wired and laid in position, including securing to steel post etc. complete all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed.

Use and waste of formwork to sides and soffit of chajjas etc flat for rough finished surfaces of concrete complete all as specified as directed

Material & Labour for RCC 1:1.5:3 (M-20) type B1 (using 20mm graded stone aggregate) as in chajjas etc, complete all as specified and directed.

Material & Labour for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified

Material & Labour for rendering 10mm thick on Laterite stone masonry surfaces or surface other than fair face of Laterite stone or on one side of lathing with Cement Mortar in 1:6 finished even and smooth without using extra cement all as specified and directed

Material & Labour for PCC 1:2:4 (Using 20mm graded stone aggregate), as in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed

Material & Labour for rendering 15 mm thick with cement mortar (1:4) for laying in dado/ wall cladding etc complete all as specified.

Material & Labour for 18 to 20mm thick Granite (of any type) tiles machine cut as in wall cladding laid over cement screed and jointed with grey cement slurry including mixing of Araldite adhesive or equivalent for proper bonding of stone slabs on walls, pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, colour and shades of granite as approved by Engineer in charge complete all as specified.

Material & Labour for rounding to edges of granite and marble stone slabs one edge, such as in copings, steps, cooking platform, and other similar situations complete all as specified and directed.

Supply & Fix Steel work in tubular trusses including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to IS:1161- 1979 grade St -240 including one shop coat of zinc chromate primer paint (including preparation of surface) at contractor’s workshop before fabrication complete all as specified and as directed.

Removing excavated materials not exceeding 250 Metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.

m/s Pravin s Bhosale (BID ID -3262820)