Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.7 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹36.0 L+₹3,513.10 (0.10%)Rejected-AOC | L2 | Rejected-AOC Rejected | |
| 3 | L3₹40.4 L+₹4.4 L (12.3%)Rejected-AOC 451 NEAR RADHA KRISHAN MANDIR VPO MAMUN PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L3 | Rejected-AOC Rejected | |
| 4 | L4₹40.9 L+₹4.9 L (13.7%)Rejected-AOC | L4 | Rejected-AOC Rejected |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
4 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer(N)Mamun
Garrison Engineer(N)Mamun PIN-145001
COMPREHENSIVE MAINTENANCE TO CERTAIN BLDGS OF MD OFFRS ACCN AT DHAULADHAR ENCLAVE AND PERIODICAL SERVICES TO OTM/ MD ACCN OF D-III ZONE UNDER AGE B/R-I OF GE (N) MAMUN
2023_MES_602072_1
GE(N)/M-18/2023-24
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer(N)Mamun
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer(N)Mamun
₹80,000
11 Aug 2023
8 Jun 2023
6 Jul 2023
8 Jun 2023
4 Jul 2023
22 Jun 2023
Amount
M&L for rendering or plastering work 10mm thick in CM 1:3 as in fascia / edging / ceiling of Chajjas, roof projections etc, including taking out peeled off plaster / concrete if required and making the line in true shape and finishing the surface without using extra cement complete all as specified and directed.
M&L for prepartion of new plastered surface of external wall and chajjas and making the surface smooth with sand paper and priming the surface, applying two coat of exterior emulsion(weather coat) paint over primer complete all as specified and as directed.
M&L for 15mm thick plaster in two layers (10+5mm) in cemet mortar 1:4 external layer of plaster shall be mixed with liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc, surface finished even and smooth with using extra cement including taking down of existing plaster of any description and removal of rubbish complete all as specified and as directed. Note: WPC shall be measured and paid separately.
Supply only liquid water proofing compound complete all as specified and directed.
M&L for preparing new plastered surface of wall and appying two coats of cement base paint mixed with silicon based water repellent compound over a coat of primer by roller/brush complete all as specified & as directed. Note:- Rate of silicon based water repellant compound are included in the quated rate.
M&L for Complete removal of existing treatment from walls, brooming down with broom or steel wire brush; scrapping down smoke soot, moulds, mass, efflorescent salts, trading oil and greasy spots etc including minor repair to make good surface in CM 1:4 or with Water Proofing Putty to obtain smooth surface and applying two coats of cement base paint (including curing) over a coat of primer complete all as specified and as directed.
M&L Preparation of old plastered/unplastered surfaces of wall by scraping down smoke soot, mould moss and effloroscent salts making even and smooth, whitening complete and applying one coat of cement base paint (including curing) mixed with silicon based water repellant compound complete all as specified and as directed. Note:- Rate of silicon based water repellant compound are included in the quated rate.
M&L for preparaton of old plastered/ unplastered surfaces by scraping down smoke soot, mould moss and effloroscent salts, making even and smooth, complete and applying one coat of exterior emulsion acrylic antifungal paint on old decorated surfaces of complete all as specified and as directed.
M&L for Writing letter or figures (Block, Roman, Italic or Indian) n exc 30 cm high complete. The colour of paint and dimension of letter shall be applied as approved by Engr-In-Charge. Note : The cost for steel tubular double scaffolding necessary for execution of work and protective measures for height more than height of double/triple storey building as directed by Engr-in-charge shall be included in the quoted rate against the respective item and nothing shall be admisible on this account.
M&L for Writing Stops, commas, short lines, dashes, huphesn, brackets etc and the colour of paint and dimension of characters shall be used as approved by Engr-in-Charge. Note : The cost for steel tubular double scaffolding necessary for execution of work and protective measures for height more than height of double/triple storey building as directed by Engr-in-charge shall be included in the quoted rate against the respective item and nothing shall be admisible on this account.
M&L for Rendering 10mm thick on fair faces of brick work, concrete sruface in cement mortar (1:6), finished even and smooth without using extra cement including taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises complete all as specified and directed.
M&L for rendering 5mm thick in CM 1:3 on concrete surface of ceiling, chajja etc, finishing the surfaces even and smooth without using extra cement including taking down of existing plaster of any description and removal of rubbish complete all as specified and as directed.
Complete removal of existing treatment to walls/ceiling/concrete surface of any type/description viz. distemper, emulsion etc using mechanical means/grinder and cleaning the surface to receive finish complete all as specified and directed.
M&L for Preparation of new plastered surfaces of walls, applying wall care putty to desired even and smooth and levelled surfaces (any thickness) and applying two coats of oil bound distemper on walls over a coat of primer complete all as specified and directed.
M&L for preparation of new plastered surface of walls and applying three coats of white wash complete all as specified and directed.
M&L for preparation of newly plastered surface of ceiling and applying two coats of white wash complete all as specified and directed.
M&L Preparation of old plastered/unplastered surfaces of walls by scraping down smoke soot, mould mass and effloroscent salts, tading oil & greasy spots, filling of cracks and small holes with POP, making even and smooth with whitening and applying two coats of white wash complete all as specified and as directed.
M&L Preparation of old plastered/unplastered surfaces by scraping down smoke soot, mould moss and effloroscent salts, tading oil & greasy spots including filling of cracks and small holes with and applying one coat of white wash on old decorated surfaces of ceiling complete all as specified and as directed.
M&L Preparation of old plastered/unplastered surfaces of walls by making plastered surface smooth using wall care putty to disturbed surfaces (where required) and applying one coat of oil bound distemper complete all as specified and directed.
M & L for preparing old painted steel and iron surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M & L for preparing old painted steel and iron surfaces of any description, not exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M & L for preparing old painted wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M & L for preparing old painted wood & wood based surfaces of any description, not exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each including refixing in same opening after easing and adjusting complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each and removal complete all as specified and directed.
S&F pressed steel frames for doors/windows of size size 125x60 mm (1.25mm thick MS sheet) with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats, painted with a shop coat of red oxide primer complete all as specified and directed.
S&F pressed steel frames for doors/windows of size size 105x60 mm (1.25mm thick MS sheet) with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats, painted with a shop coat of red oxide primer complete all as specified and directed.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45x70 mm (single rebate) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/ moisture proof and fire retardant, fixed in position with and including MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: (i) For WPC solid door/window frames minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. (ii) Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed.
S&F 35mm thick factory made plain framed panelled shutters of 2nd class hard wood, two panels with lock rail and panel of 9mm thick BWP commercial ply. The size of rail and stile as per IS-1003 (Part-I), Kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F 35mm thick factory made 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge. Size of stiles rails and other parts as per clause 8.24 (a) of SSR Part-I complete all as specified & directed.
M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
S&F Solid PVC door frame of size 50 x 47 mm made out of 5mm plain colour PVC sheet & edges shall be painted to match with printed sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.
M&L Soild PVC door frame of size 50mm x 95mm (suitable for moulded door) made out of 5mm wood grain colour PVC sheets & edges will be painted to match printed sheet as reinforced with 19 mm square MS tube and fixing in opening as specifiecation & drawing complete all as specified and as directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet s for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with 5mm thick & 15 mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree), and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.
All as per item 36 wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading complete all as specified and directed.
S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.
S&F for 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed
S&F aluminium anodized barrel tower bolts 200 mm of extruded section (as per sample) fixed complete all as specified and directed.
S&F 150 mm size aluminium alloy handles, febricated type extruded section (as per sample), complete all as specified and directed.
S&F 100 mm long hasp and staple , mild steel , wire type/ plate type stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F Box type Steel windows comprised of tubular frame and shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire mesh and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150mm long for each leaf and 8mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks (1:2:4 type 12.50mm graded crushed stone aggregate) including two coats of synthetic enamel paint over a shop coat of red oxide primer etc. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3 complete all as specified and directed.
S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, or galvanized wire staples complete all as specified & directed.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, or galvanized wire staples, fixed in repair complete all as specified & directed.
Hacking out old broken glass ( any thickness , size, quality, or description) from wooden / steel frame glazed with putty or fixed with beads, rubbish off the premises complete all as specified and directed.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares not exc 0.50 Sqm in each pane complete all as specified and directed.
S&F 3mm thick frosted/pin head glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares not exc 0.50 Sqm in each pane complete all as specified and directed.
S&F in repair 20mm bore stainless steel, single curtain rod (walls thickness not less than 1mm) including fancy type both sides brackets, finials etc (as per sample) suitable for single curtain rod complete all as specified and directed.
M&L for glazed ceramic coloured tiles in vertical surface 450x300x7mm set and jointed (joint free) in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed of mortar in CM 1:4 including dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing), rubish off the premises complete all as specified and directed.
M&L for screed bed or bedding layers of mortar 15 mm thick in CM 1:4 for laying floor finishes, rough finished surface complete all as specified and directed.
M&L for double charged vitrified tiles light shade 9-10 mm thick ( Square or rectangular) polished, area of each tile exceeding 0.36 sqm as in verticle surface /daddo/skirting and like, set and jointed (joint free) in neat cement slurry and pointed in coloured cement including dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing), rubish off the premises complete all as specified and directed.
M&L for vitrified tiles double charged light shade 9-10 mm thick ( Square or rectangular) polished, area of each tile exceeding 0.36 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement including dismantling floor, hearth or walls tilling of any description including cement mortar bedding ( but not backing), rubish off the premises complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement including dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing), rubish off the premises complete all as specified and directed.
M&L for 18 - 20mm thick single piece granite stone work (Telephone Black/ Lakha Red) thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and providing suitable hole for gas pipe line and polishing complete in steps, jambs, pillars, window and cills,cooking platform over and including 15 mm thick screed bed or bedding layer of mortar in CM 1:4, pointing in white cement using marble dust (1:2) with admixture of pigment to match with shade of granite and including dismantling of existing tile or stone slab with bedding layer of mortar of any description and removal of rubbish complete all as specified and as directed.
M&L for green marble work 15-16 mm thick (table rubbed and polished) in cooking plateform, window cill, steps, stair case trade & riser etc in cement mortar (1:4), pointed in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of including demolition of old stones/tiles and rubbish off the premises complete all as specified and directed.
M&L for Round chamfering to the edges of marble/granite slabs complete all as specified and directed.
Taking up or down steel water tubing and connections including cleaning for refixing of pipe 15mm bore complete all as specified and directed.
Taking up or down steel water tubing and connections including cleaning for refixing of pipe 20mm bore complete all as specified and directed.
S&F 15mm bore mild steel tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed to walls, floor, ceiling etc complete all as specified and directed.
Refixing of old steel tubing 15 mm medium grade galvanized ISI marked with new all fittings short pieces and fixed complete to walls, floor etc all as specified
M&L for cutting chases, pinning in brick work, making good to facing where required, pointing in CM 1:3, cutting n.exc. 10cm in girth complete all as specified and directed.
S&F 20mm bore mild steel tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed to walls, floor, ceiling etc complete all as specified and directed.
Refixing of old steel tubing 20 mm medium grade galvanized ISI marked with new all fittings short pieces and fixed complete to walls, floor etc all as specified
S&F in repair 15mm bore dia angle valve / stop valve capstan head cast copper alloy chromium plated fancy type (as per sample) ISI marked with crutch or butter fly handles screwed down, screwed for iron pipe complete all as specified and directed.
S&F in repair 15mm bore dia concealed type angle valve / stop valve (as per sample) capstan head cast copper alloy chromium plated fancy type with long shank and cup ISI marked with crutch or butter fly handles screwed down,screwed for iron pipe of 15mm bore complete all as specified and directed.
S&F in repair 15mm bore dia Bib taps, capstan head cast copper alloy, chromium plated fancy type ISI marked (as per sample) with crutch or butter fly handles, screwed down, screwed for iron pipe complete all as specified and directed.
S&F in repair 15mm bore dia Bib taps long body, cast copper alloy, chromium plated fancy type ISI marked (as per sample) with crutch or butter fly handles, screwed down, screwed for iron pipe complete all as specified and directed.
S&F in repairs Vitreous china wash basin, white flat back, size 550 x 400 mm (as per sample), brackets, CP waste coupling and cutting for and pinning in ends of brackets or errecting stand including 32 mm dia waste pipe complete all as specified and directed.
S&F in repair kitchen sinks with drainage board made of stainless steel 1mm thick with plugs, washers , PVC waste pipe having 32mm dia and single piece length upto grating fixed in repair including waste copling; bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915x460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F in repair CP health foucet hand shower of min wt of 280 gms (as per sample) including 8mm dia 1m long flexible hook and wall hook complete all as specified and directed.
S&F 20mm bore dia ball valve (minimum weight- 210 gms), high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball etc complete, fixed in repair all as specified & directed.
S&F in repair PVC waste pipe 32 mm dia for wash hand basin and urinal length not less than 1.5M (as per sample) complete all as specified and directed.
Dismantling of water tank RCC/HDPE/Ferrocrete etc of size 500 Ltrs to 1000 Ltrs capacity, removal from site and disposal beyond MOD land complete all as specified and directed.
M&L for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) two layers, Capacity 1000 litres, ISI Marked including all accessories, hoisted and fixed in position all as specified in SSR Part-I including dismantling of old tank complete all as specified and directed.
M&L for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) two layers, Capacity 500 litres, ISI Marked including all accessories, hoisted and fixed in position all as specified in SSR Part-I including dismantling of old tank complete all as specified and directed.
