Construction, testing and successful commissioning of 70000 Gallons Capacity RCC Shell type Over Head Tank at Tulsi Bagh stagging Height 20mtrs including providing, fitting of rising main, inlet, outlet, washout and overflow arrangements. including

Amount

Boring, providing and installing bored cast-in-situ reinforced cement concrete pile of specified grade concrete mix, diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with betonies solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete including removal of excavated earth with all lifts and leads(Length of pile for payment Shall be measured from top of shoe to the bottom of pile cap 600mm dia piles.

Earth work in excavation by manual/mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 meters: All kinds of soil :

Providing/ laying of stone soling hand packed including all types of carriages.

Providing & laying in position cement concrete of specified grade including curing but excluding the cost of centering & shuttering. All work upto plinth 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing & laying in position machine batched and machine mixed design mix M-25grade cement concrete for reinforced cement concrete work, using cement content as preapproved design mix, incl. pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing & reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve Work ability without impairing strength & durability as per direction of Engineer-in charge. Note: - Cement in this item is @ 330 kg/cum. Excess or less cement used as per design mix is content considered payable or recoverable separately. All works upto plinth level

Providing and laying in position machine batched and machine mixed design mix M-25grade cement concrete for reinforced cement concrete work, using cement content as preapproved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve Work ability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately. All works above plinth level upto floor V level.

Extra for R.C.C./B.M.C./R.M.C. work above floor V level for each four floors or part thereof.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centering, shuttering, finishing and reinforcement wit 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc, and removal of form for

Foundations: footings, bases of columns etc or mass concrete.

Walls any thickness

Spiral staircases (including landing)

Arches, domes vaults up to 6m span

Extra for arches, domes ,vaults exceeding 6m span

Suspended floors, roofs, landing, beams and balconies (plan area to be measured

Extra for shuttering in circular work (20% of respective centering and shuttering items)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Hot rolled deformed bars

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angles 40x40x6mm for diagonal braces

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete.

Connecting of new OHT with existing sump and providing/fixing of inlet, outlet, overflow and wash out system in the OHT by way of providing/ fixing of flanged G.I pipes including fabricating of M.S bends, tees and other necessary fittings as per site requirement complete job.

150mm dia washout/100mm dia inlet/out let

Providing/fixing of sluice valves of Kirloskar /Vag make including necessary fittings complete job.

100mm dia

150mm dia

Providing/fixing of lightening Arestor of standard quality including earthing etc all carriages up to site of work. Complete job.

Providing /fixing of level indicator or sensor of standard make including all sorts of carriage complete.

Carriage of materials from different sources to dumping site of work by mechanical means/including loading/unloading stacking complete.

Stone aggregate for an average lead of 20km

Sand for an average lead of 20km

ZAHOOR AHMAD WANI