SPECIAL REPAIR TO BLDG NO P-5/7 OR LIVING ACCN AT JAMMU UNDER GE SATWARI

Amount

Taking down cement plaster of any description on brickwork including terrazzo topping or tiles racking out jointing hacking for key or roof plaster scrubbing down with water and removing all the demolished material outside Cantt area all as directed.

Demolition of Cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing all the demolished material outside Cantt area all as directed.

Rendering 15mm thick in CM 1:6 on brick wall surface or concrete surface inished even and fair without using extra cement all as directed.

Rendering 15mm thick in CM 1:4 on brick wall surface or concrete surface finished even and fair without using extra cement all as directed.

Rendering 10mm thck in CM 1:3 as in ceilings or concrete surfaces such as chajjas, upward facia, downward facias and similar items finished even of fair including dubbing coat without using extra cement upto any height including all necessary scaffolding all as directed.

Rendering 15 mm thick screed in CM 1:4 on brick wall surface or concrete surface as in skirting of Kota stone all as directed.

M&L for 25mm thick plain cement concrete1:2:4, type B-0 using 12.5 mm graded crushed aggregate as in sub base of floor all as directed.

M&L for Screed bed or bedding layer of mortar 20mm thick for laying floor finishes in cement mortar 1:4all as directed.

Supply only water proofing compound liquid all as directed.

M&L for 20 to 25 mm thick Machine cut Kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finish polishing complete all as specified and directed .

M&L for 20 to 25 mm thick Machine cut Kota stone slab in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finish polishing complete all as directed .

Taking down chowkat with shutter not exceeding 1.50 sq m including iron mongrey and making good in cement mortar in CM I:3 or cement concrete 1:2:4 type B-0 using 12.50 mm stone aggregate including applying two coats of existing surface finishes of the building complete all as directed .

Taking down chowkat with shutter exceeding 1.50 sqm not exceeding 4.00 Sqm including iron mongrey and making good in cement mortar in CM I:3 or cement concrete 1:2:4 type B-I including two coat of existing surfaces finishes of the building complete all as directed .

Taking down shutter of any description exceeding 1.00 but not exceeding 2.00 sqm each complete all as directed .

Taking down shutter of any description exceeding 1.00 but not exceeding 2.00 sqm each and refixed in same opening complete all as directed .

S&F Pressed steel frames of size 105x60 mm for doors with one or more rebates including mild steel hinges medium weight 100 mm long and 25x3 mm flat iron in holdfast, tie bar including necessary fixing lugs, lock strike plate and fixing arrangement etc., complete all as directed .

S&F Pressed steel frame of size 125x60mm for doors with double rebated including mild steel hinges medium weight 100 mm long and 25x3 mm flat iron in holdfast, tie bar including necessary fixing lugs, lock strike plate and fixing arrangement etc., complete all as directed .

Plain Cement Concrete 1:3:6 type C-0 using 12.50mm graded stone aggregate in pressed door frames complete all as directed .

S&F 35mm thick factory made 2nd Class hard wood (Sal) rail and style Plain framed, panelled shutter (two panel) with lock rail and panel of 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as directed .

S&F 2nd class 35mm thick hard wood (Sal) glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc but divided into squares, with plain, chamfered or rounded mitred and with edges of sash bars and framing moulded complete all as directed .

S&F factory made steel windows double shutter box type, outer frame made out of ERW TUBE 'P' section (65x45x25mm) and shutter of ERW TUBE 'P' section (50x35x20 mm) operable shutter side hunge incl pistol hinges with two Nos of MS tower bolt 150 mm size of each shutter steel handle and stoper of 'Z' section as specified complete with sash bars devetailed or welded ready for for glass fixing and wire gauge fixing with suitable fitting /openning for cooler/AC where required.Steel windows will be doubble shutter external glazed and internal wire gauge complete all as directed and as per Drg No CEPZ-324/07 1/3 to 3/3 . NOTE: The quoted rate shall be including of following:- (i) for provn of one shop coat of Zinc chromate primer on all exposed steel surface and one coat of coal tar on the end of steel frame in contact with brick/concrete surface (ii) 04 Nos MS steel lugs of 20x5 mm MS flat 20 cm long over all welded to frame (iii) PCC block for embedding lugs.

S&F MS framed work such as grills, gratings, etc., with end of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as directed .

S&F 3mm thick sheet glass ordinary quality and glazing oil putty in square not exe 0.5 sqm in each pane complete all as directed .

S&F galvanized mild steel wire cloth 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tank or galvanized wire staple complete all as directed.

S&F Mild steel barrel tower bolts, stove enameled black, with bright bolt and fixed 150mm complete all as directed .

S&F 150mm long Aluminium handles, cast type, anodised complete all as directed .

S&F Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300mm long complete all as directed .

Supply and fixing in repairs Helical door spring of size as required at site including welding to steel chowkhats, complete all as directed .

Demolition of brick work built in cement mortar including all quoin, arches pillars but excluding ashlar facing dressed stone work and precast concrete article complete all as directed .

Dismantling steel sheeting (corrugated, semi corrugated, etc.) sheets in roof coveringsn complete all as directed .