S&F in repair 20mm bore dia gun metal globe or gate valves (as per sample) with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed
S&F in repair over head shower rose 125mm size (square/circular as per sample) for 15mm bore pipe, cast copper alloy chromium plated complete all as specified & directed.
S&F in repair PVC low level flushing cistern 10 ltr capacity, inlet and outlet connections, brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and directed.
S&F in repair PVC connection 15 mm dia & length 450 mm with PTMT nuts complete all as specified and directed.
S&F in repair factory made 17-18mm thick WPC (wood polymer composit) sheet one side prelam sheet and other side wood nature colour for cupboard shutter of density 600 kg/cm3 with 100% termite/water proof, fire rertradent, Eco friendly and finish at all edges at level for making edges lipping using binding tape etc as in Kitchen cupboard, Cabinet etc complete all as specified /Manufacturer's specification and directed
S&F in repair factory made 17-18mm thick WPC (wood polymer composit) sheet both side plain board for cupboard shutter of density 600 kg/cm3 with 100% termite/water proof, fire rertradent, Eco friendly and finish at all edges at level for making edges lipping using binding tape etc as in Kitchen cupboard, Cabinet etc complete all as specified /Manufacturer's specification and directed.
S&F factory made 5mm thick WPC board one side prelam sheet for kitchen cabinet/cupboard of density 600 kg /Cum, 90° bent complete all as specified and directed.
S&F 150 mm size stainless steel brignt finish handle (as per sample), fixed with nut and bolt /screws complete all as specified and directed.
S&F Telescopic type Side channel of drawer of standard size including roller for moving drawer made out of mild steel bright finish or electro galvanised ( soft close ball bearing runners) with width of flap 30mm & 60mm long complete all as specified and directed.
S&F stainless steel (304 grade) plain basket of size 17''x20''x4'' (as per sample), complete all as specified and directed.
S&F Stainless steel (304 grade) partition of size 17''x20''x6'' (as per sample), complete all as specified and directed.
S&F Stainless steel (304 grade) cutlery (platr type) of size 17''x20''x4'' (as per sample), complete all as specified and directed.
S&F Stainless steel (304 grade) cup & soucer of size 17''x20''x4'' (as per sample), complete all as specified and directed.
S&F Stainless steel (304 grade) plate basket of size 17''x20''x6'' (as per sample), complete all as specified and directed.
S&F Stainless steel (304 grade) auto, zero crank hinges, fency type (as per sample), with concealed pattern fitted to shutters complete all as specified and directed.
S& F Magnetic catcher (as per sample) fixed with Nut and bolt complete all as specified and directed.
Disconnecting water tank (from Roof Slab/staging of single/double/Triple story bldg), float valve with float arm, outlet pipe from PVC service water tank, emptying stored water through wash outlet, cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes finally washing the internal surfaces with bleaching powder, closing wash outlet, re-fixing water tank, float valve and out let in proper position, replacemt of old PVC top cover with proper hinge type cover as per sample including minor repairs if required and testing of capacity 500 litres to 1000 liters complete all as specified and directed.
S&F in repair towel rail, brass, CP 600 mm long 20mm dia pipe of 1mm wall thickness complete all as specified and directed.
S&F in repair PVC Lid for water tank of Capacity 500 Ltr to 1000 Ltr complete all as specified and directed.
S&F for 110mm bore PVC(SWR) rainwater pipes including taking down eaves gutters and rainwater pipes (any size or pattern), with all fittings, head, shoes, bend, swan-nacks etc., including cleaning or refixing and removal complete all as specified & directed.
Supply and fix 110mm bore PVC (SWR) bend, complete all as specified and directed.
S&F in repair for stack clamps made out with flat Iron of size 25x4mm thick, including bolt & nuts and securing ends to wall for 100/110mm bore pipes complete all as specified and directed.
M & L Plain cement concrete 1:5:10 type E2 using 40mm graded crushed stone aggregate as in sunken floors portion including demolition of PCC & removal of rubbish complete all as specified and directed.
M&L 10 mm thick cement plaster in cement mortar 1:3 on brick or concrete surface of sunken floor finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified & directed (WPC shall be measured and paid separately)
M&L for bitumen blown of any grade, applied hot, two coats to concrete/plastered surfaces at the rate of 1.5 Kg per sq m per coat and applying polythene film black, 50 micron complete for sunken floor slab and embedded in side wall / covered fillet complete all as specified and directed.
M&L for repair to old steel window not exc 1 sqm including replacement of unserviceable/ damaged hinges, all handles, necessary welding to shutters and chowkhat for making window in serviceable condition, all members grinding to smooth surface and applying redoxide primer to grinded surface complete all as specified and directed.
S&F in repair MS helical door spring 150mm size fixed/welded to steel frame complete all as specified and directed.
S&F in repair 15mm bore pillar tap cast copper alloy, fancy type, long neck, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe, ISI marked complete all as specified & directed.
S&F in repair CP brass central hole single lever WHB Mixture 15 mm bore for mixing hot and cold water, screwed down, high pressure screwed for iron pipe complete all as specified and directed.
S&F in repairs wall mixer (as per sample) for 15mm bore dia, cast copper alloy chromium plated fixed of complete all as specified and directed.
S&F in repair 3-in-1 wall mixture with over head and telephonic shower capstan head (as per sample) for 15 mm bore pipe, cast copper alloy chromium plated complete all as specified and directed.
S&F in repairs Sink mixer for 15mm pipe, cast copper alloy chromium plated (as per sample) fixed in repairs of complete all as specified and directed..
S&F in repair Vitreous china ceramic under counter wash basin glossy finish of white color for bathroom size 550x400x200mm including waste pipe, brackets and cutting for and pinning in ends of brackets or errecting stand including 32 mm dia PVC waste pipe having 32mm dia and single piece length up to grating, waste copling full thread complete all as specified and directed.
S&F in repair glass shelf assembly consisting of 5.5mm thick sheet glass of size(18cmx5.5cm)wide (as per sample) with chromium plated brackets double guard and railing 60cm long, complete all as specified and directed.
S&F in repair corner glass shelf assembly (as per sample) consisting of 5.5mm thick sheet glass dia not less than 225cm with chromium plated brackets double guard and railing complete all as specified and directed.
S&F in repairs CP soap niche fixed to walls with chromium plated brass screws complete all as specified and directed.
S&F in repair stainless steel kitchen plate rack of size 750 x 900 mm not less than 1mm thick sheet thickness of approved make fixed with mild steel screw complete all as specified and directed.
S&F Cast iron floor trap 75mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating complete all as specified and directed.
S&F in repair Vitreous china wash down water closet pan pedestal pattern, white (excluding supply of flushing cistern and flush pipes, but including fixing thereof), including making connections to trap, and to flush pipe including plastic seat and cover with stainless steel or aluminised hinging device and fixed complete all as specified and directed.
S&F in repair one piece Vitreous china wash down water closet pan pedestal pattern with flusing cistern, (size 69x36x74cm) white including making connections to trap, and to flush pipe including plastic seat and cover (as per sample ) with Stainless steel or aluminised hinging device and fixed complete all as specified and directed. Make : Hindware cat part No. 92082 or equivalent to Somany & Cera
S&F in repair vitreous china, squatting Pan 'Orissa' pattern 'white' size 580mm x 440mm white with integral footrest including provision of lean concrete bedding, connection to drain out pipe, flush pipe, flush pipe and anti syphonage pipe etc, making good to floor where required complete all as specified & directed.
S&F in repair toilet paper holder with flash recessed type of stainless steel complete all as specified and directed.
S&F plastic water closet seat, closed pattern with flat bottom and cover & cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
Dismantling of brick tile or terracing tiles with bedding layer of mortar etc and removal of rubbish beyond MOD land complete all as specified & directed.
M&L for PCC Tiles (300mm x 300mm x 22-25mm ) laid on and including 20 mm thick cement sand mortar in the ratio of 1:4, set, grouted flush and jointed in neat cement slurry complete all as specified & directed.
M&L PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate ) padding as levelling course/padding using water proofing compound laid over existing roof, suface finished rough to recieve cement mortar including necessary formwork including demolition of existing concrete of any description and removal of debris out off the premises complete all as specified and as directed. Note :- (WPC shall be measured and paid seperately).
M&L for PCC 1:2:4 Type B1 (using 20 mm graded crushed stone aggregate) as in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, benching, copings, kneelers, apex stones, bed plates, kerbs , fillet, gola, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including demolition of existing concrete of any description and removal of debris out off the premises complete all as specified and directed
M&L 20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth mixed with liquid water proofing compound as per manufacturer instruction including raking out joingts, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for APP modified roof treatment over existing accessible RCC roof slab / chajjah / canopy / parapet walls to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP having a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm using butane torch by torch application with 10cm side laps and 15cm end overlap of membrane.
Deduct : Total amount of SCH 'A' SECTION-II (SCH OF CREDIT) Rs. 22,065.50 to be deducted from Schedule ‘A’ (BOQ) to arrive at the Contract Sum.
dinesh enterprises
RD Engineers
M/S BHOTO AND CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .