REPAIR/ MAINT OF MANHOLES, DRAIN, GARBAGE BINS, SEWAGE LINE INCL CLEANING OF SEAWGE LINE AND CERTAIN MISC B/R WORKS OF ZONE A AND D AT OLD CANTT UNDER GE (EAST) PRAYAGRAJ.

Amount

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position complete all as specified and directed.

M&L for precast RCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in cover slabs and the like including providing necessary form work etc, set in cement mortar (1:4) complete all as specified and directed. (Note : Reinforcement to be measured and paid separately).

M&L for mild steel TMT bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches, pillars etc including rubbish off the premises complete all as specified and directed.

M&L for brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 complete all as specified and directed.

M&L for brick work with sub class ‘B’ old size bricks (Except brick), straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 complete all as specified and directed.

Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces on wall, finished even and smooth without using extra cement complete all as specified and directed

M&L 15 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces on wall, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of External weather Proof Paint complete all as specified and directed

M&L for Complete removal of existing treatment on old decorated plastered surfaces of wall including cornices,pilastered etc. by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying two coat of cement base paint (approved colour/ shade) on wall surface complete all as specified and directed.

M&L for Complete removal of existing treatment on old decorated plastered surfaces of wall including cornices,pilastered etc. by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying two coat of exterior acrylic weather proof paint (approved colour/ shade) complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block having hard rubber finish top with polymer admixtures in any pattern or design any shape and size confirmeing to IS-15658-2006 of 80 mm thcik, M-40 grade with sed jointed & pointed grey cement and no pigment laid over including 25 mm thick sand cushioning, complete all as specified and directed.

M&L for Chequered cement concrete tiles having hard rubber finish top with polymer admixtures in any pattern or design of min size 30cm x 30 cm x 25 mm thick, set jointed and pointed in neat cement slurry in floors laid over including 15 mm thick screed bed in CM mortar 1: 4 complete all as specified and directed.

M&L for PCC1:3;6 type C-1 using 20 graded aggregate as in surface channels and drains complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in coping bed block etc including weathering slightly, rounded or chamfered angles and throating as directed and including necessary form work complete all as specified and directed.

M&L for PCC 1:4:8 , type D-2, using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

M&L for 75 mm thick cement concrete type-D-2, 1:4:8 using 40mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for 40 mm thick cement concrete type B1 1:2:4 as in floor finish surface even and smooth without using extra cement complete all as specified and directed.

S&F in repair vitreous china squatting pan, ‘Orissa’ pattern, of size 580 mm x 440 mm white with integral foot rest complete including provn of cement concrete bedding and connection to trap, outgoing flushing pipe, anti syphonage pipe,CI trap 100 mm Bore of pipe etc complete all as specified and directed.

S&F in repairs vitreous china wash down water closet (pedestal pattern), white (including fixing bolts, but excluding flushing cistern and flush pipe), fixing seat cover including connection to drain (or outgoing pipe, and to flushing pipe & antisyphonage pipe etc device complete all as specified and directed. Note : Plastic seat cover shall be measured separately as Supply only as considered under respective items.

S&F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet float valve including bracket with 32mm dia PVC pipe 600 mm long complete all as specified and directed.

Supply only plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repair Health faucet of superior quality ABS body with 15 mm dia 1.25 m long flexible tube and wall hook complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing rubbish off the premises complete all as specified and directed.

M&L for non skid joint free ceramic coloured tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 Sqm and not exceeding 0.18 Sqm each in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles, laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

S&F in repair of exterior digital Elevation tiles of size 300mm X 450mmx 7 to 8 mm thick on walls etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles fixed out & including 10mm thick plants in CM 1:4, complete all as specified and directed.

M&L for Coloured Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and incl 10mm thick plaster in cement mortar (1:3) complete all as specified and directed.

M&L for non skid coloured cermic ENDURA tiles (square/rectangular) , area of each tiles exceeding 0.06 Sqm but n. exc. 0.11 Sqm 10mm thick as in floor, set and jointed in neat cement slurry & pointed with coloured cement to match the shade of tiles laid over & including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in hite or coloured cement to match tiles over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

All as per item No 36.00 above but as in skirting / dado over & including 10mm thick plaster in CM 1:4 backing coats etc complete all as specified and directed.

M&L for in repair for 18 to 20mm thick granite tiles machine cut in vertical surfaces such as on gate pillars in single piece laid over 10mm thick cement screed in cement mortar 1:3 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the granite stone including grinding and polishing complete all as specified and directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins in repairs, etc. complete all as specified and directed. (each line wire to be measured)

Restraining Resecuring including making good wire staples of galvenised barbed wire etc in repair complete all as specified and directed.

M&L for Preparation of old steel surfaces of any description n. exc 10 cm in width or girth and applying two coats of aluminium paint complete all as specified and directed.

M&L in repair for 35mm thick Precast Cement Concrete jallies 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate ) set in CM 1:4 any design or shape as instructed by Engineer in Charge including RCC pillars 10 CM X 10 CM upto same height of jallies for fixing in position complete all as specified and directed.

Cleaning of Chocked sewer line of 100 mm dia any depth through manually or through mechanical appliances and making sewer line functional, complete including working under foul conditions and deposting the sludge rubbish etc off the premises at an isolated places not exceeding 5Km distance complete all as specified and directed by Engineer in charge. Note :- Manholes connected with effected sewer line shall be measured separately.

Cleaning of Chocked sewer line of 150 mm dia any depth through manually or through mechanical appliances and making sewer line functional, complete including working under foul conditions and deposting the sludge rubbish etc off the premises at an isolated places not exceeding 5Km distance complete all as specified and directed. Note :- Manholes connected with effected sewer line shall be measured separately.

Cleaning of Chocked sewer line of 200 mm dia any depth through diesel running vehicle mounting hydraulic operated high pressure suction-cum-jetting sewer cleaning machine fitted with pump having suction capacity and water jetting tank including skilled operator, supervisor/engineer and two safaiwala etc including working under foul conditions and deposting the sludge rubbish etc off the premises at an isolated places not exceeding 5Km distance complete all as specified and directed. Note :- Manholes connected with effected sewer line shall be measured separately.

Desluding/dewatering/cleaning of existing manhole of any depth by any means ie mechanically or manually operated by taking out off sludge or solid waste night soil (silt) in any proportion and silted soil from the existing manhole of any size and including working under foul condition and depositing the removed sludge rubbish etc from the premises complete all as specified and directed. NOTE :- Sludge or soil night waste soil (silt) will be disposed of the area out of premises of MOD and covered the same by bleaching powder @ 1.5 Kg/Sqm over surface of night soil or sludge.

Cleaning of chocked water closet/WC/Floor trap/Gully trap etc manually by taking of sludge waste, night soil and silted soil from the existing pipe, by taking out accumulated garbage, silt, mud etc and removing the same at a distance not exceeding 50 metre (where directed), washing and well flushing of the floor trap/WC/gully trap with water complete all as specified and directed.

Demolition and breaking up SGSW drain pipes of internal dia 150 mm, set in cement mortar or concrete complete all as specified and directed. Note: Excavation & earth work shall be measured & paid separately under respective items.

Demolition and breaking up SGSW drain pipes of internal dia 200 mm, set in cement mortar or concredte bed complete all as specified and directed. Note: Excavation, earth work,salt glazed stoneware drain pipes,concrete bed to drain pipes shall be measured & paid separately under respective items.

M&L for salt glazed stoneware drain pipes 200 mm bore, grade 'A' laid in trenches and jointed in cement mortar 1:1 all as specified and directed.

M&L for salt glazed stoneware drain pipes 150mm bore, grade 'A' laid in trenches and jointed in cement mortar 1:1 complete all as specified and directed.

M&L for concrete bed to drain pipes 200 bore including packing under and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C2 using 40mm graded crushed stone aggregate complete all as specified and directed.

M&L for concrete bed to drain pipes 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C2 using 40mm graded stone crushed aggregate complete all as specified and directed.

S&F in repair PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls/floor, 110 mm bore complete all as specified and directed

S&F in repair PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls/floor, 75 mm bore complete all as specified and directed

S&F in repair 110 mm dia PVC (SWR) bends any radius complete all as specified and directed

S&F in repair 110 mm dia PVC (SWR) with access door bends any radius complete all as specified and directed

S&F in repair 75 mm dia PVC (SWR) bends any radius complete all as specified and directed

S&F in repair 75 mm dia PVC (SWR) with access door bends any radius complete all as specified and directed

S&F in repair PVC SWR floor trap 75 mm dia with grating incl jointing with solvent cement complete all as specified and directed.

S&F in repair110 mm bore PVC (SWR) junction single (single T) equal or unequal with access door complete all as specified and directed

S&F in repair 110 mm bore PVC (SWR) vent Cowl complete all as specified and directed

Dismantling posts or struts (wood, steel or R.C.C.) embeded in concrete any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any weight n exceeding 4kg/sqm complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum in soft/loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

M&L for cement concrete Type B0 1:2:4 (12.5 mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

Dismantling timber scantlings exc 40 Sq Cm in section, in any position. complete all as specified and directed.

M&L for steel work conforming to Fe 410-0 or Fe 310-0 in joist channel angle rolled section ,ms plate,sheet as in door , posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.complete all as specified and directed.

Supply only MS galvanised chain link fencing, any size or shape as per sample approved by GE complete all as specified and directed.

Fixing only chain link fencing including any size & type line wires, any mesh, size and to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

M&L for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square not exc 5 cm long dia of neck 11 to 15 mm complete all as specified and directed.

Dismantling of old unserviceable AC corrugated/plain sheets in roof covering including ridges, hips, valleys and flashings etc . complete all as specified and directed.

M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old /untreated steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Dismantling of ceiling boards of any type and any thickness including cover fillets and timber frame work complete all as specified and directed.

M&L for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges 15 mm each and web of 45mm suspended from soffit at approx 900mm centre with GI cleat and steel expansion fastener with and incl ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre with 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to G framework fixed in ceiling complete all as specified and directed.

S&F aluminum window (powder coated) with aluminum anodized frame of aluminum section 47.62 x 44.45 x 1.88 mm thick with shutters having styles & rails of aluminum section 47.62 x 44.45 x 1.62 mm thick including jointing cleats, glazing clips, rubber packing, aluminum snap beading, screws anodized aluminum fittings such as hinges, tower bolts (02 Nos.), handles (2 Nos.), etc. including 5.5 mm thick ordinary plain glass complete. fixed in repair, complete all as specified and directed.

S&F aluminium door (powder coated) single leaf with anodized aluminium frame of section 47.62 x 44.45 x 1.88 mm thick, shutter with bottom & middle rail of section 100 x 44.5 x 2 mm thick and styles & top rail of section 85 x 44.5 x 1.56 mm thick with centrally locking arrangement with lock (make: ‘GODREJ’ or ‘LINK’ 7) lever and floor door spring hydraulically regulated including jointing cleats 02 Nos 150mm long aluminium handle & 02 Nos 150mm tower bolt and glazing with 5.5 mm thick ordinary plain glass including necessary fittings, fixtures & aluminium snap beads, fixed in repair, complete all as specified and directed.

Dismantling of existing wall paneling with fillet from wall complete all as specified and directed.

S&F ACP sheet 3mm thick of any type any size and at any location including beeding fixed to wall painting, complete all as specified and directed.

S&F anodised Aluminium frame for doors, windows, partition and other misc frame work as per site requirement with & including necessary fittings, fixtings & aluminum span beading complete all as specified and directed.

SS CONSTRUCTION

vs construction

AMARDEEP ENTERPRISES

Ram Babu Bros

gangotri enteriprises