Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.5 LAccepted-AOC | L1 | Accepted-AOC being L1 | |
| 2 | L2₹50.1 L+₹35,865 (0.72%)Rejected-Finance | L2 | Rejected-Finance Rejected being L2 | |
| 3 | L3₹50.6 L+₹90,746.95 (1.82%)Rejected-Finance | L3 | Rejected-Finance Rejected being L3 | |
| 4 | L4₹51.5 L+₹1.7 L (3.48%)Rejected-Finance NO 422 CHURCH STREET NEW THIPPASANDRA BANGALORE 560075 | BANGALORE | BANGALORE | KARNATAKA | 560075 | L4 | Rejected-Finance Rejected being L4 | |
| 5 | L5₹51.5 L+₹1.7 L (3.51%)Rejected-Finance | L5 | Rejected-Finance Rejected being L5 |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
6 Jul 2020, 6:00 pmClosed
GE RD East Bangalore
GE RD East Bangalore 93
PROVISION OF MSYIR COMPLEX ADDN ALTN OF ENTRY EXIT GATES WITH PILLARS FOR SECURITY AT CABS PROVN OF DEDICATED POWER SUPPLY FOR EXISTING CAMERASIN GTRE AND RE CONSTRUCTION OF COMPOUND WALL AT ADA UNDER GEI RD EAST BANGALORE
2020_MES_348437_1
8948
Open Tender
Civil Works
Item Rate
270 days
GE I R AND D East Bangalore
D a (i) b (i)
9 documents required · 9 mandatory
₹500
Yes
GE I R AND D East Bangalore
₹88,000
Yes
27 Aug 2020
30 May 2020
10 Jul 2020
30 May 2020
6 Jul 2020
2 Jul 2020
1 Jun 2020 - 12 Jun 2020
Amount
Taking down chowkhats or frames with shutters (without taking off shutter from the frame ) wooden exceeding 1.5 Sqm but n exc 4 Sqm each complete all as directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (not backing) removing serviceable tiles to store and rubbish off the premises.
M&L for PCC 1:2:4, type B0, 30mm thick (using 12.50mm graded stone aggregate) as in flooring/ paving finished rough to receive cement tiles complete
M & L for vitrified ceramic tiles light shade Double charged 10 mm thick (square/rectangular) polished area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm in floors including 15 mm thick screed bed in CM (1:6) etc set and jointed in neat cement slurry and pointed in white or coloured complete all as specified and as directed
M&L for vitrified tiles 600mm x600mm in size and 10mm thick, dark shade, Double charged homogeneous finish as in floors, including contrast colour boarder tiles as directed,including 15 mm thick screed bed in CM (1:6) etc set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles complete all as specified and as directed
All as per item No 5 here in before, but as in vertical sufaces, such as skirting and dados including rendering 10mm thick in CM 1:4 on brick walls as backing coat complete all as specified and as directed
S & F for venetian blinds verical type 100 mm width with approved fabric and powder coated aluminium fittings such as top rails metal weight nylon button loops etc to match with the top rail metal base complete all as specified including dismantling unserviing one.
S & F 2nd class soft wood, plain solid straight chowkats and frame wrought framed rebated on the solid rounded or chamfered put together with glue pinned and joints complete all as specified and as directed
S & F Flush door shutters 40 mm thick solid core construction with particle face panels both side decorative face veneer with match to frame complete all as specified and as directed
S & F 100 mm butt hinges medium weight cold rolled mild steel complete all as specified and as directed
S&F 150mm size aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed
S&F 250mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cost or extruded sections and fixings bolts and slilding bolts of extruded sections and fixing bolts and sliding bolts of extruded section or case aluminium alloy complete all as specified and as directed
S&F 150mm size aluminium handle cast type anodised complete all as specified and as directed
M & L Prepration of surface of any description, over 10cm in width or girth, not otherwise described, two coat synthetic enamel paint over a coat of pink primer on wood surfaces complete all as specified and as directed
Removing of demolition / excavated materials to a distance exc. 5 KM, but n.exc 10.0KM and depositing out side MD land complete all as specified and as directed
Excavating in trenches, n exc 1.5 m wide and n. exc 1.5 m in depth; for foundation, manhole, pier holes etc & n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in hard /dense soil all as specified and directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed
Demolition cement Concrete of any description and in any position not otherwise specifically provided for
Demolition of reinforcement cement concrete in any description and in any position not otherwise specifically provided , (reinforcement cut as required to facilitate demolition ) below or above ground level.
M&L Cement concrete in foundation filling and mass concrete in type D2, 1:4:8 (using 40 mm graded stone aggregate) complete all as specified and as directed
M&L Hardcore of broken boulders guage n. exc 63mm, deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rolled/ rammed to a true surface, all as specified
M & L PCC 1 :2: 4, Type B1 ( using 12.5 mm graded stone aggregate) as in coping complete all as specified and as directed
M&L for RCC M-25 ( Design Mix ) (using 20 mm graded stone aggregate) as in foundation footings, foundation beam,plinth beams and bases of columns basement slabs, and mass concrete complete all as specified and as directed
M&L for RCC M-25 ( Design Mix ) (using 20 mm graded stone aggregate) as in columns pillers, piers, posts and struts complete all as specified and as directed
Use and waste the form work to sides of concrete fdn, footings plinth beam etc, vertical or to batter complete all as specified and as directed
Use and waste the form work to sides of pillars, posts, struts, piers, columns, fair finished surface complete all as specified and as directed
S & F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed
S & F TMT steel bars 5 to 10 mm dia in stirrups, spacers and binders complete all as specified and as directed
M & L 20 mm thick Granite as in wall cladding (of any type) platforms fix including cement mortar (1:4) and fastner nut pointing in white cement (1:2) us ing dust with admixture of pigment to match with shade of complete
Demolition of brick work or stone masonary/boulder masonary, built in cement mortar including all quions, arches,pillars etc but excluding ashar facings, dressed stone work and precast article etc and depositing of debris out side MD Land all as specified and directed.
M & L for Walling of random rubble (Bangalore type), regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and as directed
M & L for rendering 10 mm thick in cement mortar 1:4 on brick/concrete wall surfaces finished even and smooth with out using extra cement complete all as specified and as directed.
M&L applying 2 coats of Exterior emulsion weather proof paint over a coat of primer including complete removal of existing treatment on wall surfaces including cornices, plasters etc by scrapping/down with wire brushes and washing down and removing existing loose finishes particles etc all as specified and directed (Make/Brand Name : Asian Paints/Apex ultima, Berger Paints/Weather coat All Guard, Jenson /Nicholson/Safe Guard).
Dismantling of structural steel work including doors,gate etc complete all as specified and as directed.
S & F Mild steel frame work as in doors or gate/grills of angle section gusset plate rails ladder & Hand rail including welding securing bolts including cutting tops to shape as directed, drilling holes etc conforming to Fe 410 -O or Fe 310 - 0, complete all as specified and directed by Engineer-in-Charge
S & F Mild steel work as in doors or gate of ornamental and intricate design angle section gusset plate rails ladder & Hand rail including welding securing bolts including cutting tops to shape as directed, drilling holes etc conforming to Fe 410 -O or Fe 310 - 0, complete all as specified and directed by Engineer-in-Charge
M&L Preperation of steel surfaces and applying two coat of synthtic enamel paint over a coat of red oxide primer primer over 10cm in width or girth complete all as specified and as directed
M&L cement concrete work in pavments/hardstanding of flextural strength 40kg per sqcm in field using 400kgs cement per cum thickness of concrete 25cm or less finishing road surface by belting complete all as specified and as directed
Forming 20mm thick expantion joints for 200mm thick slab filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound grade 'A' complete all as specified and as directed
Forming contration (Dummy) joints 65mm deep x10mm wide filled with sealing compound grade 'A' complete all as specified and as directed
S&F Ms black sheet 1.6mm thick in steel gate cut to size holes punched including cuting and fixed steel frame complete all as specified and as directed
M&L brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius in cement mortar 1:6 for parapet walls / railings/ manholes etc complete all as specified and as directed
M & L RCC type B1 1:2:4 (using 20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed
Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide. complete all as specified and as directed
S & F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0
M & L broken glass coping in cement mortar 1:3 on top of walls complete all as specified and as directed
M&L for 15mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as directed
Rendering 15mm thick on other than fair face of brick work or one side of lathing without using extra cement with CM 1:4 complete all as directed
M&L Dubbing coat 10mm thick on irregular face of wall with cement mortar (1:4) for making architectural bands/groves/any type of shapes as required and as directed by EIC.
Supply only integral water proofing compound
M & L two coat of cement base paint over a coat of white wash on newly plastered surfaces of wall including preparing surfaces complete all as specified and as directed
M & L two coat of synthetic enamel paint on steel surfaces, over 10cm in width or girth, not otherwise described (red oxide primer shall be measured in respective item)
M & L one coat of red oxide primer over steel surfaces including preparation, over 10cm in width or girth, not otherwise described complete all as specified and directed
S&F for razor type concertina coil 600 mm dia, 9 SWG hot galvanised spring tensile wire, 145 to 150 Newton per square mm, zinc coating 250-300 gram per square metre, dia of coil when unstreched 600mm, minimum number of coil 10 per running metre after laying, hot dip galvanised razor ribbon tape of size 0.50 mm 19mm wide before wrapping on central core wire fixed with 1.66 mm thick GI clips 25 nos per running metre and special nut bolts , Hold "Z" coil together and extra two rows paralled wire of 10 gauge complete all as specified.
S&F as in repairs galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm, spacings & straining & fixing to any type of standard rails, straining, bolts, including securing or tying at crossings with & provision of galvanised mild steel wire, staples or steeel pins etc as directed (each line of wire to be measured)
Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting pointturning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed
S & F PVC (SWR) pipe (110 mm bore) single socketed in any length with rubber ring joints, fixed as in weep holes complete all as specified and as directed
Clearing of unwanted debris along the alignment of the wall including labour for necessary demolishion of irregular cemented deposits what so ever required to clear the line of new construction area before starting excavation complete all as directed. Note : Any useful material being decided by the EIC will be deposited with MES store yard without any cost for transportation and loading/unloading
Sub wiring complete with Multi stranded copper conductor size 4x16 sqmm PVC insulated, unsheathed,FRLS cable , 1100 volts grade conforming to IS 694 multistranded , drawn in and including rigid PVC surface type conduit / casing capping on walls/ floors/ ceiling etcwith and including metal flush boxes of suitable size and modular white plate with frame for mounting of fittings, modular type switches, regulator and also including 2x16 sqmm PVC insulated unsheathed copper cable green in colour as continuous earth continuity conductor and connecting to earth dolly, cutting chasis to the wall s/ floors/ ceiling and repairing with existing surface after work ,complete all as specified and directed for TP Sockets, Make :- Finolex/ Havells/RPG
Supply and fix 4 pole MCCB with mirco processer based release 630 Amps 50 HZ,415 Volt with 36 KA rupturing capacity lcs= 100% all as directed (Incommer) Make L&T / Scheider/Semins
Supply and fix double door TPN sheet metal enclosure 6 way Suitable for 600 Amp MCCB panel board all as directed (Load Side) Make : L&T/Standard/ Indo Asian
Supply and fix double door TPN sheet metal enclosure 4 way Suitable MCB for power sockets as directed Make : L&T/Standard/ Indo Asian
Supply and fix 3 pole M CCB 160 Amps ,415 V 25 KA capacity all as directed, Make L&T/ Semins/legrand
Supply and fix 4 pole MCB 63 Amps,415 V25 ka all as directed, Make L&T/ Semins/legrand
Supply and fix SP MCB 20 AMPs 240 volt all as directed, Make L&T/ Semins/legrand
Supply and Fix Four pole Enclouser for wall mounting Sockets all as directed, Make: indo-Asian/L&T/Havells
Supply and fix 4 pole M CCB 125 Amps ,415 V 25 KA capacity all as directed,Make L&T/ Semins/legrand
Supply and fix panel mounting Socket 380/ 415 Volt IP 66/67 , (3P+E ) all as directed,Make L&T/ Semins/legrand
Sub wiring complete with Multi stranded copper conductor size 4x10 sqmm PVC insulated, unsheathed,FRLS cable , 1100 volts grade conforming to IS 694 multistranded , drawn in and including rigid PVC surface type conduit / casing capping on walls/ floors/ ceiling etcwith and including metal flush boxes of suitable size and modular white plate with frame for mounting of fittings, modular type switches, regulator and also including 2x10 sqmm PVC insulated unsheathed copper cable green in colour as continuous earth continuity conductor and connecting to earth dolly, cutting chasis to the wall s/ floors/ ceiling and repairing with existing surface after work ,complete all as specified and directed
Point wiring complete with Multi stranded copper conductor size 1.5 sqmm PVC insulated, unsheathed,FRLS cable , 1100 volts grade conforming to IS 694 multistranded , drawn in and including rigid PVC surface type conduit / casing capping on walls/ floors/ ceiling etc with and including metal flush boxes of suitable size and modular white plate with frame for mounting of fittings, modular type switches, regulator and also including 1.5 sqmm PVC insulated unsheathed copper cable green in colour as continuous earth continuity conductor and connecting to earth dolly, cutting chasis to the wall s/ floors/ ceiling and repairing with existing surface after work ,complete all as specified and directed, Make :- Finolex/ Havells/RPG
Supply & fix Switch 6 Amps, modular type complete all as directed. Make :- Legrand/Anchor/CPL
Point wiring complete with Multi stranded copper conductor size 4 sqmm PVC insulated, unsheathed,FRLS cable , 1100 volts grade conforming to IS 694 multistranded , drawn in and including rigid PVC surface type conduit / casing capping on walls/ floors/ ceiling etcwith and including metal flush boxes of suitable size and modular white plate with frame for mounting of fittings, modular type switches, regulator and also including 4 sqmm PVC insulated unsheathed copper cable green in colour as continuous earth continuity conductor and connecting to earth dolly, cutting chasis to the wall s/ floors/ ceiling and repairing with existing surface after work ,complete all as specified and directed for 3 pin 15 amps socket outlet independently Make :- Finolex/ Havells/RPG
Supply & fix Switch 16 Amps, modular type complete all as directed. Make :- Legrand/Anchor/CPL
Supply & fix Socket 6A/16A - 2/3 pin combined 2 module, modular type complete all as directed. Make :- Legrand/Anchor/CPL
Taking down unservicable Fitting & Supply and fixing Recessed LED ceiling tile provided with a drop down acrylic diffuser to give more uniformity and up-lighting for a white balance effect Suitable for 600 x 600 mm modular ceiling LED luminaire with 36W LED . Make :- Havells/ Philips/CG
Taking down unservicable Fitting & Supply and fixing Recessed LED ceiling tile provided with a drop down acrylic diffuser to give more uniformity and up-lighting for a white balance effect Suitable for 600 x 600 mm modular ceiling LED luminaire with 28 W LED . Make :- Havells/ Philips/CG
Earthing complete with galvanised iron earth plate electrode 600x600x6 MM as earthing lead buried directly in ground vertically to depth not less than 2.25 mtr below GL with the top edge of the plate not less than 1.5 mtr from GL, connected to GI earth lead of 4.0mm dia, by means of bolts & nuts,to GI and connected to earthing test point all as shown in elecrical plate No-3 of SSR part -1 of 2009 * specified or indicated and testing on completion including excavation /earth work in any type of starta PCC (1:3:6) type C1 earthing chamber pre cast slab 50 mm thick in cement concrete (1 : 2 : 4 ) type B1 , Reinforced with welded steel wire fabric (XPM) weight not less than 4 KG /sqm cast iron frame ,funnel with wire mesh GI watering pipe of 20 mm bore medioum grade and lugs with and including GI earth wire 4 mm dia with GI proction pipe of 15 mm medium grade 7.5 meter grade 7.5 meter long etc complete all as specified. Note :- additional GI earth lead will paid as per site requirment on relvent item
Chemical earthing with copper earth plate 900x600 x5mm buried directly & preferable vertically in ground with top edge not less than 1.25 M below ground level connected with copper earth strip 32x6 mm connected to the earth test point all as specified and all as directed by the Engineer - in- Charge including testing and submission of test report, Note:- The rate quoted are inclusive of copper earth strip upto standard length and specification in the SSR Part -l , However additional earth strip length will be measured and paid separately
Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/GI pipe or fixed to poles or any other indicated situation for loop earthing 4 mm dia GI wire etc as required of complete all as specified and as directed
Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/GI pipe or fixed to poles/ wall/ or floor any other indicated situation for loop earthing etc as required of Copper strip 32x6 mm complete all as specified and as directed
Excavation in trenches not exc 1.5 mtr deep and not exc 1.5 mtr wide in hard soft/loose soil and getting out for laying under ground cable complete all as specified and as directed
Returning and filling in, levelling watering and well ramming in layers not exc 25 cms thick complete all as specified and as directed
Removal of surplus soil to a distance not exc 50 mtr and depositing where directed
M&L for sand filling in trenches above and below the cable for protection (punned thickness will be measured for payment) complete all as specified and as directed
Supply and laying bricks common burnt sub class 'B' designation 75, laid in trenches for protection of underground cable
Supply and laying GI tubing light grade100mm bore for protection of UG cable complete all as directed Make :- Jindal/Tata/Zenit
Supply and laying LT XLPE underground cable PVC insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade of 300 sqmm, 3.5 core in trenches/in pipe/on wall/on pole with all necessary Clamps, fitting & fixtures to fix the cable with standred support etc all as directed by Engr-in-Charge Make :- Havells/polycab/universal
M&L for providing trenchless bore using mechanical numatic drilling equipment for passing water pipe line upto 100mm dia under the existing bituminous/WBM road/PCC hard standings, depth range not less than 1.0 mtr and upto 1.5mtr and making good to the distrubed surfaces of road to match with its existing specifications all as specified and directed by engr-in-charge at site. Note : 1. Quoted rates deems to be inclusing of transportation charges of Drilling machine, connected accessories and passing pipe through bore complete with required accessories. 2. Pipe will be measured and paid separately.
Cutting the existing bituminiuos road to size not exc. 0.45 m X 0.45 mtr and depth not less than 45 cm for passing of UG Cable in road crossing and making good the disturbed surface of road as per its original specification complete all as directed.
Supply and fix 4 pole MCCB with mirco processer based release 600 Amps ,415 Volt with 35 KA rupturing capacity all as directed (Incommer) Make : L&T/Semines/ Legrand
Supply and fix metal enclouser 4 way double door to fix 4 pole MCCB (600 Amps) to existing panel in sub station with all fitting & fixtures & addition alteration to fit the panel all as directed (Incommer Side) Make :-/L&T/indo asian/legrand
Point wiring complete with Multi stranded copper conductor size 2.5 sqmm PVC insulated, unsheathed,FRLSH cable , 1100 volts grade conforming to IS 694 multistranded , drawn in and including rigid PVC surface type conduit / casing capping on walls/ floors/ ceiling etcwith and including metal flush boxesincluding 2.5 sqmm PVC insulated unsheathed copper cable green in colour as continuous earth continuity conductor and connecting to earth dolly, cutting chasis to the walls/ floors/ ceiling Make :- Finolex/ Havells/RPG
Supply and fix new generation 35 watt LED, decorative post-top ingirect light with energy saving, environmental friendly long life aesthetically designed with symetrical light distrubtion, spun aluminum land scape lumainaire with high power. Make :- Havells/ Philips/CG
Supply & laying ,testing of UG Cable XLPE insulated armoured heavy duty electric cable with aiuminum conductor 1100 volt grade layed in trenches /floor wall including connecting with suitable aluminum lugs a of size 4 x2sqmm. Make :- Havells/polycab/universal
Supply and laying GI tubing light grade 50 mm bore for protection of UG cable complete all as directed MAKE :- Jindal / Tata / Zenith
Supply & Fix single pole sheet metal encloser complete with single pole MCB 6 Amps 240 volt for Gate light fittings complete all as specified and as directed Make : L&T/Standard/ Indo Asian
Supply & Fix submain wiring complete with 2 run of 4 Sqmm PVC insulated and unsheathed cable with multistranded copper conductor confirming to IS 649, 1100 volts grade and drawn through and including suitable size of PVC non metallic rigid conduit accessories run on surface of wall /floors/ ceiling etc and connecting terminal ends including 1 x 4 sqmm PVC insulated unsheathed copper conductor cable green colour as continuos earth continuity conductor and connecting to earth dolly complete all as directed and specified for UPS power sockets Note : 2 runs of 4 sqmm PVC insulated unsheathed copper conductor and 1 run of 4 sqmm PVC insulated unsheathed copper conductor and 1 run of PVC conduit will be measured as single run
S&F MCBs distribution board of sheet metal enclosure factory made powder coated single pole and neutral 2 way 240 Volts 50 Hz complete all as specified and as directed
S& F MCB SPN 32 Amps 10 KA capacity 240 Volts all as directed Make :- Indo Asian C&S /CG/Legrand
Supply and fix modular switch 16 amps modular type 230 volts grade with frame and cover complete all as specified and as directed
Supply and fix modular socket 5/16 Amps 230 volts grade with frame and cover complete all as specified and as directed
AishwaryaConstructions
SAI CONSTRUCTIONS
Siddivinayaka Constructions
Maydini Constructions Co
ARCHANA CONSTRUCTION CO
Prashanth Associates
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .