Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹62.1 LAccepted-AOC | L1 | Accepted-AOC Lowest and negotiated tenderer | |
| 2 | L2₹66.6 L+₹4.3 L (6.89%)Rejected-AOC CHENNAI 600 005 | CHENNAI | CHENNAI | TAMIL NADU | 600005 | L2 | Rejected-AOC High rate tenderer |
Tender Value
Refer Docs
EMD Value
₹42,600
Closing Date
20 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Superintending Engineer/CC
No.132, E.V.R.Salai, Kilpauk, Chennai-10
Renovation of Gents and Ladies common toilet, Sales counter, Store room and Providing RCC roof slab for existing pump room for Tamil Nadu Text book Educational Services Corporation in EVK Sampath Maligai, DPI campus at Nungambakkam in Chennai city
2024_TNPHC_442970_1
SE/CC/DB/378/2024
Open Tender
Civil Works
Lump-sum
180 days
Nungambakkam in Chennai city
Please refer tender documents
7 documents required · 7 mandatory
₹0
₹42,600
20 Jun 2024
6 Mar 2024
22 Mar 2024
6 Mar 2024
20 Mar 2024
6 Mar 2024
Amount
1.1) Earth work excavation for foundation in all soils and sub soils to the required depth (including refilling) a) 0 to 2m depth
21.2) Supplying and fixing of Teak Wood wrought and put up a) Teak wood over 2.00 metre and below 3 metre length
b) Teak wood below 2.00 metre length
31) Weathering course
37.1) White washing 3 coats (slaked)
39) Supplying and fixing Mild Steel grills as per the design approved to verandah enclosure or gate
40) Painting - New "wood work"
41) Painting the new Iron work with two coats of approved first class synthetic enamel ready mixed paint
74) Charges for fixing of "Fan"
238) Applying one coat of Anticorrosive treatment for steel grills
Annexure 2.15) Supply and filling in foundation and basement with Stone dust in layers of 150mm thickness
3.1.3) Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly) for foundation using 40 mm gauge broken stone jelly
3.3.3) Plain cement concrete 1:8:16 using 40 mm broken brick jelly
6.2.2) Brick work in C.M. 1:5 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") a) In foundation and basement
8.2.3.1) Providing and laying in position, Standardised concrete Mix M30 Grade Concrete b) In Ground Floor
d) In Second Floor
e) In Third Floor
f) In fourth Floor
i) In Seventh Floor
k) In Ninth Floor
l) In Tenth Floor
9.2.2) Brick work in C.M. 1:6 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") b) In Gound Floor
10.2.2) Brick partition wall in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 114 mm thick (B.P.) d) In Second Floor
e) In Third Floor
f) In fourth Floor
i) In Seventh Floor
k) In Ninth Floor
l) In Tenth Floor
18.1) Providing Formwork using M.S.Sheet b.Plain surfaces such as Roof slab, floorslab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works
c.For Square and rectangular columns and small quantities
21.7.5) Supplying and fixing of Single leaf wood plastic composite door shutters Door size 900 mm x 2100mm
22.1.8) Supplying and fixing of Best Indian Teakwood panelled door shutters single leaf in position using 75mm x 37.5mm styles
22.1.2) Supplying and fixing of Wood Plastic Composite door frame of required size with good and durable quality, the WPC frame should be waterproof, swelling proof, bend and warp resistant
23.2.1) Supplying and fixing of 4mm thick pin headed Glass panels with Aluminium beadings
23.5.1) Supplying and fixing of hydraulic door closure of various sizes of approved ISI make universal type
27.3.1) Repair of RCC Isolated loaction by providing Polymer Modified Mortar by Chiping the corrosion damaged areas on the column/ slab
29.8.1) Glazed tiles using Grout (Tile Joint Filler), C.M 1:2, 10mm thick
29.9.1) Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler).
32.1.1) Finishing top of roof with one course of pressed tiles 23 x 23 x 2cm over a bed of C.M (1:3), 12mm thick mixed with water proof compound at 2% by weight of cement etc.
