REPAIRS TO SANITARY FITTINGS, TILING, PLASTERING, JOINERY, PATH, CHHAJJAS, LEAKAGE SEEPAGE, PERIODICAL SERVICES AND MISC B/R AND E/M WORKS AT MH AND DENTAL WARD AT NDA KHADAKWASLA

Amount

Dismantling floor or wall tiling of any description and size including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc including cleaning off premises where complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints,hacking for key ,scrubbing down with water etc complete all as specified and directed.

Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including cleaning off premises where complete all as specified and directed.

Taking down chowkhats or frame not exc 1.5 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frame not exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters exe 1 sqm and n.exc 2 sqm each and removing complete all as specified and directed.

Material and Labour for Joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but n exc 0.18 Sqm (400x400x7 to 8 mm thick) as in flooring etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile laid over & including 15 mm thick screed bed cement mortar (1:6) complete all as specified and directed

Material and Labour for Joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but n exc 0.18 Sq (400x400x7 to 8 mm thick) as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile laid over 10mm thick rendering in CM (1:6) complete all as specified and directed

Material and Labour for coloured Glazed ceramic tiles as in vertical surface of Size 350x 250 x7mm /450x350x7 mm set and jointed in neat cement slurry laid over 10 mm thick cement rendering in cement mortar 1:6 and pointed in white or colour cement to match the tile complete all as specified and directed

Material and Labour for Joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in flooring etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile laid over & including 15 mm thick screed bed cement mortar (1:6) complete all as specified and directed

Material and Labour for Joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile laid over 10mm thick rendering in CM (1:6) complete all as specified and directed

Material and Labour for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and incl 20 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed

M&L for 20 (+ /- 2mm) thick Granite (of jet black ) work (table rubbed and polished ) in steps ,jambs ,pillars,window cills, cooking plateforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified. Exposed edges to make half round complete all as specified and directed..

M & L machine cut superior quality Kota stone slab flooring 20-25 mm thick over cement screed , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete match including bulnosed to edges complete and incl 20 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed

Material and Labour for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile laid over & including 15 mm thick screed bed cement mortar (1:6) complete all as specified and directed

Material and Labour for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile laid over 10mm thick rendering in CM (1:6) complete all as specified and directed

M& L for complete removal of existing treatment of old wall to make the surface from dust, loose paint and loose plaster by scrapping manually / mechanically as directed by engr-in-charge (nails, screws if any to be removed properly before scraping) and two coat of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and directed

All as per item No 18 above but for Ceiling surface complete all as specified and as directed.

M&L for providing and applying water proof cement base putty of 3mm thick (avg) over prepared old plastered / old painted wall surface to prepare the surface even and smooth upto desired finishes by manually / mechanical means etc complete all as specified and directed.

Ditto all as per item No 20 above but for Ceiling surface complete all as specified and as directed.

M&L for preparing old painted surfaces of steel and iron surfaces over 10 cm in width or girth by cleaning, sand papering, brushing with wire brushes, scrapping by steel scrappers etc and applying one coat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based material of any description over 10cm width or girth by cleaning, sand papering,brushing etc , filling in cavities and cracks etc with approved filler and applying one coat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks complete all as specified and directed

Material and labour for prepartion of plastered or unplastered old deorated surfces by brooming down or steel wire brushing scraping down smoke soot mould moss efforescent salt & trading oil and grease spots and filling cracks/holes and applying one coat of oil bound distemper on wall surface complete all as specified and directed

Ditto all as per item No 24 above but for Ceiling surface complete all as specified and as directed.

M&L for preparation of plastered or unplastered old decorated surface of walls by brooming down or with steel wire brushing, scraping down, smoke soot's moulds, moss efflorescent salts& trading oil, greasy spots and filling cracks/holes by putty and applying one coat cement base paint walls complete all as specified and directed.

M&L for preparation of old surfaces (plastered or unplastered) of walls/ chajja/ roof projection surface by scrapping with manually as directed by Engr-in-charge and repair of external wall/Chajjas to be done with repair mortar to get even surface including preparation of old surface of wall/ceiling by filling cracks by crack fill paste good smoothen surface by sand paper and applying one coats of premium acrylic smooth exterior emulsion of approved colour and including necessary scaffolding at any height complete all as specified and directed.

Demolition of brick / block masonry / Stone masonry built in Cement mortar complete all as specified and directed.

M&L precast cement concrete (1:3:6) type C-1 (Using 20mm graded stone aggregate) block masonry with solid blocks exc10 cm thick in width and setting in cement mortar (1:6) complete in wall complete all as specified and directed.

M&L for Walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and directed.

M&L for flush pointing to random or polygonal rubble, uncoursed on brought upto courses in cement mortar (1:4) complete all as specified and directed.

Raking out joints/pointing to squared rubble masonry, coursed or uncoursed built in cement mortar complete all as specified and directed.

M&L for cement concrete (1:3:6) type C2 using 20mm graded stone aggregate in plinth protection, 75 mm thick, finished even and smooth without using extra cement, including making joints 12 mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen85/25 and sand in the proportion of (1:3) by weight complete all as specified and directed.

M&L for 15 mm thick cement plaster on brick or concrete surface in cement mortar1:6 included finishing surface even and smooth without using extra cement on walls etc complete all as specified and directed.

M&L for 10mm thick cement plaster on concrete surface in cement mortar1:3 included finishing surface even and smooth without using extra cement on ceiling etc complete all as specified and directed.

M&L for 15 mm thick cement plaster on brick or concrete surface in cement mortar1:4 included finishing surface even and smooth without using extra cement on walls etc complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over one coat of alkali registant priming paints etce complete all as specified and directed.

Ditto all as per item No 37 above here-in-before but in ceiling etc complete all as specified and directed.

M&L preparation of newly plastered surfaces of wall and applying two coats of cement base paint white or tinted including scaffolding arrangement, trestles, ladders etc complete all as specified and directed.

Taking down of existing tarfelt and cement plaster of any description and thickness on roof top including flashing and junction of parapet and cleaning existing roof top surface by brooming, wire brushing incl removing the debrish out complete all as specified and directed.

Demolition Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L Cement concrete Type B0 1:2:4 (12.5mm graded stone aggregate) in roof padding complete all as specified and directed.

M&L for 20mm thick rendering on concrete surface on roof in cement plaster 1:4 finished even and fair without using extra cement by using WPC @ 3% of wt of cement content complete all as specified and directed. Note: Water proofing Compound measured and paid seprately

Supply only Liquid water proofing compound complete all as specified and directed.

M&L for APP based modified pre fabricated five layer 3 mm thick and weighing not less than 3.6 Kg/Sqm water proofing membrane reinforced with polyester non woven fabric mat with 150 gm/Sqm black finished with compatible primer conforming to IS 3488 @ 0.30 Lit/ Sqm and bonding material 85/25 bitumen 1.2 Kg/Sqm before and after laying membrane laid by torch application side overlap of 75 mm and over lap of 100 mm longtitudinally, At the junction of roof and parapet wall a grove of 75mm wide and 65mm deep and shaping horizontal of groov withr 1:3 with bituminious mastic joints/overlap shall be sealed with hot bitumen 85/25 complete all as specified and directed.

Material and labour for providing cement concrete PCC (1:2:4) type B1 (20mm graded aggregate) as in coping to parapet wall/kerbs in roof with projection of 50mm from the outer surface with a groove of 12 mm x 12mm as drip course in bottom side including necessary form work etc complete all as specified and as directed

Demolition of lime / lean concrete in sunken floors etc of any description complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4 using 20 mm graded stone aggregate over 250 thick PCC 1:4:8 with 40mm graded stone aggregate as in filling of sunken floors over a layer of APP based modified pre fabricated five layer 3 mm thick and weighing not less than 3.6 Kg/Sqm water proofing membrane over a layer of bitumen cutback (85/25) grade applied hot (1.5 Kg/sqm) over 10mm thick plaster in cm 1:3 with WPC @ 3% by wt. of cement complete all as specified and directed. Note: Plan area of sunken portionshall be measured and paid

Taking down 15 mm bore mild steel tubing of medium grade and connections incl cleaning for refixing or removal from site complete all as specified and directed.

Ditto all as per above item No 49 above but for 20 mm bore

S&F 15 mm bore mild steel water tubing medium grade galvanized with all fittings and fixture fixed to walls ceiling or laid in floors complete all as specified and directed.

Ditto all as per above item No 51 above but for 20 mm bore

Supplying and laying of CPVC pipes 16MM dia SDR 11 & Plain CPVC SDR 11 fittings in trenches and fixed to wall , floor etc complete all as specified and directed.

Supplying and laying of CPVC pipes 20MM dia SDR 11 & Plain CPVC SDR 11 fittings in trenches and fixed to wall , floor etc complete all as specified and directed.

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth etc complete all as specified and directed.

S&F Rotational moulded polye- thylene water storage tanks 500 Ltr capacity three layered (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I (2009) including taking down of existing tank and removing to store and making good the surface before placing of new tank complete all as specified and directed.

S&F Rotational moulded polye- thylene water storage tanks 1000 Ltr capacity three layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I (2009) including taking down of existing tank and removing to store and making good the surface before placing of new tank complete all as specified and directed.

S&F in repairs sinks made of stainless steel lmm thick kitchen or aboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs of sink with drainage, made out of stainless steel 1mm thick, kitchen or laboratory with plugs, washes and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe over all size 915X460mm with bowl size 410X330X160mm complete all as specified and directed.

S&F 15mm dia tank Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm-45gms /25mm- 65gms) including taking down old one complete all as specified and directed.

S&F 20mm dia tank Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm-45gms /25mm- 65gms) including taking down old one complete all as specified and directed.

S&F Ball valves 15mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) including taking down old one complete all as specified and directed.

Ditto all as per Item No. 64 above but 20mm dia

S&F Bib taps 15mm dia, chromium plated ,fancy type ,cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed including taking down old one complete all as specified and directed.

S&F Stop valves 15mm dia, chromium plated ,fancy type, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed including dismantling of old one complete all as specified and directed

S&F in repair Bib tap 15mm dia standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms/ 20mm-125gms) complete all as specified and directed.

S& F in repair Stop valve 15mm dia of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms) complete all as specified and directed.

S&F in repair Pillar taps 15mm of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms) complete all as specified and directed.

S&F in repair Brass CP mixer 15mm dia for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125mm size complete as directed and sample to be approved complete all as specified and directed.

S&F in repairs for PVC flushing cistern valve less, syphonic action type low level, ball valve, float and handle with bracket fixed in repair of 10 ltrs capacity all as specified and directed including taking down old one complete all as specified and directed.

S&F for Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern including necessary cutting to floor tiles and connection to WC complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs, wash hand basins vitreous china flat back 450mmx300mm size white, first quality, with and including chromium plated waste grating 32mm size, PVC waste pipe 25mm bore heavy duty China and plug and porcelain stopper, brackets of Mild Steel angle iron (35mmx35mmx5mm) of suitable size including two coat of synthetic enamel paint over a coat of primer over angle iron brackets complete to walls complete all as specified and directed.

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed , screwed for iron pipe of bore 15 mm fixed complete all as specified and directed..

S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F Waste coupling of PTMT (half or full threaded) (Minimum weight 40 mm-45gms/40mm-60 gms) for 32mm bore dia pipe complete all as specified and directed.

S&F in repair towel rail 600 mm long of CP brass, fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F in repairs Low density polyethylene (LDPE) pipes 40mm dia of pressure rating 6kgf/sq. cm complete all as specified and directed.

S&F in repair doom grating 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

S&F in repair Grating doom 125/100 mm dia with waste hole of PTMT. (Minimum weight 40 gms) complete all as specified and directed.

S&F in repair Soap dish any type fixed to plugs with chromium plated brass screws minimum size 160x160x90mm complete all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves 15mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and direceted

S&F in repairs Gun-metal, globe or gate valves 20mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and direceted

S&F 35 mm thick factory made plain framed, panelled shutters with 2nd class hard wood rails and panel of 9mm BWP commercial ply 12mm thick veneered particle board with commercial veneers on both faces.The size of rail or style shall be as per IS 1003 Part-I Kiln seasoned and chemically pressure treated complete all as specified and directed

S&F 35 mm thick second class hardwood factory made glazed and skelton shutters open rebated and prepare to receive glass/ guage (with sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass/guage etc size of member etc size members of shutters as specified in SSR part I Section-8 clauses 8.24(b) supplied and fited to chowkhat made out of 2nd class hard wood, 35mm thick and styles 75mm wide complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supply and fixing in opening as per the specification and drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with hit moulded plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the tiles and rail with suitable PVC sheet bedding and joined together with solvent cement, supplying and fixing in the frame at site as per specificaton & drawing complete all as specified and directed.

S&F second class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed incl cutting holes and hold fasts fixing (split at one end) complete all as specified and directed.

S&F stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples , complete all as specified and directed.

S&F butt hinges cold rolled mild steel 100mm long medium weight complete all as specified and directed.

S&F extruded anodised aluminum alloy handle 125mm long fabricated type complete all as specified and directed.

S&F anodised aluminum barrel tower bolt of extruded section 150mm long complete all as specified and directed.

S&F aluminum alloy sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheets, cast of exctruded sections and fixing bolts of extruded section and complete all as specified and directed.

S&F 100mm Aluminium handles, cast type, anodised complete all as specified and directed.

S&F 75mm butt hinges cold rolled mild steel medium weight and fixed complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section 75mm long complete all as specified and directed.

S &F 30 mm thick Flush shutters ,solid core construction , with particle board core and plywood face panels , commercial type on both sides complete all as specified and directed.

M&L for second class hard wood glazed and skeleton shutter 30mm thick, factory made, open rebated and prepared to receive glass/gauge etc, sash bars, mitred and rebated, with edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, sizes of stiles, rails etc as specified in section 8, clause 8.24 (b) of SSR part-I(2009) complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces of any description ,not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F in repairs Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.

Hacking out old broken glass(any thickness, size, quality or discription) from wooden frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads complete all as specified and directed.

S&F Sheet glass 3 mm thick ordinary quality and glazing with oil putty incl wooden beads supply & fixing in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane complete all as specified and directed.

M&L for 25 mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on both faces complete all as specified and directed.

S&F contineous (piano) hinges, mild steel bright finish of 40 mm width of flaps(when open) complete all as specified and directed.

S&F Anodised aluminium frame powder coated for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Powder coated anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc complete all as specified and directed.

S&F Powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed.

S&F Powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F Aluminium (extruded section body) Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), and trap white (excluding flushing cistern and seat cover) including connection to drain (or outgoing pipe) and to fushing pipe, antisyphonage pipe etc complete all as specified and directed

S&F in repair Water closet (Squatt pattern) vitreous China squatting pan, ‘Orissa’ pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) connection to trap and squatting pan including P' trap set in and including concrete etc. including making good to floor complete all as specified and direted

S&F in repairs health faucet with double lock 1 meter brass plated stainless steel flexible hose and wall hook complete all as specified and directed

S&F in repairs harrison rails 20mm dia, mild steel, chromium plated with fixing brackets, stops, rollers etc.complete all as specified and directed

S&F in repairs T type brackets decorative type powder coated suitable for 20 mm dia complete all as specified and directed

M & L for 75 mm thick cement concrete 1:4:8 type D-2 using 40 mm size graded crushed stone aggregate as in floor etc complete all as specified and directed.

M&L for 100 mm thick cement concrete 1:2:4, type B-1 (using 20 size mm graded crushed stone aggregate) as in hard standing complete all as specified and directed.

M &L for forming expansion joints 100 mm deep x 12 mm wide filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, grade A complete all as specified and directed.

M&L for glossy finish machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment to match complete all as specified and directed.

M&L sand layer under floor of interlocking paver tiles incl watering and consolidation complete all as specified and directed.

M&L for glossy finish Chequered cement concrete tiles 30 cm x 30 cm x 25mm thick, set, jointed and pointed in neat cemeant slurry in floors with grey cement and pigment in floor over 20mm screed bed in cement mortar 1:6 complete all as specified and directed.

Dismantling of cast iron 100 mm bore pipes jointed in cement motar complete all as specified and directed.

Dismantling of cast iron 75 mm bore pipes jointed in cement motar complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or floor complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or floor complete all as specified and directed.

S&F for 75mm bore dia PVC (SWR) bends with access door complete all as specified and directed.

S&F for 75mm dia PVC (SWR) branch piece single(single Y) equal or unequal with access door complete all as specified and directed

S&F for 75mm dia PVC (SWR) vent cowl complete all as specified and directed

S&F for 100mm bore dia PVC (SWR) bends with access door complete all as specified and directed.

S&F for 100mm dia PVC (SWR) branch piece single(single Y) equal or unequal with access door complete all as specified and directed

S&F for 110mm dia PVC (SWR) vent cowl complete all as specified and directed

M&L for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed

Repair / maintenance of internal light fitting of any type like tube lights / wall bracket light fittings / ceiling lights / bulk head light / mirror lights etc in its position, testing all the compenents / parts, wiring etc, identifying and replacing the defective components like tube rod, side holders, holders, lamps etc and make the fitting functional complete all as specified and directed. Note: (i) The rate against the above mentioned item is deemed for cost of labour only . (ii) Cost of spares like capacitor, lamp holder, connector, connection wire etc. replaced against above mentioned item will be measured & paid for separately under respective items of Sch 'A' here-in-below. (iii) The contractor's representative will report to concerned JE E/M at 0900hrs daily to collect the list of defects and will submit the completion report on following day before 0900hrs to the JE E/M. (iv) The contractor shall rectify the defects and make the light fittings functional within 24 hours from the time the list of defective lights is handed over to him / his rep by the concerned JE E/M. In case the light fitting is not made functional for whatsoever reason within the specified time limit, an amount of Rs 100/- per such defective light fitting per day will be recovered from the amount due to him through RAR / Final Bill.The contractor shall engage separate team of technicians / repairer for each at Offr Md accn & Appointment houses/Guest houses.. (v) The contractor shall maintain proper record of repair / maint in a binded compliant register and complaint slip books duly signed by the user and bringing out the details of spares replaced and get it authenticated from concerned JE E/M on daily basis. The contractor shall put up the maint record register to Engineer-in-charge for inspection every Monday or as and when asked for. (vi) The contractor shall maintain sufficient stock of spares / material required for repair / maint of light fittings with the concerned JE E/M against the supply only items here-in-below.

Supply only following spares for light fittings of branded make as mentioned in the list of make enclosed with Particular specifications for replacement :- (a) Spring loaded G13 side holders (set of 2) suitable for 36/40W FTL fitting

(b) PVC / polycarbonate lamp holders batten/Angle type

S&F in replacement modular step type fan regulator 120W, 2 module complete all as specified and directed.

S&F in replacement modular switch piano type 10 amps one way one module complete all as specified and directed.

S&F in replacement modular switch piano type 20 amps one way one module with neon indicator complete all as specified and directed.

S&F in replacement modular Socket, 6A - 2/3 pin 2 module complete all as specified and directed.

S&F in replacement modular Socket, 6/16A - 2/3 pin 2 module complete all as specified and directed.

S&F in replacement of 1 module Blanking plates complete all as specified and directed.

S&F in replacement modular Bell push, 10 Amp with neon indicator one module complete all as specified and directed.

S&F in replacement modular switch piano type 10 amps Two way one module complete all as specified and directed.

S & F in replacement of switch piano flush type 5 Amps SP one way complete all as specified and directed.

S & F in replacement of switch piano type 15 Amps SP one way complete all as specified and directed.

S & F in replacement of switch socket combination 5/6 Amps flush mounted 5 pin multi purpose complete all as specified and directed.

S & F in replacement of switch socket combination 5/15 Amps flush mounted 3/5 pin multi purpose complete all as specified and directed.

S&F in replacement of socket 5/6 Amps flush mounted 3 pin complete all as specified and directed.

S&F in replacement of socket 5/15 Amps flush mounted 3/5 pin multi purpose complete all as specified and directed.

S&F in replacement for ceiling rose, 2 to 3 terminals /PVC/Polycarbonate, isolated body complete all as specified and directed.

M&L in replacment of fan regulator electronic step type suitable for 1200/1400 mm sweep fan as per the sample provided by the Engr-in-charge.

M&L in replacement of door bell AC 230 volts single phase ding dong type complete all as specified and directed.

M&L in replacement bell push, flush type 5 Amps complete all as specified & directed.

S & Ff RJ-11 telephone socket with transparent shutter 1 module alongwith flush metal box 2 module and front cover plate 2 module complete all as specified & directed. Make: Crabtree cat part no ACWKRXW112 or equivalent make as given in makes list of CA

S &F for TV socket with transparent shutter 1 module alongwith flush metal box 1 module and front cover plate 1 module complete all as specified & directed. Make: Crabtree cat part no ACWKTOG001 or equivalent make as given in makes list of CA

S&F ModularType C 2.1 A USB Charger complete all as specified & directed. Make:Crabtree cat part no ACWKRXG002 or equivalent make as given in makes list of CA

S & F in replacement of switch socket combination with box 5/6 Amps flush mounted 5 pin multi purpose complete all as specified & directed.

S & F in replacement of switch socket combination with box 5/15 Amps flush mounted 3/5 pin multi purpose complete all as specified & directed.

S& F PVC unbreakable surface boxes of size 4x4 complete all as specified & directed.

S& F PVC unbreakable surface boxes of size 6x6 complete all as specified & directed.

S& F PVC unbreakable surface boxes of size 4x7 complete all as specified & directed.

S& F PVC unbreakable surface boxes of size 6x8 complete all as specified & directed.

S& F PVC unbreakable surface boxes of size 8x10 complete all as specified & directed.

S&F in replacement for white cover plate with frame 1 or 2 module complete all as specified & directed.

S&F in replacement for white cover plate with frame 3 module complete all as specified & directed.

S&F in replacement for white cover plate with frame 4 module complete all as specified & directed.

S&F in replacement for white cover plate with frame 6 module complete all as specified & directed.

S&F in replacement for white cover plate with frame 8 module complete all as specified & directed.

S&F in replacement for white cover plate with frame 12 module complete all as specified & directed.

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 1 or 2 module complete all as specified & directed.

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 3 module complete all as specified & directed.

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 4 module complete all as specified & directed. .

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 6 module complete all as specified & directed.

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 8 module complete all as specified & directed.

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 12 module complete all as specified & directed.

Supply and lay Telephone cables for indoor applications up to 10 pair pvc insulated copper conductor wire including heavy duty non metalic PVC conduit, ISI marked, not less than 20 mm dia of thickness 1.8 mm concealed in wall, roof, etc, with all connected fittings from tag block to telephone outlet complete as required at site including making good surfaces and matching with the existing surface complete all as specified & directed.

Supply and drawing including termination of RG-11 cable for TV including heavy duty non metalic PVC conduit, ISI marked, not less than 20 mm dia of thickness 1.8 mm concealed in wall, roof, etc, with all connected fittings complete as required at site including making good surfaces and matching with the existing surface complete all as specified & directed. Make-Havells WHOJTTKARG11 or equivalent make as given in makes list of CA

Taking down carefully copper/aluminium point wiring (light/fan/socket) including all accessories wire, casing caping/conduit, screws etc and making good the disturbed surfaces complete all as specified & directed.

M&L point wiring with 1.5 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unsheathed cable and including surface, Non metalic rigid PVC casing capping double lock type/PVC conduit ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLSH cable size 1.5 sq mm copper conductor as earth wire to common earth dolly including PVC box, modular cover plate with frame suitable for modular type switches, sockets, fan regulator etc for following :- (a) One light/Fan point controlled by one way switch 6 Amps 240 volts

(b)Ditto all as per item no 181 above but One 3 pin 6 Amps socket out let point on independent board.

(c)Ditto all as per item no 181 above but One 3 pin 6 Amps socket out let point on same board.

(d)Ditto all as per item no. 25 above but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq mm size complete all as specified & directed.

(e)Ditto all as per item no. 184 above but One light point controlled by Two 2-way switches

M&L point wiring with 2.5 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unseathed cable and including surface, Non metalic rigid PVC casing capping double lock type ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLSH cable size 2.5 sq mm copper conductor as earth wire to common earth dolly including PVC box , modular cover plate with frame suitable for 15 Amps socket and switch outlet power point independent circuit complete all as specified & directed.

M&L for secruing loose wiring and repair to point wiring with necessary rigid non metalic PVC casing caping double lock type/ PVC conduit ISI marked of size not less than 25 mm inclusive all accessories complete all as specified & directed.

S&F flexible conduit pipe ivory grey in colour of dia not less than 25 mm complete all as specified and directed. Make: As per sample approved by Engr-in-charge

Taking down carefully sub main wiring of any type and size and making good disturbed surfaces complete all as specified & directed.

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 1.5 Sqmm , 1100 Volts grade in and including PVC Conduit/casing caping medium grade not less than 25 mm complete with conduit accessories and copper cable 1.5 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 1.5 Sqmm cable with 01 run of 1.5 Sqmm earth wire along with casing caping/conduit shall be measured as one RM

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 2.5 Sqmm , 1100 Volts grade in and including casing caping/conduit medium grade not less than 25 mm complete with conduit accessories and copper cable 2.5 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 2.5 Sqmm cable with 01 run of 2.5 Sqmm earth wire along with casing caping/conduit shall be measured as one RM

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 4 Sqmm , 1100 Volts grade in and including casing caping/conduit medium grade not less than 25 mm complete with conduit accessories and copper cable 4 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 04 Sqmm cable with 01 run of 4 Sqmm earth wire along with casing caping/conduit shall be measured as one RM

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 6 Sqmm , 1100 Volts grade in and including casing caping/conduit medium grade not less than 25 mm complete with accessories and copper cable 6 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 06 Sqmm cable with 01 run of 6 Sqmm earth wire along with casing caping/conduit shall be measured as one RM

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 10 Sqmm , 1100 Volts grade in and including casing caping/conduit medium grade not less than 25 mm complete with accessories and copper cable 10 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 10 Sqmm cable with 01 run of 10 Sqmm earth wire along with casing caping/conduit shall be measured as one RM

M&L for sub main wiring with Four single core PVC insulated FRLS cables with stranded copper conductors 4 Sqmm , 1100 Volts grade in and including casing caping/conduit medium grade not less than 25 mm complete with accessories and copper cable 4 sqmm continuous earth wire complete all as specified and directed Note: Four runs of 4 Sqmm cable with 01 run of 4 Sqmm earth wire along with casing caping/conduit shall be measured as one RM

M&L for sub main wiring with Four single core PVC insulated FRLS cables with stranded copper conductors 6 Sqmm , 1100 Volts grade in and including casing caping/conduit medium grade not less than 25 mm complete with accessories and copper cable 6 sqmm continuous earth wire complete all as specified and directed Note: Four runs of 6 Sqmm cable with 01 run of 6 Sqmm earth wire along with casing caping/conduit shall be measured as one RM

S&F in replacement factory made epoxy powder coated Distribution Board TP & N 4 way double door (VTPN MCCB DB ) MCCB as In comer, with metal door (IP-43 protection) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockout semi flush to wall and making good disturbed surface and touch up with the same finishes complete all as specified & directed. Note: MCBs/ MCCBs will be measured and paid seperately under respective Sch A item in the schedule

S&F in replacement MCB DB 12 way SPN double door sheet metal enclosure factory made suitable for MCB DB's 240 volts with 200 amp rated busbar, neutral & earthing link bar,surface mounting complete including taking down the existing DB of any type & size alongwith its accessories by removing from existing circuits and refixing the new DBs and circuits complete as reqd at site as directed by the Engr-in-Charge. Note - MCBs will be measured & paid separately under respective item of sch A, if required to be replaced.

(a) Dittto all as per item no 200 above but 08 way SPN DB (Double door)

(b) Dittto all as per item no 200 above but 04 way SPN DB (Single door)

(c)Dittto all as per item no 200 above but 04 way SPN DB (Double door)

(d)Dittto all as per item no 200 above but 02 way SPN DB (Single door)

S&F MCCB with rating of 100 Amps,415Volts 3pole with 16kA breaking capacity,thermal magnetic asdjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capcity (Icu). MCCB should be with suitable spreaders and phase barriers for each terminals complete all as specified and directed.

S&F MCCB with rating of 63 Amps,415Volts 3pole with 16kA breaking capacity,thermal magnetic asdjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capcity(Icu). MCCB should be with suitable spreaders and phase barriers for each terminals complete all as specified and directed.

S&F in replacement of C Curve MCB SP 6-32 Amps working on 240 volts,50 Hz 10 KA complete all as specified and directed.

S&F in replacement of C Curve MCB DP 6-32 Amps working on 240 volts,50 Hz 10 KA complete all as specified and directed.

S&F in replacement of C Curve MCB SPN 40-63 Amps working on 240 volts, 50 HZ,10 KA complete all as specified and directed.

S&F in replacement of C Curve MCB TP 40-63 Amps working on 240 volts, 50 HZ,10 KA complete all as specified and directed.

Supply and fix in replacement of C Curve MCB TPN 40-63 Amps working on 240 volts, 50 HZ,10 KA complete all as specified and directed.

Supply and fixing ceiling fan complete with blades, down rods and other accessories, 230 V, 1200 mm sweep with Minimum air delivery of 210 CMM BEE Five star rated with brushless direct current motor (BLDC), white/Ivory in colour complete all as specified and directed. Note: Old ceiling fan should be deposied in MES store

Dismantling and removing rusted louvers suitable for 225 to 600 mm sweep exhaust fan supply and fix MS louvers duly painted gray coloured suitable for 300mm heavy duty exhaust fan alongwith four number mounting bracket with bolts, nuts washers etc complete all as specified and directed. .

S&F in replacement of GI pipe ceiling fan down rod of 15 mm dia up to 1 mtr long for ceiling fan made out of 15 mm dia GI heavy grade pipe fixed on ceiling using suitable clamp including necessary new nut, bolt and washer complete all as specified and directed.

S&F in replacement sheet metal enclosures Single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 volts complete with all accessaries etc complete all as specified and directed.

S&F in replacement sheet metal enclosures Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 32 Amps, 240 volts complete with all accessaries etc complete all as specified and directed.

S&F in replacement plug top 3 pin, 15/16 amps, 230 volts, ISI marked heavy duty for geyser connection cord complete all as specified and directed.

S&F in replacement plug top 3 pin, 5/6 amps, 230 volts, ISI marked complete all as specified and directed.

S&F in replacement PVC insulated round cable 3 core stranded copper conductor 2.5 sqmm as in connection cord of the geyser complete all as specified and directed.

S&F in replacement PVC insulated cable 3 core stranded copper conductor 4 sqmm in and including PVC conduit pipe of dia not less than 25 mm complete all as specified and directed.

S&F for earthing complete with galvanised steel earth plate electrode 600x600x6.3mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia of minimum 15m length by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 in SSR PART-I connected to earthing test point all as specified or indicated including provision of earthing lead protection pipe, PCC earth pit with cover, excavation & earth work, testing on completion etc complete all as specified and directed.

M&L for supply, installation, testing and commissioning of chemical earthing (maintenance free earthing) Earthing Electrode 17.2mm Pure Copper Earthing Electrode 3mtr In length Copper Terminal of 100X50X5mm BFC Compound (Back Fill Compound) The BFC is carbide based having very high electrical conductivity.BFC having high moisture retaining capacity. BFC is hygroscopic, nonmagnetic and non-corrosive in nature and is ROHS Compliant Installation The Earthing electrode will be placed in the ground after a bore is drilled 120mm dia to the depth of 3.5mtr The Bore drilling will be done with the help of Pneumatic boring machine.50KG BFC will be placed in the bore to cover the Earthing rod from all sides. BFC will be poured in Slurry form in properly mixed condition Earth Pit Cover Square 300X300X240mm to be provided to cover the Earth Pit. Only supply of pit cover.The Earth pit Cover shall be made of Reinforced FRP and should be capable of carrying the weight of 5 tons complete all as specified and directed. Note:- (i) Rate included for testing,commisioning including checking of earth continuity and earth result complete all as specified and directed. (ii) Earthing result upto 2 Ohm shall be achieved. (iii) Earth copper strip beyond 7.5 m shall be measured and paid separately. (iv) Rate is included for boring of earthing of dia 150 mm X6 m in any type of strata

S & F copper earth continuity conductor or main earthing lead of size 25 x 3.15 mm fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or fixed to pole or any other indicated situtation for earthing with Porcelain insulator etc. as required complete all as specified and directed.

S&F in replacement 3mm thick white coloured hylam sheet (bakelite) for mounting switches complete all as specified and directed.

S&F in replacement of GI pipe bracket of 25 mm dia 1 mtr long bend to shape for street light fitting made out of 25 mm dia GI light grade pipe fixed on building/pole using suitable FI clamp including necessary new nut, bolt and washer complete all as specified and directed.

S&F in replacement LED building security light fiitting 20 W, IP-65 protection made up of die cast alluminium housing with high power LED as lighting source and lens embeded PC cover having TOP opening seperate driver compartment complete all as specified and directed. Make- Luker LSTE-20/ Havells ENDURACITYLITEPLAT PLUSSL20WLED757SASYBOPC / Wipro LR02-331-XXX-57-XX or equivalent make as given in makes list of CA

S&F 12 watt,230V surface and wall mounted warm white LED Mirror Light including connecting up with twin core twisted flexible copper condctor cable from ceiling rose complete all as specified and directed. Make- Luker LMCL 12 or equivalent make as given in makes list of CA

S&F in replacement 1x10 watt,230V surface and wall mounted LED batten light with polycarbonate housing and integrated electronic electronic driver including connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and directed.

S&F in replacement of 18/20watt,230V surface and wall mounted LED batten, extruded aluminium housing with polycarbonate diffuser and integrated electronic driver including connecting up with twin core twisted flexible copper condctor cable from ceiling rose complete all as specified and directed. Make- Luker LT5M20 / Havells ENDURALINEARNEOBS20WLED865SPCWH / Bajaj BCLAB 20W WH LED P

S&F in replacement 1x10 watt, 230V surface mounted LED downlight with white powder coated polycarbonate housing and pressure die-cast heat sink having high efficiency, including connecting up with twin core twisted flexible copper condctor cable from ceiling rose complete all as specified and directed. Make - Luker Cat part no. LBKRDSL10 / Havells INTEGRANEOSURFA CEDLS10WLED857S or equivalent make as given in makes list of CA

S&F Electronic driver suitable for 25/30 watts LED building security light fittings as per existing make complete all as specified and directed.

S&F in repalcement recess mounted 2' x 2' LED Panel lights 40 W LED 5700K, 240Volts and glare free symmetrical illumination suitable for Armstrong/Grid ceiling, Environmental friendly, new generation, energy saving, high power LED as a light source with clear diffuser and separate replaceable electronic driver including connecting with twin core wire and also matching to the adjacent ceiling surfaces carefully complete all as specified and directed. Note: The quoted price shall include the cost of Light and its driver. Make: Luker Cat Part: LPS40 or equivalent make as given in makes list of CA

Supply and fixing Infrared Presence Surface Mount Sensor for light fittings including connecting up with twin core twisted flexible copper cable to switch and fittingcomplete all as specified and directed. Make - Luker / Havells/Philips

Disconnecting and taking down existing userviceable geyser of 25/50/100 ltrs capacity of any make/brand, taking it to civil workshop for repairing. Opening the geyser and dismanting all parts and taking out inner tank/container, removing dents making to shape including welding / brazing the leakage portion, filling the portion between inner tank and out casing of geyser with new glass wool heat insulating material . Reassembling and painting the outer casing of geyser with two coats of superior quality synthetic enameled paint and re- fixing to original place complete all as specified and directed.

S&F in replacement thermostat and cutout set electronic type, temperature adjustable from 0-80⁰C suitable for geyser of 25 ltrs capacity complete all as specified and directed.

S&F in replacement heating element of capacity 2 KW of any type and shape suitable for Existing 25 ltrs capacity geysers as per sample provided by Engr-in-Charge

S&F in replacement flow unit (inner pipe assembly) suitable for geyser of 25 ltrs capacity of any brand/make and for vertical/Horizontal type including rubber ring/gasket complete all as specified and directed.

S&F in replacement metallic flexible hot water connection 600 mm long including necessary washers suitable for geysers of 25 ltr capacity complete all as specified and directed.

DARSHAN ENTERPRISES

Conceptice Enterprises

Sarkar Enterprises

Sunil Constructions