Electrification works at Satvaiya Farm for newly constructed i)Mushroom Production unit, ii)Poultry Brooder house and (iii) 2 nos. Duckery unit at Satvaiya farm, under WBCADC Siliguri-Naxalbari Project.

A. Meter Room..... Supplying and fixing 415V, 100 Amp. TPN SFU (Havells make) with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. 100 Amp. DIN type HRC fuse.[Main incoming switch from Grid supply]

Supplying and fixing 63 Amp. 415V, TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating (Havells make)[2nos. for Grid supply outgoing & 1no. for D.G. supply outgoing ] .

Supplying and fixing 32 Amp. 415V, TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. 32 Amp. DIN type HRC fuse (Havells make).(1 for D.G. supply outgoing)

Supplying & fixing 200 A 415V sheet metal (16 SWG) TPN Iron Clad Busbar chambers (500 mmx150 mm) on angle iron frame on wall, incl. earthing attachment and painting as required as per direction of E.I.C. {Dimension of the 4 nos Copper bar ( 85 mm long x20 mm breadth x 5 mm thick )}. [ For Grid supply

Supplying & fixing 100 A 415V sheet metal (16 SWG) TPN Iron Clad Busbar chambers (500 mmx150 mm) on angle iron frame on wall, incl. earthing attachment and painting as required as per direction of E.I.C. {Dimension of the 4 nos Copper bar ( 85 mm long x15 mm breadth x 3 mm thick )}. [ For D.G. supply]

Supplying and Drawing of 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Finolex/ Polycab/ Havells) of the following sizes in PVC rigid conduit pipe incl. Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make]on wall, ceiling with saddles and other accessories as required and mending good damages to building works as required. i) 4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as ECC in 2x 25 mm. size PVC rigid conduit (From 63 Amp.Main Switch to Busbar Chamber for D. G.) ( From 200 Amp. Busbar Chamber to 63 Amp. Mainsw. For Grid supply)

Supplying and Drawing of 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Finolex/ Polycab/ Havells) of the following sizes in PVC rigid conduit pipe incl. Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make]on wall, ceiling with saddles and other accessories as required and mending good damages to building works as required. ii) 4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC in 2x 25 mm. size PVC rigid conduit ( From Busbar to 2 nos. Main switches ) ( D.G. supply)

Supplying and Drawing of 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Finolex/ Polycab/ Havells) of the following sizes in PVC rigid conduit pipe incl. Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make]on wall, ceiling with saddles and other accessories as required and mending good damages to building works as required. iii)2x[ 4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC] in 3x 25 mm. size PVC rigid conduit [From Kit-Kat to 200 Amp. Busbar Chamber via 100 Amp. Main Switch ] [Grid Supply]

Finishing of the PVC insulated copper wire ends by Socketing with PIN /Ring type copper sockets and insulated types etc. Including supplying sockets, tapes . i) 16 Sqmm

Finishing of the PVC insulated copper wire ends by Socketing with PIN /Ring type copper sockets and insulated types etc. Including supplying sockets, tapes . i) 10 Sqmm

Finishing of the PVC insulated copper wire ends by Socketing with PIN /Ring type copper sockets and insulated types etc. Including supplying sockets, tapes . i) 06 Sqmm

Excavation of soil for installation of Earth Electrode and filling & ramming For Soft Soil

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level by TATA-Medium GI pipe.

Supplying & fixing earth busbar of galvanized (Hot Dip)MS flat 50 mmx 6 mm on wall having clearance of 6 mm from wall incl. providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.

Connecting the equipments body to earth busbar including S & F 25 mm x 6mm galvanised(Hot Dip)MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts,washers etc. / welding properly as per direction of E.I.C.

(B)Mashroom Production unit.................. Supplying and fixing 63 Amp. 415V, TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos.DIN type HRC fuse as per rating (Havells make)

Supplying and fixing 32 Amp 240 Volt DPIC Sheet steel Main Switches with fuses on L & N on flat iron frame on wall (Havells make)

Supplying & fixing 100 A 415V sheet metal (16 SWG) TPN Iron Clad Busbar chambers (500 mmx150 mm) on angle iron frame on wall, incl. earthing attachment and painting as required as per direction of E.I.C. {Dimension of the 4 nos Copper bar ( 85 mm long x15 mm breadth x 3 mm thick.

S&fixing 250V, [2+8] way, 6-10A per way, SPN MCBDB with SS enclosure double door with IP-42/43 protection incl. S & fixing one no 40A DP isolator and 8 nos 6-15A SP MCB. (‘C’ Curve, 10KA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment flushed on wall as per direction of E.I.C. with all accessories. as required {Make - Havells , Enclosure (DHDMSNHOSI08)}

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish. ( Average run 5 mtr )

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 6A 3 pin Modular type plug socket & switch (Brand approved by EIC) on 4 Module GI switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works.(On Board)

Supplying and Drawing of 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire(Finolex/ Polycab/ Havells) of the following sizes in PVC rigid conduit pipe incl. Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make]on wall, ceiling with saddles and other accessories as required and mending good damages to building works as required. i) 4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC in 2x 25 mm. size PVC rigid conduit ),(From Existing Busbar Chamber to Main sw. and Main sw. to New Busbar Chamber of Mashroom production unit )

Supplying and Drawing of 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire(Finolex/ Polycab/ Havells) of the following sizes in PVC rigid conduit pipe incl. Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make]on wall, ceiling with saddles and other accessories as required and mending good damages to building works as required. ii) 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC in 25 mm. size PVC rigid conduit ) , (From 2 nos. DPIC Main switch to 2 nos. SPNIC BDB )

Supplying and Drawing of 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire(Finolex/ Polycab/ Havells) of the following sizes in PVC rigid conduit pipe incl. Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make]on wall, ceiling with saddles and other accessories as required and mending good damages to building works as required. iii) 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC in 20 mm. size PVC rigid conduit ( for 15 A power plug only)

Supplying and Drawing of 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire(Finolex/ Polycab/ Havells) of the following sizes in PVC rigid conduit pipe incl. Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make]on wall, ceiling with saddles and other accessories as required and mending good damages to building works as required. iv) 3 x 22/0.3 (1.5 sqmm) as ECC in 20 mm size PVC rigid conduit ( for 5 A power plug only)

Finishing of the PVC insulated copper wire ends by Socketing with PIN /Ring type copper sockets and insulated types etc. Including supplying sockets, tapes. i) 10 Sqmm

Finishing of the PVC insulated copper wire ends by Socketing with PIN /Ring type copper sockets and insulated types etc. Including supplying sockets, tapes. ii) 6 Sqmm

Finishing of the PVC insulated copper wire ends by Socketing with PIN /Ring type copper sockets and insulated types etc. Including supplying sockets, tapes. iii) 4 Sqmm

Finishing of the PVC insulated copper wire ends by Socketing with PIN /Ring type copper sockets and insulated types etc. Including supplying sockets, tapes. iv) 2.5 Sqmm

Finishing of the PVC insulated copper wire ends by Socketing with PIN /Ring type copper sockets and insulated types etc. Including supplying sockets, tapes. v) 1.5 Sqmm

Supplying ,Laying & Erection of following sizes 1.1 KV grade XLPE insulated armoured Aluminium cables (Finolex/Polycab/Havells ) including supply and erection with No.6 SWG GI (Hot Dip) continuous earth wire with Galv. (Hot Dip) earth clampas per direction of E.I.C. (From Main switch to Main switch ) i) 4 core 16 sq. mm. cable

Supplying , Laying & Erection of following sizes 1.1 KV grade XLPE insulated unarmoured Aluminium cables (Finolex/Polycab /Havells ). including supply and erection with No.6 SWG GI(Hot Dip) continuous earth wire with Galv. (Hot Dip) earth clamp (From pole to pole and fittings as per direction of E.I.C.) (For Outdoor light) i) 2 core 6 sq. mm. cable

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : i) 4 core 16 sq. mm. cable

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anti corrosive paste & jointing materials . i) 4 core 16 sq. mm. cable

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anti corrosive paste & jointing materials . ii) 2 core 6 sq. mm. cable

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed as per direction of E.I.C

Supplying & fixing 25 mm dia medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required.

Supplying of Swaged Steel Tubular pole 6 Mtr. Long ,4 SWG , 54 Kg. with supplying and fixing of M.S. sole plate (450 x 450 x 6m) at the bottom of the pole and G.I. Pole Cap for suitable size for carrying 4 core 16 sq.mm cable and earth wire complete with Galv. clamp for stay, insulators etc., as per direction of EIC .

Supplying & Erection of Galv. ‘D’ iron complete with suitable pole clamp 100mmx114mm porcelain shackle insulator & 19 mm dia Galv. bolts & nuts. incl. painting.

Erection of single steel tubular pole up to 9m length with/ without sole plate & Cap etc. in CC foundation (4:2:1) dimension 0.6x0.6x1.70 mts having 600x600x150 mm thick CC (4:2:1)base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts.above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site incl. filling up the excavated earth pit with shifted soil and ramming properly.

Supplying & Fixing 40 mm dia 3.20 metre long (incl. bends) ‘L‘ Type service bracket on wall for carrying 4 core 16 sq. mm cable and earth wire complete with Galv. clamp for stay, insulators etc., 7/14 SWG stranded Galv. (Hot Dip) wire for stay with 230x13 mm dia straining serews, 75x88 mm porcelain shackle insulators with Galv. (Hot Dip) strips etc. and painting .

Supplying of (EPC make) exhaust fan 300 mm sweep 900/1400 (12") heavy duty with mounting frame , blades A C 230-250 Volt as required.

Fixing only 30 cm Exhaust fan (12") after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection.

Supply & Fixing Aluminium louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) for 30 cm (12") Exhaust fan.

Supply & delivery of 1200mm (48 inch)sweep 1 phase 60/70 watt 5 star heavy duty AC ceiling fan complete with all accessories i.e. blades, down rod ,canopy, fork, rubber bush etc[ Orint Quasar/Crompton]

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Supplying & Fixing iron beam fan clamp of two piece type, as per approved specification, fabricated from 40 mm x 9 mm MS sheetflat suitable for beam having flange upto 150 mm wide .

Supply only 25mm dia GI Conduit 1.6mm thick for extension of fan rod including supply and connection 3x1.5 sq. mm. single core stranded 'FR' PVC insulated & unsheathed copper wire (Make- Finolex/Havells/Polycab) for fixing the fan below the false ceiling as per direction of E.I.C. as required.

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Legrand) on existing Modular GI switch board with top cover plate incl. Making necy. connections etc .

Supply and delivery of TMC 501 Conventional industrial batten Philips single LED fitting model no. : TMC 501 P 1 xT- LED 22 watt P3241 with 1 no. MAS LED tube 1200 mm 18 W 865 T8 I- 2100 Im including necessary connection.(Warranty should not be less than 02 years)(HSN Code-9405)

Fixing only single LED tube light fitting complete with all accessories suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/ 0.20 mm(1.5sqmm.) flexible copper wire of 1.10 mt. length.

Supplying & Fixing bulk head light fitting (Bajaj/Havells make) with die cast aluminium housing & frosted glass on wall/ceiling incl. S&F 10 watt LED lamp with complete set.

Supply and fixing of smart bright street light fitting (36 watt) complete with all accessories to be fixed /projected from the wall of the building or on pole including making holes / providing clamping arrangement & necessary reducer as required including supply and fixing 40 mm dia G. I. pipe (ISI Medium) quality 1.5 mtrs average length having suitable bend including supply and fixing necessary length of 3x1.5 sq. mm. PVC insulated single core stranded annealed copper wire and making connection as required and mending good damages to wall including painting etc.(Crompton Greaves or equivalent with 5 years warranty )

S & F Sintex make Loop box including 4 connector terminal and 1 no. Kitkat fuse as per direction of EIC

Supplying & Fixing 2 Module GI Modular Switch Board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works (If neccy.) [ for light operation ]

Supply & Fixing 240 V 16 A Modular type switch ( Make - Legrand ) on existing GI Modular type switch board having top cover plate and making necessary connections as required .

Supply & Fixing 240 V, 2 nos 5A/10 A, 3 pin Modular type plug socket (Legrand) with 2nos 5A/10A Modular type switch, without plug top on 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket ( Make - Legrand ) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire .

Excavation of soil for installation of Earth Electrode and filling & ramming For Soft Soil .

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level by TATA-Medium GI pipe

Supplying & fixing earth busbar of galvanized (Hot Dip)MS flat 50 mmx 6 mm on wall having clearance of 6 mm from wall incl. providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.

Connecting the equipments body to earth busbar including S & F 25 mm x 6mm galvanised(Hot Dip)MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc./ welding properly as per direction of E.I.C.

C)Duckery Unit - 2 nos. Supplying and fixing 63 Amp. 415V, TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos.DIN type HRC fuse as per rating (Havells make.

Supplying and fixing 32 Amp 240 Volt DPIC Sheet steel Main Switches with fuses on L & N on flat iron frame on wall (Havells make) .

Supplying & fixing 100 A 415V sheet metal (16 SWG)TPN Iron Clad Busbar chambers (500 mmx150 mm) on angle iron frame on wall, incl. earthing attachment and painting as required as per direction of E.I.C. {Dimension of the 4 nos Copper bar ( 85 mm long x15 mm breadth x 3 mm thick )}.

Supplying and fixing 415 V , 16- 32A per way , 4 way double door Horizontal TPN MCB Distribution board with IP-42/43 protection incl. S & F one no 63A Four Pole MCB Isolator and 12 nos. 6 A -32 A SPMCB (‘C’ Curve, 10KA) as outgoing, oncealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment .(L & T/Havells make)

S&fixing 250V, [2+8] way, 6-10A per way, SPN MCBDB with SS enclosure double door with IP-42/43 protection incl. S & fixing one no 40A DP isolator and 8 nos 6-15A SP MCB. (‘C’ Curve, 10KA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment flushed on wall as per direction of E.I.C. with all accessories. as required {Make - Havells , Enclosure (DHDMSNHOSI08)}

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch boardwith top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish. ( Average run 5 mtr )

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 6A 3 pin Modular type plug socket & switch (Brand approved by EIC) on 4 Module GI switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works.(On Board)

Finishing of the PVC insulated copper wire ends by Socketing with PIN /Ring type copper sockets and insulated types etc. Including supplying sockets, tapes iv) 2.5 Sqmm

Finishing of the PVC insulated copper wire ends by Socketing with PIN /Ring type copper sockets and insulated types etc. Including supplying sockets, tapes vi) 1.5 Sqmm

Supplying ,Laying & Erection of following sizes 1.1 KV grade XLPE insulated armoured Aluminium cables (Finolex/Polycab/Havells ) including supply and erection with No.6 SWG GI (Hot Dip) continuous earth wire with Galv. (Hot Dip) earth clampas per direction of E.I.C. (From Main switch to Main switch ) i) 4 core 16 sq. mm. cable

Supplying , Laying & Erection of following sizes 1.1 KV grade XLPE insulated unarmoured Aluminium cables (Finolex/Polycab/Havells ). including supply and erection with No.6 SWG GI(Hot Dip) continuous earth wire with Galv. (Hot Dip) earth clamp (From pole to pole and fittings as per direction of E.I.C.) (For Outdoor light) i) 2 core 6 sq. mm. cable

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : i) 4 core 16 sq. mm. cable

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials i) 4 core 16 sq. mm. cable

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials ii) 2 core 6 sq. mm. cable

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed as per direction of E.I.C

Supplying & fixing 25 mm dia medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required.

Supply & delivery of 1200mm (48 inch)sweep 1 phase 60/70 watt 5 star heavy duty AC ceiling fan complete with all accessories i.e. blades, down rod ,canopy, fork, rubber bush etc[ Orint Quasar/Crompton]

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Supplying & Fixing iron beam fan clamp of two piece type, as per approved specification, fabricated from 40 mm x 9 mm MS sheet flat suitable for beam having flange upto 150 mm wide.

Supply only 25mm dia GI Conduit 1.6mm thick for extension of fan rod including supply and connection 3x1.5 sq. mm. single core stranded 'FR' PVC insulated & unsheathed copper wire (Make- Finolex/Havells/Polycab) for fixing the fan below the false ceiling as per direction of E.I.C. as required.

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Legrand) on existing Modular GI switch board with top cover plate incl. Making necy. connections etc

Supply & Fixing of 23.0 Watt LED Lamp ,make Crompton .

Supply and fixing of smart bright street light fitting (36 watt) complete with all accessories to be fixed /projected from the wall of the building or on pole including making holes / providing clamping arrangement & necessary reducer as required including supply and fixing 40 mm dia G. I. pipe (ISI Medium) quality 1.5 mtrs average length having suitable bend including supply and fixing necessary length of 3x1.5 sq. mm. PVC insulated single core stranded annealed copper wire and making connection as required and mending good damages to wall including painting etc.(Crompton Greaves or equivalent with 5 years warranty )

S & F Sintex make Loop box including 4 connector terminal and 1 no. Kitkat fuse as per direction of EIC

Supplying & Fixing 2 Module GI Modular Switch Board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works (If neccy.) [ for light operation ]

Supply & Fixing 240 V 16 A Modular type switch ( Make - Legrand ) on existing GI Modular type switch board having top cover plate and making necessary connections as required .

Supply & Fixing 240 V, 2 nos 5A/10 A, 3 pin Modular type plug socket (Legrand) with 2nos 5A/10A Modular type switch, without plug top on 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket ( Make - Legrand ) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire.

Excavation of soil for installation of Earth Electrode and filling & ramming For Soft Soil .

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts long and 1x4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level by TATA-Medium GI pipe.

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 50 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.

Connecting the equipments body to earth busbar including S & F 25 mm x 6mm galvanised(Hot Dip)MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc./ welding properly as per direction of E.I.C.

D)Poultry Brooder House :.............Supplying and fixing 63 Amp. 415V, TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating (Havells make) [1 for Poultry brooder house] .

Supplying and fixing 415 V , 16- 32A per way , 4 way double door Horizontal TPN MCB Distribution board with IP-42/43 protection incl. S & F one no 63A Four Pole MCB Isolator and 12 nos. 6 A -32 A SPMCB (‘C’ Curve, 10KA) as outgoing, oncealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment .(L & T/Havells make)

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR'(Precision make),with 1x22/0.3 (1.5 sqmm)single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish.( Average run 5 mtr ).

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) singlecore stranded 'FR' PVC insulated & unsheathed copper wire(Brand approved by EIC) in 20mm size PVC rigid conduit 'FR'(Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm)single core stranded 'FR' PVC insulated & unsheathed copperwire as ECC, to 6A 3 pin Modular type plug socket & switch(Brand approved by EIC) on 4 Module GI switch board with3/4 Module top cover plate on wall incl. necy. connectionmaking earthing attachment, painting and mending good damages to building works (On Board )

Supplying and Drawing of 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire(Finolex/ Polycab/ Havells) of the following sizes in PVC rigid conduit pipe incl. Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as requiredand mending good damages to building works as required. i) 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC in 20 mm. size PVC rigid conduit ( for 15 A power plug only)

Supplying and Drawing of 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire(Finolex/ Polycab/ Havells) of the following sizes in PVC rigid conduit pipe incl. Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as requiredand mending good damages to building works as required. ii) 3 x 22/0.3 (1.5 sqmm) as ECC in 20 mm size PVC rigid conduit ( for 5 A power plug only)

Finishing of the PVC insulated copper wire ends by Socketing with PIN /Ring type copper sockets and insulated types etc. Including supplying sockets, tapes i) 2.5 Sqmm

Finishing of the PVC insulated copper wire ends by Socketing with PIN /Ring type copper sockets and insulated types etc. Including supplying sockets, tapes ii) 1.5 Sqmm

Supplying ,Laying & Erection of following sizes 1.1 KV grade XLPE insulated unarmoured Aluminium cables (Finolex/Polycab/Havells ) including supply and erection with No.6 SWG GI (Hot Dip) continuous earth wire with Galv. (Hot Dip) earth clampas per direction of E.I.C. i) 4 core 16 sq. mm. cable

Supplying ,Laying & Erection of following sizes 1.1 KV grade XLPE insulated unarmoured Aluminium cables (Finolex/Polycab/Havells ) including supply and erection with No.6 SWG GI (Hot Dip) continuous earth wire with Galv. (Hot Dip) earth clampas per direction of E.I.C. i) 2 core 6 sq. mm. cable

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials i) 4 core 16 sq. mm. cable

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials ii) 2 core 6 sq. mm. Cable

Supplying & fixing 25 mm dia medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required

Supplying of (EPC make) exhaust fan 300 mm sweep 900/1400 (12") heavy duty with mounting frame , blades A C 230-250 Volt as required.