Dismantling timber scantlings of any size and description in section, in any position ( unframed work ) complete all as directed .

S&F 0.63mm thick galvanized corrugated mild steel sheeting Class 8 with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts , in roofs, walls with bitumen washer etc complete all as directed .

M&L for Brick work with sub class `B’ old size bricks straight or curved on plan exceeding 6.00mm mean radius in cm 1:6 with old size bricks complete all as directed .

All as per Item No 33 here-in-before but except bricks

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in Brick walls complete all as directed .

Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 using 20 mm graded stone aggregate as required Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exceeding half brick but not exceeding One brick complete all as directed .

M&L for Plain Cement Concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs and as in benching and similar work including necessary for work complete all as directed .

Supply and fixing Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe 290 Gde E-165 complete all as directed .

Supply and fixing Mild steel work as in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as directed .

Preparing new zinc (or galvanized) surface to receive painting, by coating with mordant solution including washing and cleaning, etc. over 10cm in width or girth, not otherwise described & applying two coats of synthetic enamel paint one over one coat of red oxide primer complete all as directed .

M&L for PCC 1:3: 6 75mm thick type C-2 using 40mm graded crushed stone aggregate finished even and fair in plinth protections complete all as directed .

M & L for complete removal of existing roof treatment including grubbing up of tree roots and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water all loose dirt/dust and appling the following roof treatment complete all as directed:- (a) Applying 1st course of 15mm thick screed bed in cement mortar 1:4 on concrete surfaces. (b) Applying 2nd course of bituminous primer conforming to IS-3384 @ 0.4 Kg/Sqm cover the surface till the surface properly impregnated and in solvent oil primer evoporate completely. (c) Applying 3rd course of APP (Atactic Polypropylene) modified polymeric membrane 3mm thick weight not less than 3.6 Kg/Sqm with 160 Grams/Sqm non woven polyester made at centre core reinforced laid with 75mm side overlap and 100 mm overlap . The membrane has to be laid with LPG torch and overlap sealed and finished neat. All joints and changes in direction should be covered with cement mortar 1:3 mixed with SBR latex @ 200ml/bag of cement and curved before laying membarance (d) Applying 4th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature of 180 degree Celcius and applying @ 1.2 Kg/Sqm

M&L for Plain cement concrete 1:2:4 type B-0 using 12.50mm graded aggregate as in roof padding and similar work complete all as directed .

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls bore 110mm including dismantling of old U/S pipes complete all as directed .

S&F PVC (SWR) bends any radius bore 110mm complete all as directed .

Applying two coats of synthetic enamel paint on wooden surface over one coat of pink primer including preparation of new surface over 10CM width or girth complete all as directed .

Applying two coats of synthetic enamel paint on steel surface over one coat of red oxide including preparation of new surface over 10CM width or girth complete all as directed .

Praparation of newly plastered surfaces and applying two coats of white wash on ceilings complete all as directed .

Applying two coats of white wash on ceilings all including preparation of old surface including taking down all peeling off white wash complete all as directed .

Preparation of newly plastered surfaces of wall and applying two coats distemper oil emulsion including priming of new surface with chalk whiting complete all as directed .

Preparation of newly plastered surfaces of wall and applying two coats of cement base paint including priming surface with chalk whiting complete all as directed .

M&L for Complete Removal of existing treatment and prapration of old decorated surface of wall including brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil, greasy spots and applying Two coat of Oil Bound Distemper on wall over a coat of chalk whiting and necessry filling complete all as directed .

Preparation of old decorated surfaces of ceilling and applying one coat of white wash complete all as directed .

Preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as directed .

Complete removal existing treatment/Finish including scrapping ,brooming down with steel wire brushing ,scrapping down smoke soot ,moulds ,moss and efflorecent salts , trading oil ,grassy spots and applying two coats of cement base paint over necessary filling work as and where required including all necessary scaffolding complete all as specified complete all as specified and as directed.

Taking down carefully aluminium conductor point wiring (light, fan, light socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as directed .

M&L for complete point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLS insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLS insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked terminated into CI/pressed steel terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and as directed for the following :- (a) One light/fan point controlled by one, one way switch 6 Amp complete

(b) One 3 pin socket outlet 6 amp independent

(c) One 3 pin socket outlet 6 amp same board

(d) One 3 pin 6 amps socket outlet independent but below the switch board of light points in the same vertical plane,

All as per srl item No 57 here-in-before but for one 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire.

S&F switch piano flush button single pole one way, 6 Amps, 240 V Make : Havells Cat Part No: AHESXXW061, HPL Cat Part No:SSTF6A1W,Anchor Penta Cherry White Code 14121

S&F socket outlet 2-in-1 5 pin, 6 Amps flush type complete all as specified and as directed.Make: Havells Cat Part No AHEKPOW063,HPL Cat Part No:SSTF6A5PS,Anchor Penta Sockets Code 14304

S&F Switch piano flush button single pole one way, 16 Amps, 230/240 V Make : Havells Cat Part No: AHESXXW201, HPL Cat Part No:SSTF16AS,Anchor Penta Cherry White Code 14401.

Socket outlet 2 in 1, 5 Pin, 6 & 16 Amps flush type complete all as specified and as directed. Havells Cat Part No: AHEKUXW063, HPL Cat Part No:SSTFS16A,Anchor Penta sockets.

Supply and fix Fan regulator 2 Module stepped type (electronic ) for 1200/1400mm sweep AC ceiling fan.Make: Havells Cap Part No: AHERFXW002,HPL Cat Part No:SSTFDFR,Anchor Deluxe White Code 14502

Supply and fixing ceiling rose surface, backelite, three terminal, 240 volts complete all as specified and directed.Make: Havells Cap Part No: AHEEIXW000,or equivalent in HPL CAT PART NO SSTFCR3P6A,Anchor CODE NO 39040

Supply and fixing LED tubelight fitting for 16-20 Watt LED, 230V, Batten type complete in all respect .Cat Part No DMLN1LT8-16 in Crompton or Cat Part No LHFYBYPNIA1W022 of Havells or Cat Part No BLRB-DB 118 of Bajaj .

Supply and fixing LED tubeRod in Cool Day light with superior aesthetic and heat dissipation capability suitable for G-13 base tubelights base fluorescent T8/T12 luminaire , 18-20 watt LED wattage with colour temp of 5700 K 2100 lumens and with surge arrestor complete in all respect.cat part No LTT8-20 of Crompton or Model LHLDCLXNUJ7Z018 of Havells or Cat part No BLRB 18W CW of Bajaj.

S&F complete energy saving new generation 10W LED IP65 bulk head luminary with opal diffuser complete all as specified and directed incl LED 10Watt. Make Havells Cat Part No LHEOAOP7UZ6W010 ,Surya Cat part No SLE BLH 10W or equivelant inCrompton ,Philips,Syska LED.

S&F of lamp holder,PVC /Polycarbonate type with back plate for batten fitting complete all as directed .

S&F LED lamp suitable for B22 holder of capacity 7 Watt. complete all as directed .

S&F Distribution Board (TPN) IP-43 and IK-09 protected fitted with fully insulated copper busbars,insulated neutral bar ,earth bar ,door earthing, Blanking plates double door suitable for 4 pole Isolator as incommer and out going MCBs 4 ways complete all as specified and directed. Note:- Isolator and MCBs shall be measured and paid separately. Make:- Legrand Cat apart No 607715 / Schneider(Acti-9)/Seimens(Betagard-8GB32)

S&F Distribution Board (SPN) IP-43 and IK-09 protected fitted with copper busbars, neutral bar ,earth bar ,door earthing, Blanking plates double door suitable for 240 volts 12 way Make:- Legrand Cat part No 607712/ Schneider(Acti-9)/Seimens(Betagard-8GB32)

S&F MCB SPN complete 32 Amp with rupturing capacity 10 KA 'C' series complete all as specified and directed. Make:Legrand (DX3)/ Schneider (Acti-9) / Seimens(Betagard-5SL4)

S&F MCB single pole 6 to 32 Amp with rupturing capacity 10KA, 'C' series all as specified and directed.Make:Legrand (DX3), or Schneider (Acti-9) / Seimens(Betagard-5SL4)

S&F Isolator 4 pole 63 Amps all as specified and directed.Make:Legrand (DX3), or Schneider (Acti-9) / Seimens(Betagard-5SL4)

S&F sub main wiring with single core cable 2x 6 sq mm FRLS insulated Unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1x6 Sq mm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface complete all as directed.

M&L for complete earthing with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 metre deep below normal ground level with top edge of the earth plate not less than 1.5 metre below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironl including PCC pit in PCC 1:2:4 type B-0 using 12.50 raded stone aggregate pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube flor watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as directed.

Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty electric cable of size 16 Sqmm, 4 core. with XLPE insulated screened PVC bedded aluminium stranded conductor served with inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed complete all as directed.

Excavation in trenches in any type of soil not exceeding 1.5metre wide and not exceeding 1.5 metre in depth for laying of under ground electric cable and getting out complete all as directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in any type of soil complete all as directed.

Removing excavated surplus materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting pointcomplete all as directed.

Supply and spreading sand dry, clean in trenches as cushioning to underground electric cable provided with a layer of 80mm deep before laying and 150mm over cable laid in trenches complete all as directed.( Note:- Punned thickness shall be measured and paid for)

Supply and laying dry bricks over cable laid in trenches as mechanical protection to cable with width equal to the length of bricks with well burnt sub class 'B' bricks complete all as directed.

M&L for tube light grade galvanized with all fitting and fixed complete to wall and ceiling or laid in floors of size 40 mm diameter including clamps wherever required complete all as directed.

M/S VED PAUL MAHAJAN

M/S shakti steel industries

M/S KEWAL MAHAJAN AND CO

Kanwal Nain Behl

M/S VIJAY KUMAR SHARMA

Tawi Constructions

N S MANHAS

STAR CONSTRUCTIONS

Continental Enterprises

M/S JAGDISH SINGH BANDRAL AND CO.

GURU KIRPA BUILDERS

M/S Shesh Paul Gupta

M/S PARAMJEET SINGH