REPAIR MAINT OF SUMMER EQUIPMENT AND E M REPAIR WORKS TO OFFRS MD ACCN AT AKHNOOR MIL STN UNDER GE N AKHNOOR

Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings and including making good the disturbed surfaces to match with existing surface and colour shade with putty and white cement at necessary holes for smooth finishing complete all as specified and directed complete all as specified and directed.

Point wiring complete with 1.5 sqmm PVC insulated, FRLSH type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade and including cutting, chasing work at any height and all accessories are concealed in walls / roofs / floors / ceiling etc. metal flush box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.60mm thick suitable for fixing of modular top cover plate and frame as per numbers of switch modules for modular switches,sockets,fan regulators,red colour indicator, blank plates etc as approved colours and including 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providing putty and white cement for smooth finishing of existing surface complete all as specified and directed for theOne light point/fan /bell point controlled by one switch. (Note:- All necessary accessories such as metal steel box,top cover plate, blank plate, screws,washers are to be used of same make/brand only and shall be deemed in to included in quoted rate only.)

Ditto all as per item No 2 here in before But One light point/fan /bell point controlled by one switch.

Ditto all as per item No 2 here in before But One 3 pin 5 amps socket point controlled by one 5 amps switch on same board .

Ditto all as per item No 2 here in before But One 3 pin 5 amps socket point controlled by one 5 amps switch on independent board .

Ditto all as per item No 2 above but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed for the following:-

Ditto all as per item No 2 here in before But One 6 Pin 16/6 amps socket outlet point controlled by one 16 amps switch on independent board.

Ditto all as per item No 2 above but here-in before but with 4 sqmm copper cables for one 15A, AC point complete.

Fan regulator modular type electronic compatible with BLDC fan, stepped type 100 Watts, 1 module 240Volts, AC ISI marked in repair complete all as specified and directed.

Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, in repair complete all as specified and directed.