Fixing only 30 cm Exhaust fan (12") after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection.

Supply & Fixing Aluminium louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) for 30 cm (12") Exhaust fan.

Supply & delivery of 1200mm (48 inch)sweep 1 phase 60/70 watt 5 star heavy duty AC ceiling fan complete with all accessories i.e. blades, down rod ,canopy, fork, rubber bush etc[ Orint Quasar/Crompton]

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Supplying & Fixing iron beam fan clamp of two piece type, as per approved specification, fabricated from 40 mm x 9 mm MS sheet flat suitable for beam having flange upto 150 mm wide .

Supply only 25mm dia GI Conduit 1.6mm thick for extension of fan rod including supply and connection 3x1.5 sq. mm. single core stranded 'FR' PVC insulated & unsheathed copper wire (Make- Finolex/Havells/Polycab) for fixing the fan below the false ceiling as per direction of E.I.C. as required.

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Legrand) on existing Modular GI switch board with top cover plate incl. Making necy. connections etc .

Supply and delivery of TMC 501 Conventional industrial batten Philips single LED fitting model no. : TMC 501 P 1 xT- LED 22 watt P3241 with 1 no. MAS LED tube 1200 mm 18 W 865 T8 I- 2100 Im including necessary connection . (Warranty should not be less than 02 years) (HSN Code - 9405)

Fixing only single LED tube light fitting complete with all accessories suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/ 0.20 mm(1.5sqmm.) flexible copper wire of 1.10 mt. length.

Supply & Fixing of 23.0 Watt LED Lamp ,make Crompton

Supplying & Fixing 2 Module GI Modular Switch Board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works (If neccy.) [ for light operation ]

Supply & Fixing 240 V 16 A Modular type switch ( Make - Legrand ) on existing GI Modular type switch board having top cover plate and making necessary connections as required .

Supply and fixing of smart bright street light fitting (36 watt) complete with all accessories to be fixed /projected from the wall of the building or on pole including making holes / providing clamping arrangement & necessary reducer as required including supply and fixing 40 mm dia G. I. pipe (ISI Medium) quality 1.5 mtrs average length having suitable bend including supply and fixing necessary length of 3x1.5 sq. mm. PVC insulated single core stranded annealed copper wire and making connection as required and mending good damages to wall including painting etc.(Crompton Greaves or equivalent with 5 years warranty

S & F Sintex make Loop box including 4 connector terminal and 1 no. Kitkat fuse as per direction of EIC

Supply & Fixing 240 V, 2 nos 5A/10 A, 3 pin Modular type plug socket (Legrand) with 2nos 5A/10A Modular type switch, without plug top on 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket ( Make - Legrand ) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire

Supply & Fixing 240 V, 3 nos.16 A, 3 pin Modular type plug socket with 3 nos. 16A Modular type switch (Brand approved by EIC), 20A Modular switch type SP MCB (C-Curve) and Indicator without plug top on 12 Module GI Modular type switch board with 12 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supplying & Fixing 12" Heavy guage Aluminium conical shade of approved make including Supplying & Fixing pendent light fitting (100Watt B.C. lamp ) complete with holder incl. S&F 2x 1.5 sq. mm. copper conductor flexible cord and suspended below ceiling/beam upto 2 Mtr. length each incl. Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections

Excavation of soil for installation of Earth Electrode and filling & ramming For Soft Soil .

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level by TATA-Medium GI pipe.

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 50 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.

Supply & Fixing of 23.0 Watt LED Lamp ,make Crompton ( for Mushroom Production Unit)

Connecting the equipments body to earth busbar including S & F 25 mm x 6mm galvanised(Hot Dip)MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc./ welding properly as per direction of E.I.C.

Please Enable Macros to View BoQ information