Construction of New Three Stage Rajagopuram at Arulmigu Kulandhai Vellappar Temple, Poombarai, Kodaikanal (Tk)

Amount

Scaffolding charges for Vimanans and gopurams with casurina posts coconut or plam trees wherever necessary for main, form work and providing with coconut keeth coverings, providing ladder arrangements, country wood pland for working, inspection etc, complete hire charges only for erection, maintenance and removing the same on completion of the work 1 sq,ft. Proposed Rajgopuram Upto 25'0"

Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Random rubble masonry in Cement mortar 1:4 using hard broken rough stones and bond stones in each layers etc., rate inclusive of cost and conveyance of all materials and labour charges etc., complete

Installation of Vertical Bored cast in situ RCC piles of 450mm dia. in all types of soils, using Ready Mix Concrete of M20 grade, with sulphate resistant Cement, fine aggregate, 20mm and down graded HBGS jelly coarse aggregate. The rate includes cost of reinforcing steel, binding wire, fabrication, welding charges, placing of reinforcement cage in bore hole in correct position, cost of boring to the required depth with Bentonite solution with temprory casing of required length, conveyance of RMC to site and pouring concrete using Tremine pipes, conveyance of all materials to the site including all tools and plants, shifting the plants and equipments from one point to another, excavation of mud pits for circulation of Bentonite solution, closing the mud pits to original level and mud removal with initial lead and lift but including dismantling the concrete above the cut off level etc complete as directed by the departmental officers including socketing. The reinforcement cage should be welded properly for lifting. The concrete cubes to be tested as per IS 456-2000. Acceptance criteria by clause 16.1. Frequency of testing should be as per clause 15.2.2. The length of pile for payment shall be measured up to natural ground level. The work should be carried out as per IS 2911. Pile depth should be decided by the departmental office at site.

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specification. (Payment for centering shall be given after the concrete is laid) Foundation & Basement

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specification. (Payment for centering shall be given after the concrete is laid) Super Structure

Providing and laying in position, Standardised Concrete Mix M-20 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/mᶾ and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials). for foundation

for Super structure

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Supply of cut stone for carrying out Garpagraham, Arthamandapam, Maha Mandapam, Thirumathil and other Temple Structures upto 10 feet length Upto 10Feet Stone

Above 10 Feet Stone

Labour charges for stone excluding cost and conveyance of stone from quarry but including all labour charges for tools and plants for dressing charcoal scaffolding charges handling charges hoisting and fixing in position etc complete., Chitravanam

Upa Beadam jagathi

Upa Beadam Kumuthagam

Upa Beadam Kandam

Upa Beadam Kabodhagam

Athisatanam Padma jagathi

Athisatanam jagathi

Athisatanam Kumuthagam

Athisatanam Kandam pattiyal

Ashwabatham,Sthambam/Vethigai

Kalvari,Sthambam

Thaadi,Kalasam

Palagai kudam

Bothigai Veerakandam

Uthiram

Kabodhagam

Vyalavari

Pavukkal

Nilaikal - Top

Kudavarai

Supplying and Fixing cutstone flooring using cut stone 600x600 and not less than 100mm thick top Single line dressed & Pointing with cement mortar 1:3 (One cement and Three sand) etc including all cost and conveyance of materials to site and labour charges for paving as per standard specification ans as directed complete

Special plastering for R.C.C. slab beam and sunshades with cement mortar 1:3, 10mm thick including cost and conveyance of all materials, labour for work, and all incidential charges such as scaffolding, finishing and curing as directed by the departmental officers etc., complete complying with the standard specification.

Providing granolithic floor finish 25 mm thickness of the following thickness with plain cement concrete 1:2:4 (One Cement, Two sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

Brick masonry lime Mortar 1:2 using Stock bricks including all varivargams, moulds, sthambams, mukapathrams, koodu, nasi and all ornamental brick work complete, all pancharams, agarais, karnakoodus, etc., forming core walls of Rajagopuram/ Vimanams complete including cost and conveyance of all materials including cement, all the labour charges including marking pathies shaping of the bricks, lifting of all the materials to required heights, curing and all extra for working in heights etc., complete 100 cft for vimanam / gopuram

Providing Vargapoochu over the corewalls of Vimanams / Gopurams, with Cement Mortar1:4 complete including shaping the mukhapathram, mahanasi, Koodu all ornamentals works to proper shape by embedding broken bricks of shaped/chiseled bricks, rough-plastering with Cement Mortar1:4and finishing with final ornamental plastering and nayam theervani including cost and conveyance of all materials, labour therefore, lifting of materials, all working in heights, curing with water etc, complete including all extra for folding and including clearing from the vimanams/gopurams 100sft superficial area. for kalkaram Rajagopuram Outer Upto 25' height

Painting with multicolour (Panchavarnam) good enamal paints complete for the Vinamans/ Gopurams, inculding cost and conveyence of all materials, lobour charges inculding Artist painter, working in heights, lifting of material, cost of brushes etc, complete-which including all extra for foldings-100sft, superficial area. (b) Vimanam / gopuram of ht. Up to 25' excluding Kalkaram

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Painting two coats with approved ready mixed water based emulsion paint with one coat of primer over the cement plastered wall surface ceiling and other new surface including clearing preparing the surface curing in all floors including brushes etc., complete.

Providing new sudhai vigrahams in the vimanams and Rajagopurams with copper rod reinforcement of suitable dia with binding wires wherever necessary, shaping the core with broken bricks set in Lime Mortor1:1:5finishing the same with Lime Mortor1:1:5 bringing to the correct shape (Lakshana) in conformift with silpa sastra inclusive of special ornaments, wiapons, peedam etc., complete and providing L.M. Nayam theervai wherever necessary. inclusive of cost and conveyance of all materials, such as cement broken bricks, and G.I. rods.binding wire all labour for working in heights, curing lifiting of materials etc., complete including Panchavarnam 2 coats over a primary coat (one vigraham is accountable with one head, 4 hands with weapons, ornamental costumes etc., as per prathima lakshans, Vigraham height is measurable from the crown top to the bottom of foot only If peetam is provided the rate with peetam may be adopted as datailed hereunder) The lime used should be sourced from Pollachi which is highly iron fortified and suitable for structural and masonry works. Sudhai size above 1' 6" upto 2' 6"

Sudhai size above 2' 6" upto 3' 6"

Sudhai size above 3' 6" upto 4' 6"

Sudhai size above 4' 6" upto 5' 6"

Supplying & fixing Teak wood temple type door including all materials, labour charges for manufacturing and fixing in position including all furniture fittings etc complete with std. Specifications

Best varnish two coats for wood works etc, complete complying with standard specifications.

Supplying and fixing of Brass grills using 80mm dia 3mm thick brass pipe for outer vertical and horizontal members,50mm dia dia 3mm thick brass pipes for intermediate horizontal members,25mm rod vertical member including cost of all materials,labour charges for cutting,tig welding, nik phosphor bronze filler rod,polishing and finishing etc,including all cost conveyance etc,complete.The specimen of brass pipe to be used should be got approved by this department officials for its qualitity and chemical compositions,before use in work. The brass pipe to be should be bright gold appearance with golden yellow colour and good quality and having corrosion resistant. a)Polishing - DU PONT Chroma Clear Coating, b)Welding - Tungsten Inert Gas (T I G), c) Copper 67% and Zinc 33% plus or minus 2%

Supplying and fixing of brass bowel including cost of materials ,labour charges,transportation and all conveyance charges etc,complete. (The brass bowel should be got approved by the Executive Engineer before use on works.)

Supplying and fixing of various size for Copper kalasam ,various size for Karunkaali wood and teak wood in kalasam post including lacquer polish for including cost of materials ,labour charges,transportation and all conveyance charges etc,complete. (The copper kalasam, karunkali, teak wood, lacquer polish should be got approved by the Executive Engineer before use on works.)

Electrical : Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed FRLS Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable colour for PVC concealed light point / fan point (For electronic regulator) (5 points per coil)

Supply and fixing of 18W LED Square type Surface fitting with LED (Higher End) on Ceiling/Wall with PVC unsheathed copper leads from terminals to the fitting.

Supply and fixing of 150W LED High bay light fitting in suitable angle iron frame work on wall/ Pillar with 32mm dia. GI pipe (class B) with 32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting.

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 2 nos 6A-32A TP MCB, 6 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End

Supply and clarnping of 3 1/2 x 25 sq.mm PVC LTUG alu. armoured cable on post or on wall with MS clamps.

Supply and fixing of brass cable gland for 3-1/2 x 25 sq.mm. PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 3-1/2 x 25 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and installation of Super conductor lightning Diverter with following specifications. Type: Single Stage/serial No:JR-SC1/d2 Designation: Silver code super conductor lightning diverter with golden tipeed receiver, Diffuser, H.T Divider with discharging diverter. PATENT by the Government of India, Patent No:385801, Certified by: CPRI (Positive & Negative current impulse shots 8/20 US wave as per IEC 60099-4 with magnitude of 40KA+- 10%) Approved by the government of Tamilnadu PWD Assessment committee.

Supply and fixing of 22K.V - H.T Insulator in international standard including materials.

Supply and run of copper wire 6mm SWG for open air network system.

Supply and fixing of G.I Centre sturdy pole with holding brackets.

Supply and fixing of Porcelain wall insulator with PVC Pipe, clamps & screw etc.

Supply and fixing of 11KV Porcelain insulator with spike and holders, for open air- network system. With holding brackets.

Supply and digging (Earth cell) and providing earth chemicals, earth discharging units with copper base plate.

Transportation charges.

Sub Total

POUN DEVELOPERS (BID ID -1278812)