Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.0 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED BEING LOWEST BIDDER | |
| 2 | L2₹11.5 L+₹1.5 L (15.2%)Rejected-Finance | L2 | Rejected-Finance REJECTED BEING NOT LOWEST BIDDER | |
| 3 | L3₹11.6 L+₹1.6 L (15.8%)Rejected-Finance | L3 | Rejected-Finance REJECTED BEING NOT LOWEST BIDDER | |
| 4 | L4₹11.8 L+₹1.8 L (18.0%)Rejected-Finance | L4 | Rejected-Finance REJECTED BEING NOT LOWEST BIDDER | |
| 5 | L5₹12.6 L+₹2.6 L (26.2%)Rejected-Finance | L5 | Rejected-Finance REJECTED BEING NOT LOWEST BIDDER |
Tender Value
₹15.0 L
EMD Value
₹30,000
Closing Date
24 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Khadki
Headquarters CWE Khadki, Military Engineer Services, Range Hills Road, Khadki, Pune-411003
PROVN OF FOOTPATH ALONG NANDA ROAD FROM NANDA GATE TO BHAGAT CIRCLE AND PROVN OF TOILET BLOCK NEAR JCOS MESS AT ADM BN BEG AND CENTRE UNDER GE CENTRAL KHADKI
2023_MES_620487_1
CWE/KKE/TOKEN-45 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
CWE KHADKI
PROVN OF FOOTPATH ALONG NANDA ROAD FROM NANDA GATE TO BHAGAT CIRCLE AND PROVN OF TOILET BLOCK NEAR JCOS MESS AT ADM BN BEG AND CENTRE UNDER GE CENTRAL KHADKI
6 documents required · 6 mandatory
₹500
GE CENTRAL KHADKI
₹30,000
25 Nov 2023
25 Sept 2023
27 Oct 2023
25 Sept 2023
24 Oct 2023
10 Oct 2023
27 Sept 2023 - 30 Sept 2023
Amount
Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in hard / dense soil
Excavating in trenches,n exc 1.5m wide and n exc 1.5m in depth;for foundation,etc.or for shaft,wells, cesspits, manholes, pierholes,etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out in hard/dense soil complete all as specified and directed
Returning, filling in, including spreading, levelling, waterting and wall ramming in layers not exc 25cm complete all as specified and directed
Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed
M&L for plain cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in foundation, filling & mass concrete complete all as specified and directed.
M&L for RCC (Nominal mix) Type B1(1:2:4) using 20mm graded stone aggregate as in lintel n.exc 1.5m, hold fasts, bed blocks etc complete all as specified and directed.
M & L for RCC (Nominal mix) Type B1(1:2:4) using 20mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, coping beam, band etc; basement slabs, under-reamed piles and mass
M & L for RCC (Nominal mix) Type B1(1:2:4) using 20mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M & L for RCC (Nominal mix) Type B1(1:2:4) using 20mm graded stone aggregate as in Chajjas and the like complete all as specified and directed.
M & L for RCC (Nominal mix) Type B1(1:2:4) using 20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span and the like complete all as specified and directed.
M & L for RCC (Nominal mix) Type B1(1:2:4) using 20mm graded stone aggregateas in Columns, pillars, piers, posts and struts complete all as specified and directed.
M&L for Pre-cast cement concrete block masonry with solid blocks Type C1 1:3:6 (20mm graded aggregate) , exc 10cm in width and setting in mortar, complete set in CM 1:6 complete all as specified and directed.
M&L Form work to sides of concrete as in foundations, footings, bases of column, raft and raft beams, plinth beams and similar works complete all as specified.
M&L Form work to soffits of suspended slabs such as roof slab not exceeding 200mm thick complete all as specified.
M&L Form work to soffits of chajjas including edges not exceeding 200mm thick complete all as specified.
M&L Form work to sides of columns rough finished surfaces of concrete flat, rectangular or polygonal complete all as specified.
M&L Form work to sides of roof bands / lintels bands as in RCC bands rough finishes of concrete flat complete all as specified.
M&L for Providing and fixing 30mm thick FACTORY MADE MOULDED DOOR SHUTTER - WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M.S. frame shall have a coat of steel primers. The inner panel shall consist of 25m thick EPS of Density 23 Kg / Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC sheet manufactured by an ISO-9001-2015 certified company, with 2,4,6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and / or prelam PVC sheet on other side of EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton (made by sticking 2mm rigid foam PVC sheets of 5mm (+0.25) thickness using PVC solvent cement) and stile sides 25mm (5mm x 5Nos) thick and 30mm width PVC sheet fitted along M.S tube for hardware provision & for lock 25mm thick (5mm x 5Nos). PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc complete all as sper specification & drawing and as directed by Engineer-in-Charge.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified.
S&F for MS butt hinges, medium weight, cold rolled mild steel 100mm long complete all as specified.
S&F aluminium anodised barrel tower bolts of extruded section and fixed 150mm long complete all as specified and directed.
S&F aluminium handles 150 mm, fabricated type, anodised, fixed with screws, complete all as specified.
S&F for aluminium anodised louvered ventilators of section 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. making good the jambs and painting with existing surface matching complete all as specifed and directed by Engr-in-Charge.
S&F for Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.24mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.
M & L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking. bending spirally for hooping for columns, posts, beams, foundation etc. hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M & L for mild steel TMT bars 6mm dia to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.
M & L for mild steel TMT bars 5mm dia and over upto and incl 10mm dia as in stirrups, spacers and binders,complete all as specified.
M & L for moorum filling in floors or pavings, laid in layers n exc 15cm thick, spread, levelled and rammed including watering complete all as specified and directed.
M&L for hardcore of gauge n.exc 63mm mm of broken stone / boulders, deposited , spread and levelled in layers n. exc 15 cm thick , watered and rolled /rammed to a true surface complete all as specified and directed.
M&L for 75mm thick cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base complete all as specified and directed.
M & L for non skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick cement screed in CM 1:6 complete all as specified.
M & L for glazed ceramic tiles in vertical surface 350x 250x7 mm / 450X 350X 7mm thick set and jointed in neat cemen slurry and pointed in white or colour cement to match 10mm thick backing layer in CM 1:4 complete all as specified.
M&L for 10 mm thick rendering on fair faces brick / concrete surfaces in CM 1:6 finishing even and smooth without using extra cement complete all as specified
M & L for 15mm thick rendering in CM 1:4 finishing the surfaces even and smooth without using extra cement on fair faces of brick work with using water proofing compound as per manufacturers instructions all as specified (WPC shall be measured and paid seprately)
M&L for 5mm thick rendering on concrete surface of ceiling / soffits of chajjas in CM 1:3 and rendering is to be finished even and smooth with out using extra cement.
Supply only water proofing compound all as specified and directed.
M & L for preparation of new plastered surfaces of wall and applying two coats of cement base paint all as specified and directed.
M & L for preparation of new plastered surfaces on wall and applying two coats of white wash all as specified and directed.
M & L for preparation of new plastered surfaces on ceiling and applying two coats of white wash all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C2, using 40mm graded crushed stone aggregate as in plinth protection finishing even and smooth without using extra cement.
S & F GI tubing 15mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors or concelled complete all as specified and directed.
S & F rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) triple layer 'ISI' marked, of capacity 750 litre hoisting and fixed in position on roofs including fittings complete all as specified and directed.
S&F 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S & F pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or withoutlettered Hot Or Cold With long screwed shanks and fly nuts screwed for iron pipes 15mm dia all as specified and directed.
S&F 15mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or utterfly handle,screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F for gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe 15mm bore complete all as specified and directed.
S&F for brass valves, high pressure, with ploythene float and flynut complete, screwed for iron pipe or brass ferrule 15 mm bore complete all as specified and directed.
S&F for 32mm bore waste fitting brass CP or glazed ware WHB complete all as specified and directed.
S&F for PVC conncetion 15mm size with PTMT nuts of length 450mm long complete all as specified and directed.
S&F for urinal spreader brass CP, for fixing 15mm bore pipe complete all as specified and directed.
S&F for 110mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches, floor and wall complete all as specified.
All as per item No 54 above but fixed to walls 75mm bore complete all as specified and directed.
S&F for PVC (SWR) floor trap with grating, 75mm bore outlet incl joint to waste pipe fixed in concrete type B1 (1:2:4) complete all as specified and directed.
S&F for salt glazed stone ware gully trap square or round mouthed,type 'P' size 150x150mm complete all as specified and directed.
S & F water closet (Squat Pattern) complete incl provn of lime concrete bedding Orissa pattern size 580 x 440mm white integral foot rests (excluding flush pipe or flushing cisterns) including S&F PVC P trap 110/110mm bore dia, 110mm PVC (SWR) WC connector with lip ring and connection to flushing pipe anti syphonage pipe etc complete and making good to floor complete all as specified and directed.
S&F for vitreous china bowl urinal flat back size, 465x355x265mm white including and providing and fixing plugs,bedding urinalagainst wall in cement mortar (1:2),securing urinals to plugs with and including 60 mm long brass screws,pointing around urinal back in cement;fixing automatic flushing cistern with brackets,flushing pipe, grating and union for discharge pipe (excluding of fixing supply pipe to flushing cistern,trap and waste pipe complete all as directed.
S & F viterious china wash basin white flat back size 550 x 400 mm excluding taps waste chain and plug and porcelain stopper but incl necessary brackets CP wastes and other fittings complete all as specified and directed.
S&F in repair PVC low level flushing cistern 10 ltrs capacity with float ball valve and bracket including fixing of flush pipe & 15mm dia PVC connector pipe 450mm long with two nos fly nuts complete all as specified and directed.
S&F for vitreous china urinal partition white of size 310x770mm complete all as specified and directed.
Removing excavated material exc. 250 m but n exc. 500 m and depositing where complete all as specified and directed.
M&L for hardcore of gauge exc 63mm but n.exc 100 mm of broken stone / boulders, deposited , spread and levelled in layers n. exc 15 cm thick , watered and rolled /rammed to a true surface.
M & L for 25mm thick sand filling under floors or foundations inluding watering and consolidation complete all as specified and directed.
M&L for Machine pressed precast concrete rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grad with grey cement and pigments over & including 30mm sand cushion of approved design & pattern as approved by GE, set complete all as specified.
M&L for PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in copings, benching including form work complete all as specified and directed.
M/S SANDEEP CONSTRUCTION COMPANY
M/s DEVRATAN ENTERPRISES
Vastushilpa Contrustion
DARSHAN ENTERPRISES
K.K.Enterprises
ASMEE ENGINEERING SERVICES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .