CA NO GE/ND-08/2023-24 REPAIR / REPLACEMENT OF E/M NATURE OF WORKS OLD / UNSERVICEABLE WIRING AND CONNECTED WORKS AT NSB-II PALAM BAGH, NOM VARUNA AND NCN DATA CENTRE UNDER GE NEW DELHI

Amount

Attending complaints for checking and replacing the existing defective electrical items for continuous electric supply including carrying out minor repair as required to make the item functional and replacing fuse, small pieces of copper wire, copper cable as of suitable size at site, insulation tape roll etc., Attending minor repair(s) such as testing, connections, fittings, nut, bolts screws etc to ceiling fan, exhaust fan (without taking down) etc, emergent complaints i.e. no light, earth leakage, short circuit, neutral break in mains/sub mains/ internal circuits of existing electrical system of main building/block and making continuous electric supply including carrying out minor repairs etc. required to make the system in order/functional with insulation tape roll, copper thimbles, glands, earthing wire as required at site complete all as specified and directed by Engineer-in-Charge. Notes :- This item is applicable only where no store is required. 1. The site for attending complaints is NSB-III Palam and NOM Varuna andf NCN Data centre. Contractor shall provide minimum one tradesmen (electrician) for each site to attend the complaint in all working days between 0830Hrs to 1700Hrs including holiday and sunday. 2. Contractor shall ensure the security passes for his staff, to be obtained from concern authority for attending complaints. 3. The contractor will ensure that the team of electricians with necessary tools bag shall always remain present at complaint cell to attend the complaints. 4. A recovery of Rs. 100/- for not attending the complaint upto 24 hours and after 24 hours Rs. 200/- per 24 hours shall be recovered from the contractor due. 5. All the complaint slip, register, tape roll,fevicol & other connected document will be provided by the contractor without any extra cost. 6.The above tradesmen shall not be utilize for the complaints where material is required and these complaint shall be measured and paid seperately as S&F here-in-after

S&F in replacement of switch piano flush type 6 Amp, SP, one way 230 volts AC all as specified.Make:-Anchor/Cona/Indoasian.

S&F in replacement of switch piano flush type 6 Amp SP two way 230 volts AC all as specified.Make:-Anchor/Cona/Indoasian.

S&F in replacement of bell push switch piano flush type 6 Amps, SP, 230 Volts AC all as specified. Make:-Anchor/Cona/Indoasian.

S&F in replacement of switch piano flush type 16 Amp, SP, one way 230 volts AC all as specified.Make:-Anchor/Cona/Indoasian.

S&F in replacement of piano flush type socket out let 5 pin 6 Amp, 230 volts AC all as specified.Make:-Anchor/Cona/Indoasian.

S&F in replacement of piano flush type socket out let 6 pin 16 Amp, 230 volts AC all as specified.Make:-Anchor/Cona/Indoasian.

S&F in replacement of piano type electronic fan regulator suitable for 1200/1400 mm ceiling fan all as specified . Make:-Anchor/Cona/Indoasian.

S&F in replacement of switch socket combination piano flush type 5 pin, 6 Amps, 230 volts AC complete all as specified and as directed.Make:-As per sample

S&F in replacement of switch socket combination piano flush type 6 pin, 16 Amps, 230 volts AC complete all as specified and as directed.Make:-As per sample

S&F in replacement of Plug Top 5 Amps, 230volts AC, 3-pin complete all as specified and as directed.

S&F in replacement of Plug Top 15 Amps, 230volts AC, 3-pin complete all as specified and as directed.

S&F in replacement of call bell suitable for 230 volts AC all as specified.Make:-As per sample.

S&F in replacement of ceiling rose 3 terminal / PVC / Polycarbonate, insulated body all as specified.

S&F in replacement of B-22 holder suitable for Led bulb upto 12 watt all as specified. Make: As per sample.

S&F in replacement of fan capacitor 1.5 Mfd all as specified make - Epcos/tibcon/universal.

S&F in replacement of fan capacitor 2.5 Mfd all as specified make - Epcos/tibcon/universal.

S&F in replacement of fan capacitor 3.15 Mfd all as specified make - Epcos/tibcon/universal.

S&F in replacement of fan capacitor 4.0 Mfd all as specified make - Epcos/tibcon/universal.

S&F in replacement of modular switch 06 A SP one way 240 volts complete all as specified and as directed.Make- As per sasmple

S&F in replacement of modular switch 16 A SP one way 240 volts complete all as specified and as directed.Make- As per sasmple

S&F in replacement of modular socket 6 A Multi socket for 2 pin and 3 pin 240 volts complete all as specified and as directed.Make- As per sasmple

S&F in replacement of modular socket outlet 16 A-2/3 pin combined 240 volts complete all as specified and as directed.Make- As per sasmple

S&F in replacement of modular Fan regulator 240 volts complete all as specified and as directed.Make- As per sasmple

S&F in replacement of modular white cover plate with frame 2 module all as specified and directed by Engr-In-Charge.Make- As per sasmple

S&F in replacement of modular white cover plate with frame 3 module all as specified and directed by Engr-In-Charge.Make- As per sasmple

S&F in replacement of modular white cover plate with frame 4 module all as specified and directed by Engr-In-Charge.Make- As per sasmple

S&F in replacement of modular white cover plate with frame 6 module all as specified and directed by Engr-In-Charge.Make- As per sasmple

S&F in replacement of modular white cover plate with frame 8 module all as specified and directed by Engr-In-Charge.

S&F in replacement of modular white cover plate with frame 12 module all as specified and directed by Engr-In-Charge.Make- As per sasmple

S&F in replacement of modular metal flush box, 2 module all as specified and directed by Engr-In-Charge.Make- As per sasmple

S&F in replacement of modular metal flush box, 3 module all as specified and directed by Engr-In-Charge.Make- As per sasmple

S&F in replacement of modular metal flush box, 4 module all as specified and directed by Engr-In-ChargeMake- As per sasmple.

S&F in replacement of modular metal flush box, 6 module all as specified and directed by Engr-In-Charge.Make- As per sasmple

S&F in replacement of modular metal flush box, 8 module all as specified and directed by Engr-In-Charge.Make- As per sasmple

S&F in replacement of modular metal flush box, 12 module all as specified and directed by Engr-In-Charge.

S&F in replacement of decorative lamninated hylum sheet 3 mm thick of size 8"x5" including necessary cutting of sheet for fixing switch/socket complete as specified and directed

S&F in replacement of decorative lamninated hylum sheet 3 mm thick of size 9"x11" including necessary cutting of sheet for fixing switch/socket complete as specified and directed

S&F in replacement of decorative lamninated hylum sheet 3 mm thick of size 9"x13" including necessary cutting of sheet for fixing switch/socket complete as specified and directed

S&F in replacement of decorative lamninated hylum sheet 3 mm thick of size 5"x5" including necessary cutting of sheet for fixing switch/socket complete as specified and directed

S&F in replacement of T-cover/rount sheet of any size as required at site complete as specified and directed

S&F in replacement of single core,FRLS cable, PVC insulated, unsheathed, multi stranded copper conductor cable of size 1.5 Sqmm all as specified.Make:RR/POLYCAB/HAVELLS

S&F in replacement of single core,FRLS cable, PVC insulated, unsheathed, multi stranded copper conductor cable of size 2.5 Sqmm all as specified.Make:RR/POLYCAB/HAVELLS

S&F in replacement of single core, FRLS cable, PVC insulated, unsheathed, multi stranded copper conductor cable of size 4 Sqmm complete all as specified and as directed.Make:RR/POLYCAB/HAVELLS

S&F in replacement of single core, FRLS cable, PVC insulated, unsheathed, multi stranded copper conductor cable of size 6 Sqmm complete all as specified and as directed.Make:RR/POLYCAB/HAVELLS

S&F in replacement of single core, FRLS cable, PVC insulated, unsheathed, multi stranded copper conductor cable of size 10 Sqmm complete all as specified and as directed.Make:RR/POLYCAB/HAVELLS

S&F in replacement of two core cable, PVC insulated, unsheathed, multi stranded copper conductor cable of size 1 Sqmm complete all as specified and as directed.Make:RR/POLYCAB/HAVELLS

S&F in replacement of three core cable, PVC insulated, unsheathed, multi stranded copper conductor cable of size 2.5 Sqmm complete all as specified and as directed.Make:RR/POLYCAB/HAVELLS

S&F in replacement of MCB SP 06 to 32 Amps 240 Volts, 10 KA, `C' curve, all as per site requirement and as directed by Engr-in-Charge.(Make : Legrand/Havells/indoasian)

S&F in replacement of MCB SP 40-63 Amp, 10kA breaking capacity, Series 'C' complete all as specified and as directed.Make : Legrand/Havells/indoasian

S&F in replacement of MCB SPN 16-32 Amps, 240 Volts, 10 KA, `C' curve, all as per site requirement and as directed by Engr-in-Charge.(Make : Legrand/Havells/indoasian)

S&F in replacement of MCB SPN 40 Amps, 240 Volts, 10 KA, `C' curve, all as per site requirement and as directed by Engr-in-Charge.(Make : Legrand/Havells/indoasian)

S&F in replacement of MCB SPN 63 Amps, 240 Volts, 10 KA, `C' curve, all as per site requirement and as directed by Engr-in-Charge.(Make : Legrand/Havells/indoasian)

S&F in replacement of MCB TP 40 Amps 415 volts, 'C' Series 10 KA as per site requirement and as directed of approved make. (Make : Legrand/Havells/indoasian)

S&F in replacement of MCB TPN 40 Amps 415 volts, 'C' Series 10 KA as per site requirement and as directed of approved make. (Make : Legrand/Havells/indoasian)

S&F in replacement of MCB TPN/ Isolator 4P from 63 Amps 415 volts, 'C' Series 16 KA as per site requirement and as directed of approved make. (Make : Legrand/Havells/indoasian)

S&F in replacement of MCB TPN/ Isolator 4P from 100 Amps 415 volts, 'C' Series 25 KA as per site requirement and as directed of approved make. (Make : Legrand/Havells/indoasian)

S&F in replacement of MCCB 63 Amp, 4 pole, 415 Volts,16kA fixed type complete all as specified.MAKE:-Legrand/L&T/Havells

S&F in replacement of MCCB 250 Amp, 4 pole,415 Volts ,36kA fixed type complete all as specified.MAKE:-Legrand/L&T/Havells

S&F in replacement of MCCB 125 Amp,4 pole, 415 Volts, 16kA adjustable type complete all as specified.MAKE:-Legrand/L&T/Havells

S&F in replacement of MCCB 160 Amp, 4 pole,415 Volts, 36kA adjustable type complete all as specified.MAKE:-Legrand/L&T/Havells

S&F in replacement of LED Integrated Batten T5 10 watt - 2FT White, indoor decorative polycarbonate extruded T5 LED battern --integrated type environmental friendly complete all as specified and directed. Make :- Crompton/Philips/Havells.

S&F in replacement of LED Batten T-5 fitting 20 watt LED White, indoor decorative aluminum extruded T5 LED battern -integrated type environmental friendly complete all as specified and directed.Make :- Crompton/Philips/Havells.

S&F in replacement of LED Batten T-5 fitting 18/20/22 watt LED warm White, indoor decorative aluminum extruded T5 LED battern -integrated type environmental friendly complete all as specified and directed.Make :- Crompton/Philips/Havells.

S&F in replacement of aesthetically designed ceiling/surface circular shaped decorative green perform sleek LED downlighter of 06 W fixture with opal diffuser to give glare free light including suitable LED lamp complete all as specified and as directed.Model :-Make_Philips/Crompton/Havells.

S&F in replacement of aesthetically designed ceiling/surface circular shaped decorative LED downlighter Warm white of 06 W fixture with opal diffuser to give glare free light including suitable LED lamp complete all as specified and as directed.Makel :- Philips/Crompton/Havells.

S&F in replacement of aesthetically designed ceiling/surface circular shaped decorative ceiling LED light of 03 W (As per sample) fixture with opal diffuser to give glare free light including suitable LED lamp complete all as specified and as directed.Make :- Crompton/Philips/Havells.

S&F in replacement of aesthetically designed ceiling/surface circular shaped decorative LED downlighter Warm white of 03 W fixture with opal diffuser to give glare free light including suitable LED lamp complete all as specified and as directed.Makel :- Philips/Crompton/Havells.

S&F in replacement of aesthetically designed ceiling/surface circular shaped decorative green perform sleek LED downlighter of 15 W fixture with opal diffuser to give glare free light including suitable LED lamp complete all as specified and as directed.Model :-Philips/Crompton/Havells.

S&F in replacement of aesthetically designed ceiling/surface circular shaped decorative LED downlighter of 18 W PDC housing for enhanced life and continuous operation complete all as specified and as directed.Model Philips/Crompton/Havells.

S&F in replacement of aesthetically designed ceiling/surface circular shaped decorative Summit LED downlighter of 25 W fixture with high quality diffuser for uniform light effect including suitable LED lamp complete all as specified and as directed.Model :-581898 of Philips or equivalent model in Crompton/Havells.

S&F in replacement of aesthetically designed stylo decorative single head LED wall light of 10 W,50HZ fixture with opal diffuser to give glare free light including suitable LED lamp of 10 W having Lamp base B22d complete all as specified and as directed.Model-34302 of Philips or equivalent model in CG/Havells.

S&F in replacement of aesthetically designed trendo decorative double head LED wall light of 10 W,50HZ fixture with opal diffuser to give glare free light including suitable LED lamp of 10 W having Lamp base B22d complete all as specified and as directed.Model-34304 of Philips or equivalent in CG/Havells.

S&F in replacement of aesthetically designed Platina decorative single head LED wall light of 10 W,50HZ fixture with expressive and eligent form light including suitable LED lamp of 10 W having Lamp base E27 complete all as specified and as directed.Model-58184 of Philips or equivalent model in CG/Havells.

S&F in replacement of aesthetically designed Platina decorative double head LED wall light of 10 W,50HZ , fixture with expressive and eligent form light including suitable LED lamp of 10 W having Lamp base E27 complete all as specified and as directed.Model-58185 of Philips or equivalent model in CG/Havells.

S&F in replacement of aesthetically designed decorative double head warm white LED wall light of 10 W ( As per sample) fixture with expressive and eligent form light including suitable LED lamp of 10 W having Lamp base E27 complete all as specified and as directed.Make:- Philips/CG/Havells.

S&F in replacement of aesthetically designed Roseate Wall Light Single LED wall light of 20 W,50HZ fixture with opal diffuser to give glare free light including suitable LED having Lamp base E27 complete all as specified and as directed.Model-58135 of Philips or equivalent model in CG/Havells.

S&F in replacement of aesthetically designed Roseate Table lamp LED light of 20 W,50HZ fixture with opal diffuser to give glare free light including suitable LED lamp having Lamp base E27 complete all as specified and as directed.Model-58139 of Philips or equivalent model in CG/Havells.

S&F in replacement of aesthetically designed muziris decorative warm white LED pictur light of 07 W CCT-3000K fixture with bronze finish for superior feel including suitable LED lamp of 07 W having LED Lamp base complete all as specified and as directed.Model-31402 of Philips or equivalent model in CG/Havells.

S&F in replacement of aesthetically designed Wall mounted decorative mirror LED light of 3.6 W (As per sample) fixture with opal diffuser to give glare free light including suitable LED lamp of 3.6 W having Lamp base E27 complete all as specified and as directed.Make :- Crompton/Philips/Havells.

S&F in replacement of aesthetically designed sleek surface downlighter LED light of 12 W fixture with opal diffuser to give glare free light including suitable LED lamp complete all as specified and as directed.Model-SM251C LED20S-6500 PSU WW of Philips or equivalent model in crompton/Havells.

S&F in replacement of aesthetically designed wall mounted oriel decorative warm white mood light of 06 W fixture with opal diffuser to give glare free light including suitable LED lamp complete all as specified and as directed.Model :- 34141 of Philips or equivalent model in crompton/Havells.

S&F in replacement of cast aluminium housing, LED bulkheads light fitting 10 watts with frosted diffuser complete with suitable driver complete all as specified and as directed.Crompton/Philips/Havells

S&F in replacement of aesthetically designed Pendant chrome suspension light 42 watt (Jhumar) of metallic black colour of premium glass crystal for sparkling light effect material to create anatmosphere of elegance,formality and detail suitable With suitable LEDs complete all as specified and as directed.Make :-30899 of Philips or equivalent model in wipro /Havells.

S&F in replacement Recessed mounting 36 Watt 2'x2' full glow essential LED panel fitting luminaire with high transmitive diffuser suitable for indoor space and fix in existing POP including cutting/grouting of existing POP and get electrically connected the fitting with switch board for suitable size of PVC copper wire complete all as specified and directed. Make Philips /crompton/Havells/wipro.

S&F in replacement of 1x4 fullglow recess mounted LED panel light of 36 W luminaire with high transmitive diffuser suitable for indoor space complete all as specified and as directed. Make Philips / CG/Havells/wipro.

S&F in replacement of LED inverter bulb 10 watt complete all as specified and as directed.

S&F in replacement of LED bulb 09 watt complete all as specified and as directed.

S&F in replacement of LED bulb warm white 09 watt complete all as specified and as directed.

S&F in replacement of LED bulb 2.8/03 watt pin/holder type complete all as specified and as directed.

S&F in replacement of LED bulb warm white 2.8/03 watt pin/holder type complete all as specified and as directed.

S&F in replacement Recessed mounting 30 Watt 2'x2' LED panel fitting suitable for grid ceiling with 100% indirect lighting,delivering soft and uniform light for excellent visual comfort fix in existing POP including cutting/grouting of existing POP and get electrically connected the fitting with switch board for suitable size of PVC copper wire complete all as specified and directed. cat part No RC 420B M LED 30S 6500 PSU WH Make Philips or equivalent model in crompton/Havells/wipro.

S&F in replacement of linear bright warm white flexible and customiseable cove light strip 28 watt with driver complete all as specified and as directed.

S&F in replacement of Building security/ street light fitting 25 watt to be fitted at the pheripheral surfaces of the building including GI bracket of suitable size,fixing with clamp and other connected accessories complete all as specified and as directedCrompton/Philips/Havells.

S&F in replacement of decorative LED type post top lanterns luminaire 40 watts, outdoor type for 360 degree indirect light with resistant to corrosion, glare free having better uniformity with suitable driver complete with required size/length pipe for fixing the fitting and coping of the pipe for fixing the pipe in ground all as specified and as directed.CAt Part No LPTO-40-CDL-M of crompton or equivalent model in Philips/Havells

S&F in replacement of Jargeau - Post Top LED Light luminaire 20 watts, outdoor type for 360 degree indirect light aluminium dicast housing having IP-65/IK08 protection alongwith fixing arrangement complete all as specified and as directed.CAt Part No 9405 of Philips or equivalent model in Crompton/Havells

S&F in replacement of LED bollard luminaire 10 watts, inverted pyramid tripod type with soft 360 degree light outdoor type having resistant to corrosion with better optics for uniform distribution complete with suitable driver & fixing nuts, bolts & washers all as specified and directed.CAt Part No LBLSN-10-CDL of crompton or equivalent model in Philips/Havells

S&F in replacement of LED flood light luminaires 90 watts, 230 volts AC, outdoor type with pressure diecast housing resistant to impact and corrosion, glare free complete with lamp, driver complete all as specified and as directed.

S&F in replacement of LED flood light luminaires 40 watts, 230 volts AC, outdoor type with pressure diecast housing resistant to impact and corrosion, glare free complete with lamp, driver complete all as specified and as directed.

S&F in replacement of LED driver suitable for 40 watt post top lantern fitting 40 watt LED lamp complete all as specified and as directed.(As per sample)

S&F in replacement of LED driver suitable for 10 watt bollard LED light complete all as specified and as directed.(As per sample)

S&F in replacement of LED driver suitable for 36 watt 2'X2' LED panel light complete all as specified and as directed.(As per sample)

S&F in replacement of LED driver suitable for 3-25 watts LED light any type complete all as specified and as directed.(As per sample)

S&F in replacement of LED driver suitable upto 90 watts flood LED light complete all as specified and as directed.(As per sample)

Taking down of old unserviceable ceiling fan/exhaust fan dismantling of blades, transportation to work shop and carrying out rewinding, transportation to site, reinstallation and testing Complete all as specified and directed by Engineer-in-charge. Note : Rewinding will be measured and paid separately under this Schedule.

M&L for Rewinding of ceiling fan 1200 mm sweep by dismantling of fan motor cutting and removing of burnt windings, cleaning, winding with supper enameled copper wire of superior quality, same gauge of wire, same Nos of turns, provn of insulation paper applying of varnish drying of varnish and assembling of fan including replacement gun metal bush where ever required Complete all as specified and directed by Engineer-in-charge. Note : The lathe machine work if necessary to making uppper/lower sheet of fan will be measured under this item only.

All as per ser item No 86 but 1400 mm sweep

All as per ser item No 86 but exhaust fan 230/300 mm sweep

All as per ser item No 86 but exhaust fan 450/600 mm sweep

S&F in replacement of ceiling fan Ball bearing of suitable size & model.

S&F in replacement of 'U' clamps with rubber reel, bolts, nuts, washers and safety pin ceiling fan of any size/ make

S&F in replacement of Down rod of any height fabricated out of MS pipe 12mm dia heavy duty duly painted with one coat of white paint complete.

S&F in replacement of Canopy of Celing fans of 1200/1400mm swipe size heavy duty duly painted with one coat of white paint complete.

S&F in replacement of blade (Set of 3 blades) of Celing fans of 1200/1400mm swipe size heavy duty duly painted with one coat of white paint complete.(As per sample)

S&F in replacement of blade of exhaust fans of 450/600 mm swipe size heavy duty duly painted with one coat of paint of suitable colour complete.(As per sample)

S&F in replacement of metal frame of exhaust fans of 450/600 mm swipe size heavy duty duly painted with one coat of paint of suitable colour complete.(As per sample)

S&F in replacement of motor of exhaust/fresh air fans of 230mm swipe size heavy duty duly painted with one coat of paint of suitable colour complete.(As per sample)

S&F in replacement of motor of exhaust fans of 300mm swipe size heavy duty duly painted with one coat of paint of suitable colour complete.(As per sample)

S&F in replacement of motor of exhaust fans of 450mm swipe size heavy duty duly painted with one coat of paint of suitable colour complete.(As per sample)

Supply only in replacement MS fastner bolt 8mm dia and 100mm long (Min.) for fixing Exhaust fan/Bldg security light etc with nut and washer.

M&L for spray painting two coat (white colour) with synthetic enamel paint to Ceiling fans/Exahust fan of any capacity to reach upto satisfied finish of painting after cleaning and preparation of surface complete all as specified and directed by Engineer-in-charge.

Taking down geyser 25ltrs capacity of any make, opening up complete for inspection descalling by chemical treatment of internal tank , themrostate pipe, base plate assembly carrying out minor repairs including replacement of gaskets testing and refixing in position including making electrical and water connection complete all as specified and directed by Engineer-in-Charge.

M&L for spray painting two coat (white colour) with synthetic enamel paint to Geysers 25 Liters capacity to reach upto satisfied finish of painting after cleaning and preparation of surface complete all as specified and directed by Engineer-in-charge.

S&F in replacement heating element 1.5 KW (triangular/circular) as required at site as per sample for any make of geyser including rubber washers complete all as specified and directed. Make Micronking/Theeta/Standard

S&F in replacement heating element Bajaj type 1.5 KW (circular/square/triangular) as required at site as per sample for any make of geyser including rubber washers complete all as specified and directed. Make Micronking/Theeta/Standard

S&F in replacement heating element 2.0 KW (triangular/circular) as required at site as per sample for any make of geyser including rubber washers complete all as specified and directed. Make Micronking/Theeta/Standard

S&F in replacement heating element Bajaj type 2.0 KW (circular/square/triangular) as required at site as per sample for any make of geyser including rubber washers complete all as specified and directed. Make Micronking/Theeta/Standard

S&F in replacement 25 Ltr inner stainless steel tank suitable for 25 Ltr storage water heater complete all as specified and directed.

S&F in replacement of insulating material (Glass wool) for 25/50 litre capacity Geysers all as directed by Engineer -in - charge.

S&F in replacement of base plate assembly (As per sample) as required at site 20 SWG heavy duty suitable for 25 litre capacity stainless steel tank geyser with inlet, outlet and thermostat pipe with drain plug and screw for fixing the assembly including clamps for holding the assembly with nuts, bolts,packing and safety valves suitable for all type of geysers installed at site.

S&F in replacement of chromium plated connection pipe 600mm long with two brass adopters washers and connecting up complete all as specified and directed.

S&F in replacement of PVC connection pipe 600mm long with two brass adopters washers and connecting up complete ISI mark all as specified and directed by Engr-in Charge

S&F in replacement of safety nut for high pressure release (As per sample).

S&F in replacement of non return valves 15mm dia and connecting up complete (ISI marked).as per sample

S&F in replacement of Top & Bottom cover body suitable for 25 Ltrs storage water storage heater made of MS sheet complete as per site requirement all as specified & directed by Engineer-in-Charge.

S&F in replacement of outer body for geyser made out of MS sheet suitable for 25 ltrs capacity geyser vertical/horigontal type all as specified and directed.

S&F in replacement of thermostat (As per sample) as required at site for 25 Liters capacity Geyserof any make/model.

S&F in replacement of thermostat Bajaj type (As per sample) as required at site for 25 Liters capacity Geyserof any make/model.

S&F in replacement of indicator lamp (Red & Green) 230 volts suitable for Geyser (as per sample)

S&F in replacement of of mild steel hole fastner 10mm dia, 100mm long including nut and washer.

S&F in replacement of metal clad plug top 20 Amp, 230 volts AC all as specified.MAKE:-Legrand/L&T/Havells

S&F in replacement of metal clad socket outlet 20 Amps, 230 volts AC all as specified.MAKE:-Legrand/L&T/Havells

Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc.

M&L for point wiring complete, stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable in but with through existing concealed PVC/ MS conduit and including replacement of unserviceable pressed steel terminal boxes of required size with top cover 3 mm thick plastic/laminated sheet of required color with screwed and cup washer with all accessories including 1.5 sqmm stranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly complete all as specified for One light/Fan/Bell point controlled by one switch 5 Amps one way using cable (1.5 Sq mm for phase and neutral and 1.5 sqmm for earthing) and making good to disturbed surface of walls including necessary touch up with adjoining surface of disturbed area i.e with OBD/colour work/white wash as existing finishes complete all as specified and directed by Engr-in-Charge. Note :- In existing conduit wiring new conduit will be added where there is a burnt/blokage/damage to the existing conduit including bends/elbows/tees/Junction boxes.

(a) One light / fan/bell point controlled by one switch SP, one way, 230 volts.

(b) One 3 pin socket outlet 5/6 Amps on same board.

(c) One socket outlet 5/6 Amps on independent board.

(d) One power socket 15/16 Amp but with cable 2.5 Sqmm for phase & neutral and for earth 2.5 sqmm.

S&F in replacement of PVC Casing Caping of size 1" complete all as specified & directed.

S&F in replacement of PVC conduit 20mm dia, rigid, complete all as specified & directed.

S&F in replacement of flexible PVC pipe of 20mm dia rigid complete all as specified & directed.

S&F in replacement of submain wiring with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type, 1100 volts grade 2 x 4 sqmm complete drawn in existing conduit along with 1x 4 sqmm PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type for continuous earth wire and connected to common earth dolly complete all as specified.Make:-RR/Havells/Polycab Note :- New conduit of suitable size with connected fitting will be laid if there is a burnt/blokage/damage to the existing conduit including bends/elbows/tees/Junction boxes including making good to disturbed surface finished with the adjoining surface of disturbed area and the rates are inclusive of quoted rates.

S&F in replacement of submain wiring with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type, 1100 volts grade 2 x 6 sqmm complete drawn in existing conduit along with 1x 6 sqmm PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type for continuous earth wire and connected to common earth dolly complete all as specified.Make:-RR/Havells/Polycab Note :- New conduit of suitable size with connected fitting will be laid if there is a burnt/blokage/damage to the existing conduit including bends/elbows/tees/Junction boxes including making good to disturbed surface finished with the adjoining surface of disturbed area and the rates are inclusive of quoted rates.

S&F in replacement of submain wiring with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type, 1100 volts grade 2 x 10 sqmm complete drawn in existing conduit along with 1x 10 sqmm PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type for continuous earth wire and connected to common earth dolly complete all as specified.Make:-RR/Havells/Polycab Note :- New conduit of suitable size with connected fitting will be laid if there is a burnt/blokage/damage to the existing conduit including bends/elbows/tees/Junction boxes including making good to disturbed surface finished with the adjoining surface of disturbed area and the rates are inclusive of quoted rates.

S&F in replacement of metal clad enclosure with plug and socket 20 Amp with one MCB SP upto 20 Amps 230 volts AC all as specified.Make:-Havells/indoasian/legrand

S&F in replacement of factory made concealed sheet steel distribution boards, double door, SPN, 4 way, 230 volts AC, IP 43 with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing all as specified.Make:-Havells/indoasian/legrand

S&F in replacement of factory made concealed sheet steel distribution boards, double door, SPN, 8 way, 230 volts AC, IP 43 with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing all as specified.Make:-Havells/indoasian/legrand

S&F in replacement of factory made concealed sheet steel distribution boards, double door, SPN, 12 way, 230 volts AC, IP 43 with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing all as specified.Make:-Havells/indoasian/legrand

S&F in replacement of factory made load line DB's double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 4 way VTPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link suitable for MCCB TP as incomer & MCB SP/TP as out going complete all as specified.Make:-Havells/indoasian/legrand

S&F in replacement of factory made load line DB's double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 8 way VTPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link suitable for MCCB TP as incomer & MCB SP/TP as out going complete all as specified.Make:-Havells/indoasian/legrand

S&F in replacement of Exhaust fan Louvers 230/300 mm Size, including taking out old louvers up to fourth floor complete all as specified. Note:-ladder arrangement for fixing louvers will be made by contractor.

M& L for servicing,cleaning,oiling, greasing including replacement of necessary defective spares parts of air curtains and repair of motor/compressor/blower of air curtains complete all as specified and directed by Engr-In-Charge.

S&F in replacement of MCB TP 63 Amps 415 volts, 'C' Series 10 KA as per site requirement and as directed of approved make. (Make : Legrand/Havells/indoasian)

M&L for Earthing complete with galvanized steel earth plate 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate n.less than 1.5 m below normal ground level, connected to galvanized iron wire 4 mm as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints as shown in drgs and including excavation and earth work, GI pipe light grade 25mm bore of protection of GI wire from earth electrode, supply and laying charcoal dust, common salt, PCC (1:2:4) type B-1 Chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type B-1using 20 mm graded stone aggregate Reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia , PGI funnel and wire mesh , 20 mm dia GI Pipe light grade for watering complete all as shown in drg and connected to earth test point including testing as directed by Engr-in-Charge.

RAJDHANI ENTERPRISES

RUCHIKA ENGG.WORKS

ASHUTOSH BUILDERS

POONAM ENTERPRISES

M/s Adhikari construction co.

SANJEEV ENTERPRISES