REPAIR/ RESURFACING OF CERTAIN ROADS AT KHUNMOH, KHREUH AND SHER-E-SHALI GRN UNDER GE 861 EWS

Amount

M&L for repair to potholes, area not exceeding 1.0 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc. cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming and applying a tack coat with bituminous primer @ 5 Kg per 10 Sqm of paving bitumen of Grade VG-10, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm, binded with 0.09 Cum of stone chippings 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exceeding 30mm, complete all as specified and as directed.

M&L for preparation of existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags or mechanical air compressor to remove all loose dirt etc, complete all as specified and as directed.

M&L for applying evenly a priming/ tack coat with bituminous primer @ 5 KG/ 10 Sqm of paving bitumen of Grade VG-10, complete all as specified and directed.

M&L for bituminous premix asphaltic semi dense concrete (SDAC) 30mm thick (consolidated thickness) with 5.5% binder content of paving bitumen of Grade VG-30 by weight of total mix, rolled and compacted to required camber and gradient with using 8 to 12 tonne power roller and laying with mechanical paver, complete all as specified and directed. Notes :- (a) Bituminous premix semi dense asphaltic concrete shall be prepared in central computerised hot mix plant. (b) Design mix shall be got done by the contractor at his own expenses from NABL laboratory as decided by GE. (c) Contractor shall quote his rates by considereing binder contents @ 5.5% of total mix by weight, however in case of any variation in weight of binder contents on lower side as per actual mix design, the same shall be ajusted @ Rs. 60.00 Per Kg of bitumen.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exceeding 400 Sqm and thickness or depth not exceeding 50mm and removing thereof as accounted under credit, complete all as specified and as directed.

M&L for Premixed Bituminuous Macadam using 4% binder content of paving bitumen of Grade VG-30 by weight of total mix (consolidated thickness 75mm or less), laid with using mechanical paver and compacted to required gradient and camber, complete all as specified and directed. Notes :- (a) Premixed Bituminuous Macadam shall be laid using self propelled hydrostatic paver finisher and preparation of mix shall be using hot mix plant and transporting the mix in tipper. (b) The exact bitumen content required shall be determined follwing the Mix Design procedure contained in the Asphalt Institute Manual MS-2 (Sixth Edition) as referred in case 3.5.3 of IRC 111:2009. The adjustment in rate due to variation in quantity of bitumen if any shall be priced at the rate of Rs. 60.00 Per KG of bitumen.

M&L for preparation of new/ old surfaces, removing dust, dirt, grease and other foreign matters etc. to receive the marking and applying hot thermoplastic road marking paint of approved colour (white or golden yellow) including type-I reflectorising glass beads as per table 800-3 & 800-4 of MORTH specifications with fourth revision of 2001/ latest edition, applied in uniform thickness of atleast 2.0mm and 10cm wide and spread uniformly with reflectorising glass bead type-II @ 250 Gram per Sqm with a road machine as per IRC 35 with traffic diversion arrangements, if required, complete all as specified and directed.

S&F in replacement cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972, fixed with and including MS stud of suitable size as per manufacturer's instructions, complete all as specified and directed.

S&F in replacement metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50mm dia mild steel pipe of 600mm height duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector radium tape of 25mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B-1, complete all as specified and directed.

S&F in replacement solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufacturer's instructions and directed.

Manufacturing, supplying and fixing retro reflective Mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours). Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete all as specified and directed.

Supply only mild steel flexible barricate (foldable/ expandable) made up of square pipe 60x60mm with thickness 3mm and rectangular pipe of size 40x10mm with 1.6mm thickness, stand of size not less than 5 feet (height) x 8 feet (length) with wheel 4 inches and finished with yellow and black powder coated paint, complete all as specified and directed. Make :- Sheetla Techno Industries, Arihant Security or equivalent.

Supply red HDPE Hexagonal road safety cone of 750mm height and weight 3.5 Kg, complete all as specified and directed. Make :- EHS India Service, Kay Vee Traders and Sheetla Techno Industries, Nilkamal or equivalent.

Supply 2 meter (belt length) polished stainless steel queue manager of size 950mm (height), base 320x320mm, diameter of pole 50mm with 1.6mm thickness, base plate diameter 200mm with 4mm thickness with all accessories, complete all as specified and directed. Make :- Regimen Soloution, Sheetla Techno Industries, Arihant Security or equivalent.

Notes :- An amount of Rs. 33,250.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum.

M/s A B CONSTRUCTION (BID ID -3081952)

M/S LUCKY BUILDERS (BID ID -3083618)

M/S FEROZ AHMED MIR (BID ID -3072117)

M/S RATHER CONSTRUCTION CO (BID ID -3076532)

M/S A.N CONSTRUCTIONs (BID ID -3071868)