KKNagar toilet work 2

Amount

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to floor five level

1:5:10 (1 cement : 5 M sand : 10 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing, transporting, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in vertical & horizontal fins, individually or forming box louvers, setting in cement mortar 1:2 (1 cement : 2 coarse sand), including the cost of required centering, shuttering but, excluding the cost of reinforcement, with 1:1.5:3(1 cement : 1.5 M sand : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for :

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto floor V level level

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

Cement mortar 1:6 (1 cement : 6 M sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 5 in superstructure above plinth level up to floor V level.

Cement mortar 1:4 (1 cement :4 M sand)

Providing and fixing 18mm thick granite with table rubbed, edges rounded and polished on both sides, of required size , fixed in urinal partitions with stainless steel brackets, clamps and necessary hardware, including cutting, polishing edges, making holes, and fixing with approved screws as per direction of Engineer-in-charge and finished smooth.

Providing and laying Joint free Ceramic glazed Antiskid floor tiles of size 300x300 mm of approved make and colours, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 M sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with epoxy grouting with matching pigment etc., complete.

Providing and fixing joint free ceramic glazed wall tiles of size 300 x 450 mm of approved make and colour as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 M sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing the joints with white cement mixed with pigment of matching shade complete.

Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete

Providing and fixing 250x16 mm aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete

Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete

Supply & Fixing of WPC door frame and shutter of Qute or equivalent make with solid door frame extruded with size 75mm x 50mm. The inner core made of rigid WPC compound with minimum shore hardness of 55, and Bulk Density 800 Grms / Cub.Mt.. The frame shall be fixed onto the wall using 8 x 100mm long M.S fastener Screw fitted with polymeric nylon sleeve. A minimum of 4nos screws to be provided for each vertical member. Shutter made of 25mm (+/- 1mm) thick WPC Decora Door which is extruded as a single core door with Lead-Free compound. The door is designed homogeneously by Smooth Routing and 3D embossed grains on one side. The other side of the door shutter shall be plain mat finish. The door must be completely made by machine, without any post-production fabrication. The Solid WPC board shall have minimum Bulk Density 650 KG/ Cub.Mt. The door is to be hinged to the frame with minimum 3nos of 5 inch Stainless steel butt hinges and provided with 2 nos of 75mm Stainless steel tower bolt, 2 nos of 75mm Stainless steel handle .

Door size upto 0.80 x 2.10 metre with necessary fittings

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pressure class 4 kg/sqcm conforming to IS 4985 jointed with solvent cement all as directed

Single tee with door 75x75x75 mm

Single tee with door 110x110x110 mm

75 mm door bend 87.5°

110 mm door bend 87.5°

12 mm cement plaster of mix : 1:6 (1 cement: 6 P sand)

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 P sand)

6 mm cement plaster of mix : 1:3 (1 cement: 3 P sand)

Finishing walls with Acrylic smooth exterior paint of required shade including scrapping required :

Two or more coat applied @ 1.67 ltr/ 10 sqm

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

One or more coats on old work.

Dismantling 15 to 40 mm dia G.I. pipe/PVC pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer in-Charge. (a) Internal Work- Exposed on wall

Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer in-charge

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Of area 3 sq. metres and below

Dismantling tile work in floors,walls and roofs laid in cement mortar including stacking material within 50 metres lead.

For thickness of tiles 10 mm to 25 mm

Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :

75 to 110 mm dia pipe.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :

Kitchen sink with drain board 510x1040 mm bowl depth 250 mm.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with fittings, standard size PVC flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting including painting of fittings and cutting and making good the walls and floors wherever required

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Semi rigid pipe - 32 mm dia

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

Rectangular shape 453x357 mm

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

15 mm nominal bore.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 :

15mm nominal bore

Providing and fixing unplasticised PVC connection pipe with brass unions :

45 cm length 15 mm nominal bore

Providing and fixing PTMT grating of approved quality and colour.

Circular type. 100 mm nominal dia.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall

20 mm nominal outer dia .Pipes.

25 mm nominal outer dia .Pipes.

40 mm nominal outer dia. Pipes.

Providing and fixing CPVC ball valve with handle of approved quality :

25 mm nominal outer dia .Pipes.

Providing and laying brick jelly lime concrete on terrace / sunken floors with graded brick aggregate 25mm nominal size and 50% mortar comprising 1 lime putty ; 2 surki upto floor VII level

Providing and fixing urinal channel (trough type) of white glazed earthenware/ceramic of width150mm including cutting and making good the walls and floors, complete, fixed in cement mortar 1:4, as per direction of Engineer-in-Charge

12 mm cement plaster mixed with water proofing compound finished with a floating coat of neat cement of mix 1:4 ( 1 cement: 4 P sand).

Dismantling of Wash basin, Urinals,Water closet and sink of all types including necessary earth work, stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Providing and fixing unplasticised Rigid PVC pipes conforming to IS 4985 jointed with solvent cement including cutting the wall and making good with cement mortar 1:4 all complete.

50 mm diametre

Providing and fixing unplasticised Rigid PVC pipes conforming to IS 13592 Type B jointed with solvent cement including cutting the wall and making good with cement mortar 1:4 all complete.

75 mm diameter

110 mm diameter

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 M sand) and making good the wall etc. complete.

75 mm diameter

110 mm diameter

Providing and fixing PVC floor trap of self cleansing design including cost of cutting and making good the walls and floors :

Providing and fixing CP brass quarter turn bib cocks of approved brand.

15 mm nominal bore

Providing and fixing CP brass swivel type sink tap of approved brand.

15 mm nominal bore

Repair to plaster of thickness 12mm to 20 mm including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with water proofing material in cement plaster work in proportion recommended including disposal of rubbish, all complete as per the direction of Engineer-In- Charge.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. holder clamp to European type W.C. of Parryware / Hindware or equivalent make as approved by Engineer - in - charge.

Making aluminium ventilators using available materials with louvers channels with necessary screws etc complete and as directed by the Engineer in charge

Supplying and fixing pin headed glass of 4mm thickness for louvers in toilets and bath etc complete and as directed by the Engineer in charge

Removing and refixing the wooden door shutter after attending necessary repair etc., including sawing sides of shutters, door frames for making it operational condition all as per the direction of Engineer-in-charge.

Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire Brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge

25mm average thickness

Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge

Bars upto 12 mm diameter

Bars above 12 mm diameter

Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.

SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer.

Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge.

12 mm average thickness

25 mm average thickness in 2 layers.

Providing, mixing and applying SBR polymer (of approved make @ minimum 2% by wt. of cement used) modified plain/reinforced cement concrete for structural members having minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness.

50mm thick in Grade M 25 with cement content not less than 330 kg per cum

CREDIT in to contractors account of dismantled materials

C. P brass Bibcock/stopcock/pillar

G.I pipes

Door and windows