33.1.1) Plastering with CM 1:5 (One of cement and five of crushed stone sand) 20mm thick finished with neat cement
33.2.1) Plastering in C.M. 1:5, 12 mm thick.
35.2.1) Special Ceiling plastering in C.M. 1:3,10 mm thick.
37.3.2) White washing one coat using clean shell lime slaked
43.2.1) Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels binding wire insulated with PVC
52.1.1) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 of wall thickness not less than the specified in IS 4985 a) 32mm PVC pipe with necessary PVC/UPVC specials
b) 25mm PVC pipe with necessary PVC/UPVC specials
52.4.1) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of schedule 40 of wall thickness. Wherever required fully concealed wall c) 20mm ASTM D schedule 40 threaded PVC pipe with necessary UPVC specials
54.2.2) Supply and fixing of 15mm dia Engineering Polymer Tap short body tap
55.2.1) Supplying and fixing of approved brand Porcelain Flat Back urinal superior variety
56.4.1) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap- Other than Ground floor.
57) Supplying and fixing of EWC superior variety (white) 500mm with 'P' or 'S' trap
58.3) Supplying and fixing the following dia PVC (SWR) pipe including all required PVC specials etc., all complete., a) 110mm dia PVC SWR pipe
b.75mm dia PVC SWR pipe including all required PVC specials etc., all complete.,
58.4) Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.
60.1) Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety)
64.1.1) Wiring with 1.5 sq.mm copper PVC insulated unsheathed single 1.1 KV grade core / cable with continuous earth by means of 1.5 sq.mm copper PVC insulated wire. Open Wiring (PVC Box) a.Light Point with ceiling rose
64.1.2) Wiring with 1:5sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI make 5 amps flush type switch a) Light point with ceiling rose
b) light point with bakelite battern type holder
67.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.
68.2.1) Wiring with 1.5 sqmm copper P.V.C. insulated unsheathed single core 1.1.k.v. grade cable for 5 amps. 5 pin plug socket point at convenient places (Open wiring)
70.5.2) Supply and fixing of 4' long 18 W Crystal Glass LED tube Light with ISI mark
74.1) Supply and fixing of 19mm dia fan down rod of best approved quality confirming to IS Specification as a down rod rod to fix the fan for the required additional length etc.,
75.2) Supply and delivery of following Electric Ceiling fan a) 48" Electric fan 1200mm sweep
77.5.1) Supply and Run off main with 2 wires of 1.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cable (Open wiring)
93.2) Plastering with CM 1:4 (one of cement and four of curshed stone sand ) 12 mm thick mixed with water proofing compound (CICO) at the rate of 2 kg / 10 sq.m
93.3.2) Providing Polymer Coating (Water Proof Coating) for sunken portion of toilet with following specification and the surface shall be cleaned to remove all dust, foregin, matters lose materials or any other deposits of contamination by rubbing with wire brush.
96.6.1) Supplying and fixing of aluminium extruded section with powder coat of any color (Partition)
97.6.2) Aluminium Door (size:1.00x2.10m) Supplying and fixing of Aluminium extruded section with powder coating of any color as detailed below and anodized for 15 microns
102.2.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conforming to IS: 694/1990, 1.1.k.v. grade cable for Administrative block and Community cente controlled by 5 Ampsflush type switch including circuit mains, cost of all materials, specials, etc., all complete (open wiring) a) Light point with ceiling rose
103.1) Wiring with 1.5 sq.mm PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990,1.1 kv grade cable with suitable size MS Box concealed and covered with 3 mm thick laminated by hylem sheet for fan point for Administrative blocks and community center controlled by 5 Amps flush type switch (Open wiring)
106.2) Supply and run of 4 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour
112.1) Supplying and fixing of 225 mm dia sweep AC exhaust fan of approved ISI
207.3.5) Painting the old walls two coats with 1st class ready mixed plastic emulsion paint of best approved quality including thorough scrapping
207.4) Painting the old wood work with two coats of approved Ist class synthetic enamel paint including thorough scrapping
207.4.1) Painting the walls with two coats of 1st class ready mixed exterior emulsion paint of best approved quality colour and shade including a primer one coat
207.6) Painting the old iron work with two coats of ready mixed first class synthetic enamel paint including thorough scrapping the old paint
209.5.2) Clean removal of Cement plaster from walls / ceiling and racking out joint 20mm deep without damaging the existing structure and surroundings and clearing the debris 2km away from the site
213.1) Dismantling the damaged brick works in cement mortar in all floors without affecting the adjacent structures and clearing the debries 2km away from the site
219.5) Supply and fixing of Stepped Electronic 100W -1 Module Fan Regulator of approved (ISI) make and quality suitable for Ceiling fan
221) Removing the damaged broken door/window /ventilators including the removal of frames, hinges, fastenings and shutters from the existing structure and stacking the same carefully for reuse
224.1) Dismantling the damaged RCC by manual / by using deploying machineries without affecting the adjacent structures
228.2) Surface Preparation: Labor charges for chipping the spalled and old concrete of the column/slab and other elements.
236.2) Anti-corrosive Coating: Clean the rebars using the rust remover if there exists any rust, otherwise clean the rebar free of foreign material.
238.1) Applying one coat of Anticorrosive treatment for window grills
239.1.1) Labour charges for removing the existing damaged IWC and dismantling the brick jelly concrete in all floors without affecting the adjacent structures and including clearing debris 2km away from the site.
239.1.2) Removing the EWC in all floors without affecting the structure and clearing the debris 2km away from the site
239.2.1) Special Curing: Immediately after striking the form work or after completion of the repair works, the surface should be sprayed water
242.2.2) Dismantling the damaged Floor finish and dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Cuddapah Slabs/shahabad flooring without affecting the adjacent structures in all floors and including clearing debries 2km away from the site
243.2.2) Labour charges for removing the existing damaged urinals/washbasin without damaging the adjacent structure
254.2) Providing two legged scaffolding using 15cm diameter casurina props or best quality bamboo posts of 4m overall length b) 35.5m height in addition of 2.5m height
255.2) Supplying and fixing of LED Bulb for suitable for fixing it to pendent / bakelite battern holder of best approved variety a) 9watts LED bulb
343.2.3) Removing the damaged Galvalume sheets and MS truss in the places shown without affecting the existing structure etc., and stacking for reuse
344.5.2) Supply and Fixing of special type mirror of size 1000x780mm of approved quality and brand with necessary hard board backing
362.2.2) Supplying and fixing of Stain free nano polish Vitrified Tiles of size 600x600x8mm for flooring and other similar works
379.5.2) Supplying and laying of Jet black granite slab (Superfine polished with machine cut edges) of size 4'-0" x 2'-0" of 18 to 20mm thick for kitchen arrangements c) In Second Floor
d) In Third Floor
e) In Fourth Floor
h) In Seventh Floor
j) In Ninth Floor
k) In Tenth Floor
382.4.1) Supplying and fixing of 20mm thick (Jet Black) Granite slab, urinal Partition of size 60 x 90 cm fixed using angles with screws of suitable size of best quality
383.1) Providing Double Nosing to the edges of Granite slab
451.3.3) Supplying and fixing of best approved quality following water supply/sanitary fittings confirming to I.S. specification a) CP Angle cock
b) CP Heavy duty Bottle trap 32mm
c) CP two Way bib cock with health faucet
d) 15 mm dia SS swan neck tap.
e) Anodised Aluminium Towel Rail 60cm long and 20mm dia with Brackets
459) Supplying and fixing of oval shape wash hand basin of size 560 x 450mm of best approved quality with ISI mark
615.2.9) Removing existing damaged light, fan and wiring without affecting the adjustment structure.
832.5.2) Supplying and fixing in position of UPVC window of casement type ( open) for all sizes
832.5.3) Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes
832.5.5) Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (UPVC) sections.
980) Supplying and applying of Polyurethane (PU) Injection Grouting in terrace finding the leakage area, derailing the leakage area, inset the nozzle and injecting the Polyurethane (PU) foam chemical
dp constructions
Bidder Name
dp constructions
GANAPATHY BUILDERS
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_527265.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .