Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹16.4 L
EMD Value
₹32,760
Closing Date
28 Sept 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Accessories Division, Lucknow
HINDUSTAN AERONAUTICS LIMITED Accessories Division, Lucknow Post Office, Lucknow - 226 016 Uttar Pradesh, India
Renovation of Technical office, HR office at Accessories Complex office at HAL Lucknow
9819
NO.HAL-AD/9904/4653/CE/2024/
Works
Accessories Complex - Lucknow Divn - Works - Civil
₹0
₹32,760
28 Sept 2024
14 Sept 2024
14 Sept 2024
28 Sept 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership Pvt. Ltd./ Proprietorship/Partnership/ Public limited/ Govt. Agencies/ Trust
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
Contact details
Intending parties having credentials as mentioned below may participate in e-tendering. The pre-qualification requirements for the works are as under :-
List of similar works executed in the past 7 years with value, schedule period of completion reasons for delay in completion if any and salient features of works, with documentary evidence of satisfactory completion.
PAN No.:
Constitution and legal status i.e. Proof of proprietary/Partnership firm or company & authorised person for receiving or signing the documents to be submitted.
Goods and Service Tax ID No.
SAC (Service Accounting code) along with the tax structure.
Bank account details such as account no., name of account holder, name and address of the bank, IFSC code duly certified by the bank along with cancelled cheque as a document of proof shall be attached.
Registered Contractor
Average annual financial turnover during the last 3 years should be at least 30% of the approx. estimated amount put to tender. Copy of balance sheet/ Auditor’s statement or other relevant document to be attached Profit & Loss statement duly certified by chartered accountant with UDIN shall be considered for evaluation of turnover for the respective Financial Year.
EMD of Rs.32760.00
Latest Solvency Certificate issued from Nationalized/ scheduled Bank issued and NOT before 12 months from the last date of Tender submission
Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded]
(i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost.
(ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost.
(iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
Details of person holding the power of Attorney (If different from contact person)
DECLARATION I
DECLARATION II
DECLARATION III
Description of Items
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling / wall cladding etc including disposal of unserviceable material and stacking of serviceable material within factory premises as directed by Engineer-in-charge.
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
Dismantling doors, windows and clerestory windows (steel or wood) shutter of area 3 sq. metres and below including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead or as per direction of EIC in factory premises etc all complete as required and directed by EIC.
Dismantling doors, windows and clerestory windows (steel or wood) shutter of area beyond 3 sq. metres and above including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead or as per direction of EIC in factory premises etc all complete as required and directed by EIC.
Providing and laying Double charge vitrified tile polished finish of Size of Tile 600 x 1200mm, thickness as per manufacturer, Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily, laid in floor/ wall/ skirting, cutting wastage, etc all complete as required and dircted by EIC.
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level or With 16 mm thick beveled tegular mineral fibre Anti-microbial false ceiling tile confirming to ISO 5 (class 100 ) specifications or Armstrong KCS Mineral Fibre Acoustical Suspended Ceiling System with Dune Max Tegular 15 BE Edge Tiles of 16 to 20mm thickness and KCS Silhouette 15mm face exposed grid, at all heights of size 595X595mm of approved texture, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge.
Repairs to plaster With cement mortar 1:4 (1cement: 4 coarse sand) of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.
Providing, rendering, dubbing out cement plastering 12 mm thick with cement mortar 1:6 (1 cement: 6 coarse sand) on walls of rough / fair faces of brick wall / concerete surface including jams, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement with all labour, material, scaffolding, curing, including hacking of concrete surfaces, T&P etc all complete as per direction of EIC.
Preparation of surface with applying average 1mm thick approximately birla putty before applying painting on wall including sand papering for smoothing of surface to achive even surface with all labour material T&P etc.all complete as per specification and direction of E.I.C.
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, on New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : including surface preparation, making surface smooth and even and labour, material, scaffolding, T&P etc all complete as per direction of E.I.C.
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).
Providing and fixing Two track two panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body, Using R3 series with frame (55mm & above) x (40mm & above) & sash (30mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system (Height upto 1.8m or as per site requirement), factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Note: Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately.
Providing and fixing 12mm thick commercial ply conforming to IS : 1328 BWR type plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately).
Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead Thickness above 10 mm up to 25 mm etc all complete as required and directed by EIC.
Providing and fixing plywood 4 mm thick one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with ,Decorative veneer facings of approved manufacture including cutting, wastge, fixing etc complete all as required and directed by EIC.
Providing & Fixing 1.0 mm thick decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality etc all complete as required and directed by EIC.
Providing and fixing 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws, ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters etc al complete as required and directed by EIC.
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. Complete as required and directed by EIC.
Providing and fixing bright finished brass handles with screws of approved quality etc. Complete as required and directed by EIC.
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete as required and directed by EIC.
Providing and fixing Double strip (horizontal type) magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. Complete as required and directed by EIC.
Providing and fixing M.S. Piano hinges, Overall width 35 mm, ISI marked IS : 3818 finished with nickel chromium plating grade 1 as per IS: 1068 and fixing with necessary screws etc., completeas required and directed by EIC.
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness completea s required and directed by EIC.
Supplying and fixing 2nd class teak wood fillets new wooden fillets wherever necessary consumables ect all com plete as required and directed by EIC.
Providing and fixing sal wood work or same class other approved wood in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) etc all complete as required and directed by EIC.
Providing and fixing skirting with 18 mm thick Pre-laminated (one side decorative and other side balancing lamination) flat pressed 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete as required and directed by EIC.
Providing and fixing bright finished brass tower bolts (barrel type) of approved make with necessary screws etc. complete as required and directed by EIC.
Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.
Dismantling tile work in floors/ walls and roofs laid in cement mortar for thickness of tiles 10 mm to 25 mm including stacking material within 50 metres lead including all lead and lifts etc as required and directed by EIC.
Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc With granite stone of area less than 0.50 sqm. or as per site requirment complete as per direction of Engineer-in-Charge.
Taking down carefully glass from aluminium window fixed / sliding, removal of damaged EPDM rubber gasket, cleaning the and refixing in window with new EPDM rubber gasket and glazing clip etc.complete including cost of all labour, material, wastage , scoffolding, refixing of alarm system etc. and as per direction by EIC.
Providing and laying 02mm thick heavy duty homoeneous , heavy duty, industrial use ans fiexible Non directional, muiti-colour polymer chips, PUR surface protection , homogeneous flooring rolls in width of 2mtr and continuous length of 20mtrs laid in floors/ skirtings,surface elect rical resistance of 100 Ohms to 1000 Ohms and in approved design and shade, as per the design of approved make such as adventus series of wonder floor/ Armstrong/ Responsive SPICS RQ brand or as approved by EIC make conforming to IS Standards in roll form with suitable adhesive and joints thermo welded to form seam less surface, including removing of existing PVC/ESD/ or any other description flooring and deposited the same as directed lace, cleaning of surface and preparation of surface to receive the floor, filing of minor pits / holes if any with Birlaputty/cement mortar etc. including cost of all material , labour,cutting wastages, T&P etc, complete all as required and directed by EIC.
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved as required and directed by EIC.
Providing and fixing glazing With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket/ aluminium glazing clips etc. complete as per the architectural drawings and the directions of engineer-in-charge .
Providing and Fixing 15 mm thick false ceiling board of size 595 x 595 mm or 6000x600 mm as per existing falseceiling grid of classic lite RH-99/ Dune max made armstrong or equivalent texure & type of calcium silicate trangular/square edge as per site requirement & approved by EIC complete including cost of all labour, material, wastage , scoffolding, refixing of alarm system etc and as per direction by EIC
Providing and fixing Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading in aluminium / MS windows with reqruied aluminium / MS fixing clips etc all complete as required and directed by EIC.
Fixing of old glass in windows glass panes (fixed/sliding) after taking down and re-fixing of old glass panes with EPDM rubber gasket/ neoprene gasket/ aluminium snap beading/ using old serviceable aluminium snap beading wherever required /wooden fileet etc as per site requirement etc complete as per direction of Engineer in charge.
Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.
Above
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
NIT.pdf
TENDER_DOCUMENT • 0.03 MB
PQ.xlsx
TENDER_DOCUMENT • 0.01 MB
BOQ.xlsm
TENDER_DOCUMENT • 0.03 MB
TECHNICALBID.pdf
TENDER_DOCUMENT • 0.73 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .