SPECIAL REPAIR TO ROOFING SHEETS FALSE CEILING FLOORING PLASTERING IN BLDG NO P 39 OF RECORD AND BLDG NO P 31 OR LIVING BK OF RVC CENTRE COLLEGE UNDER AGE BR II AND AGE E M I OF GE NORTH MEERUT CANTT

Amount

M &L for Brickwork with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

All as per Srl item No 01 here-in-before but except bricks

Supply only liquid water proofing compound complete all as specified and directed.

M&L for cutting chases, pinning in, in brick wall , making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring. etc. and making good, cutting not exceeding 10cm girth complete all as specified and directed.

M&L second class hard wood as in purlins, rafter etc complete all as specified and directed

S&F Factory made glazed, gauzed and skeleton shutters 35 mm thick 2nd class hardwood (SAL/ CHAMP / HOLLOCK) open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); for doors and fitted to chowkats complete all as specified and directed.

S&F Factory made glazed, gauzed and skeleton shutters 40 mm thick 2nd class hardwood (SAL/ CHAMP / HOLLOCK) open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); for doors / window shutters and fitted to chowkats complete all as specified and directed.

All as per Srl item No 07 here-in-before but glazed and skeleton fixed type ventilator

S&F Factory made plain, framed, panelled shutters (any number of panels), of 2nd class Hardwood (HOLLOCK / CHAMP / SAL) 35mm thick with panels of timber flaton both sides (feather edges), or of veneered particle board medium density, wood particle board with commercial face veneers; and fitted to chowkats complete all as specified and directed.

S&F Factory made plain, framed, panelled shutters (four panels), of 2nd class Hardwood 40mm thick with panels of timber flaton both sides (feather edges), or of veneered particle board medium density, wood particle board with commercial face veneers; and fitted to chowkats complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) not exc. 1.5 sqm each, complete all as specified and directed. Note :- Rate also incuding in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) exc 1.5 sqm but not exc. 4 sqm each, complete all as specified and directed. Note :- Rate also incuding in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

Taking down shutters of any description exc 1 but n exc 2 sqm each, including builders hard ware fittings complete all as specified and directed.

Supplied and fixed steel windows with pressed steel frame made out from 1.25 mm thick steel with one or more rebate with glazed shutters and fly proofing shutters including guard bars, hinges, peg stay , handles tower bolts lugs including treated with tar or coal tar black paint on steel surfaces in contact / embedded in concrete / masonry work complete all as specified and shown on drawings (Note : Disturbed surface of wall shall be made good to true surface)

S&F 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt having shoot / dia of bolt not less than 10mm complete all as specified and directed.

S&F 250 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.

S&F Butt hinges of 100 mm size, Medium weight, cold rolled mild steel and fixed, complete all as specified and directed.

S&F 150mm size Mild steel pressed handles, oval type, stove enamelled black, complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including necessary beadings complete all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including necessary beadings complete all as specified and directed.

S&F rolled mild steel in rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates and fixing conf to Fe-410-w (Gde-E -250) quality A complete all as specified and directed.

S&F rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to Fe-290 (Gde E-165) complete all as specified and directed.

S&F anodised aluminium snap grid frame work for size of grid 605x605 mmfor false ceiling complete all as specified and directed.

M&L for bitumastic gola, with 80/25 bitumen and coarse sand mixture 1:3 by weight 8cm x 8cm at the junction of roofing to vertical surfaces specified and directed

Dismantling of manglore pattern roofing tiles or state roofing any description single/ double layers with ceiling tiles complete all as specified and directed.

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based plain sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding / ridge to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions

Supplied and fixed fibre cement coloured textured designer ceiling board 4mm thick of size 595x595 mm conforming to IS : 14862 & IS : 2380 Part-XIV fixed to timber / GI / Aluminium frame work with screws/clips complete all as per manufactures instructions and as directed. Make : Everest, Charminar, UPAL.

All as per item No 28 here-in-before but except ceiling board

M & L for laying Non Skid ceramic tiles 7 to 8 mm thick, (square / rectangular) jointless area of each tile exc 0.18sqm but n.exc 0.38 sqm first quality coloured in floors etc, set in neat cement slurry over CM screed (screed shall be measured and paid for separately under respective item), jointed complete all as specified and directed".

All as per item No 30 here-in-before but on vertical surfaces

M&L for laying 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in floor/plinth protection, cement concrete surfaces finished even & fair without using extra cement complete all as specified and directed.

Dismantling of floor, hearth or wall tiles / terrazzo including cement mortar bedding (but not backing),removal servicable tiles to store and rubbish off the premises, complete all as specified and directed.

Roughening surface of old concrete floor surface by picking , sweeping cleaning and washing down with water to remove dust etc from the site complete all as specified and directed.

M&L for 18-20 mm thick machine cut Kota stone slabs of size 540 mm x 540 to 560mmx 560mm in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the stone slabs, over and including 20mm thick cement screed in CM (1:6), including necessary grinding rubbing rounding to exposed edges and polising in granite finish complete all as specified and directed.

All as per Srl item No 35 here-in-before but in risers of steps, skirting, dado and pillars laid over and including 10mm thick screed bed in CM (1:4)

M&L in repair for laying 80 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-40 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 50mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed. Make : NITCO, Mumbai ; Redsun tiles & Pavers, panchkula ; Star Tiles & Industries, Rama Devi, Kanpur ; Mayur tiles & Interlocking Pavers, Lucknow ; Mehatab tiles, indore ; Tulip Infrastructure, Saharanpur (U.P)

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete vertical surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and directed.

M&L for rendering 15mm thick cement plaster with cement mortar (1:4) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement with using water proofing compount. Note :- Water proofing compound will be measured and paid seperately.

M&L for preparing the newly plastered surfaces and applying two coats of cement base paint over a coat of primer on walls / vertical surfaces complete all as specified and direcrted.

M&L for preparing the newly plastered surfaces and applying two coats of oil bound distemper paint over a coat of chalk whitening on walls / vertical surfaces complete all as specified and direcrted.

M&L for preparing of old decorated surfaces of walls (plastered or un plastered) including petty repairs with wall care putty and applying one coat of cement base paint complete all as specified and directed

M&L for complete removal of existing treatment and preparing of old decorated surfaces of walls ( plastered or un plastered ) including cornices, pilasters etc and applying two coats of oil bound distemper over and including 2mm thick wall care putty complete all as specified and directed

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying two coat of white / tinted synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying one coat of white / tinted synthetic enamel paint complete all as specified and directed

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of old painted steel surface of any description over 10 cm in width or girth and applying one coat of white / tinted synthetic enamel paint complete all as specified and directed

M&L for 3 mm thick sheet glass, ordinary quality and glazing with oil putty or glazing pins in square n exc 0.5 sq. m in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size,quality or description) from metal frames including punching or drilling out old glazed pins / spring clip and rubbish off the premises complete all as specified and directed.

M&L for cutting , grinding, polishing to existing terrazzo or kota stone floor and skirting etc including pointing in white or coloured cement using pigment to achieve mirror finish complete all as specified and directed.

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and directed.

Demolition of cement concrete in ground floors and paving n.exc 15cm thickness(below or above ground level) and including removal of debris & rubbish from the site complete all as specified and directed. Note : Stone slabs / tiles and hard core of any description shall not be measured & paid under this item.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors) beems, staircases, landing, chajjas and similar work and including removal of debris & rubbish from the site complete all as specified and directed.

Dismantling mild steel beam any section including taking out embedded portion, beam embedded in masonry work complete all as directed by Engineer-in-Charge

Dismantling of structrual steel work of any description ISMB, angle iron, including doors, gates but excluding framed truss complete all as specified and directed.

Dismantling of timber scantling framed work 40sqcm and over in section in any position complete complete all as specified and directed.

Dismantling in timber fillets, rails, posts, rafters, purlins, etc under 40 sq cm in section complete all as directed by Engineer-in-Charge

Dismantling corrugation or semi corrugation steel sheeting any thickness any gauge any pattern as in roof covering in roof complete all as specified and directed.

Dismantling of wall or ceiling board (fiber,pulp,insulation etc) any thickness including cover fillets and removal from the site complete all as specified and directed.

M&L for 100 mm thick PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregates) as in side of paver block rounded on edges complete all as specified and directed.

Demilition of cement concrete (unreinforced) as in arches type roof complete all as directed by Engineer-in-Charge

Taking down carefully any type of battens or conduit point wiring with or except conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge.

M&L Sheet metal enclosure for DB's with 200 amp rated bus bar 240 volt SPN 12 way with double door.fixed flush to wall including all cutting chiseling of wall as required and making good disturbed surface as per existing all as specified and directed .

Supply and fixing sheet metal enclosure, double door, Triple pole and neutral, AC, 440 volts, 04 way,DPX 125+12 modules with provision to mount DPX 125 MCCB 4 pole as incomer and SP/DP MCB as outgoing, with 200 Amps rated copper bus bar, pan assembly etc and IP - 43 & IK 09 protection with metal door and flush to wall including all cutting etc, on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in - Charge.

S&F MCCB 4 pole 63 A, 16kA, 415 V, 50 Hz, type DPX, frame size 125 with adjustable thermal & magnetic release , complete all as directed by Engineer - in - Charge.

S&F Isolator ,2 pole 40 amps 'C' series for AC complete all as directed by Engineer - in - Charge.

S&F MCB Single pole 'C' series 6 to 30 amps 10 KA capacity complete all as directed by Engineer - in - Charge.

M&L for Point wiring complete with 1.5 sq mm single core PVC insulated cable, with multi standarded copper conductors, 1100 volts grade, drawn through and including non metalic rigid PVC conduit with all conduit accessories (including concealing and making good to the disturbed surfaces of walls, ceiling, floors etc. including making good the disturbed surfaces and touch up distemper to match with the existing surface) and including provisoin of 1.5 sq mm PVC insulated copper cable as earth continiuty conductor connected to common earth dolly complete all as specified and as directed. (a) One light/fan/bell point wiring controlled by one, one way switche

All as per Srl item No 71 here-in-before but one socket outlet point 3pin 5 amps on same board controlled by one, one way switche

All as per Srl item No 71 here-in-before but one socket outlet point 3pin 5 amps on independent board controlled by one, one way switche

All as per Srl item No 71 here-in-before but using 2.5 sqmm nominal area, PVC copper conductor wiring for 6 pin 15 amps socket outlet on indipendent board all as specified and directed.

M&L for switch piano flush type, 5/6 Amps single pole one way ISI marked complete all as specified and directed .

M&L for switch piano flush type, 15 Amps single pole one way ISI marked complete all as specified and directed .

S&F socket outlet 3 pin, 5/6 amps and 2 pin 5/6 amps flush type ivory finish complete all as specified and directed.

M&L for socket outlet flush type 2 in 1, 3 pin , 5 and 15 Amps ISI marked complete all as specified and directed .

Supply and fixing ceiling fan regulator, electronic, stepped type, rotary 0 to 04 steps, humfree, AC, 230 volts, 100 watts,on existing phenolic laminated sheet etc, as required duly ISI marked complete all as specified & directed.

S & F ceiling rose PVC /polycarbonate, insulated plated body 50x20 mm dia three terminals ISI marked fixed on 100x100 mm pressed steel box with 3 mm thick bakelite sheet cover complete complete all as specified and directed .

Supply & fixing lamp holder (Angular / Straight), insulated body, PVC/polycarbonate type fixed on 100x100 mm pressed steel box with 3 mm thick Bakelite sheet cover complete all as specified & directed.

S&F LED tube light fitting 20 watt surface mounting decorative box type batten T-8 diffuser type complete all as specified & directed.

M&L for sub main wiring along with earth wire with 2 x 6 Sq mm + 1 x 6 Sq mm FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade, copper conductor cable single core, drawn through and including PVC conduit and its all accessories (including concealing and finising to match with the sorroundings) of suitable size on wall/ roof surfaces complete all as specified and as directed by Engineer-in-charge. NOTE:- Two runs of 6.0 Sq mm, one run of 6.0 Sq mm copper cable and one run of PVC Conduit shall be measured as one unit length.

Taking down carefully unserviceable Sub main wiring of any size and type including making good the disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge.

Earthing complete with galvanised steel earth plate electrode 600X600X6 mm thick, burried directly in ground,earth pit not less than 2.25 meter deep below ground level with top edge of earth plate not less than 1.5 meter below ground level, steel earth plate connected with GI strip 36x3 mm dia by means of bolts, nuts, check nuts and washer of galvanised iron or steel as shown in electrical plate No. 5 connected to earth test point all as described in MES schedule part II including excavation earth work concreate pit with 50 mm thick RCC cover in RCC 1:2:4 type B-I duly reinforced with TMT bars 8mm dia @ 150 C/C both ways and pit chamber in PCC 1:2:4 type B-I with 2 Nos suitable lifting handles of 12 mm MS bar and GI protection pipe of suitable size,and watering pipe 20 mm dia with water funnel test point and extra length up to 7.5 meter connected to main switch board all as specified. (Note : Main earth lead beyond 7.5 metre measured and paid for separately).

M&L for security light fitting 1 x 25 LED type, drawn through and including GI bracket of size 25 mm dia bore light grade 1.4 mtr long, bend to shape including MS clamps made out of flat iron of size 32 x 4 mm - 02 Nos and necessary nuts, bolts, washer as required complete all as specified and as directed by the Engineer-in-Charge.

M & L for XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 25 sqmm, 4.0 core complete all as specified and directed.

Excavation in trenches soft/loose soil not exc 1.5m wide and not exc 1.5m in depth for laying pipe line including trimming bottom surfaces to required level and slope etc and getting out complete all as specified and directed.

Returning .filling in ,intrenches including spreading levelling, watering and well raimming in layers n. exc 25cm thick in soft/loose soil complete all as specified and directed.

Removing excavated surplus soil to a distance not exc. 50m and depositting where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.

M&L for sand filling ,fine river sand in trenches for under ground cable all as specified and directed. Note Punned thickness only will be measured.

M & L Fly ash Bricks for protection cover to under ground cable (with standard size fly ash bricks) with width equal to length of brick laid dry and flat abutting each other complete all as specified and directed.

R.D.Builders

Rajneesh Jain

SHRI BALAJI ENTERPRISES

Arun Construction Co.

Manglam Engineers and Construction Co

veer enterprises

Jay Ambay Enterprises

BASANT ENTERPRISES